[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=02899f01-15ab-4dd2-9fb9-803af39388e4 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd566fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd567000-0x00000000ddc65fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddc66000-0x00000000ddcf1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ddcf2000-0x00000000ddd93fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ddd94000-0x00000000dedcbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dedcc000-0x00000000dedccfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dedcd000-0x00000000dee0ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dee10000-0x00000000df232fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df233000-0x00000000df7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: MSI MS-7752/Z77A-G45 (MS-7752), BIOS V2.9 01/18/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FF0000000 write-back [ 0.000000] 2 base 410000000 mask FF8000000 write-back [ 0.000000] 3 base 418000000 mask FFC000000 write-back [ 0.000000] 4 base 41C000000 mask FFE000000 write-back [ 0.000000] 5 base 41E000000 mask FFF000000 write-back [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 16GB, type WB [ 0.000000] reg 1, base: 16GB, range: 256MB, type WB [ 0.000000] reg 2, base: 16640MB, range: 128MB, type WB [ 0.000000] reg 3, base: 16768MB, range: 64MB, type WB [ 0.000000] reg 4, base: 16832MB, range: 32MB, type WB [ 0.000000] reg 5, base: 16864MB, range: 16MB, type WB [ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC [ 0.000000] total RAM covered: 16368M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 8GB, type WB [ 0.000000] reg 5, base: 16GB, range: 512MB, type WB [ 0.000000] reg 6, base: 16880MB, range: 16MB, type UC [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41ee00000-0x41effffff] [ 0.000000] [mem 0x41ee00000-0x41effffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41edfffff] [ 0.000000] [mem 0x41c000000-0x41edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdd566fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdd3fffff] page 2M [ 0.000000] [mem 0xdd400000-0xdd566fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xddc66000-0xddcf1fff] [ 0.000000] [mem 0xddc66000-0xddcf1fff] page 4k [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdedcc000-0xdedccfff] [ 0.000000] [mem 0xdedcc000-0xdedccfff] page 4k [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdee10000-0xdf232fff] [ 0.000000] [mem 0xdee10000-0xdeffffff] page 4k [ 0.000000] [mem 0xdf000000-0xdf1fffff] page 2M [ 0.000000] [mem 0xdf200000-0xdf232fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdf7f4000-0xdf7fffff] [ 0.000000] [mem 0xdf7f4000-0xdf7fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x348ec000-0x3646dfff] [ 0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000ddd84078 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000ddd8dfc8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000ddd84188 009E3A (v02 ALASKA A M I 00000022 INTL 20051117) [ 0.000000] ACPI: FACS 00000000ddd92080 000040 [ 0.000000] ACPI: APIC 00000000ddd8e0d8 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000ddd8e170 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000ddd8e1b8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000ddd8e1f8 0007CA (v01 Intel_ AoacTabl 00001000 INTL 20091112) [ 0.000000] ACPI: HPET 00000000ddd8e9c8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000ddd8ea00 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 00000000ddd8ed70 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000ddd8f720 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR 00000000ddd901b8 000080 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41effffff] [ 0.000000] NODE_DATA [mem 0x41efe8000-0x41efecfff] [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdd566fff] [ 0.000000] node 0: [mem 0xddc66000-0xddcf1fff] [ 0.000000] node 0: [mem 0xdedcc000-0xdedccfff] [ 0.000000] node 0: [mem 0xdee10000-0xdf232fff] [ 0.000000] node 0: [mem 0xdf7f4000-0xdf7fffff] [ 0.000000] node 0: [mem 0x100000000-0x41effffff] [ 0.000000] On node 0 totalpages: 4180415 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14121 pages used for memmap [ 0.000000] DMA32 zone: 903715 pages, LIFO batch:31 [ 0.000000] Normal zone: 51136 pages used for memmap [ 0.000000] Normal zone: 3272704 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd567000-0xddc65fff] [ 0.000000] PM: Registered nosave memory: [mem 0xddcf2000-0xddd93fff] [ 0.000000] PM: Registered nosave memory: [mem 0xddd94000-0xdedcbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdedcd000-0xdee0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf233000-0xdf7f3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041ec00000 s86400 r8192 d24192 u262144 [ 0.000000] pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4115073 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-37-generic root=UUID=02899f01-15ab-4dd2-9fb9-803af39388e4 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16347648K/16721660K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 374012K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3299.864 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6599.72 BogoMIPS (lpj=13199456) [ 0.000003] pid_max: default: 32768 minimum: 301 [ 0.000022] Security Framework initialized [ 0.000035] AppArmor: AppArmor initialized [ 0.000036] Yama: becoming mindful. [ 0.000773] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003743] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.005069] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.005082] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.005255] Initializing cgroup subsys memory [ 0.005259] Initializing cgroup subsys devices [ 0.005260] Initializing cgroup subsys freezer [ 0.005261] Initializing cgroup subsys blkio [ 0.005262] Initializing cgroup subsys perf_event [ 0.005264] Initializing cgroup subsys hugetlb [ 0.005279] CPU: Physical Processor ID: 0 [ 0.005280] CPU: Processor Core ID: 0 [ 0.005283] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.005283] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.005554] mce: CPU supports 9 MCE banks [ 0.005564] CPU0: Thermal monitoring enabled (TM1) [ 0.005572] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.005572] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.005572] tlb_flushall_shift: 2 [ 0.005664] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.006538] ACPI: Core revision 20131115 [ 0.010236] ACPI: All ACPI Tables successfully acquired [ 0.021047] ftrace: allocating 28541 entries in 112 pages [ 0.031028] dmar: Host address width 36 [ 0.031030] dmar: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.031035] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.031036] dmar: RMRR base: 0x000000ddbfc000 end: 0x000000ddc09fff [ 0.031104] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0 [ 0.031105] HPET id 0 under DRHD base 0xfed90000 [ 0.031159] Enabled IRQ remapping in x2apic mode [ 0.031159] Enabling x2apic [ 0.031160] Enabled x2apic [ 0.031164] Switched APIC routing to cluster x2apic. [ 0.031544] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071186] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (fam: 06, model: 3a, stepping: 09) [ 0.071191] TSC deadline timer enabled [ 0.071197] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.071201] ... version: 3 [ 0.071202] ... bit width: 48 [ 0.071203] ... generic registers: 4 [ 0.071203] ... value mask: 0000ffffffffffff [ 0.071204] ... max period: 0000ffffffffffff [ 0.071205] ... fixed-purpose events: 3 [ 0.071205] ... event mask: 000000070000000f [ 0.072316] x86: Booting SMP configuration: [ 0.085691] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072318] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.166004] x86: Booted up 1 node, 8 CPUs [ 0.166007] smpboot: Total of 8 processors activated (52797.82 BogoMIPS) [ 0.172625] devtmpfs: initialized [ 0.174778] EVM: security.selinux [ 0.174779] EVM: security.SMACK64 [ 0.174780] EVM: security.ima [ 0.174780] EVM: security.capability [ 0.174810] PM: Registering ACPI NVS region [mem 0xddcf2000-0xddd93fff] (663552 bytes) [ 0.174817] PM: Registering ACPI NVS region [mem 0xdedcd000-0xdee0ffff] (274432 bytes) [ 0.175355] pinctrl core: initialized pinctrl subsystem [ 0.175393] regulator-dummy: no parameters [ 0.175420] RTC time: 15:27:59, date: 09/21/15 [ 0.175441] NET: Registered protocol family 16 [ 0.175511] cpuidle: using governor ladder [ 0.175512] cpuidle: using governor menu [ 0.175533] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.175534] ACPI: bus type PCI registered [ 0.175535] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.175571] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.175573] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.180089] PCI: Using configuration type 1 for base access [ 0.180755] bio: create slab at 0 [ 0.180863] ACPI: Added _OSI(Module Device) [ 0.180864] ACPI: Added _OSI(Processor Device) [ 0.180865] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.180866] ACPI: Added _OSI(Processor Aggregator Device) [ 0.182746] ACPI: Executed 1 blocks of module-level executable AML code [ 0.184679] ACPI: SSDT 00000000ddc13018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.184908] ACPI: Dynamic OEM Table Load: [ 0.184909] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.188593] ACPI: SSDT 00000000ddc14a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.188840] ACPI: Dynamic OEM Table Load: [ 0.188841] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.192480] ACPI: SSDT 00000000ddc15c18 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.192703] ACPI: Dynamic OEM Table Load: [ 0.192705] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.197166] ACPI: Interpreter enabled [ 0.197170] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.197173] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.197182] ACPI: (supports S0 S3 S4 S5) [ 0.197183] ACPI: Using IOAPIC for interrupt routing [ 0.197202] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.197304] ACPI: No dock devices found. [ 0.201413] ACPI: Power Resource [FN00] (off) [ 0.201463] ACPI: Power Resource [FN01] (off) [ 0.201510] ACPI: Power Resource [FN02] (off) [ 0.201557] ACPI: Power Resource [FN03] (off) [ 0.201603] ACPI: Power Resource [FN04] (off) [ 0.201979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.201983] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.202123] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.202206] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.202609] PCI host bridge to bus 0000:00 [ 0.202610] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.202612] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.202613] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.202614] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.202615] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.202616] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.202617] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.202618] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.202619] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.202620] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.202622] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] [ 0.202627] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 0.202690] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.202712] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.202744] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.202786] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.202807] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit] [ 0.202870] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.202905] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.202928] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.202949] pci 0000:00:16.0: reg 0x10: [mem 0xf7219000-0xf721900f 64bit] [ 0.203018] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.203082] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.203100] pci 0000:00:1a.0: reg 0x10: [mem 0xf7217000-0xf72173ff] [ 0.203182] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.203227] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.203253] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.203266] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit] [ 0.203325] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.203363] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.203383] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.203453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.203492] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.203512] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.203582] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.203621] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.203649] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.203668] pci 0000:00:1d.0: reg 0x10: [mem 0xf7216000-0xf72163ff] [ 0.203749] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.203794] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.203816] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.203962] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.203978] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.203984] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.203990] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.203996] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.204003] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.204009] pci 0000:00:1f.2: reg 0x24: [mem 0xf7215000-0xf72157ff] [ 0.204047] pci 0000:00:1f.2: PME# supported from D3hot [ 0.204097] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.204110] pci 0000:00:1f.3: reg 0x10: [mem 0xf7214000-0xf72140ff 64bit] [ 0.204128] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.204215] pci 0000:01:00.0: [10de:0fc6] type 00 class 0x030000 [ 0.204223] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.204232] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.204240] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.204245] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.204251] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.204307] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300 [ 0.204315] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.212420] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.212422] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.212424] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.212426] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.212478] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.212554] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.212573] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.212605] pci 0000:03:00.0: reg 0x18: [mem 0xf7104000-0xf7104fff 64bit pref] [ 0.212625] pci 0000:03:00.0: reg 0x20: [mem 0xf7100000-0xf7103fff 64bit pref] [ 0.212712] pci 0000:03:00.0: supports D1 D2 [ 0.212714] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.212748] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.224415] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.224418] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.224421] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff] [ 0.224440] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.224734] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.224768] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.224801] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.224835] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.224867] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.224899] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.224932] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.224964] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.225115] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.225119] ACPI: \_SB_.PCI0: notify handler is installed [ 0.225156] Found 1 acpi root devices [ 0.225220] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.225221] vgaarb: loaded [ 0.225221] vgaarb: bridge control possible 0000:01:00.0 [ 0.225317] SCSI subsystem initialized [ 0.225347] libata version 3.00 loaded. [ 0.225360] ACPI: bus type USB registered [ 0.225368] usbcore: registered new interface driver usbfs [ 0.225373] usbcore: registered new interface driver hub [ 0.225395] usbcore: registered new device driver usb [ 0.225464] PCI: Using ACPI for IRQ routing [ 0.226864] PCI: pci_cache_line_size set to 64 bytes [ 0.226897] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.226898] e820: reserve RAM buffer [mem 0xdd567000-0xdfffffff] [ 0.226900] e820: reserve RAM buffer [mem 0xddcf2000-0xdfffffff] [ 0.226901] e820: reserve RAM buffer [mem 0xdedcd000-0xdfffffff] [ 0.226902] e820: reserve RAM buffer [mem 0xdf233000-0xdfffffff] [ 0.226903] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff] [ 0.226904] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 0.226953] NetLabel: Initializing [ 0.226954] NetLabel: domain hash size = 128 [ 0.226954] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.226963] NetLabel: unlabeled traffic allowed by default [ 0.226996] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.226999] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.229021] Switched to clocksource hpet [ 0.231809] AppArmor: AppArmor Filesystem Enabled [ 0.231821] pnp: PnP ACPI init [ 0.231827] ACPI: bus type PNP registered [ 0.231872] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.231874] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.231882] pnp 00:01: [dma 4] [ 0.231890] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.231901] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.231956] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.231981] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.231983] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.231984] system 00:04: [io 0xffff] has been reserved [ 0.231985] system 00:04: [io 0xffff] has been reserved [ 0.231986] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.231988] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.231989] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.231990] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.231991] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.232010] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.232037] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.232039] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.232153] system 00:07: [io 0x0a00-0x0a0f] has been reserved [ 0.232155] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.232259] pnp 00:08: [dma 0 disabled] [ 0.232286] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.232315] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.232316] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.232332] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.232483] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.232485] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.232486] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.232487] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.232489] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.232490] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.232491] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.232492] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.232494] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.232495] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.232496] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.232584] pnp: PnP ACPI: found 12 devices [ 0.232585] ACPI: bus type PNP unregistered [ 0.238216] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.238218] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.238220] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.238222] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.238225] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.238234] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.238236] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.238240] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff] [ 0.238247] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.238248] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.238249] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.238251] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.238252] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.238253] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.238254] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.238255] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.238256] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.238257] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.238258] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.238259] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.238261] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.238262] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.238263] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.238281] NET: Registered protocol family 2 [ 0.238433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.238599] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.238700] TCP: Hash tables configured (established 131072 bind 65536) [ 0.238710] TCP: reno registered [ 0.238722] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.238762] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.238822] NET: Registered protocol family 1 [ 0.239162] pci 0000:01:00.0: Boot video device [ 0.239172] PCI: CLS 64 bytes, default 64 [ 0.239207] Trying to unpack rootfs image as initramfs... [ 0.551700] Freeing initrd memory: 28168K (ffff8800348ec000 - ffff88003646e000) [ 0.551708] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.551710] software IO TLB [mem 0xd9567000-0xdd567000] (64MB) mapped at [ffff8800d9567000-ffff8800dd566fff] [ 0.551930] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x16 [ 0.551936] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x16 [ 0.551939] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x16 [ 0.551944] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x16 [ 0.551949] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x16 [ 0.551953] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x16 [ 0.551957] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x16 [ 0.551962] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x16 [ 0.551999] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.552001] Scanning for low memory corruption every 60 seconds [ 0.552171] Initialise system trusted keyring [ 0.552200] audit: initializing netlink socket (disabled) [ 0.552207] type=2000 audit(1442849279.532:1): initialized [ 0.571248] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.572012] zbud: loaded [ 0.572106] VFS: Disk quotas dquot_6.5.2 [ 0.572130] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.572376] fuse init (API version 7.22) [ 0.572420] msgmni has been set to 31984 [ 0.572451] Key type big_key registered [ 0.572772] Key type asymmetric registered [ 0.572773] Asymmetric key parser 'x509' registered [ 0.572791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.572827] io scheduler noop registered [ 0.572828] io scheduler deadline registered (default) [ 0.572842] io scheduler cfq registered [ 0.572962] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X [ 0.573159] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.573168] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.573192] intel_idle: MWAIT substates: 0x1120 [ 0.573193] intel_idle: v0.4 model 0x3A [ 0.573194] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.573292] ipmi message handler version 39.2 [ 0.573339] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.573343] ACPI: Power Button [PWRB] [ 0.573362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.573364] ACPI: Power Button [PWRF] [ 0.573399] ACPI: Fan [FAN0] (off) [ 0.573414] ACPI: Fan [FAN1] (off) [ 0.573430] ACPI: Fan [FAN2] (off) [ 0.573445] ACPI: Fan [FAN3] (off) [ 0.573459] ACPI: Fan [FAN4] (off) [ 0.580901] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.580903] ACPI: Thermal Zone [TZ00] (28 C) [ 0.581038] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.581039] ACPI: Thermal Zone [TZ01] (30 C) [ 0.581053] GHES: HEST is not enabled! [ 0.581100] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.601482] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.602336] Linux agpgart interface v0.103 [ 0.603075] brd: module loaded [ 0.603451] loop: module loaded [ 0.603659] libphy: Fixed MDIO Bus: probed [ 0.603707] tun: Universal TUN/TAP device driver, 1.6 [ 0.603707] tun: (C) 1999-2004 Max Krasnyansky [ 0.603731] PPP generic driver version 2.4.2 [ 0.603760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.603763] ehci-pci: EHCI PCI platform driver [ 0.603838] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.603842] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.603852] ehci-pci 0000:00:1a.0: debug port 2 [ 0.607752] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.607767] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7217000 [ 0.616656] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.616681] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.616682] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.616683] usb usb1: Product: EHCI Host Controller [ 0.616684] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd [ 0.616685] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.616745] hub 1-0:1.0: USB hub found [ 0.616750] hub 1-0:1.0: 2 ports detected [ 0.616876] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.616879] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.616888] ehci-pci 0000:00:1d.0: debug port 2 [ 0.620770] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.620781] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7216000 [ 0.632638] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.632656] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.632657] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.632658] usb usb2: Product: EHCI Host Controller [ 0.632659] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd [ 0.632660] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.632715] hub 2-0:1.0: USB hub found [ 0.632718] hub 2-0:1.0: 2 ports detected [ 0.632779] ehci-platform: EHCI generic platform driver [ 0.632783] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.632784] ohci-pci: OHCI PCI platform driver [ 0.632788] ohci-platform: OHCI generic platform driver [ 0.632792] uhci_hcd: USB Universal Host Controller Interface driver [ 0.632865] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.632867] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.632941] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.632958] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 0.633002] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.633003] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.633004] usb usb3: Product: xHCI Host Controller [ 0.633005] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd [ 0.633006] usb usb3: SerialNumber: 0000:00:14.0 [ 0.633085] hub 3-0:1.0: USB hub found [ 0.633092] hub 3-0:1.0: 4 ports detected [ 0.633280] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.633283] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.633305] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.633306] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.633307] usb usb4: Product: xHCI Host Controller [ 0.633309] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd [ 0.633310] usb usb4: SerialNumber: 0000:00:14.0 [ 0.633384] hub 4-0:1.0: USB hub found [ 0.633390] hub 4-0:1.0: 4 ports detected [ 0.640680] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.641022] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.641025] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.641095] mousedev: PS/2 mouse device common for all mice [ 0.641213] rtc_cmos 00:05: RTC can wake from S4 [ 0.641334] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.641357] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.641394] device-mapper: uevent: version 1.0.3 [ 0.641455] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.641460] ledtrig-cpu: registered to indicate activity on CPUs [ 0.641522] TCP: cubic registered [ 0.641569] NET: Registered protocol family 10 [ 0.641673] NET: Registered protocol family 17 [ 0.641677] Key type dns_resolver registered [ 0.641948] Loading compiled-in X.509 certificates [ 0.642552] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9' [ 0.642558] registered taskstats version 1 [ 0.644416] Key type trusted registered [ 0.646123] Key type encrypted registered [ 0.647709] AppArmor: AppArmor sha1 policy hashing enabled [ 0.647711] IMA: No TPM chip found, activating TPM-bypass! [ 0.647898] regulator-dummy: disabling [ 0.647979] Magic number: 15:114:488 [ 0.648010] regulator regulator.0: hash matches [ 0.648073] rtc_cmos 00:05: setting system clock to 2015-09-21 15:28:00 UTC (1442849280) [ 0.648806] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.648807] EDD information not available. [ 0.648832] PM: Hibernation image not present or could not be loaded. [ 0.649473] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000) [ 0.649474] Write protecting the kernel read-only data: 12288k [ 0.650925] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000) [ 0.652133] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000) [ 0.660609] systemd-udevd[144]: starting version 204 [ 0.675071] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.675079] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.675305] r8169 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.675430] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018b8000, d4:3d:7e:98:ad:78, XID 0c900800 IRQ 43 [ 0.675432] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.676253] ahci 0000:00:1f.2: version 3.0 [ 0.676367] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 0.688607] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode [ 0.688610] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.704946] scsi0 : ahci [ 0.705068] scsi1 : ahci [ 0.705181] scsi2 : ahci [ 0.705282] scsi3 : ahci [ 0.705340] scsi4 : ahci [ 0.705388] scsi5 : ahci [ 0.705410] ata1: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215100 irq 44 [ 0.705412] ata2: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215180 irq 44 [ 0.705412] ata3: DUMMY [ 0.705414] ata4: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215280 irq 44 [ 0.705415] ata5: DUMMY [ 0.705415] ata6: DUMMY [ 0.928398] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.024295] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.024892] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.024896] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040853c370), AE_NOT_FOUND (20131115/psparse-536) [ 1.025108] ata4.00: ATA-8: ST500NM0011, SN02, max UDMA/133 [ 1.025112] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.025770] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.025774] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040853c370), AE_NOT_FOUND (20131115/psparse-536) [ 1.025969] ata4.00: configured for UDMA/133 [ 1.032281] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.032309] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.032672] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.032677] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88040853c280), AE_NOT_FOUND (20131115/psparse-536) [ 1.032705] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.032709] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88040853c208), AE_NOT_FOUND (20131115/psparse-536) [ 1.032717] ata2.00: supports DRM functions and may not be fully accessible [ 1.035640] ata2.00: disabling queued TRIM support [ 1.035645] ata2.00: ATA-9: Crucial_CT120M500SSD1, MU03, max UDMA/133 [ 1.035647] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.039229] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.039233] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88040853c280), AE_NOT_FOUND (20131115/psparse-536) [ 1.039264] ata2.00: supports DRM functions and may not be fully accessible [ 1.042228] ata2.00: disabling queued TRIM support [ 1.045523] ata2.00: configured for UDMA/133 [ 1.049129] ata1.00: ATA-8: WDC WD5000HHTZ-04N21V0, 04.06A00, max UDMA/133 [ 1.049132] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.049581] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 1.049585] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88040853c208), AE_NOT_FOUND (20131115/psparse-536) [ 1.049766] ata1.00: configured for UDMA/133 [ 1.049922] scsi 0:0:0:0: Direct-Access ATA WDC WD5000HHTZ-0 04.0 PQ: 0 ANSI: 5 [ 1.050026] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.050095] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.050097] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.050216] scsi 1:0:0:0: Direct-Access ATA Crucial_CT120M50 MU03 PQ: 0 ANSI: 5 [ 1.050301] sd 0:0:0:0: [sda] Write Protect is off [ 1.050305] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.050306] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.050307] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.050309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.050356] sd 1:0:0:0: [sdb] Write Protect is off [ 1.050359] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.050374] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.050376] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.050432] scsi 3:0:0:0: Direct-Access ATA ST500NM0011 SN02 PQ: 0 ANSI: 5 [ 1.050520] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.050527] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.050567] sd 3:0:0:0: [sdc] Write Protect is off [ 1.050569] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.050587] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.050831] sdb: sdb1 sdb2 [ 1.050960] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.054587] sda: sda1 [ 1.054750] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.060656] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.060669] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.060901] hub 1-1:1.0: USB hub found [ 1.061029] hub 1-1:1.0: 6 ports detected [ 1.095252] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 > [ 1.095701] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.172198] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.304380] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.304382] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.304522] hub 2-1:1.0: USB hub found [ 1.304623] hub 2-1:1.0: 8 ports detected [ 1.487987] usb 1-1.2: new high-speed USB device number 3 using ehci-pci [ 1.547777] tsc: Refined TSC clocksource calibration: 3300.054 MHz [ 1.581518] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.581532] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.581533] usb 1-1.2: Product: USB2.0 Hub [ 1.581927] hub 1-1.2:1.0: USB hub found [ 1.582265] hub 1-1.2:1.0: 4 ports detected [ 1.655822] usb 1-1.5: new low-speed USB device number 4 using ehci-pci [ 1.752975] usb 1-1.5: New USB device found, idVendor=04f3, idProduct=0213 [ 1.752980] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.752991] usb 1-1.5: Product: PS/2+USB Mouse [ 1.755416] hidraw: raw HID events driver (C) Jiri Kosina [ 1.759367] usbcore: registered new interface driver usbhid [ 1.759368] usbhid: USB HID core driver [ 1.760376] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input5 [ 1.760448] hid-generic 0003:04F3:0213.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1a.0-1.5/input0 [ 1.823659] usb 1-1.6: new low-speed USB device number 5 using ehci-pci [ 1.921687] usb 1-1.6: New USB device found, idVendor=413c, idProduct=2003 [ 1.921691] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.921703] usb 1-1.6: Product: Dell USB Keyboard [ 1.921704] usb 1-1.6: Manufacturer: Dell [ 1.925329] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input6 [ 1.925482] hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.6/input0 [ 2.163411] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.180058] usb 4-1: New USB device found, idVendor=1a5a, idProduct=0006 [ 2.180062] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.180065] usb 4-1: Product: RDX [ 2.180067] usb 4-1: Manufacturer: TANDBERG [ 2.180069] usb 4-1: SerialNumber: 006980481294 [ 2.182728] usb-storage 4-1:1.0: USB Mass Storage device detected [ 2.182916] scsi6 : usb-storage 4-1:1.0 [ 2.183245] usbcore: registered new interface driver usb-storage [ 2.251367] usb 1-1.2.2: new high-speed USB device number 6 using ehci-pci [ 2.343863] usb 1-1.2.2: New USB device found, idVendor=03f0, idProduct=132a [ 2.343867] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.343870] usb 1-1.2.2: Product: HP LaserJet 200 color M251nw [ 2.343872] usb 1-1.2.2: Manufacturer: Hewlett-Packard [ 2.343874] usb 1-1.2.2: SerialNumber: CND1G25135 [ 2.415169] usb 1-1.2.3: new high-speed USB device number 7 using ehci-pci [ 2.513944] usb 1-1.2.3: New USB device found, idVendor=058f, idProduct=6387 [ 2.513946] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.513948] usb 1-1.2.3: Product: Mass Storage [ 2.513949] usb 1-1.2.3: Manufacturer: Generic [ 2.513950] usb 1-1.2.3: SerialNumber: F2026D29 [ 2.514212] usb-storage 1-1.2.3:1.0: USB Mass Storage device detected [ 2.514342] scsi7 : usb-storage 1-1.2.3:1.0 [ 2.558783] raid6: sse2x1 8231 MB/s [ 2.626714] raid6: sse2x2 8424 MB/s [ 2.694644] raid6: sse2x4 9379 MB/s [ 2.694645] raid6: using algorithm sse2x4 (9379 MB/s) [ 2.694646] raid6: using ssse3x2 recovery algorithm [ 2.694653] Switched to clocksource tsc [ 2.694893] usb 1-1.2.4: new high-speed USB device number 8 using ehci-pci [ 2.695457] xor: automatically using best checksumming function: [ 2.734590] avx : 25158.000 MB/sec [ 2.742248] bio: create slab at 1 [ 2.742414] Btrfs loaded [ 2.759285] random: nonblocking pool is initialized [ 2.805287] usb 1-1.2.4: New USB device found, idVendor=04c5, idProduct=11a2 [ 2.805291] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.805294] usb 1-1.2.4: Product: ScanSnap S1500 [ 2.805296] usb 1-1.2.4: Manufacturer: Fujitsu [ 2.851904] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 3.178490] scsi 6:0:0:0: Direct-Access TANDBERG RDX 0205 PQ: 0 ANSI: 3 [ 3.178661] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 3.178891] sd 6:0:0:0: [sdd] 1953516976 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.179149] sd 6:0:0:0: [sdd] Write Protect is off [ 3.179152] sd 6:0:0:0: [sdd] Mode Sense: 0f 00 00 08 [ 3.179426] sd 6:0:0:0: [sdd] No Caching mode page found [ 3.179428] sd 6:0:0:0: [sdd] Assuming drive cache: write through [ 3.180429] sd 6:0:0:0: [sdd] No Caching mode page found [ 3.180431] sd 6:0:0:0: [sdd] Assuming drive cache: write through [ 3.181070] sdd: sdd1 [ 3.182061] sd 6:0:0:0: [sdd] No Caching mode page found [ 3.182063] sd 6:0:0:0: [sdd] Assuming drive cache: write through [ 3.182064] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 3.511799] scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 3.511957] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 3.513250] sd 7:0:0:0: [sde] 3893248 512-byte logical blocks: (1.99 GB/1.85 GiB) [ 3.514372] sd 7:0:0:0: [sde] Write Protect is off [ 3.514378] sd 7:0:0:0: [sde] Mode Sense: 23 00 00 00 [ 3.515484] sd 7:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.527007] sde: [ 3.530249] sd 7:0:0:0: [sde] Attached SCSI removable disk [ 3.691996] Adding 29329404k swap on /dev/sdb2. Priority:-1 extents:1 across:29329404k SSFS [ 3.694294] Adding 32767996k swap on /dev/sdc1. Priority:-2 extents:1 across:32767996k FS [ 3.710182] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.727024] systemd-udevd[500]: starting version 204 [ 3.727969] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 3.744020] lp: driver loaded but no devices found [ 3.751865] wmi: Mapper loaded [ 3.752024] ppdev: user-space parallel port driver [ 3.754301] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] [ 3.754854] parport0: irq 7 detected [ 3.763373] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.771348] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X [ 3.773986] [drm] Initialized drm 1.1.0 20060810 [ 3.777044] nvidia: module license 'NVIDIA' taints kernel. [ 3.777047] Disabling lock debugging due to kernel taint [ 3.780129] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 3.780969] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 3.780976] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.780980] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 3.780984] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.780986] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 3.780990] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.780991] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.786902] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 3.787173] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 3.787178] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08 PST 2015 [ 3.800686] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.811631] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 3.824534] SKU: Nid=0x1d sku_cfg=0x4007f603 [ 3.824537] SKU: port_connectivity=0x1 [ 3.824538] SKU: enable_pcbeep=0x0 [ 3.824539] SKU: check_sum=0x00000007 [ 3.824540] SKU: customization=0x000000f6 [ 3.824541] SKU: external_amp=0x0 [ 3.824542] SKU: platform_type=0x0 [ 3.824543] SKU: swap=0x1 [ 3.824544] SKU: override=0x1 [ 3.824949] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 3.824951] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.824952] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.824953] mono: mono_out=0x0 [ 3.824954] dig-out=0x1e/0x0 [ 3.824955] inputs: [ 3.824957] Front Mic=0x19 [ 3.824959] Rear Mic=0x18 [ 3.824960] Line=0x1a [ 3.824961] realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d [ 3.824963] realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0892 [ 3.838666] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 3.842502] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 3.842565] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 3.842618] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 3.842668] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 3.843515] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 3.843646] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 3.843761] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 3.847426] hda_intel: Disabling MSI [ 3.847432] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 3.847465] hda-intel 0000:01:00.1: Disabling 64bit DMA [ 3.850020] device-mapper: multipath: version 1.6.0 loaded [ 3.850196] lp0: using parport0 (polling). [ 3.852187] hda-intel 0000:01:00.1: Enable delay in RIRB handling [ 3.858026] WARNING! power/level is deprecated; use power/control instead [ 3.929157] Bluetooth: Core ver 2.17 [ 3.929173] NET: Registered protocol family 31 [ 3.929174] Bluetooth: HCI device and connection manager initialized [ 3.929180] Bluetooth: HCI socket layer initialized [ 3.929182] Bluetooth: L2CAP socket layer initialized [ 3.929185] Bluetooth: SCO socket layer initialized [ 3.932854] Bluetooth: RFCOMM TTY layer initialized [ 3.932863] Bluetooth: RFCOMM socket layer initialized [ 3.932867] Bluetooth: RFCOMM ver 1.11 [ 3.935772] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.935776] Bluetooth: BNEP filters: protocol multicast [ 3.935782] Bluetooth: BNEP socket layer initialized [ 3.967033] init: cups main process (978) killed by HUP signal [ 3.967041] init: cups main process ended, respawning [ 4.005378] intel_rapl: domain uncore energy ctr 0:0 not working, skip [ 4.020708] init: failsafe main process (1011) killed by TERM signal [ 4.049198] init: samba-ad-dc main process (1089) terminated with status 1 [ 4.203233] r8169 0000:03:00.0 eth0: link down [ 4.203262] r8169 0000:03:00.0 eth0: link down [ 4.203273] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.203420] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.281190] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 4.281274] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 4.281318] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 4.582059] init: plymouth-upstart-bridge main process ended, respawning [ 4.584777] init: plymouth-upstart-bridge main process (1754) terminated with status 1 [ 4.584784] init: plymouth-upstart-bridge main process ended, respawning [ 4.647050] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X [ 4.687231] vboxdrv: Found 8 processor cores. [ 4.687425] vboxdrv: fAsync=0 offMin=0x252 offMax=0x271a [ 4.687495] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 4.687497] vboxdrv: Successfully loaded version 4.3.18_Ubuntu (interface 0x001a0008). [ 4.698119] vboxpci: IOMMU not found (not registered) [ 4.780780] init: plymouth-stop pre-start process (1996) terminated with status 1 [ 4.816457] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.825926] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.885626] usblp 1-1.2.2:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x132A [ 4.885654] usbcore: registered new interface driver usblp [ 8.154667] r8169 0000:03:00.0 eth0: link up [ 8.154677] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 124.338936] init: udevtrigger post-stop process (538) terminated with status 1 [ 702.624359] cgroup: systemd-logind (977) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 702.624362] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 704.051304] FAT-fs (sde): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 706.220726] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 846.314780] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 846.331284] usb 3-2: New USB device found, idVendor=18a5, idProduct=0304 [ 846.331289] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 846.331291] usb 3-2: Product: STORE N GO [ 846.331294] usb 3-2: Manufacturer: Verbatim [ 846.331296] usb 3-2: SerialNumber: 1208000000006836 [ 846.331598] usb-storage 3-2:1.0: USB Mass Storage device detected [ 846.331716] scsi8 : usb-storage 3-2:1.0 [ 847.329896] scsi 8:0:0:0: Direct-Access Verbatim STORE N GO 1.00 PQ: 0 ANSI: 2 [ 847.330268] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 847.330438] sd 8:0:0:0: [sdf] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 847.330722] sd 8:0:0:0: [sdf] Write Protect is off [ 847.330728] sd 8:0:0:0: [sdf] Mode Sense: 03 00 00 00 [ 847.330981] sd 8:0:0:0: [sdf] No Caching mode page found [ 847.330983] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 847.332879] sd 8:0:0:0: [sdf] No Caching mode page found [ 847.332883] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 847.334163] sdf: sdf1 [ 847.335682] sd 8:0:0:0: [sdf] No Caching mode page found [ 847.335695] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 847.335697] sd 8:0:0:0: [sdf] Attached SCSI removable disk [ 847.536661] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 847.540015] ISO 9660 Extensions: RRIP_1991A [ 870.648583] usb 3-2: USB disconnect, device number 3 [ 896.601760] cinnamon[3061]: segfault at 48 ip 00007ffb369ff5c0 sp 00007fffd3a13958 error 4 in libcogl.so.15.3.1[7ffb369a8000+a0000] [ 931.627850] usb 3-2: new high-speed USB device number 4 using xhci_hcd [ 931.644340] usb 3-2: New USB device found, idVendor=18a5, idProduct=0304 [ 931.644344] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 931.644347] usb 3-2: Product: STORE N GO [ 931.644349] usb 3-2: Manufacturer: Verbatim [ 931.644351] usb 3-2: SerialNumber: 1208000000006749 [ 931.644629] usb-storage 3-2:1.0: USB Mass Storage device detected [ 931.644710] scsi9 : usb-storage 3-2:1.0 [ 932.642974] scsi 9:0:0:0: Direct-Access Verbatim STORE N GO 1.00 PQ: 0 ANSI: 2 [ 932.643363] sd 9:0:0:0: Attached scsi generic sg5 type 0 [ 932.643498] sd 9:0:0:0: [sdf] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 932.643761] sd 9:0:0:0: [sdf] Write Protect is off [ 932.643766] sd 9:0:0:0: [sdf] Mode Sense: 03 00 00 00 [ 932.644017] sd 9:0:0:0: [sdf] No Caching mode page found [ 932.644020] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 932.645370] sd 9:0:0:0: [sdf] No Caching mode page found [ 932.645376] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 932.653703] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 932.653705] GPT:3014591 != 7831551 [ 932.653706] GPT:Alternate GPT header not at the end of the disk. [ 932.653706] GPT:3014591 != 7831551 [ 932.653707] GPT: Use GNU Parted to correct GPT errors. [ 932.653717] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9 sdf10 sdf11 sdf12 [ 932.654868] sd 9:0:0:0: [sdf] No Caching mode page found [ 932.654870] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 932.654871] sd 9:0:0:0: [sdf] Attached SCSI removable disk [ 933.352916] EXT4-fs (sdf1): mounting ext2 file system using the ext4 subsystem [ 933.367927] EXT4-fs (sdf1): warning: mounting unchecked fs, running e2fsck is recommended [ 933.372169] EXT4-fs (sdf1): mounted filesystem without journal. Opts: (null) [ 933.863744] EXT4-fs (sdf8): recovery complete [ 933.866174] EXT4-fs (sdf8): mounted filesystem with ordered data mode. Opts: (null) [ 933.880436] EXT4-fs (sdf3): couldn't mount RDWR because of unsupported optional features (ff000000) [ 1138.050033] sd 9:0:0:0: [sdf] No Caching mode page found [ 1138.050036] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 1138.219764] sdf: sdf1 [ 2822.415243] usb 3-2: USB disconnect, device number 4 [ 8186.124316] usblp0: removed [ 8189.123423] usblp 1-1.2.2:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x132A [ 8208.290466] usblp0: removed [ 8218.034824] usblp 1-1.2.2:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x132A [ 8226.702534] usblp0: removed [ 8228.952510] usblp 1-1.2.2:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x132A [ 8247.075803] usblp0: removed [ 8263.066883] usblp 1-1.2.2:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x132A