#ifndef __SAA7110_H
#define __SAA7110_H

#include "hrt_def.h"

const unsigned char saa7110_default_init_regs[] = {
	94,                     /* there are 94 bytes that follow */
	0x00, 0x4c,             /* increment delay (IDEL) */
	0x01, 0x3c,             /* HSY begin 50 Hz */
	0x02, 0x0d,             /* HSY stop 50 Hz */
	0x03, 0xef,             /* HCL begin 50 Hz */
	0x04, 0xbd,             /* HCL stop 50 Hz */
	0x05, 0xf0,             /* HSY after PHI1 50 Hz */
	0x06, 0x00,             /* luminance control */
	0x07, 0x00,             /* hue control */
	0x08, 0xf8,             /* colour killer threshold QUAM (PAL/NTSC) */
	0x09, 0xf8,             /* colour killer threshold SECAM */
	0x0A, 0x60,             /* PAL switch sensitivity */
	0x0B, 0x50,             /* SECAM switch sensitivity */
	0x0C, 0x00,             /* gain control chrominance */
	0x0D, 0x86,             /* standard/mode control */
	/* 7 VTRC = 1  (VCR mode, not TV)
	   6 XXX
	   5 XXX
	   4 XXX
	   3 RTSE = 0  (PLIN switched to output)
	   2 HRMV = 1  (HREF normal position)
	   1 SSTB = 1  (status byte = 1)
	   0 SECS = 0  (other standards, not SECAM) */
	0x0E, 0x18,             /* I/O and clock control */
	0x0F, 0x90,             /* control #1 */
	0x10, 0x00,             /* control #2 */
	0x11, 0x2c,             /* chrominance gain reference */
	0x12, 0x7f,             /* chrominance saturation */
	0x13, 0x5e,             /* luminance contrast */
	0x14, 0x42,             /* HSY begin 60 Hz */
	0x15, 0x1a,             /* HSY stop 60 Hz */
	0x16, 0xff,             /* HCL begin 60 Hz */
	0x17, 0xda,             /* HCL stop 60 Hz */
	0x18, 0xf0,             /* HSY after PHI1 60 Hz */
	0x19, 0x9b,             /* luminance brightness */
	/*
	   0x1A - not used
	   0x1B - not used
	   0x1C - not used
	   0x1D - not used
	   0x1E - not used
	   0x1F - not used
	 */
	0x20, 0x7c,             /* analog control #1 */
	0x21, 0x03,             /* analog control #2 */
	0x22, 0xd2,             /* mixer control #1 */
	0x23, 0x41,             /* clamping level control 21 */
	0x24, 0x80,             /* clamping level control 22 */
	0x25, 0x41,             /* clamping level control 31 */
	0x26, 0x80,             /* clamping level control 32 */
	0x27, 0x4f,             /* gain control #1 */
	0x28, 0xfe,             /* white peak control */
	0x29, 0x01,             /* sync bottom control */
	0x2A, 0xcf,             /* gain control analog #2 */
	0x2B, 0x0f,             /* gain control analog #3 */
	0x2C, 0x83,             /* mixer control #2 */
	0x2D, 0x01,             /* integration value gain */
	0x2E, 0x81,             /* vertical blanking pulse set */
	0x2F, 0x03,             /* vertical blanking pulse reset */
	0x30, 0x60,             /* ADCs gain control */
	0x31, 0x71,             /* mixer control #3 */
	0x32, 0x02,             /* integration value white peak */
	0x33, 0x8c,             /* mixer control #4 */
	0x34, 0x03,             /* gain update level */
};


#endif