Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $
  3  *
  4  * Portions of MTD ABI definition which are shared by kernel and user space
  5  */
  6 
  7 #ifndef __MTD_ABI_H__
  8 #define __MTD_ABI_H__
  9 
 10 struct erase_info_user {
 11         uint32_t start;
 12         uint32_t length;
 13 };
 14 
 15 struct mtd_oob_buf {
 16         uint32_t start;
 17         uint32_t length;
 18         unsigned char __user *ptr;
 19 };
 20 
 21 #define MTD_ABSENT              0
 22 #define MTD_RAM                 1
 23 #define MTD_ROM                 2
 24 #define MTD_NORFLASH            3
 25 #define MTD_NANDFLASH           4
 26 #define MTD_DATAFLASH           6
 27 #define MTD_UBIVOLUME           7
 28 
 29 #define MTD_WRITEABLE           0x400   /* Device is writeable */
 30 #define MTD_BIT_WRITEABLE       0x800   /* Single bits can be flipped */
 31 #define MTD_NO_ERASE            0x1000  /* No erase necessary */
 32 #define MTD_POWERUP_LOCK        0x2000  /* Always locked after reset */
 33 
 34 // Some common devices / combinations of capabilities
 35 #define MTD_CAP_ROM             0
 36 #define MTD_CAP_RAM             (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
 37 #define MTD_CAP_NORFLASH        (MTD_WRITEABLE | MTD_BIT_WRITEABLE)
 38 #define MTD_CAP_NANDFLASH       (MTD_WRITEABLE)
 39 
 40 /* ECC byte placement */
 41 #define MTD_NANDECC_OFF         0       // Switch off ECC (Not recommended)
 42 #define MTD_NANDECC_PLACE       1       // Use the given placement in the structure (YAFFS1 legacy mode)
 43 #define MTD_NANDECC_AUTOPLACE   2       // Use the default placement scheme
 44 #define MTD_NANDECC_PLACEONLY   3       // Use the given placement in the structure (Do not store ecc result on read)
 45 #define MTD_NANDECC_AUTOPL_USR  4       // Use the given autoplacement scheme rather than using the default
 46 
 47 /* OTP mode selection */
 48 #define MTD_OTP_OFF             0
 49 #define MTD_OTP_FACTORY         1
 50 #define MTD_OTP_USER            2
 51 
 52 struct mtd_info_user {
 53         uint8_t type;
 54         uint32_t flags;
 55         uint32_t size;   // Total size of the MTD
 56         uint32_t erasesize;
 57         uint32_t writesize;
 58         uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
 59         /* The below two fields are obsolete and broken, do not use them
 60          * (TODO: remove at some point) */
 61         uint32_t ecctype;
 62         uint32_t eccsize;
 63 };
 64 
 65 struct region_info_user {
 66         uint32_t offset;                /* At which this region starts,
 67                                          * from the beginning of the MTD */
 68         uint32_t erasesize;             /* For this region */
 69         uint32_t numblocks;             /* Number of blocks in this region */
 70         uint32_t regionindex;
 71 };
 72 
 73 struct otp_info {
 74         uint32_t start;
 75         uint32_t length;
 76         uint32_t locked;
 77 };
 78 
 79 #define MEMGETINFO              _IOR('M', 1, struct mtd_info_user)
 80 #define MEMERASE                _IOW('M', 2, struct erase_info_user)
 81 #define MEMWRITEOOB             _IOWR('M', 3, struct mtd_oob_buf)
 82 #define MEMREADOOB              _IOWR('M', 4, struct mtd_oob_buf)
 83 #define MEMLOCK                 _IOW('M', 5, struct erase_info_user)
 84 #define MEMUNLOCK               _IOW('M', 6, struct erase_info_user)
 85 #define MEMGETREGIONCOUNT       _IOR('M', 7, int)
 86 #define MEMGETREGIONINFO        _IOWR('M', 8, struct region_info_user)
 87 #define MEMSETOOBSEL            _IOW('M', 9, struct nand_oobinfo)
 88 #define MEMGETOOBSEL            _IOR('M', 10, struct nand_oobinfo)
 89 #define MEMGETBADBLOCK          _IOW('M', 11, loff_t)
 90 #define MEMSETBADBLOCK          _IOW('M', 12, loff_t)
 91 #define OTPSELECT               _IOR('M', 13, int)
 92 #define OTPGETREGIONCOUNT       _IOW('M', 14, int)
 93 #define OTPGETREGIONINFO        _IOW('M', 15, struct otp_info)
 94 #define OTPLOCK                 _IOR('M', 16, struct otp_info)
 95 #define ECCGETLAYOUT            _IOR('M', 17, struct nand_ecclayout)
 96 #define ECCGETSTATS             _IOR('M', 18, struct mtd_ecc_stats)
 97 #define MTDFILEMODE             _IO('M', 19)
 98 
 99 /*
100  * Obsolete legacy interface. Keep it in order not to break userspace
101  * interfaces
102  */
103 struct nand_oobinfo {
104         uint32_t useecc;
105         uint32_t eccbytes;
106         uint32_t oobfree[8][2];
107         uint32_t eccpos[32];
108 };
109 
110 struct nand_oobfree {
111         uint32_t offset;
112         uint32_t length;
113 };
114 
115 #define MTD_MAX_OOBFREE_ENTRIES 8
116 /*
117  * ECC layout control structure. Exported to userspace for
118  * diagnosis and to allow creation of raw images
119  */
120 struct nand_ecclayout {
121         uint32_t eccbytes;
122         uint32_t eccpos[64];
123         uint32_t oobavail;
124         struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
125 };
126 
127 /**
128  * struct mtd_ecc_stats - error correction stats
129  *
130  * @corrected:  number of corrected bits
131  * @failed:     number of uncorrectable errors
132  * @badblocks:  number of bad blocks in this partition
133  * @bbtblocks:  number of blocks reserved for bad block tables
134  */
135 struct mtd_ecc_stats {
136         uint32_t corrected;
137         uint32_t failed;
138         uint32_t badblocks;
139         uint32_t bbtblocks;
140 };
141 
142 /*
143  * Read/write file modes for access to MTD
144  */
145 enum mtd_file_modes {
146         MTD_MODE_NORMAL = MTD_OTP_OFF,
147         MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
148         MTD_MODE_OTP_USER = MTD_OTP_USER,
149         MTD_MODE_RAW,
150 };
151 
152 #endif /* __MTD_ABI_H__ */
153 
  This page was automatically generated by the LXR engine.