Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 #ifndef __LINUX_PARPORT_PC_H
  2 #define __LINUX_PARPORT_PC_H
  3 
  4 #include <asm/io.h>
  5 
  6 /* --- register definitions ------------------------------- */
  7 
  8 #define ECONTROL(p) ((p)->base_hi + 0x2)
  9 #define CONFIGB(p)  ((p)->base_hi + 0x1)
 10 #define CONFIGA(p)  ((p)->base_hi + 0x0)
 11 #define FIFO(p)     ((p)->base_hi + 0x0)
 12 #define EPPDATA(p)  ((p)->base    + 0x4)
 13 #define EPPADDR(p)  ((p)->base    + 0x3)
 14 #define CONTROL(p)  ((p)->base    + 0x2)
 15 #define STATUS(p)   ((p)->base    + 0x1)
 16 #define DATA(p)     ((p)->base    + 0x0)
 17 
 18 struct parport_pc_private {
 19         /* Contents of CTR. */
 20         unsigned char ctr;
 21 
 22         /* Bitmask of writable CTR bits. */
 23         unsigned char ctr_writable;
 24 
 25         /* Whether or not there's an ECR. */
 26         int ecr;
 27 
 28         /* Number of PWords that FIFO will hold. */
 29         int fifo_depth;
 30 
 31         /* Number of bytes per portword. */
 32         int pword;
 33 
 34         /* Not used yet. */
 35         int readIntrThreshold;
 36         int writeIntrThreshold;
 37 
 38         /* buffer suitable for DMA, if DMA enabled */
 39         char *dma_buf;
 40         dma_addr_t dma_handle;
 41         struct list_head list;
 42         struct parport *port;
 43 };
 44 
 45 struct parport_pc_via_data
 46 {
 47         /* ISA PnP IRQ routing register 1 */
 48         u8 via_pci_parport_irq_reg;
 49         /* ISA PnP DMA request routing register */
 50         u8 via_pci_parport_dma_reg;
 51         /* Register and value to enable SuperIO configuration access */
 52         u8 via_pci_superio_config_reg;
 53         u8 via_pci_superio_config_data;
 54         /* SuperIO function register number */
 55         u8 viacfg_function;
 56         /* parallel port control register number */
 57         u8 viacfg_parport_control;
 58         /* Parallel port base address register */
 59         u8 viacfg_parport_base;
 60 };
 61 
 62 static __inline__ void parport_pc_write_data(struct parport *p, unsigned char d)
 63 {
 64 #ifdef DEBUG_PARPORT
 65         printk (KERN_DEBUG "parport_pc_write_data(%p,0x%02x)\n", p, d);
 66 #endif
 67         outb(d, DATA(p));
 68 }
 69 
 70 static __inline__ unsigned char parport_pc_read_data(struct parport *p)
 71 {
 72         unsigned char val = inb (DATA (p));
 73 #ifdef DEBUG_PARPORT
 74         printk (KERN_DEBUG "parport_pc_read_data(%p) = 0x%02x\n",
 75                 p, val);
 76 #endif
 77         return val;
 78 }
 79 
 80 #ifdef DEBUG_PARPORT
 81 static inline void dump_parport_state (char *str, struct parport *p)
 82 {
 83         /* here's hoping that reading these ports won't side-effect anything underneath */
 84         unsigned char ecr = inb (ECONTROL (p));
 85         unsigned char dcr = inb (CONTROL (p));
 86         unsigned char dsr = inb (STATUS (p));
 87         static const char *const ecr_modes[] = {"SPP", "PS2", "PPFIFO", "ECP", "xXx", "yYy", "TST", "CFG"};
 88         const struct parport_pc_private *priv = p->physport->private_data;
 89         int i;
 90 
 91         printk (KERN_DEBUG "*** parport state (%s): ecr=[%s", str, ecr_modes[(ecr & 0xe0) >> 5]);
 92         if (ecr & 0x10) printk (",nErrIntrEn");
 93         if (ecr & 0x08) printk (",dmaEn");
 94         if (ecr & 0x04) printk (",serviceIntr");
 95         if (ecr & 0x02) printk (",f_full");
 96         if (ecr & 0x01) printk (",f_empty");
 97         for (i=0; i<2; i++) {
 98                 printk ("]  dcr(%s)=[", i ? "soft" : "hard");
 99                 dcr = i ? priv->ctr : inb (CONTROL (p));
100         
101                 if (dcr & 0x20) {
102                         printk ("rev");
103                 } else {
104                         printk ("fwd");
105                 }
106                 if (dcr & 0x10) printk (",ackIntEn");
107                 if (!(dcr & 0x08)) printk (",N-SELECT-IN");
108                 if (dcr & 0x04) printk (",N-INIT");
109                 if (!(dcr & 0x02)) printk (",N-AUTOFD");
110                 if (!(dcr & 0x01)) printk (",N-STROBE");
111         }
112         printk ("]  dsr=[");
113         if (!(dsr & 0x80)) printk ("BUSY");
114         if (dsr & 0x40) printk (",N-ACK");
115         if (dsr & 0x20) printk (",PERROR");
116         if (dsr & 0x10) printk (",SELECT");
117         if (dsr & 0x08) printk (",N-FAULT");
118         printk ("]\n");
119         return;
120 }
121 #else   /* !DEBUG_PARPORT */
122 #define dump_parport_state(args...)
123 #endif  /* !DEBUG_PARPORT */
124 
125 /* __parport_pc_frob_control differs from parport_pc_frob_control in that
126  * it doesn't do any extra masking. */
127 static __inline__ unsigned char __parport_pc_frob_control (struct parport *p,
128                                                            unsigned char mask,
129                                                            unsigned char val)
130 {
131         struct parport_pc_private *priv = p->physport->private_data;
132         unsigned char ctr = priv->ctr;
133 #ifdef DEBUG_PARPORT
134         printk (KERN_DEBUG
135                 "__parport_pc_frob_control(%02x,%02x): %02x -> %02x\n",
136                 mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
137 #endif
138         ctr = (ctr & ~mask) ^ val;
139         ctr &= priv->ctr_writable; /* only write writable bits. */
140         outb (ctr, CONTROL (p));
141         priv->ctr = ctr;        /* Update soft copy */
142         return ctr;
143 }
144 
145 static __inline__ void parport_pc_data_reverse (struct parport *p)
146 {
147         __parport_pc_frob_control (p, 0x20, 0x20);
148 }
149 
150 static __inline__ void parport_pc_data_forward (struct parport *p)
151 {
152         __parport_pc_frob_control (p, 0x20, 0x00);
153 }
154 
155 static __inline__ void parport_pc_write_control (struct parport *p,
156                                                  unsigned char d)
157 {
158         const unsigned char wm = (PARPORT_CONTROL_STROBE |
159                                   PARPORT_CONTROL_AUTOFD |
160                                   PARPORT_CONTROL_INIT |
161                                   PARPORT_CONTROL_SELECT);
162 
163         /* Take this out when drivers have adapted to newer interface. */
164         if (d & 0x20) {
165                 printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
166                         p->name, p->cad->name);
167                 parport_pc_data_reverse (p);
168         }
169 
170         __parport_pc_frob_control (p, wm, d & wm);
171 }
172 
173 static __inline__ unsigned char parport_pc_read_control(struct parport *p)
174 {
175         const unsigned char rm = (PARPORT_CONTROL_STROBE |
176                                   PARPORT_CONTROL_AUTOFD |
177                                   PARPORT_CONTROL_INIT |
178                                   PARPORT_CONTROL_SELECT);
179         const struct parport_pc_private *priv = p->physport->private_data;
180         return priv->ctr & rm; /* Use soft copy */
181 }
182 
183 static __inline__ unsigned char parport_pc_frob_control (struct parport *p,
184                                                          unsigned char mask,
185                                                          unsigned char val)
186 {
187         const unsigned char wm = (PARPORT_CONTROL_STROBE |
188                                   PARPORT_CONTROL_AUTOFD |
189                                   PARPORT_CONTROL_INIT |
190                                   PARPORT_CONTROL_SELECT);
191 
192         /* Take this out when drivers have adapted to newer interface. */
193         if (mask & 0x20) {
194                 printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
195                         p->name, p->cad->name,
196                         (val & 0x20) ? "reverse" : "forward");
197                 if (val & 0x20)
198                         parport_pc_data_reverse (p);
199                 else
200                         parport_pc_data_forward (p);
201         }
202 
203         /* Restrict mask and val to control lines. */
204         mask &= wm;
205         val &= wm;
206 
207         return __parport_pc_frob_control (p, mask, val);
208 }
209 
210 static __inline__ unsigned char parport_pc_read_status(struct parport *p)
211 {
212         return inb(STATUS(p));
213 }
214 
215 
216 static __inline__ void parport_pc_disable_irq(struct parport *p)
217 {
218         __parport_pc_frob_control (p, 0x10, 0x00);
219 }
220 
221 static __inline__ void parport_pc_enable_irq(struct parport *p)
222 {
223         __parport_pc_frob_control (p, 0x10, 0x10);
224 }
225 
226 extern void parport_pc_release_resources(struct parport *p);
227 
228 extern int parport_pc_claim_resources(struct parport *p);
229 
230 /* PCMCIA code will want to get us to look at a port.  Provide a mechanism. */
231 extern struct parport *parport_pc_probe_port (unsigned long base,
232                                               unsigned long base_hi,
233                                               int irq, int dma,
234                                               struct device *dev);
235 extern void parport_pc_unregister_port (struct parport *p);
236 
237 #endif
238 
  This page was automatically generated by the LXR engine.