1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (c) 2005 Stanislaw Skowronek <skylark@linux-mips.org>
7 */
8
9 #ifndef _LINUX_IOC3_H
10 #define _LINUX_IOC3_H
11
12 #include <asm/sn/ioc3.h>
13
14 #define IOC3_MAX_SUBMODULES 32
15
16 #define IOC3_CLASS_NONE 0
17 #define IOC3_CLASS_BASE_IP27 1
18 #define IOC3_CLASS_BASE_IP30 2
19 #define IOC3_CLASS_MENET_123 3
20 #define IOC3_CLASS_MENET_4 4
21 #define IOC3_CLASS_CADDUO 5
22 #define IOC3_CLASS_SERIAL 6
23
24 /* One of these per IOC3 */
25 struct ioc3_driver_data {
26 struct list_head list;
27 int id; /* IOC3 sequence number */
28 /* PCI mapping */
29 unsigned long pma; /* physical address */
30 struct ioc3 __iomem *vma; /* pointer to registers */
31 struct pci_dev *pdev; /* PCI device */
32 /* IRQ stuff */
33 int dual_irq; /* set if separate IRQs are used */
34 int irq_io, irq_eth; /* IRQ numbers */
35 /* GPIO magic */
36 spinlock_t gpio_lock;
37 unsigned int gpdr_shadow;
38 /* NIC identifiers */
39 char nic_part[32];
40 char nic_serial[16];
41 char nic_mac[6];
42 /* submodule set */
43 int class;
44 void *data[IOC3_MAX_SUBMODULES]; /* for submodule use */
45 int active[IOC3_MAX_SUBMODULES]; /* set if probe succeeds */
46 /* is_ir_lock must be held while
47 * modifying sio_ie values, so
48 * we can be sure that sio_ie is
49 * not changing when we read it
50 * along with sio_ir.
51 */
52 spinlock_t ir_lock; /* SIO_IE[SC] mod lock */
53 };
54
55 /* One per submodule */
56 struct ioc3_submodule {
57 char *name; /* descriptive submodule name */
58 struct module *owner; /* owning kernel module */
59 int ethernet; /* set for ethernet drivers */
60 int (*probe) (struct ioc3_submodule *, struct ioc3_driver_data *);
61 int (*remove) (struct ioc3_submodule *, struct ioc3_driver_data *);
62 int id; /* assigned by IOC3, index for the "data" array */
63 /* IRQ stuff */
64 unsigned int irq_mask; /* IOC3 IRQ mask, leave clear for Ethernet */
65 int reset_mask; /* non-zero if you want the ioc3.c module to reset interrupts */
66 int (*intr) (struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
67 /* private submodule data */
68 void *data; /* assigned by submodule */
69 };
70
71 /**********************************
72 * Functions needed by submodules *
73 **********************************/
74
75 #define IOC3_W_IES 0
76 #define IOC3_W_IEC 1
77
78 /* registers a submodule for all existing and future IOC3 chips */
79 extern int ioc3_register_submodule(struct ioc3_submodule *);
80 /* unregisters a submodule */
81 extern void ioc3_unregister_submodule(struct ioc3_submodule *);
82 /* enables IRQs indicated by irq_mask for a specified IOC3 chip */
83 extern void ioc3_enable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
84 /* ackowledges specified IRQs */
85 extern void ioc3_ack(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
86 /* disables IRQs indicated by irq_mask for a specified IOC3 chip */
87 extern void ioc3_disable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
88 /* atomically sets GPCR bits */
89 extern void ioc3_gpcr_set(struct ioc3_driver_data *, unsigned int);
90 /* general ireg writer */
91 extern void ioc3_write_ireg(struct ioc3_driver_data *idd, uint32_t value, int reg);
92
93 #endif
94
|
This page was automatically generated by the
LXR engine.
|