1 /*
2 * linux/drivers/video/cyber2000fb.c
3 *
4 * Copyright (C) 1998-2002 Russell King
5 *
6 * MIPS and 50xx clock support
7 * Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
8 *
9 * 32 bit support, text color and panning fixes for modes != 8 bit
10 * Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
16 * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
17 *
18 * Based on cyberfb.c.
19 *
20 * Note that we now use the new fbcon fix, var and cmap scheme. We do
21 * still have to check which console is the currently displayed one
22 * however, especially for the colourmap stuff.
23 *
24 * We also use the new hotplug PCI subsystem. I'm not sure if there
25 * are any such cards, but I'm erring on the side of caution. We don't
26 * want to go pop just because someone does have one.
27 *
28 * Note that this doesn't work fully in the case of multiple CyberPro
29 * cards with grabbers. We currently can only attach to the first
30 * CyberPro card found.
31 *
32 * When we're in truecolour mode, we power down the LUT RAM as a power
33 * saving feature. Also, when we enter any of the powersaving modes
34 * (except soft blanking) we power down the RAMDACs. This saves about
35 * 1W, which is roughly 8% of the power consumption of a NetWinder
36 * (which, incidentally, is about the same saving as a 2.5in hard disk
37 * entering standby mode.)
38 */
39 #include <linux/config.h>
40 #include <linux/module.h>
41 #include <linux/kernel.h>
42 #include <linux/errno.h>
43 #include <linux/string.h>
44 #include <linux/mm.h>
45 #include <linux/tty.h>
46 #include <linux/slab.h>
47 #include <linux/delay.h>
48 #include <linux/fb.h>
49 #include <linux/pci.h>
50 #include <linux/init.h>
51
52 #include <asm/io.h>
53 #include <asm/irq.h>
54 #include <asm/pgtable.h>
55 #include <asm/system.h>
56 #include <asm/uaccess.h>
57
58 #ifdef __arm__
59 #include <asm/mach-types.h>
60 #endif
61
62 #include "cyber2000fb.h"
63
64 struct cfb_info {
65 struct fb_info fb;
66 struct display_switch *dispsw;
67 struct display *display;
68 struct pci_dev *dev;
69 unsigned char __iomem *region;
70 unsigned char __iomem *regs;
71 u_int id;
72 int func_use_count;
73 u_long ref_ps;
74
75 /*
76 * Clock divisors
77 */
78 u_int divisors[4];
79
80 struct {
81 u8 red, green, blue;
82 } palette[NR_PALETTE];
83
84 u_char mem_ctl1;
85 u_char mem_ctl2;
86 u_char mclk_mult;
87 u_char mclk_div;
88 /*
89 * RAMDAC control register is both of these or'ed together
90 */
91 u_char ramdac_ctrl;
92 u_char ramdac_powerdown;
93 };
94
95 static char default_font_storage[40];
96 static char *default_font = "Acorn8x8";
97 module_param(default_font, charp, 0);
98 MODULE_PARM_DESC(default_font, "Default font name");
99
100 /*
101 * Our access methods.
102 */
103 #define cyber2000fb_writel(val,reg,cfb) writel(val, (cfb)->regs + (reg))
104 #define cyber2000fb_writew(val,reg,cfb) writew(val, (cfb)->regs + (reg))
105 #define cyber2000fb_writeb(val,reg,cfb) writeb(val, (cfb)->regs + (reg))
106
107 #define cyber2000fb_readb(reg,cfb) readb((cfb)->regs + (reg))
108
109 static inline void
110 cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
111 {
112 cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
113 }
114
115 static inline void
116 cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
117 {
118 cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
119 }
120
121 static inline unsigned int
122 cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
123 {
124 cyber2000fb_writeb(reg, 0x3ce, cfb);
125 return cyber2000fb_readb(0x3cf, cfb);
126 }
127
128 static inline void
129 cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
130 {
131 cyber2000fb_readb(0x3da, cfb);
132 cyber2000fb_writeb(reg, 0x3c0, cfb);
133 cyber2000fb_readb(0x3c1, cfb);
134 cyber2000fb_writeb(val, 0x3c0, cfb);
135 }
136
137 static inline void
138 cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
139 {
140 cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
141 }
142
143 /* -------------------- Hardware specific routines ------------------------- */
144
145 /*
146 * Hardware Cyber2000 Acceleration
147 */
148 static void
149 cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
150 {
151 struct cfb_info *cfb = (struct cfb_info *)info;
152 unsigned long dst, col;
153
154 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
155 cfb_fillrect(info, rect);
156 return;
157 }
158
159 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
160 cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
161 cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
162
163 col = rect->color;
164 if (cfb->fb.var.bits_per_pixel > 8)
165 col = ((u32 *)cfb->fb.pseudo_palette)[col];
166 cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
167
168 dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
169 if (cfb->fb.var.bits_per_pixel == 24) {
170 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
171 dst *= 3;
172 }
173
174 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
175 cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
176 cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
177 cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
178 }
179
180 static void
181 cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
182 {
183 struct cfb_info *cfb = (struct cfb_info *)info;
184 unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
185 unsigned long src, dst;
186
187 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
188 cfb_copyarea(info, region);
189 return;
190 }
191
192 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
193 cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
194 cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
195
196 src = region->sx + region->sy * cfb->fb.var.xres_virtual;
197 dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
198
199 if (region->sx < region->dx) {
200 src += region->width - 1;
201 dst += region->width - 1;
202 cmd |= CO_CMD_L_INC_LEFT;
203 }
204
205 if (region->sy < region->dy) {
206 src += (region->height - 1) * cfb->fb.var.xres_virtual;
207 dst += (region->height - 1) * cfb->fb.var.xres_virtual;
208 cmd |= CO_CMD_L_INC_UP;
209 }
210
211 if (cfb->fb.var.bits_per_pixel == 24) {
212 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
213 src *= 3;
214 dst *= 3;
215 }
216 cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
217 cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
218 cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
219 cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
220 cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
221 CO_REG_CMD_H, cfb);
222 }
223
224 static void
225 cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
226 {
227 // struct cfb_info *cfb = (struct cfb_info *)info;
228
229 // if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
230 cfb_imageblit(info, image);
231 return;
232 // }
233 }
234
235 static int cyber2000fb_sync(struct fb_info *info)
236 {
237 struct cfb_info *cfb = (struct cfb_info *)info;
238 int count = 100000;
239
240 if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
241 return 0;
242
243 while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
244 if (!count--) {
245 debug_printf("accel_wait timed out\n");
246 cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
247 break;
248 }
249 udelay(1);
250 }
251 return 0;
252 }
253
254 /*
255 * ===========================================================================
256 */
257
258 static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
259 {
260 u_int mask = (1 << bf->length) - 1;
261
262 return (val >> (16 - bf->length) & mask) << bf->offset;
263 }
264
265 /*
266 * Set a single color register. Return != 0 for invalid regno.
267 */
268 static int
269 cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
270 u_int transp, struct fb_info *info)
271 {
272 struct cfb_info *cfb = (struct cfb_info *)info;
273 struct fb_var_screeninfo *var = &cfb->fb.var;
274 u32 pseudo_val;
275 int ret = 1;
276
277 switch (cfb->fb.fix.visual) {
278 default:
279 return 1;
280
281 /*
282 * Pseudocolour:
283 * 8 8
284 * pixel --/--+--/--> red lut --> red dac
285 * | 8
286 * +--/--> green lut --> green dac
287 * | 8
288 * +--/--> blue lut --> blue dac
289 */
290 case FB_VISUAL_PSEUDOCOLOR:
291 if (regno >= NR_PALETTE)
292 return 1;
293
294 red >>= 8;
295 green >>= 8;
296 blue >>= 8;
297
298 cfb->palette[regno].red = red;
299 cfb->palette[regno].green = green;
300 cfb->palette[regno].blue = blue;
301
302 cyber2000fb_writeb(regno, 0x3c8, cfb);
303 cyber2000fb_writeb(red, 0x3c9, cfb);
304 cyber2000fb_writeb(green, 0x3c9, cfb);
305 cyber2000fb_writeb(blue, 0x3c9, cfb);
306 return 0;
307
308 /*
309 * Direct colour:
310 * n rl
311 * pixel --/--+--/--> red lut --> red dac
312 * | gl
313 * +--/--> green lut --> green dac
314 * | bl
315 * +--/--> blue lut --> blue dac
316 * n = bpp, rl = red length, gl = green length, bl = blue length
317 */
318 case FB_VISUAL_DIRECTCOLOR:
319 red >>= 8;
320 green >>= 8;
321 blue >>= 8;
322
323 if (var->green.length == 6 && regno < 64) {
324 cfb->palette[regno << 2].green = green;
325
326 /*
327 * The 6 bits of the green component are applied
328 * to the high 6 bits of the LUT.
329 */
330 cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
331 cyber2000fb_writeb(cfb->palette[regno >> 1].red, 0x3c9, cfb);
332 cyber2000fb_writeb(green, 0x3c9, cfb);
333 cyber2000fb_writeb(cfb->palette[regno >> 1].blue, 0x3c9, cfb);
334
335 green = cfb->palette[regno << 3].green;
336
337 ret = 0;
338 }
339
340 if (var->green.length >= 5 && regno < 32) {
341 cfb->palette[regno << 3].red = red;
342 cfb->palette[regno << 3].green = green;
343 cfb->palette[regno << 3].blue = blue;
344
345 /*
346 * The 5 bits of each colour component are
347 * applied to the high 5 bits of the LUT.
348 */
349 cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
350 cyber2000fb_writeb(red, 0x3c9, cfb);
351 cyber2000fb_writeb(green, 0x3c9, cfb);
352 cyber2000fb_writeb(blue, 0x3c9, cfb);
353 ret = 0;
354 }
355
356 if (var->green.length == 4 && regno < 16) {
357 cfb->palette[regno << 4].red = red;
358 cfb->palette[regno << 4].green = green;
359 cfb->palette[regno << 4].blue = blue;
360
361 /*
362 * The 5 bits of each colour component are
363 * applied to the high 5 bits of the LUT.
364 */
365 cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
366 cyber2000fb_writeb(red, 0x3c9, cfb);
367 cyber2000fb_writeb(green, 0x3c9, cfb);
368 cyber2000fb_writeb(blue, 0x3c9, cfb);
369 ret = 0;
370 }
371
372 /*
373 * Since this is only used for the first 16 colours, we
374 * don't have to care about overflowing for regno >= 32
375 */
376 pseudo_val = regno << var->red.offset |
377 regno << var->green.offset |
378 regno << var->blue.offset;
379 break;
380
381 /*
382 * True colour:
383 * n rl
384 * pixel --/--+--/--> red dac
385 * | gl
386 * +--/--> green dac
387 * | bl
388 * +--/--> blue dac
389 * n = bpp, rl = red length, gl = green length, bl = blue length
390 */
391 case FB_VISUAL_TRUECOLOR:
392 pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
393 pseudo_val |= convert_bitfield(red, &var->red);
394 pseudo_val |= convert_bitfield(green, &var->green);
395 pseudo_val |= convert_bitfield(blue, &var->blue);
396 break;
397 }
398
399 /*
400 * Now set our pseudo palette for the CFB16/24/32 drivers.
401 */
402 if (regno < 16)
403 ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
404
405 return ret;
406 }
407
408 struct par_info {
409 /*
410 * Hardware
411 */
412 u_char clock_mult;
413 u_char clock_div;
414 u_char extseqmisc;
415 u_char co_pixfmt;
416 u_char crtc_ofl;
417 u_char crtc[19];
418 u_int width;
419 u_int pitch;
420 u_int fetch;
421
422 /*
423 * Other
424 */
425 u_char ramdac;
426 };
427
428 static const u_char crtc_idx[] = {
429 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
430 0x08, 0x09,
431 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
432 };
433
434 static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
435 {
436 unsigned int i;
437 unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
438
439 cyber2000fb_writeb(0x56, 0x3ce, cfb);
440 i = cyber2000fb_readb(0x3cf, cfb);
441 cyber2000fb_writeb(i | 4, 0x3cf, cfb);
442 cyber2000fb_writeb(val, 0x3c6, cfb);
443 cyber2000fb_writeb(i, 0x3cf, cfb);
444 }
445
446 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
447 {
448 u_int i;
449
450 /*
451 * Blank palette
452 */
453 for (i = 0; i < NR_PALETTE; i++) {
454 cyber2000fb_writeb(i, 0x3c8, cfb);
455 cyber2000fb_writeb(0, 0x3c9, cfb);
456 cyber2000fb_writeb(0, 0x3c9, cfb);
457 cyber2000fb_writeb(0, 0x3c9, cfb);
458 }
459
460 cyber2000fb_writeb(0xef, 0x3c2, cfb);
461 cyber2000_crtcw(0x11, 0x0b, cfb);
462 cyber2000_attrw(0x11, 0x00, cfb);
463
464 cyber2000_seqw(0x00, 0x01, cfb);
465 cyber2000_seqw(0x01, 0x01, cfb);
466 cyber2000_seqw(0x02, 0x0f, cfb);
467 cyber2000_seqw(0x03, 0x00, cfb);
468 cyber2000_seqw(0x04, 0x0e, cfb);
469 cyber2000_seqw(0x00, 0x03, cfb);
470
471 for (i = 0; i < sizeof(crtc_idx); i++)
472 cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
473
474 for (i = 0x0a; i < 0x10; i++)
475 cyber2000_crtcw(i, 0, cfb);
476
477 cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
478 cyber2000_grphw(0x00, 0x00, cfb);
479 cyber2000_grphw(0x01, 0x00, cfb);
480 cyber2000_grphw(0x02, 0x00, cfb);
481 cyber2000_grphw(0x03, 0x00, cfb);
482 cyber2000_grphw(0x04, 0x00, cfb);
483 cyber2000_grphw(0x05, 0x60, cfb);
484 cyber2000_grphw(0x06, 0x05, cfb);
485 cyber2000_grphw(0x07, 0x0f, cfb);
486 cyber2000_grphw(0x08, 0xff, cfb);
487
488 /* Attribute controller registers */
489 for (i = 0; i < 16; i++)
490 cyber2000_attrw(i, i, cfb);
491
492 cyber2000_attrw(0x10, 0x01, cfb);
493 cyber2000_attrw(0x11, 0x00, cfb);
494 cyber2000_attrw(0x12, 0x0f, cfb);
495 cyber2000_attrw(0x13, 0x00, cfb);
496 cyber2000_attrw(0x14, 0x00, cfb);
497
498 /* PLL registers */
499 cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
500 cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
501 cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
502 cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
503 cyber2000_grphw(0x90, 0x01, cfb);
504 cyber2000_grphw(0xb9, 0x80, cfb);
505 cyber2000_grphw(0xb9, 0x00, cfb);
506
507 cfb->ramdac_ctrl = hw->ramdac;
508 cyber2000fb_write_ramdac_ctrl(cfb);
509
510 cyber2000fb_writeb(0x20, 0x3c0, cfb);
511 cyber2000fb_writeb(0xff, 0x3c6, cfb);
512
513 cyber2000_grphw(0x14, hw->fetch, cfb);
514 cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
515 ((hw->pitch >> 4) & 0x30), cfb);
516 cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
517
518 /*
519 * Set up accelerator registers
520 */
521 cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
522 cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
523 cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
524 }
525
526 static inline int
527 cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
528 {
529 u_int base = var->yoffset * var->xres_virtual + var->xoffset;
530
531 base *= var->bits_per_pixel;
532
533 /*
534 * Convert to bytes and shift two extra bits because DAC
535 * can only start on 4 byte aligned data.
536 */
537 base >>= 5;
538
539 if (base >= 1 << 20)
540 return -EINVAL;
541
542 cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
543 cyber2000_crtcw(0x0c, base >> 8, cfb);
544 cyber2000_crtcw(0x0d, base, cfb);
545
546 return 0;
547 }
548
549 static int
550 cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
551 struct fb_var_screeninfo *var)
552 {
553 u_int Htotal, Hblankend, Hsyncend;
554 u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
555 #define BIT(v,b1,m,b2) (((v >> b1) & m) << b2)
556
557 hw->crtc[13] = hw->pitch;
558 hw->crtc[17] = 0xe3;
559 hw->crtc[14] = 0;
560 hw->crtc[8] = 0;
561
562 Htotal = var->xres + var->right_margin +
563 var->hsync_len + var->left_margin;
564
565 if (Htotal > 2080)
566 return -EINVAL;
567
568 hw->crtc[0] = (Htotal >> 3) - 5;
569 hw->crtc[1] = (var->xres >> 3) - 1;
570 hw->crtc[2] = var->xres >> 3;
571 hw->crtc[4] = (var->xres + var->right_margin) >> 3;
572
573 Hblankend = (Htotal - 4*8) >> 3;
574
575 hw->crtc[3] = BIT(Hblankend, 0, 0x1f, 0) |
576 BIT(1, 0, 0x01, 7);
577
578 Hsyncend = (var->xres + var->right_margin + var->hsync_len) >> 3;
579
580 hw->crtc[5] = BIT(Hsyncend, 0, 0x1f, 0) |
581 BIT(Hblankend, 5, 0x01, 7);
582
583 Vdispend = var->yres - 1;
584 Vsyncstart = var->yres + var->lower_margin;
585 Vsyncend = var->yres + var->lower_margin + var->vsync_len;
586 Vtotal = var->yres + var->lower_margin + var->vsync_len +
587 var->upper_margin - 2;
588
589 if (Vtotal > 2047)
590 return -EINVAL;
591
592 Vblankstart = var->yres + 6;
593 Vblankend = Vtotal - 10;
594
595 hw->crtc[6] = Vtotal;
596 hw->crtc[7] = BIT(Vtotal, 8, 0x01, 0) |
597 BIT(Vdispend, 8, 0x01, 1) |
598 BIT(Vsyncstart, 8, 0x01, 2) |
599 BIT(Vblankstart,8, 0x01, 3) |
600 BIT(1, 0, 0x01, 4) |
601 BIT(Vtotal, 9, 0x01, 5) |
602 BIT(Vdispend, 9, 0x01, 6) |
603 BIT(Vsyncstart, 9, 0x01, 7);
604 hw->crtc[9] = BIT(0, 0, 0x1f, 0) |
605 BIT(Vblankstart,9, 0x01, 5) |
606 BIT(1, 0, 0x01, 6);
607 hw->crtc[10] = Vsyncstart;
608 hw->crtc[11] = BIT(Vsyncend, 0, 0x0f, 0) |
609 BIT(1, 0, 0x01, 7);
610 hw->crtc[12] = Vdispend;
611 hw->crtc[15] = Vblankstart;
612 hw->crtc[16] = Vblankend;
613 hw->crtc[18] = 0xff;
614
615 /*
616 * overflow - graphics reg 0x11
617 * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
618 * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
619 */
620 hw->crtc_ofl =
621 BIT(Vtotal, 10, 0x01, 0) |
622 BIT(Vdispend, 10, 0x01, 1) |
623 BIT(Vsyncstart, 10, 0x01, 2) |
624 BIT(Vblankstart,10, 0x01, 3) |
625 EXT_CRT_VRTOFL_LINECOMP10;
626
627 /* woody: set the interlaced bit... */
628 /* FIXME: what about doublescan? */
629 if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
630 hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
631
632 return 0;
633 }
634
635 /*
636 * The following was discovered by a good monitor, bit twiddling, theorising
637 * and but mostly luck. Strangely, it looks like everyone elses' PLL!
638 *
639 * Clock registers:
640 * fclock = fpll / div2
641 * fpll = fref * mult / div1
642 * where:
643 * fref = 14.318MHz (69842ps)
644 * mult = reg0xb0.7:0
645 * div1 = (reg0xb1.5:0 + 1)
646 * div2 = 2^(reg0xb1.7:6)
647 * fpll should be between 115 and 260 MHz
648 * (8696ps and 3846ps)
649 */
650 static int
651 cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
652 struct fb_var_screeninfo *var)
653 {
654 u_long pll_ps = var->pixclock;
655 const u_long ref_ps = cfb->ref_ps;
656 u_int div2, t_div1, best_div1, best_mult;
657 int best_diff;
658 int vco;
659
660 /*
661 * Step 1:
662 * find div2 such that 115MHz < fpll < 260MHz
663 * and 0 <= div2 < 4
664 */
665 for (div2 = 0; div2 < 4; div2++) {
666 u_long new_pll;
667
668 new_pll = pll_ps / cfb->divisors[div2];
669 if (8696 > new_pll && new_pll > 3846) {
670 pll_ps = new_pll;
671 break;
672 }
673 }
674
675 if (div2 == 4)
676 return -EINVAL;
677
678 /*
679 * Step 2:
680 * Given pll_ps and ref_ps, find:
681 * pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
682 * where { 1 < best_div1 < 32, 1 < best_mult < 256 }
683 * pll_ps_calc = best_div1 / (ref_ps * best_mult)
684 */
685 best_diff = 0x7fffffff;
686 best_mult = 32;
687 best_div1 = 255;
688 for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) {
689 u_int rr, t_mult, t_pll_ps;
690 int diff;
691
692 /*
693 * Find the multiplier for this divisor
694 */
695 rr = ref_ps * t_div1;
696 t_mult = (rr + pll_ps / 2) / pll_ps;
697
698 /*
699 * Is the multiplier within the correct range?
700 */
701 if (t_mult > 256 || t_mult < 2)
702 continue;
703
704 /*
705 * Calculate the actual clock period from this multiplier
706 * and divisor, and estimate the error.
707 */
708 t_pll_ps = (rr + t_mult / 2) / t_mult;
709 diff = pll_ps - t_pll_ps;
710 if (diff < 0)
711 diff = -diff;
712
713 if (diff < best_diff) {
714 best_diff = diff;
715 best_mult = t_mult;
716 best_div1 = t_div1;
717 }
718
719 /*
720 * If we hit an exact value, there is no point in continuing.
721 */
722 if (diff == 0)
723 break;
724 }
725
726 /*
727 * Step 3:
728 * combine values
729 */
730 hw->clock_mult = best_mult - 1;
731 hw->clock_div = div2 << 6 | (best_div1 - 1);
732
733 vco = ref_ps * best_div1 / best_mult;
734 if ((ref_ps == 40690) && (vco < 5556))
735 /* Set VFSEL when VCO > 180MHz (5.556 ps). */
736 hw->clock_div |= EXT_DCLK_DIV_VFSEL;
737
738 return 0;
739 }
740
741 /*
742 * Set the User Defined Part of the Display
743 */
744 static int
745 cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
746 {
747 struct cfb_info *cfb = (struct cfb_info *)info;
748 struct par_info hw;
749 unsigned int mem;
750 int err;
751
752 var->transp.msb_right = 0;
753 var->red.msb_right = 0;
754 var->green.msb_right = 0;
755 var->blue.msb_right = 0;
756
757 switch (var->bits_per_pixel) {
758 case 8: /* PSEUDOCOLOUR, 256 */
759 var->transp.offset = 0;
760 var->transp.length = 0;
761 var->red.offset = 0;
762 var->red.length = 8;
763 var->green.offset = 0;
764 var->green.length = 8;
765 var->blue.offset = 0;
766 var->blue.length = 8;
767 break;
768
769 case 16:/* DIRECTCOLOUR, 64k or 32k */
770 switch (var->green.length) {
771 case 6: /* RGB565, 64k */
772 var->transp.offset = 0;
773 var->transp.length = 0;
774 var->red.offset = 11;
775 var->red.length = 5;
776 var->green.offset = 5;
777 var->green.length = 6;
778 var->blue.offset = 0;
779 var->blue.length = 5;
780 break;
781
782 default:
783 case 5: /* RGB555, 32k */
784 var->transp.offset = 0;
785 var->transp.length = 0;
786 var->red.offset = 10;
787 var->red.length = 5;
788 var->green.offset = 5;
789 var->green.length = 5;
790 var->blue.offset = 0;
791 var->blue.length = 5;
792 break;
793
794 case 4: /* RGB444, 4k + transparency? */
795 var->transp.offset = 12;
796 var->transp.length = 4;
797 var->red.offset = 8;
798 var->red.length = 4;
799 var->green.offset = 4;
800 var->green.length = 4;
801 var->blue.offset = 0;
802 var->blue.length = 4;
803 break;
804 }
805 break;
806
807 case 24:/* TRUECOLOUR, 16m */
808 var->transp.offset = 0;
809 var->transp.length = 0;
810 var->red.offset = 16;
811 var->red.length = 8;
812 var->green.offset = 8;
813 var->green.length = 8;
814 var->blue.offset = 0;
815 var->blue.length = 8;
816 break;
817
818 case 32:/* TRUECOLOUR, 16m */
819 var->transp.offset = 24;
820 var->transp.length = 8;
821 var->red.offset = 16;
822 var->red.length = 8;
823 var->green.offset = 8;
824 var->green.length = 8;
825 var->blue.offset = 0;
826 var->blue.length = 8;
827 break;
828
829 default:
830 return -EINVAL;
831 }
832
833 mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
834 if (mem > cfb->fb.fix.smem_len)
835 var->yres_virtual = cfb->fb.fix.smem_len * 8 /
836 (var->bits_per_pixel * var->xres_virtual);
837
838 if (var->yres > var->yres_virtual)
839 var->yres = var->yres_virtual;
840 if (var->xres > var->xres_virtual)
841 var->xres = var->xres_virtual;
842
843 err = cyber2000fb_decode_clock(&hw, cfb, var);
844 if (err)
845 return err;
846
847 err = cyber2000fb_decode_crtc(&hw, cfb, var);
848 if (err)
849 return err;
850
851 return 0;
852 }
853
854 static int cyber2000fb_set_par(struct fb_info *info)
855 {
856 struct cfb_info *cfb = (struct cfb_info *)info;
857 struct fb_var_screeninfo *var = &cfb->fb.var;
858 struct par_info hw;
859 unsigned int mem;
860
861 hw.width = var->xres_virtual;
862 hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
863
864 switch (var->bits_per_pixel) {
865 case 8:
866 hw.co_pixfmt = CO_PIXFMT_8BPP;
867 hw.pitch = hw.width >> 3;
868 hw.extseqmisc = EXT_SEQ_MISC_8;
869 break;
870
871 case 16:
872 hw.co_pixfmt = CO_PIXFMT_16BPP;
873 hw.pitch = hw.width >> 2;
874
875 switch (var->green.length) {
876 case 6: /* RGB565, 64k */
877 hw.extseqmisc = EXT_SEQ_MISC_16_RGB565;
878 break;
879 case 5: /* RGB555, 32k */
880 hw.extseqmisc = EXT_SEQ_MISC_16_RGB555;
881 break;
882 case 4: /* RGB444, 4k + transparency? */
883 hw.extseqmisc = EXT_SEQ_MISC_16_RGB444;
884 break;
885 default:
886 BUG();
887 }
888 case 24:/* TRUECOLOUR, 16m */
889 hw.co_pixfmt = CO_PIXFMT_24BPP;
890 hw.width *= 3;
891 hw.pitch = hw.width >> 3;
892 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
893 hw.extseqmisc = EXT_SEQ_MISC_24_RGB888;
894 break;
895
896 case 32:/* TRUECOLOUR, 16m */
897 hw.co_pixfmt = CO_PIXFMT_32BPP;
898 hw.pitch = hw.width >> 1;
899 hw.ramdac |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
900 hw.extseqmisc = EXT_SEQ_MISC_32;
901 break;
902
903 default:
904 BUG();
905 }
906
907 /*
908 * Sigh, this is absolutely disgusting, but caused by
909 * the way the fbcon developers want to separate out
910 * the "checking" and the "setting" of the video mode.
911 *
912 * If the mode is not suitable for the hardware here,
913 * we can't prevent it being set by returning an error.
914 *
915 * In theory, since NetWinders contain just one VGA card,
916 * we should never end up hitting this problem.
917 */
918 BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
919 BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
920
921 hw.width -= 1;
922 hw.fetch = hw.pitch;
923 if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
924 hw.fetch <<= 1;
925 hw.fetch += 1;
926
927 cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
928
929 /*
930 * Same here - if the size of the video mode exceeds the
931 * available RAM, we can't prevent this mode being set.
932 *
933 * In theory, since NetWinders contain just one VGA card,
934 * we should never end up hitting this problem.
935 */
936 mem = cfb->fb.fix.line_length * var->yres_virtual;
937 BUG_ON(mem > cfb->fb.fix.smem_len);
938
939 /*
940 * 8bpp displays are always pseudo colour. 16bpp and above
941 * are direct colour or true colour, depending on whether
942 * the RAMDAC palettes are bypassed. (Direct colour has
943 * palettes, true colour does not.)
944 */
945 if (var->bits_per_pixel == 8)
946 cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
947 else if (hw.ramdac & RAMDAC_BYPASS)
948 cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
949 else
950 cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
951
952 cyber2000fb_set_timing(cfb, &hw);
953 cyber2000fb_update_start(cfb, var);
954
955 return 0;
956 }
957
958
959 /*
960 * Pan or Wrap the Display
961 */
962 static int
963 cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
964 {
965 struct cfb_info *cfb = (struct cfb_info *)info;
966
967 if (cyber2000fb_update_start(cfb, var))
968 return -EINVAL;
969
970 cfb->fb.var.xoffset = var->xoffset;
971 cfb->fb.var.yoffset = var->yoffset;
972
973 if (var->vmode & FB_VMODE_YWRAP) {
974 cfb->fb.var.vmode |= FB_VMODE_YWRAP;
975 } else {
976 cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
977 }
978
979 return 0;
980 }
981
982 /*
983 * (Un)Blank the display.
984 *
985 * Blank the screen if blank_mode != 0, else unblank. If
986 * blank == NULL then the caller blanks by setting the CLUT
987 * (Color Look Up Table) to all black. Return 0 if blanking
988 * succeeded, != 0 if un-/blanking failed due to e.g. a
989 * video mode which doesn't support it. Implements VESA
990 * suspend and powerdown modes on hardware that supports
991 * disabling hsync/vsync:
992 * blank_mode == 2: suspend vsync
993 * blank_mode == 3: suspend hsync
994 * blank_mode == 4: powerdown
995 *
996 * wms...Enable VESA DMPS compatible powerdown mode
997 * run "setterm -powersave powerdown" to take advantage
998 */
999 static int cyber2000fb_blank(int blank, struct fb_info *info)
1000 {
1001 struct cfb_info *cfb = (struct cfb_info *)info;
1002 unsigned int sync = 0;
1003 int i;
1004
1005 switch (blank) {
1006 case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
1007 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
1008 break;
1009 case FB_BLANK_HSYNC_SUSPEND: /* hsync off */
1010 sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
1011 break;
1012 case FB_BLANK_VSYNC_SUSPEND: /* vsync off */
1013 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
1014 break;
1015 case FB_BLANK_NORMAL: /* soft blank */
1016 default: /* unblank */
1017 break;
1018 }
1019
1020 cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
1021
1022 if (blank <= 1) {
1023 /* turn on ramdacs */
1024 cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
1025 cyber2000fb_write_ramdac_ctrl(cfb);
1026 }
1027
1028 /*
1029 * Soft blank/unblank the display.
1030 */
1031 if (blank) { /* soft blank */
1032 for (i = 0; i < NR_PALETTE; i++) {
1033 cyber2000fb_writeb(i, 0x3c8, cfb);
1034 cyber2000fb_writeb(0, 0x3c9, cfb);
1035 cyber2000fb_writeb(0, 0x3c9, cfb);
1036 cyber2000fb_writeb(0, 0x3c9, cfb);
1037 }
1038 } else { /* unblank */
1039 for (i = 0; i < NR_PALETTE; i++) {
1040 cyber2000fb_writeb(i, 0x3c8, cfb);
1041 cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
1042 cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
1043 cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
1044 }
1045 }
1046
1047 if (blank >= 2) {
1048 /* turn off ramdacs */
1049 cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS | RAMDAC_RAMPWRDN;
1050 cyber2000fb_write_ramdac_ctrl(cfb);
1051 }
1052
1053 return 0;
1054 }
1055
1056 static struct fb_ops cyber2000fb_ops = {
1057 .owner = THIS_MODULE,
1058 .fb_check_var = cyber2000fb_check_var,
1059 .fb_set_par = cyber2000fb_set_par,
1060 .fb_setcolreg = cyber2000fb_setcolreg,
1061 .fb_blank = cyber2000fb_blank,
1062 .fb_pan_display = cyber2000fb_pan_display,
1063 .fb_fillrect = cyber2000fb_fillrect,
1064 .fb_copyarea = cyber2000fb_copyarea,
1065 .fb_imageblit = cyber2000fb_imageblit,
1066 .fb_cursor = soft_cursor,
1067 .fb_sync = cyber2000fb_sync,
1068 };
1069
1070 /*
1071 * This is the only "static" reference to the internal data structures
1072 * of this driver. It is here solely at the moment to support the other
1073 * CyberPro modules external to this driver.
1074 */
1075 static struct cfb_info *int_cfb_info;
1076
1077 /*
1078 * Enable access to the extended registers
1079 */
1080 void cyber2000fb_enable_extregs(struct cfb_info *cfb)
1081 {
1082 cfb->func_use_count += 1;
1083
1084 if (cfb->func_use_count == 1) {
1085 int old;
1086
1087 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1088 old |= EXT_FUNC_CTL_EXTREGENBL;
1089 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1090 }
1091 }
1092
1093 /*
1094 * Disable access to the extended registers
1095 */
1096 void cyber2000fb_disable_extregs(struct cfb_info *cfb)
1097 {
1098 if (cfb->func_use_count == 1) {
1099 int old;
1100
1101 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1102 old &= ~EXT_FUNC_CTL_EXTREGENBL;
1103 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1104 }
1105
1106 if (cfb->func_use_count == 0)
1107 printk(KERN_ERR "disable_extregs: count = 0\n");
1108 else
1109 cfb->func_use_count -= 1;
1110 }
1111
1112 void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var)
1113 {
1114 memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo));
1115 }
1116
1117 /*
1118 * Attach a capture/tv driver to the core CyberX0X0 driver.
1119 */
1120 int cyber2000fb_attach(struct cyberpro_info *info, int idx)
1121 {
1122 if (int_cfb_info != NULL) {
1123 info->dev = int_cfb_info->dev;
1124 info->regs = int_cfb_info->regs;
1125 info->fb = int_cfb_info->fb.screen_base;
1126 info->fb_size = int_cfb_info->fb.fix.smem_len;
1127 info->enable_extregs = cyber2000fb_enable_extregs;
1128 info->disable_extregs = cyber2000fb_disable_extregs;
1129 info->info = int_cfb_info;
1130
1131 strlcpy(info->dev_name, int_cfb_info->fb.fix.id, sizeof(info->dev_name));
1132 }
1133
1134 return int_cfb_info != NULL;
1135 }
1136
1137 /*
1138 * Detach a capture/tv driver from the core CyberX0X0 driver.
1139 */
1140 void cyber2000fb_detach(int idx)
1141 {
1142 }
1143
1144 EXPORT_SYMBOL(cyber2000fb_attach);
1145 EXPORT_SYMBOL(cyber2000fb_detach);
1146 EXPORT_SYMBOL(cyber2000fb_enable_extregs);
1147 EXPORT_SYMBOL(cyber2000fb_disable_extregs);
1148 EXPORT_SYMBOL(cyber2000fb_get_fb_var);
1149
1150 /*
1151 * These parameters give
1152 * 640x480, hsync 31.5kHz, vsync 60Hz
1153 */
1154 static struct fb_videomode __devinitdata cyber2000fb_default_mode = {
1155 .refresh = 60,
1156 .xres = 640,
1157 .yres = 480,
1158 .pixclock = 39722,
1159 .left_margin = 56,
1160 .right_margin = 16,
1161 .upper_margin = 34,
1162 .lower_margin = 9,
1163 .hsync_len = 88,
1164 .vsync_len = 2,
1165 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
1166 .vmode = FB_VMODE_NONINTERLACED
1167 };
1168
1169 static char igs_regs[] = {
1170 EXT_CRT_IRQ, 0,
1171 EXT_CRT_TEST, 0,
1172 EXT_SYNC_CTL, 0,
1173 EXT_SEG_WRITE_PTR, 0,
1174 EXT_SEG_READ_PTR, 0,
1175 EXT_BIU_MISC, EXT_BIU_MISC_LIN_ENABLE |
1176 EXT_BIU_MISC_COP_ENABLE |
1177 EXT_BIU_MISC_COP_BFC,
1178 EXT_FUNC_CTL, 0,
1179 CURS_H_START, 0,
1180 CURS_H_START + 1, 0,
1181 CURS_H_PRESET, 0,
1182 CURS_V_START, 0,
1183 CURS_V_START + 1, 0,
1184 CURS_V_PRESET, 0,
1185 CURS_CTL, 0,
1186 EXT_ATTRIB_CTL, EXT_ATTRIB_CTL_EXT,
1187 EXT_OVERSCAN_RED, 0,
1188 EXT_OVERSCAN_GREEN, 0,
1189 EXT_OVERSCAN_BLUE, 0,
1190
1191 /* some of these are questionable when we have a BIOS */
1192 EXT_MEM_CTL0, EXT_MEM_CTL0_7CLK |
1193 EXT_MEM_CTL0_RAS_1 |
1194 EXT_MEM_CTL0_MULTCAS,
1195 EXT_HIDDEN_CTL1, 0x30,
1196 EXT_FIFO_CTL, 0x0b,
1197 EXT_FIFO_CTL + 1, 0x17,
1198 0x76, 0x00,
1199 EXT_HIDDEN_CTL4, 0xc8
1200 };
1201
1202 /*
1203 * Initialise the CyberPro hardware. On the CyberPro5XXXX,
1204 * ensure that we're using the correct PLL (5XXX's may be
1205 * programmed to use an additional set of PLLs.)
1206 */
1207 static void cyberpro_init_hw(struct cfb_info *cfb)
1208 {
1209 int i;
1210
1211 for (i = 0; i < sizeof(igs_regs); i += 2)
1212 cyber2000_grphw(igs_regs[i], igs_regs[i+1], cfb);
1213
1214 if (cfb->id == ID_CYBERPRO_5000) {
1215 unsigned char val;
1216 cyber2000fb_writeb(0xba, 0x3ce, cfb);
1217 val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
1218 cyber2000fb_writeb(val, 0x3cf, cfb);
1219 }
1220 }
1221
1222 static struct cfb_info * __devinit
1223 cyberpro_alloc_fb_info(unsigned int id, char *name)
1224 {
1225 struct cfb_info *cfb;
1226
1227 cfb = kmalloc(sizeof(struct cfb_info) +
1228 sizeof(u32) * 16, GFP_KERNEL);
1229
1230 if (!cfb)
1231 return NULL;
1232
1233 memset(cfb, 0, sizeof(struct cfb_info));
1234
1235 cfb->id = id;
1236
1237 if (id == ID_CYBERPRO_5000)
1238 cfb->ref_ps = 40690; // 24.576 MHz
1239 else
1240 cfb->ref_ps = 69842; // 14.31818 MHz (69841?)
1241
1242 cfb->divisors[0] = 1;
1243 cfb->divisors[1] = 2;
1244 cfb->divisors[2] = 4;
1245
1246 if (id == ID_CYBERPRO_2000)
1247 cfb->divisors[3] = 8;
1248 else
1249 cfb->divisors[3] = 6;
1250
1251 strcpy(cfb->fb.fix.id, name);
1252
1253 cfb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
1254 cfb->fb.fix.type_aux = 0;
1255 cfb->fb.fix.xpanstep = 0;
1256 cfb->fb.fix.ypanstep = 1;
1257 cfb->fb.fix.ywrapstep = 0;
1258
1259 switch (id) {
1260 case ID_IGA_1682:
1261 cfb->fb.fix.accel = 0;
1262 break;
1263
1264 case ID_CYBERPRO_2000:
1265 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
1266 break;
1267
1268 case ID_CYBERPRO_2010:
1269 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
1270 break;
1271
1272 case ID_CYBERPRO_5000:
1273 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
1274 break;
1275 }
1276
1277 cfb->fb.var.nonstd = 0;
1278 cfb->fb.var.activate = FB_ACTIVATE_NOW;
1279 cfb->fb.var.height = -1;
1280 cfb->fb.var.width = -1;
1281 cfb->fb.var.accel_flags = FB_ACCELF_TEXT;
1282
1283 cfb->fb.fbops = &cyber2000fb_ops;
1284 cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
1285 cfb->fb.pseudo_palette = (void *)(cfb + 1);
1286
1287 fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
1288
1289 return cfb;
1290 }
1291
1292 static void
1293 cyberpro_free_fb_info(struct cfb_info *cfb)
1294 {
1295 if (cfb) {
1296 /*
1297 * Free the colourmap
1298 */
1299 fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
1300
1301 kfree(cfb);
1302 }
1303 }
1304
1305 /*
1306 * Parse Cyber2000fb options. Usage:
1307 * video=cyber2000:font:fontname
1308 */
1309 int
1310 cyber2000fb_setup(char *options)
1311 {
1312 char *opt;
1313
1314 if (!options || !*options)
1315 return 0;
1316
1317 while ((opt = strsep(&options, ",")) != NULL) {
1318 if (!*opt)
1319 continue;
1320
1321 if (strncmp(opt, "font:", 5) == 0) {
1322 strlcpy(default_font_storage, opt + 5, sizeof(default_font_storage));
1323 default_font = default_font_storage;
1324 continue;
1325 }
1326
1327 printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
1328 }
1329 return 0;
1330 }
1331
1332 /*
1333 * The CyberPro chips can be placed on many different bus types.
1334 * This probe function is common to all bus types. The bus-specific
1335 * probe function is expected to have:
1336 * - enabled access to the linear memory region
1337 * - memory mapped access to the registers
1338 * - initialised mem_ctl1 and mem_ctl2 appropriately.
1339 */
1340 static int __devinit cyberpro_common_probe(struct cfb_info *cfb)
1341 {
1342 u_long smem_size;
1343 u_int h_sync, v_sync;
1344 int err;
1345
1346 cyberpro_init_hw(cfb);
1347
1348 /*
1349 * Get the video RAM size and width from the VGA register.
1350 * This should have been already initialised by the BIOS,
1351 * but if it's garbage, claim default 1MB VRAM (woody)
1352 */
1353 cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
1354 cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
1355
1356 /*
1357 * Determine the size of the memory.
1358 */
1359 switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
1360 case MEM_CTL2_SIZE_4MB: smem_size = 0x00400000; break;
1361 case MEM_CTL2_SIZE_2MB: smem_size = 0x00200000; break;
1362 case MEM_CTL2_SIZE_1MB: smem_size = 0x00100000; break;
1363 default: smem_size = 0x00100000; break;
1364 }
1365
1366 cfb->fb.fix.smem_len = smem_size;
1367 cfb->fb.fix.mmio_len = MMIO_SIZE;
1368 cfb->fb.screen_base = cfb->region;
1369
1370 err = -EINVAL;
1371 if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
1372 &cyber2000fb_default_mode, 8)) {
1373 printk("%s: no valid mode found\n", cfb->fb.fix.id);
1374 goto failed;
1375 }
1376
1377 cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
1378 (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
1379
1380 if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
1381 cfb->fb.var.yres_virtual = cfb->fb.var.yres;
1382
1383 // fb_set_var(&cfb->fb.var, -1, &cfb->fb);
1384
1385 /*
1386 * Calculate the hsync and vsync frequencies. Note that
1387 * we split the 1e12 constant up so that we can preserve
1388 * the precision and fit the results into 32-bit registers.
1389 * (1953125000 * 512 = 1e12)
1390 */
1391 h_sync = 1953125000 / cfb->fb.var.pixclock;
1392 h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
1393 cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
1394 v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
1395 cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
1396
1397 printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
1398 cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
1399 cfb->fb.var.xres, cfb->fb.var.yres,
1400 h_sync / 1000, h_sync % 1000, v_sync);
1401
1402 if (cfb->dev)
1403 cfb->fb.device = &cfb->dev->dev;
1404 err = register_framebuffer(&cfb->fb);
1405
1406 failed:
1407 return err;
1408 }
1409
1410 static void cyberpro_common_resume(struct cfb_info *cfb)
1411 {
1412 cyberpro_init_hw(cfb);
1413
1414 /*
1415 * Reprogram the MEM_CTL1 and MEM_CTL2 registers
1416 */
1417 cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
1418 cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
1419
1420 /*
1421 * Restore the old video mode and the palette.
1422 * We also need to tell fbcon to redraw the console.
1423 */
1424 cyber2000fb_set_par(&cfb->fb);
1425 }
1426
1427 #ifdef CONFIG_ARCH_SHARK
1428
1429 #include <asm/arch/hardware.h>
1430
1431 static int __devinit
1432 cyberpro_vl_probe(void)
1433 {
1434 struct cfb_info *cfb;
1435 int err = -ENOMEM;
1436
1437 if (!request_mem_region(FB_START,FB_SIZE,"CyberPro2010")) return err;
1438
1439 cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
1440 if (!cfb)
1441 goto failed_release;
1442
1443 cfb->dev = NULL;
1444 cfb->region = ioremap(FB_START,FB_SIZE);
1445 if (!cfb->region)
1446 goto failed_ioremap;
1447
1448 cfb->regs = cfb->region + MMIO_OFFSET;
1449 cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
1450 cfb->fb.fix.smem_start = FB_START;
1451
1452 /*
1453 * Bring up the hardware. This is expected to enable access
1454 * to the linear memory region, and allow access to the memory
1455 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
1456 * initialised.
1457 */
1458 cyber2000fb_writeb(0x18, 0x46e8, cfb);
1459 cyber2000fb_writeb(0x01, 0x102, cfb);
1460 cyber2000fb_writeb(0x08, 0x46e8, cfb);
1461 cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
1462 cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
1463
1464 cfb->mclk_mult = 0xdb;
1465 cfb->mclk_div = 0x54;
1466
1467 err = cyberpro_common_probe(cfb);
1468 if (err)
1469 goto failed;
1470
1471 if (int_cfb_info == NULL)
1472 int_cfb_info = cfb;
1473
1474 return 0;
1475
1476 failed:
1477 iounmap(cfb->region);
1478 failed_ioremap:
1479 cyberpro_free_fb_info(cfb);
1480 failed_release:
1481 release_mem_region(FB_START,FB_SIZE);
1482
1483 return err;
1484 }
1485 #endif /* CONFIG_ARCH_SHARK */
1486
1487 /*
1488 * PCI specific support.
1489 */
1490 #ifdef CONFIG_PCI
1491 /*
1492 * We need to wake up the CyberPro, and make sure its in linear memory
1493 * mode. Unfortunately, this is specific to the platform and card that
1494 * we are running on.
1495 *
1496 * On x86 and ARM, should we be initialising the CyberPro first via the
1497 * IO registers, and then the MMIO registers to catch all cases? Can we
1498 * end up in the situation where the chip is in MMIO mode, but not awake
1499 * on an x86 system?
1500 */
1501 static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
1502 {
1503 unsigned char val;
1504
1505 #if defined(__sparc_v9__)
1506 #error "You lose, consult DaveM."
1507 #elif defined(__sparc__)
1508 /*
1509 * SPARC does not have an "outb" instruction, so we generate
1510 * I/O cycles storing into a reserved memory space at
1511 * physical address 0x3000000
1512 */
1513 unsigned char *iop;
1514
1515 iop = ioremap(0x3000000, 0x5000);
1516 if (iop == NULL) {
1517 prom_printf("iga5000: cannot map I/O\n");
1518 return -ENOMEM;
1519 }
1520
1521 writeb(0x18, iop + 0x46e8);
1522 writeb(0x01, iop + 0x102);
1523 writeb(0x08, iop + 0x46e8);
1524 writeb(EXT_BIU_MISC, iop + 0x3ce);
1525 writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
1526
1527 iounmap((void *)iop);
1528 #else
1529 /*
1530 * Most other machine types are "normal", so
1531 * we use the standard IO-based wakeup.
1532 */
1533 outb(0x18, 0x46e8);
1534 outb(0x01, 0x102);
1535 outb(0x08, 0x46e8);
1536 outb(EXT_BIU_MISC, 0x3ce);
1537 outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
1538 #endif
1539
1540 /*
1541 * Allow the CyberPro to accept PCI burst accesses
1542 */
1543 val = cyber2000_grphr(EXT_BUS_CTL, cfb);
1544 if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
1545 printk(KERN_INFO "%s: enabling PCI bursts\n", cfb->fb.fix.id);
1546
1547 val |= EXT_BUS_CTL_PCIBURST_WRITE;
1548
1549 if (cfb->id == ID_CYBERPRO_5000)
1550 val |= EXT_BUS_CTL_PCIBURST_READ;
1551
1552 cyber2000_grphw(EXT_BUS_CTL, val, cfb);
1553 }
1554
1555 return 0;
1556 }
1557
1558 static int __devinit
1559 cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
1560 {
1561 struct cfb_info *cfb;
1562 char name[16];
1563 int err;
1564
1565 sprintf(name, "CyberPro%4X", id->device);
1566
1567 err = pci_enable_device(dev);
1568 if (err)
1569 return err;
1570
1571 err = pci_request_regions(dev, name);
1572 if (err)
1573 return err;
1574
1575 err = -ENOMEM;
1576 cfb = cyberpro_alloc_fb_info(id->driver_data, name);
1577 if (!cfb)
1578 goto failed_release;
1579
1580 cfb->dev = dev;
1581 cfb->region = ioremap(pci_resource_start(dev, 0),
1582 pci_resource_len(dev, 0));
1583 if (!cfb->region)
1584 goto failed_ioremap;
1585
1586 cfb->regs = cfb->region + MMIO_OFFSET;
1587 cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
1588 cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
1589
1590 /*
1591 * Bring up the hardware. This is expected to enable access
1592 * to the linear memory region, and allow access to the memory
1593 * mapped registers. Also, mem_ctl1 and mem_ctl2 must be
1594 * initialised.
1595 */
1596 err = cyberpro_pci_enable_mmio(cfb);
1597 if (err)
1598 goto failed;
1599
1600 /*
1601 * Use MCLK from BIOS. FIXME: what about hotplug?
1602 */
1603 cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
1604 cfb->mclk_div = cyber2000_grphr(EXT_MCLK_DIV, cfb);
1605
1606 #ifdef __arm__
1607 /*
1608 * MCLK on the NetWinder and the Shark is fixed at 75MHz
1609 */
1610 if (machine_is_netwinder()) {
1611 cfb->mclk_mult = 0xdb;
1612 cfb->mclk_div = 0x54;
1613 }
1614 #endif
1615
1616 err = cyberpro_common_probe(cfb);
1617 if (err)
1618 goto failed;
1619
1620 /*
1621 * Our driver data
1622 */
1623 pci_set_drvdata(dev, cfb);
1624 if (int_cfb_info == NULL)
1625 int_cfb_info = cfb;
1626
1627 return 0;
1628
1629 failed:
1630 iounmap(cfb->region);
1631 failed_ioremap:
1632 cyberpro_free_fb_info(cfb);
1633 failed_release:
1634 pci_release_regions(dev);
1635
1636 return err;
1637 }
1638
1639 static void __devexit cyberpro_pci_remove(struct pci_dev *dev)
1640 {
1641 struct cfb_info *cfb = pci_get_drvdata(dev);
1642
1643 if (cfb) {
1644 /*
1645 * If unregister_framebuffer fails, then
1646 * we will be leaving hooks that could cause
1647 * oopsen laying around.
1648 */
1649 if (unregister_framebuffer(&cfb->fb))
1650 printk(KERN_WARNING "%s: danger Will Robinson, "
1651 "danger danger! Oopsen imminent!\n",
1652 cfb->fb.fix.id);
1653 iounmap(cfb->region);
1654 cyberpro_free_fb_info(cfb);
1655
1656 /*
1657 * Ensure that the driver data is no longer
1658 * valid.
1659 */
1660 pci_set_drvdata(dev, NULL);
1661 if (cfb == int_cfb_info)
1662 int_cfb_info = NULL;
1663
1664 pci_release_regions(dev);
1665 }
1666 }
1667
1668 static int cyberpro_pci_suspend(struct pci_dev *dev, u32 state)
1669 {
1670 return 0;
1671 }
1672
1673 /*
1674 * Re-initialise the CyberPro hardware
1675 */
1676 static int cyberpro_pci_resume(struct pci_dev *dev)
1677 {
1678 struct cfb_info *cfb = pci_get_drvdata(dev);
1679
1680 if (cfb) {
1681 cyberpro_pci_enable_mmio(cfb);
1682 cyberpro_common_resume(cfb);
1683 }
1684
1685 return 0;
1686 }
1687
1688 static struct pci_device_id cyberpro_pci_table[] = {
1689 // Not yet
1690 // { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
1691 // PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
1692 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
1693 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
1694 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
1695 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
1696 { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
1697 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
1698 { 0, }
1699 };
1700
1701 MODULE_DEVICE_TABLE(pci,cyberpro_pci_table);
1702
1703 static struct pci_driver cyberpro_driver = {
1704 .name = "CyberPro",
1705 .probe = cyberpro_pci_probe,
1706 .remove = __devexit_p(cyberpro_pci_remove),
1707 .suspend = cyberpro_pci_suspend,
1708 .resume = cyberpro_pci_resume,
1709 .id_table = cyberpro_pci_table
1710 };
1711 #endif
1712
1713 /*
1714 * I don't think we can use the "module_init" stuff here because
1715 * the fbcon stuff may not be initialised yet. Hence the #ifdef
1716 * around module_init.
1717 *
1718 * Tony: "module_init" is now required
1719 */
1720 int __init cyber2000fb_init(void)
1721 {
1722 int ret = -1, err;
1723
1724 #ifndef MODULE
1725 char *option = NULL;
1726
1727 if (fb_get_options("cyber2000fb", &option))
1728 return -ENODEV;
1729 cyber2000fb_setup(option);
1730 #endif
1731
1732 #ifdef CONFIG_ARCH_SHARK
1733 err = cyberpro_vl_probe();
1734 if (!err) {
1735 ret = 0;
1736 __module_get(THIS_MODULE);
1737 }
1738 #endif
1739 #ifdef CONFIG_PCI
1740 err = pci_module_init(&cyberpro_driver);
1741 if (!err)
1742 ret = 0;
1743 #endif
1744
1745 return ret ? err : 0;
1746 }
1747
1748 static void __exit cyberpro_exit(void)
1749 {
1750 pci_unregister_driver(&cyberpro_driver);
1751 }
1752
1753 module_init(cyber2000fb_init);
1754 module_exit(cyberpro_exit);
1755
1756 MODULE_AUTHOR("Russell King");
1757 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
1758 MODULE_LICENSE("GPL");
1759
|
This page was automatically generated by the
LXR engine.
|