1 /* Driver for USB Mass Storage compliant devices
2 * Debugging Functions Source Code File
3 *
4 * $Id: debug.c,v 1.9 2002/04/22 03:39:43 mdharm Exp $
5 *
6 * Current development and maintenance by:
7 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
8 *
9 * Developed with the assistance of:
10 * (c) 2002 Alan Stern <stern@rowland.org>
11 *
12 * Initial work by:
13 * (c) 1999 Michael Gee (michael@linuxspecific.com)
14 *
15 * This driver is based on the 'USB Mass Storage Class' document. This
16 * describes in detail the protocol used to communicate with such
17 * devices. Clearly, the designers had SCSI and ATAPI commands in
18 * mind when they created this document. The commands are all very
19 * similar to commands in the SCSI-II and ATAPI specifications.
20 *
21 * It is important to note that in a number of cases this class
22 * exhibits class-specific exemptions from the USB specification.
23 * Notably the usage of NAK, STALL and ACK differs from the norm, in
24 * that they are used to communicate wait, failed and OK on commands.
25 *
26 * Also, for certain devices, the interrupt endpoint is used to convey
27 * status of a command.
28 *
29 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
30 * information about this driver.
31 *
32 * This program is free software; you can redistribute it and/or modify it
33 * under the terms of the GNU General Public License as published by the
34 * Free Software Foundation; either version 2, or (at your option) any
35 * later version.
36 *
37 * This program is distributed in the hope that it will be useful, but
38 * WITHOUT ANY WARRANTY; without even the implied warranty of
39 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
40 * General Public License for more details.
41 *
42 * You should have received a copy of the GNU General Public License along
43 * with this program; if not, write to the Free Software Foundation, Inc.,
44 * 675 Mass Ave, Cambridge, MA 02139, USA.
45 */
46
47 #include <linux/cdrom.h>
48 #include <scsi/scsi.h>
49 #include <scsi/scsi_cmnd.h>
50 #include <scsi/scsi_dbg.h>
51
52 #include "debug.h"
53 #include "scsi.h"
54
55
56 void usb_stor_show_command(struct scsi_cmnd *srb)
57 {
58 char *what = NULL;
59 int i;
60
61 switch (srb->cmnd[0]) {
62 case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
63 case REZERO_UNIT: what = "REZERO_UNIT"; break;
64 case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
65 case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
66 case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
67 case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
68 case READ_6: what = "READ_6"; break;
69 case WRITE_6: what = "WRITE_6"; break;
70 case SEEK_6: what = "SEEK_6"; break;
71 case READ_REVERSE: what = "READ_REVERSE"; break;
72 case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
73 case SPACE: what = "SPACE"; break;
74 case INQUIRY: what = "INQUIRY"; break;
75 case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
76 case MODE_SELECT: what = "MODE_SELECT"; break;
77 case RESERVE: what = "RESERVE"; break;
78 case RELEASE: what = "RELEASE"; break;
79 case COPY: what = "COPY"; break;
80 case ERASE: what = "ERASE"; break;
81 case MODE_SENSE: what = "MODE_SENSE"; break;
82 case START_STOP: what = "START_STOP"; break;
83 case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
84 case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
85 case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
86 case SET_WINDOW: what = "SET_WINDOW"; break;
87 case READ_CAPACITY: what = "READ_CAPACITY"; break;
88 case READ_10: what = "READ_10"; break;
89 case WRITE_10: what = "WRITE_10"; break;
90 case SEEK_10: what = "SEEK_10"; break;
91 case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
92 case VERIFY: what = "VERIFY"; break;
93 case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
94 case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
95 case SEARCH_LOW: what = "SEARCH_LOW"; break;
96 case SET_LIMITS: what = "SET_LIMITS"; break;
97 case READ_POSITION: what = "READ_POSITION"; break;
98 case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
99 case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
100 case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
101 case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
102 case COMPARE: what = "COMPARE"; break;
103 case COPY_VERIFY: what = "COPY_VERIFY"; break;
104 case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
105 case READ_BUFFER: what = "READ_BUFFER"; break;
106 case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
107 case READ_LONG: what = "READ_LONG"; break;
108 case WRITE_LONG: what = "WRITE_LONG"; break;
109 case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
110 case WRITE_SAME: what = "WRITE_SAME"; break;
111 case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break;
112 case READ_TOC: what = "READ_TOC"; break;
113 case GPCMD_READ_HEADER: what = "READ HEADER"; break;
114 case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break;
115 case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break;
116 case GPCMD_GET_EVENT_STATUS_NOTIFICATION:
117 what = "GET EVENT/STATUS NOTIFICATION"; break;
118 case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break;
119 case LOG_SELECT: what = "LOG_SELECT"; break;
120 case LOG_SENSE: what = "LOG_SENSE"; break;
121 case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break;
122 case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break;
123 case GPCMD_READ_TRACK_RZONE_INFO:
124 what = "READ TRACK INFORMATION"; break;
125 case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break;
126 case GPCMD_SEND_OPC: what = "SEND OPC"; break;
127 case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
128 case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break;
129 case 0x59: what = "READ MASTER CUE"; break;
130 case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
131 case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break;
132 case 0x5C: what = "READ BUFFER CAPACITY"; break;
133 case 0x5D: what = "SEND CUE SHEET"; break;
134 case GPCMD_BLANK: what = "BLANK"; break;
135 case REPORT_LUNS: what = "REPORT LUNS"; break;
136 case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break;
137 case READ_12: what = "READ_12"; break;
138 case WRITE_12: what = "WRITE_12"; break;
139 case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
140 case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
141 case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
142 case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
143 case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
144 case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
145 case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break;
146 case GPCMD_SCAN: what = "SCAN"; break;
147 case GPCMD_SET_SPEED: what = "SET CD SPEED"; break;
148 case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break;
149 case GPCMD_READ_CD: what = "READ CD"; break;
150 case 0xE1: what = "WRITE CONTINUE"; break;
151 case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
152 default: what = "(unknown command)"; break;
153 }
154 US_DEBUGP("Command %s (%d bytes)\n", what, srb->cmd_len);
155 US_DEBUGP("");
156 for (i = 0; i < srb->cmd_len && i < 16; i++)
157 US_DEBUGPX(" %02x", srb->cmnd[i]);
158 US_DEBUGPX("\n");
159 }
160
161 void usb_stor_show_sense(
162 unsigned char key,
163 unsigned char asc,
164 unsigned char ascq) {
165
166 const char *what, *keystr;
167
168 keystr = scsi_sense_key_string(key);
169 what = scsi_extd_sense_format(asc, ascq);
170
171 if (keystr == NULL)
172 keystr = "(Unknown Key)";
173 if (what == NULL)
174 what = "(unknown ASC/ASCQ)";
175
176 US_DEBUGP("%s: ", keystr);
177 US_DEBUGPX(what, ascq);
178 US_DEBUGPX("\n");
179 }
180
|
This page was automatically generated by the
LXR engine.
|