1 #define SUSBCRequest_SetBaudRateParityAndStopBits 1
2 #define SUSBCR_SBR_MASK 0xFF00
3 #define SUSBCR_SBR_1200 0x0100
4 #define SUSBCR_SBR_9600 0x0200
5 #define SUSBCR_SBR_19200 0x0400
6 #define SUSBCR_SBR_28800 0x0800
7 #define SUSBCR_SBR_38400 0x1000
8 #define SUSBCR_SBR_57600 0x2000
9 #define SUSBCR_SBR_115200 0x4000
10
11 #define SUSBCR_SPASB_MASK 0x0070
12 #define SUSBCR_SPASB_NoParity 0x0010
13 #define SUSBCR_SPASB_OddParity 0x0020
14 #define SUSBCR_SPASB_EvenParity 0x0040
15
16 #define SUSBCR_SPASB_STPMASK 0x0003
17 #define SUSBCR_SPASB_1StopBit 0x0001
18 #define SUSBCR_SPASB_2StopBits 0x0002
19
20 #define SUSBCRequest_SetStatusLinesOrQueues 2
21 #define SUSBCR_SSL_SETRTS 0x0001
22 #define SUSBCR_SSL_CLRRTS 0x0002
23 #define SUSBCR_SSL_SETDTR 0x0004
24 #define SUSBCR_SSL_CLRDTR 0x0010
25
26 #define SUSBCR_SSL_PURGE_TXABORT 0x0100 // Kill the pending/current writes to the comm port.
27 #define SUSBCR_SSL_PURGE_RXABORT 0x0200 // Kill the pending/current reads to the comm port.
28 #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 // Kill the transmit queue if there.
29 #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 // Kill the typeahead buffer if there.
30
31 #define SUSBCRequest_GetStatusLineState 4
32 #define SUSBCR_GSL_RXCHAR 0x0001 // Any Character received
33 #define SUSBCR_GSL_TXEMPTY 0x0004 // Transmitt Queue Empty
34 #define SUSBCR_GSL_CTS 0x0008 // CTS changed state
35 #define SUSBCR_GSL_DSR 0x0010 // DSR changed state
36 #define SUSBCR_GSL_RLSD 0x0020 // RLSD changed state
37 #define SUSBCR_GSL_BREAK 0x0040 // BREAK received
38 #define SUSBCR_GSL_ERR 0x0080 // Line status error occurred
39 #define SUSBCR_GSL_RING 0x0100 // Ring signal detected
40
41 #define SUSBCRequest_Misc 8
42 #define SUSBCR_MSC_ResetReader 0x0001 // use a predefined reset sequence
43 #define SUSBCR_MSC_ResetAllQueues 0x0002 // use a predefined sequence to reset the internal queues
44
45 #define SUSBCRequest_GetMisc 0x10
46 #define SUSBCR_MSC_GetFWVersion 0x0001 /* get the firmware version from device,
47 coded like this 0xHHLLBBPP
48 with HH = Firmware Version High Byte
49 LL = Firmware Version Low Byte
50 BB = Build Number
51 PP = Further Attributes
52 */
53
54 #define SUSBCR_MSC_GetHWVersion 0x0002 /* get the hardware version from device
55 coded like this 0xHHLLPPRR
56 with HH = Software Version High Byte
57 LL = Software Version Low Byte
58 PP = Further Attributes
59 RR = Reserved for the hardware ID
60 */
61
|
This page was automatically generated by the
LXR engine.
|