1 /*
2 * Definitions for the FTDI USB Single Port Serial Converter -
3 * known as FTDI_SIO (Serial Input/Output application of the chipset)
4 *
5 * The example I have is known as the USC-1000 which is available from
6 * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
7 * http://www.dansdata.com/usbser.htm but I can't be sure There are other
8 * USC-1000s which don't look like my device though so beware!
9 *
10 * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
11 * USB on the other.
12 *
13 * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details
14 * of the protocol required to talk to the device and ongoing assistence
15 * during development.
16 *
17 * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
18 * FTDI_SIO implementation.
19 *
20 * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
21 * from Rudolf Gugler
22 *
23 */
24
25 #define FTDI_VID 0x0403 /* Vendor Id */
26 #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
27 #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
28 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
29 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
30 #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
31 #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
32 #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
33 #define FTDI_NF_RIC_PID 0x0001 /* Product Id */
34 #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
35
36
37 /* www.canusb.com Lawicel CANUSB device */
38 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
39
40 /* AlphaMicro Components AMC-232USB01 device */
41 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
42
43 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
44 #define FTDI_ACTZWAVE_PID 0xF2D0
45
46
47 /* www.starting-point-systems.com µChameleon device */
48 #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
49
50 /* www.irtrans.de device */
51 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
52
53
54 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
55 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */
56
57 /* iPlus device */
58 #define FTDI_IPLUS_PID 0xD070 /* Product Id */
59 #define FTDI_IPLUS2_PID 0xD071 /* Product Id */
60
61 /* DMX4ALL DMX Interfaces */
62 #define FTDI_DMX4ALL 0xC850
63
64 /* OpenDCC (www.opendcc.de) product id */
65 #define FTDI_OPENDCC_PID 0xBFD8
66
67 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
68 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
69 #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
70 #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
71 #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
72 #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
73 #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
74 #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
75 #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
76 #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
77
78 /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
79 /* broadband internet service. The following PID is exhibited by the usb device supplied */
80 /* (the VID is the standard ftdi vid (FTDI_VID) */
81 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
82
83 /*
84 * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device
85 * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
86 * (the VID is the standard ftdi vid (FTDI_VID) */
87 #define FTDI_PCDJ_DAC2_PID 0xFA88
88
89 /*
90 * The following are the values for the Matrix Orbital LCD displays,
91 * which are the FT232BM ( similar to the 8U232AM )
92 */
93 #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
94 #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
95 #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
96 #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
97 #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
98 #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
99 #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
100
101 /* OOCDlink by Joern Kaipf <joernk@web.de>
102 * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
103 #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
104
105 /*
106 * The following are the values for the Matrix Orbital VK204-25-USB
107 * display, which use the FT232RL.
108 */
109 #define MTXORB_VK_VID 0x1b3d
110 #define MTXORB_VK_PID 0x0158
111
112 /* Interbiometrics USB I/O Board */
113 /* Developed for Interbiometrics by Rudolf Gugler */
114 #define INTERBIOMETRICS_VID 0x1209
115 #define INTERBIOMETRICS_IOBOARD_PID 0x1002
116 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
117
118 /*
119 * The following are the values for the Perle Systems
120 * UltraPort USB serial converters
121 */
122 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
123
124 /*
125 * The following are the values for the Sealevel SeaLINK+ adapters.
126 * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
127 * removed some PIDs that don't seem to match any existing products.)
128 */
129 #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
130 #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
131 #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
132 #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
133 #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
134 #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
135 #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
136 #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
137 #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
138 #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
139 #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
140 #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
141 #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
142 #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
143 #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
144 #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
145 #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
146 #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
147 #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
148 #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
149 #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
150 #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
151 #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
152 #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
153 #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
154 #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
155 #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
156 #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
157 #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
158 #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
159 #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
160 #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
161 #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
162 #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
163 #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
164 #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
165 #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
166 #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
167 #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
168 #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
169 #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
170 #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
171 #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
172 #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
173 #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
174 #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
175 #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
176 #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
177
178 /*
179 * The following are the values for two KOBIL chipcard terminals.
180 */
181 #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
182 #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
183 #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
184
185 /*
186 * Icom ID-1 digital transceiver
187 */
188
189 #define ICOM_ID1_VID 0x0C26
190 #define ICOM_ID1_PID 0x0004
191
192 /*
193 * ASK.fr devices
194 */
195 #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
196
197 /*
198 * FTDI USB UART chips used in construction projects from the
199 * Elektor Electronics magazine (http://elektor-electronics.co.uk)
200 */
201 #define ELEKTOR_VID 0x0C7D
202 #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
203
204 /*
205 * DSS-20 Sync Station for Sony Ericsson P800
206 */
207 #define FTDI_DSS20_PID 0xFC82
208
209 /*
210 * Home Electronics (www.home-electro.com) USB gadgets
211 */
212 #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
213
214 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
215 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
216 #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
217
218 /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
219
220 #define FTDI_TNC_X_PID 0xEBE0
221
222 /*
223 * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
224 * All of these devices use FTDI's vendor ID (0x0403).
225 *
226 * The previously included PID for the UO 100 module was incorrect.
227 * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
228 *
229 * Armin Laeuger originally sent the PID for the UM 100 module.
230 */
231 #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
232 #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
233 #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
234 #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
235 /* Additional ELV PIDs that default to using the FTDI D2XX drivers on
236 * MS Windows, rather than the FTDI Virtual Com Port drivers.
237 * Maybe these will be easier to use with the libftdi/libusb user-space
238 * drivers, or possibly the Comedi drivers in some cases. */
239 #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
240 #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
241 #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
242 #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
243 #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
244 #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
245 #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
246 #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
247 #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
248 #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
249 #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
250 #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
251 #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
252 #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
253 #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
254 #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
255 #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
256 #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
257 #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
258 #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
259 #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
260
261 /*
262 * Definitions for ID TECH (www.idt-net.com) devices
263 */
264 #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
265 #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
266
267 /*
268 * Definitions for Omnidirectional Control Technology, Inc. devices
269 */
270 #define OCT_VID 0x0B39 /* OCT vendor ID */
271 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
272 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
273 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
274 #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
275
276 /* an infrared receiver for user access control with IR tags */
277 #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
278
279 /*
280 * Definitions for Artemis astronomical USB based cameras
281 * Check it at http://www.artemisccd.co.uk/
282 */
283 #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
284
285 /*
286 * Definitions for ATIK Instruments astronomical USB based cameras
287 * Check it at http://www.atik-instruments.com/
288 */
289 #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
290 #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
291 #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
292 #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
293 #define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
294
295 /*
296 * Protego product ids
297 */
298 #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
299 #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
300 #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
301 #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
302
303 /*
304 * Gude Analog- und Digitalsysteme GmbH
305 */
306 #define FTDI_GUDEADS_E808_PID 0xE808
307 #define FTDI_GUDEADS_E809_PID 0xE809
308 #define FTDI_GUDEADS_E80A_PID 0xE80A
309 #define FTDI_GUDEADS_E80B_PID 0xE80B
310 #define FTDI_GUDEADS_E80C_PID 0xE80C
311 #define FTDI_GUDEADS_E80D_PID 0xE80D
312 #define FTDI_GUDEADS_E80E_PID 0xE80E
313 #define FTDI_GUDEADS_E80F_PID 0xE80F
314 #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
315 #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
316 #define FTDI_GUDEADS_E88A_PID 0xE88A
317 #define FTDI_GUDEADS_E88B_PID 0xE88B
318 #define FTDI_GUDEADS_E88C_PID 0xE88C
319 #define FTDI_GUDEADS_E88D_PID 0xE88D
320 #define FTDI_GUDEADS_E88E_PID 0xE88E
321 #define FTDI_GUDEADS_E88F_PID 0xE88F
322
323 /*
324 * Linx Technologies product ids
325 */
326 #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
327 #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
328 #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
329 #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
330 #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
331
332 /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
333 /* unit for PIC16's/PIC18's */
334 #define FTDI_CCSICDU20_0_PID 0xF9D0
335 #define FTDI_CCSICDU40_1_PID 0xF9D1
336 #define FTDI_CCSMACHX_2_PID 0xF9D2
337
338 /* Inside Accesso contactless reader (http://www.insidefr.com) */
339 #define INSIDE_ACCESSO 0xFAD0
340
341 /*
342 * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
343 */
344 #define INTREPID_VID 0x093C
345 #define INTREPID_VALUECAN_PID 0x0601
346 #define INTREPID_NEOVI_PID 0x0701
347
348 /*
349 * Falcom Wireless Communications GmbH
350 */
351 #define FALCOM_VID 0x0F94 /* Vendor Id */
352 #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
353 #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
354
355 /*
356 * SUUNTO product ids
357 */
358 #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
359
360 /*
361 * TTi (Thurlby Thandar Instruments)
362 */
363 #define TTI_VID 0x103E /* Vendor Id */
364 #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
365
366 /*
367 * Definitions for B&B Electronics products.
368 */
369 #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
370 #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
371 #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
372 #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
373
374 /*
375 * RM Michaelides CANview USB (http://www.rmcan.com)
376 * CAN fieldbus interface adapter, added by port GmbH www.port.de)
377 * Ian Abbott changed the macro names for consistency.
378 */
379 #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
380
381 /*
382 * EVER Eco Pro UPS (http://www.ever.com.pl/)
383 */
384
385 #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
386
387 /*
388 * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
389 * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
390 * and I'm not entirely sure which are used by which.
391 */
392 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
393 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
394
395 /*
396 * Mobility Electronics products.
397 */
398 #define MOBILITY_VID 0x1342
399 #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
400
401 /*
402 * microHAM product IDs (http://www.microham.com).
403 * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
404 * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
405 * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
406 */
407 #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
408 #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
409 #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
410 #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
411 #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
412 #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
413 #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
414 #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
415
416 /*
417 * Active Robots product ids.
418 */
419 #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
420
421 /*
422 * Xsens Technologies BV products (http://www.xsens.com).
423 */
424 #define XSENS_CONVERTER_0_PID 0xD388
425 #define XSENS_CONVERTER_1_PID 0xD389
426 #define XSENS_CONVERTER_2_PID 0xD38A
427 #define XSENS_CONVERTER_3_PID 0xD38B
428 #define XSENS_CONVERTER_4_PID 0xD38C
429 #define XSENS_CONVERTER_5_PID 0xD38D
430 #define XSENS_CONVERTER_6_PID 0xD38E
431 #define XSENS_CONVERTER_7_PID 0xD38F
432
433 /*
434 * Teratronik product ids.
435 * Submitted by O. Wölfelschneider.
436 */
437 #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
438 #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
439
440 /*
441 * Evolution Robotics products (http://www.evolution.com/).
442 * Submitted by Shawn M. Lavelle.
443 */
444 #define EVOLUTION_VID 0xDEEE /* Vendor ID */
445 #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
446 #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
447 #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
448 #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
449
450 /* Pyramid Computer GmbH */
451 #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
452
453 /*
454 * Posiflex inc retail equipment (http://www.posiflex.com.tw)
455 */
456 #define POSIFLEX_VID 0x0d3a /* Vendor ID */
457 #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
458
459 /*
460 * Westrex International devices submitted by Cory Lee
461 */
462 #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
463 #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
464
465 /*
466 * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
467 */
468 #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
469
470 /*
471 * Eclo (http://www.eclo.pt/) product IDs.
472 * PID 0xEA90 submitted by Martin Grill.
473 */
474 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
475
476 /*
477 * Papouch products (http://www.papouch.com/)
478 * Submitted by Folkert van Heusden
479 */
480
481 #define PAPOUCH_VID 0x5050 /* Vendor ID */
482 #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
483
484 /*
485 * ACG Identification Technologies GmbH products (http://www.acg.de/).
486 * Submitted by anton -at- goto10 -dot- org.
487 */
488 #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
489
490 /*
491 * Yost Engineering, Inc. products (www.yostengineering.com).
492 * PID 0xE050 submitted by Aaron Prose.
493 */
494 #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
495
496 /*
497 * ThorLabs USB motor drivers
498 */
499 #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
500
501 /*
502 * Testo products (http://www.testo.com/)
503 * Submitted by Colin Leroy
504 */
505 #define TESTO_VID 0x128D
506 #define TESTO_USB_INTERFACE_PID 0x0001
507
508 /*
509 * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
510 */
511 #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
512
513 /*
514 * Tactrix OpenPort (ECU) devices.
515 * OpenPort 1.3M submitted by Donour Sizemore.
516 * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
517 */
518 #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
519 #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
520 #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
521
522 /*
523 * Telldus Technologies
524 */
525 #define TELLDUS_VID 0x1781 /* Vendor ID */
526 #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
527
528 /*
529 * IBS elektronik product ids
530 * Submitted by Thomas Schleusener
531 */
532 #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
533 #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
534 #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
535 #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
536 #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
537 #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
538 #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
539 #define FTDI_IBS_PROD_PID 0xff3f /* future device */
540
541 /*
542 * MaxStream devices www.maxstream.net
543 */
544 #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
545
546 /* Olimex */
547 #define OLIMEX_VID 0x15BA
548 #define OLIMEX_ARM_USB_OCD_PID 0x0003
549
550 /* www.elsterelectricity.com Elster Unicom III Optical Probe */
551 #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
552
553 /*
554 * The Mobility Lab (TML)
555 * Submitted by Pierre Castella
556 */
557 #define TML_VID 0x1B91 /* Vendor ID */
558 #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
559
560 /* Propox devices */
561 #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
562
563 /* Commands */
564 #define FTDI_SIO_RESET 0 /* Reset the port */
565 #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
566 #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */
567 #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */
568 #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */
569 #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */
570 #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */
571 #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
572 #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */
573 #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */
574
575
576 /*
577 * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
578 * Submitted by Harald Welte <laforge@openmoko.org>
579 */
580 #define FIC_VID 0x1457
581 #define FIC_NEO1973_DEBUG_PID 0x5118
582
583 /*
584 * BmRequestType: 1100 0000b
585 * bRequest: FTDI_E2_READ
586 * wValue: 0
587 * wIndex: Address of word to read
588 * wLength: 2
589 * Data: Will return a word of data from E2Address
590 *
591 */
592
593 /* Port Identifier Table */
594 #define PIT_DEFAULT 0 /* SIOA */
595 #define PIT_SIOA 1 /* SIOA */
596 /* The device this driver is tested with one has only one port */
597 #define PIT_SIOB 2 /* SIOB */
598 #define PIT_PARALLEL 3 /* Parallel */
599
600 /* FTDI_SIO_RESET */
601 #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET
602 #define FTDI_SIO_RESET_REQUEST_TYPE 0x40
603 #define FTDI_SIO_RESET_SIO 0
604 #define FTDI_SIO_RESET_PURGE_RX 1
605 #define FTDI_SIO_RESET_PURGE_TX 2
606
607 /*
608 * BmRequestType: 0100 0000B
609 * bRequest: FTDI_SIO_RESET
610 * wValue: Control Value
611 * 0 = Reset SIO
612 * 1 = Purge RX buffer
613 * 2 = Purge TX buffer
614 * wIndex: Port
615 * wLength: 0
616 * Data: None
617 *
618 * The Reset SIO command has this effect:
619 *
620 * Sets flow control set to 'none'
621 * Event char = $0D
622 * Event trigger = disabled
623 * Purge RX buffer
624 * Purge TX buffer
625 * Clear DTR
626 * Clear RTS
627 * baud and data format not reset
628 *
629 * The Purge RX and TX buffer commands affect nothing except the buffers
630 *
631 */
632
633 /* FTDI_SIO_SET_BAUDRATE */
634 #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40
635 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3
636
637 /*
638 * BmRequestType: 0100 0000B
639 * bRequest: FTDI_SIO_SET_BAUDRATE
640 * wValue: BaudDivisor value - see below
641 * wIndex: Port
642 * wLength: 0
643 * Data: None
644 * The BaudDivisor values are calculated as follows:
645 * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish
646 * I knew how to detect old chips to select proper base clock!
647 * - BaudDivisor is a fixed point number encoded in a funny way.
648 * (--WRONG WAY OF THINKING--)
649 * BaudDivisor is a fixed point number encoded with following bit weighs:
650 * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
651 * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
652 * (--THE REALITY--)
653 * The both-bits-set has quite different meaning from 0.75 - the chip designers
654 * have decided it to mean 0.125 instead of 0.75.
655 * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
656 * and Flow Control Consideration for USB to RS232".
657 * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
658 * automagically re-encode the resulting value to take fractions into consideration.
659 * As all values are integers, some bit twiddling is in order:
660 * BaudDivisor = (BaseClock / 16 / BaudRate) |
661 * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5
662 * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25
663 * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125
664 * : 0)
665 *
666 * For the FT232BM, a 17th divisor bit was introduced to encode the multiples
667 * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows
668 * (the first four codes are the same as for the FT8U232AM, where bit 16 is
669 * always 0):
670 * 000 - add .000 to divisor
671 * 001 - add .500 to divisor
672 * 010 - add .250 to divisor
673 * 011 - add .125 to divisor
674 * 100 - add .375 to divisor
675 * 101 - add .625 to divisor
676 * 110 - add .750 to divisor
677 * 111 - add .875 to divisor
678 * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is
679 * placed in bit 0 of the urb index.
680 *
681 * Note that there are a couple of special cases to support the highest baud
682 * rates. If the calculated divisor value is 1, this needs to be replaced with
683 * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001
684 * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is
685 * not supported by the FT8U232AM).
686 */
687
688 typedef enum {
689 SIO = 1,
690 FT8U232AM = 2,
691 FT232BM = 3,
692 FT2232C = 4,
693 FT232RL = 5,
694 } ftdi_chip_type_t;
695
696 typedef enum {
697 ftdi_sio_b300 = 0,
698 ftdi_sio_b600 = 1,
699 ftdi_sio_b1200 = 2,
700 ftdi_sio_b2400 = 3,
701 ftdi_sio_b4800 = 4,
702 ftdi_sio_b9600 = 5,
703 ftdi_sio_b19200 = 6,
704 ftdi_sio_b38400 = 7,
705 ftdi_sio_b57600 = 8,
706 ftdi_sio_b115200 = 9
707 } FTDI_SIO_baudrate_t ;
708
709 /*
710 * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
711 * are calculated internally.
712 */
713
714 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
715 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
716 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 )
717 #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 )
718 #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 )
719 #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 )
720 #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 )
721 #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 )
722 #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 )
723 #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 )
724 #define FTDI_SIO_SET_BREAK (0x1 << 14)
725 /* FTDI_SIO_SET_DATA */
726
727 /*
728 * BmRequestType: 0100 0000B
729 * bRequest: FTDI_SIO_SET_DATA
730 * wValue: Data characteristics (see below)
731 * wIndex: Port
732 * wLength: 0
733 * Data: No
734 *
735 * Data characteristics
736 *
737 * B0..7 Number of data bits
738 * B8..10 Parity
739 * 0 = None
740 * 1 = Odd
741 * 2 = Even
742 * 3 = Mark
743 * 4 = Space
744 * B11..13 Stop Bits
745 * 0 = 1
746 * 1 = 1.5
747 * 2 = 2
748 * B14
749 * 1 = TX ON (break)
750 * 0 = TX OFF (normal state)
751 * B15 Reserved
752 *
753 */
754
755
756
757 /* FTDI_SIO_MODEM_CTRL */
758 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40
759 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL
760
761 /*
762 * BmRequestType: 0100 0000B
763 * bRequest: FTDI_SIO_MODEM_CTRL
764 * wValue: ControlValue (see below)
765 * wIndex: Port
766 * wLength: 0
767 * Data: None
768 *
769 * NOTE: If the device is in RTS/CTS flow control, the RTS set by this
770 * command will be IGNORED without an error being returned
771 * Also - you can not set DTR and RTS with one control message
772 */
773
774 #define FTDI_SIO_SET_DTR_MASK 0x1
775 #define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8))
776 #define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8))
777 #define FTDI_SIO_SET_RTS_MASK 0x2
778 #define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
779 #define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
780
781 /*
782 * ControlValue
783 * B0 DTR state
784 * 0 = reset
785 * 1 = set
786 * B1 RTS state
787 * 0 = reset
788 * 1 = set
789 * B2..7 Reserved
790 * B8 DTR state enable
791 * 0 = ignore
792 * 1 = use DTR state
793 * B9 RTS state enable
794 * 0 = ignore
795 * 1 = use RTS state
796 * B10..15 Reserved
797 */
798
799 /* FTDI_SIO_SET_FLOW_CTRL */
800 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40
801 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL
802 #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
803 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
804 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
805 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
806 /*
807 * BmRequestType: 0100 0000b
808 * bRequest: FTDI_SIO_SET_FLOW_CTRL
809 * wValue: Xoff/Xon
810 * wIndex: Protocol/Port - hIndex is protocl / lIndex is port
811 * wLength: 0
812 * Data: None
813 *
814 * hIndex protocol is:
815 * B0 Output handshaking using RTS/CTS
816 * 0 = disabled
817 * 1 = enabled
818 * B1 Output handshaking using DTR/DSR
819 * 0 = disabled
820 * 1 = enabled
821 * B2 Xon/Xoff handshaking
822 * 0 = disabled
823 * 1 = enabled
824 *
825 * A value of zero in the hIndex field disables handshaking
826 *
827 * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character
828 * and the lValue field contains the XON character.
829 */
830
831 /*
832 * FTDI_SIO_GET_LATENCY_TIMER
833 *
834 * Set the timeout interval. The FTDI collects data from the slave
835 * device, transmitting it to the host when either A) 62 bytes are
836 * received, or B) the timeout interval has elapsed and the buffer
837 * contains at least 1 byte. Setting this value to a small number
838 * can dramatically improve performance for applications which send
839 * small packets, since the default value is 16ms.
840 */
841 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER
842 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0
843
844 /*
845 * BmRequestType: 1100 0000b
846 * bRequest: FTDI_SIO_GET_LATENCY_TIMER
847 * wValue: 0
848 * wIndex: Port
849 * wLength: 0
850 * Data: latency (on return)
851 */
852
853 /*
854 * FTDI_SIO_SET_LATENCY_TIMER
855 *
856 * Set the timeout interval. The FTDI collects data from the slave
857 * device, transmitting it to the host when either A) 62 bytes are
858 * received, or B) the timeout interval has elapsed and the buffer
859 * contains at least 1 byte. Setting this value to a small number
860 * can dramatically improve performance for applications which send
861 * small packets, since the default value is 16ms.
862 */
863 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER
864 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40
865
866 /*
867 * BmRequestType: 0100 0000b
868 * bRequest: FTDI_SIO_SET_LATENCY_TIMER
869 * wValue: Latency (milliseconds)
870 * wIndex: Port
871 * wLength: 0
872 * Data: None
873 *
874 * wValue:
875 * B0..7 Latency timer
876 * B8..15 0
877 *
878 */
879
880 /*
881 * FTDI_SIO_SET_EVENT_CHAR
882 *
883 * Set the special event character for the specified communications port.
884 * If the device sees this character it will immediately return the
885 * data read so far - rather than wait 40ms or until 62 bytes are read
886 * which is what normally happens.
887 */
888
889
890 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR
891 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40
892
893
894 /*
895 * BmRequestType: 0100 0000b
896 * bRequest: FTDI_SIO_SET_EVENT_CHAR
897 * wValue: EventChar
898 * wIndex: Port
899 * wLength: 0
900 * Data: None
901 *
902 * wValue:
903 * B0..7 Event Character
904 * B8 Event Character Processing
905 * 0 = disabled
906 * 1 = enabled
907 * B9..15 Reserved
908 *
909 */
910
911 /* FTDI_SIO_SET_ERROR_CHAR */
912
913 /* Set the parity error replacement character for the specified communications port */
914
915 /*
916 * BmRequestType: 0100 0000b
917 * bRequest: FTDI_SIO_SET_EVENT_CHAR
918 * wValue: Error Char
919 * wIndex: Port
920 * wLength: 0
921 * Data: None
922 *
923 *Error Char
924 * B0..7 Error Character
925 * B8 Error Character Processing
926 * 0 = disabled
927 * 1 = enabled
928 * B9..15 Reserved
929 *
930 */
931
932 /* FTDI_SIO_GET_MODEM_STATUS */
933 /* Retrieve the current value of the modem status register */
934
935 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0
936 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS
937 #define FTDI_SIO_CTS_MASK 0x10
938 #define FTDI_SIO_DSR_MASK 0x20
939 #define FTDI_SIO_RI_MASK 0x40
940 #define FTDI_SIO_RLSD_MASK 0x80
941 /*
942 * BmRequestType: 1100 0000b
943 * bRequest: FTDI_SIO_GET_MODEM_STATUS
944 * wValue: zero
945 * wIndex: Port
946 * wLength: 1
947 * Data: Status
948 *
949 * One byte of data is returned
950 * B0..3 0
951 * B4 CTS
952 * 0 = inactive
953 * 1 = active
954 * B5 DSR
955 * 0 = inactive
956 * 1 = active
957 * B6 Ring Indicator (RI)
958 * 0 = inactive
959 * 1 = active
960 * B7 Receive Line Signal Detect (RLSD)
961 * 0 = inactive
962 * 1 = active
963 */
964
965
966
967 /* Descriptors returned by the device
968 *
969 * Device Descriptor
970 *
971 * Offset Field Size Value Description
972 * 0 bLength 1 0x12 Size of descriptor in bytes
973 * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type
974 * 2 bcdUSB 2 0x0110 USB Spec Release Number
975 * 4 bDeviceClass 1 0x00 Class Code
976 * 5 bDeviceSubClass 1 0x00 SubClass Code
977 * 6 bDeviceProtocol 1 0x00 Protocol Code
978 * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0
979 * 8 idVendor 2 0x0403 Vendor ID
980 * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID)
981 * 12 bcdDevice 2 0x0001 Device release number
982 * 14 iManufacturer 1 0x01 Index of man. string desc
983 * 15 iProduct 1 0x02 Index of prod string desc
984 * 16 iSerialNumber 1 0x02 Index of serial nmr string desc
985 * 17 bNumConfigurations 1 0x01 Number of possible configurations
986 *
987 * Configuration Descriptor
988 *
989 * Offset Field Size Value
990 * 0 bLength 1 0x09 Size of descriptor in bytes
991 * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type
992 * 2 wTotalLength 2 0x0020 Total length of data
993 * 4 bNumInterfaces 1 0x01 Number of interfaces supported
994 * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req
995 * 6 iConfiguration 1 0x02 Index of config string descriptor
996 * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup
997 * 8 MaxPower 1 0x1E Max power consumption
998 *
999 * Interface Descriptor
1000 *
1001 * Offset Field Size Value
1002 * 0 bLength 1 0x09 Size of descriptor in bytes
1003 * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type
1004 * 2 bInterfaceNumber 1 0x00 Number of interface
1005 * 3 bAlternateSetting 1 0x00 Value used to select alternate
1006 * 4 bNumEndpoints 1 0x02 Number of endpoints
1007 * 5 bInterfaceClass 1 0xFF Class Code
1008 * 6 bInterfaceSubClass 1 0xFF Subclass Code
1009 * 7 bInterfaceProtocol 1 0xFF Protocol Code
1010 * 8 iInterface 1 0x02 Index of interface string description
1011 *
1012 * IN Endpoint Descriptor
1013 *
1014 * Offset Field Size Value
1015 * 0 bLength 1 0x07 Size of descriptor in bytes
1016 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type
1017 * 2 bEndpointAddress 1 0x82 Address of endpoint
1018 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk
1019 * 4 bNumEndpoints 2 0x0040 maximum packet size
1020 * 5 bInterval 1 0x00 Interval for polling endpoint
1021 *
1022 * OUT Endpoint Descriptor
1023 *
1024 * Offset Field Size Value
1025 * 0 bLength 1 0x07 Size of descriptor in bytes
1026 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type
1027 * 2 bEndpointAddress 1 0x02 Address of endpoint
1028 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk
1029 * 4 bNumEndpoints 2 0x0040 maximum packet size
1030 * 5 bInterval 1 0x00 Interval for polling endpoint
1031 *
1032 * DATA FORMAT
1033 *
1034 * IN Endpoint
1035 *
1036 * The device reserves the first two bytes of data on this endpoint to contain the current
1037 * values of the modem and line status registers. In the absence of data, the device
1038 * generates a message consisting of these two status bytes every 40 ms
1039 *
1040 * Byte 0: Modem Status
1041 *
1042 * Offset Description
1043 * B0 Reserved - must be 1
1044 * B1 Reserved - must be 0
1045 * B2 Reserved - must be 0
1046 * B3 Reserved - must be 0
1047 * B4 Clear to Send (CTS)
1048 * B5 Data Set Ready (DSR)
1049 * B6 Ring Indicator (RI)
1050 * B7 Receive Line Signal Detect (RLSD)
1051 *
1052 * Byte 1: Line Status
1053 *
1054 * Offset Description
1055 * B0 Data Ready (DR)
1056 * B1 Overrun Error (OE)
1057 * B2 Parity Error (PE)
1058 * B3 Framing Error (FE)
1059 * B4 Break Interrupt (BI)
1060 * B5 Transmitter Holding Register (THRE)
1061 * B6 Transmitter Empty (TEMT)
1062 * B7 Error in RCVR FIFO
1063 *
1064 */
1065 #define FTDI_RS0_CTS (1 << 4)
1066 #define FTDI_RS0_DSR (1 << 5)
1067 #define FTDI_RS0_RI (1 << 6)
1068 #define FTDI_RS0_RLSD (1 << 7)
1069
1070 #define FTDI_RS_DR 1
1071 #define FTDI_RS_OE (1<<1)
1072 #define FTDI_RS_PE (1<<2)
1073 #define FTDI_RS_FE (1<<3)
1074 #define FTDI_RS_BI (1<<4)
1075 #define FTDI_RS_THRE (1<<5)
1076 #define FTDI_RS_TEMT (1<<6)
1077 #define FTDI_RS_FIFO (1<<7)
1078
1079 /*
1080 * OUT Endpoint
1081 *
1082 * This device reserves the first bytes of data on this endpoint contain the length
1083 * and port identifier of the message. For the FTDI USB Serial converter the port
1084 * identifier is always 1.
1085 *
1086 * Byte 0: Line Status
1087 *
1088 * Offset Description
1089 * B0 Reserved - must be 1
1090 * B1 Reserved - must be 0
1091 * B2..7 Length of message - (not including Byte 0)
1092 *
1093 */
1094
1095
|
This page was automatically generated by the
LXR engine.
|