Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * OHCI HCD (Host Controller Driver) for USB.
  3  *
  4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
  6  * (C) Copyright 2002 Hewlett-Packard Company
  7  * (C) Copyright 2006 Sylvain Munaut <tnt@246tNt.com>
  8  *
  9  * Bus glue for OHCI HC on the of_platform bus
 10  *
 11  * Modified for of_platform bus from ohci-sa1111.c
 12  *
 13  * This file is licenced under the GPL.
 14  */
 15 
 16 #include <linux/signal.h>
 17 #include <linux/of_platform.h>
 18 
 19 #include <asm/prom.h>
 20 
 21 
 22 static int __devinit
 23 ohci_ppc_of_start(struct usb_hcd *hcd)
 24 {
 25         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 26         int             ret;
 27 
 28         if ((ret = ohci_init(ohci)) < 0)
 29                 return ret;
 30 
 31         if ((ret = ohci_run(ohci)) < 0) {
 32                 err("can't start %s", ohci_to_hcd(ohci)->self.bus_name);
 33                 ohci_stop(hcd);
 34                 return ret;
 35         }
 36 
 37         return 0;
 38 }
 39 
 40 static const struct hc_driver ohci_ppc_of_hc_driver = {
 41         .description =          hcd_name,
 42         .product_desc =         "OF OHCI",
 43         .hcd_priv_size =        sizeof(struct ohci_hcd),
 44 
 45         /*
 46          * generic hardware linkage
 47          */
 48         .irq =                  ohci_irq,
 49         .flags =                HCD_USB11 | HCD_MEMORY,
 50 
 51         /*
 52          * basic lifecycle operations
 53          */
 54         .start =                ohci_ppc_of_start,
 55         .stop =                 ohci_stop,
 56         .shutdown =             ohci_shutdown,
 57 
 58         /*
 59          * managing i/o requests and associated device resources
 60          */
 61         .urb_enqueue =          ohci_urb_enqueue,
 62         .urb_dequeue =          ohci_urb_dequeue,
 63         .endpoint_disable =     ohci_endpoint_disable,
 64 
 65         /*
 66          * scheduling support
 67          */
 68         .get_frame_number =     ohci_get_frame,
 69 
 70         /*
 71          * root hub support
 72          */
 73         .hub_status_data =      ohci_hub_status_data,
 74         .hub_control =          ohci_hub_control,
 75 #ifdef  CONFIG_PM
 76         .bus_suspend =          ohci_bus_suspend,
 77         .bus_resume =           ohci_bus_resume,
 78 #endif
 79         .start_port_reset =     ohci_start_port_reset,
 80 };
 81 
 82 
 83 static int __devinit
 84 ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
 85 {
 86         struct device_node *dn = op->node;
 87         struct usb_hcd *hcd;
 88         struct ohci_hcd *ohci;
 89         struct resource res;
 90         int irq;
 91 
 92         int rv;
 93         int is_bigendian;
 94         struct device_node *np;
 95 
 96         if (usb_disabled())
 97                 return -ENODEV;
 98 
 99         is_bigendian =
100                 of_device_is_compatible(dn, "ohci-bigendian") ||
101                 of_device_is_compatible(dn, "ohci-be");
102 
103         dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
104 
105         rv = of_address_to_resource(dn, 0, &res);
106         if (rv)
107                 return rv;
108 
109         hcd = usb_create_hcd(&ohci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
110         if (!hcd)
111                 return -ENOMEM;
112 
113         hcd->rsrc_start = res.start;
114         hcd->rsrc_len = res.end - res.start + 1;
115 
116         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
117                 printk(KERN_ERR __FILE__ ": request_mem_region failed\n");
118                 rv = -EBUSY;
119                 goto err_rmr;
120         }
121 
122         irq = irq_of_parse_and_map(dn, 0);
123         if (irq == NO_IRQ) {
124                 printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n");
125                 rv = -EBUSY;
126                 goto err_irq;
127         }
128 
129         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
130         if (!hcd->regs) {
131                 printk(KERN_ERR __FILE__ ": ioremap failed\n");
132                 rv = -ENOMEM;
133                 goto err_ioremap;
134         }
135 
136         ohci = hcd_to_ohci(hcd);
137         if (is_bigendian) {
138                 ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
139                 if (of_device_is_compatible(dn, "fsl,mpc5200-ohci"))
140                         ohci->flags |= OHCI_QUIRK_FRAME_NO;
141                 if (of_device_is_compatible(dn, "mpc5200-ohci"))
142                         ohci->flags |= OHCI_QUIRK_FRAME_NO;
143         }
144 
145         ohci_hcd_init(ohci);
146 
147         rv = usb_add_hcd(hcd, irq, IRQF_DISABLED);
148         if (rv == 0)
149                 return 0;
150 
151         /* by now, 440epx is known to show usb_23 erratum */
152         np = of_find_compatible_node(NULL, NULL, "ibm,usb-ehci-440epx");
153 
154         /* Work around - At this point ohci_run has executed, the
155         * controller is running, everything, the root ports, etc., is
156         * set up.  If the ehci driver is loaded, put the ohci core in
157         * the suspended state.  The ehci driver will bring it out of
158         * suspended state when / if a non-high speed USB device is
159         * attached to the USB Host port.  If the ehci driver is not
160         * loaded, do nothing. request_mem_region is used to test if
161         * the ehci driver is loaded.
162         */
163         if (np !=  NULL) {
164                 if (!of_address_to_resource(np, 0, &res)) {
165                         if (!request_mem_region(res.start, 0x4, hcd_name)) {
166                                 writel_be((readl_be(&ohci->regs->control) |
167                                         OHCI_USB_SUSPEND), &ohci->regs->control);
168                                         (void) readl_be(&ohci->regs->control);
169                         } else
170                                 release_mem_region(res.start, 0x4);
171                 } else
172                     pr_debug(__FILE__ ": cannot get ehci offset from fdt\n");
173         }
174 
175         iounmap(hcd->regs);
176 err_ioremap:
177         irq_dispose_mapping(irq);
178 err_irq:
179         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
180 err_rmr:
181         usb_put_hcd(hcd);
182 
183         return rv;
184 }
185 
186 static int ohci_hcd_ppc_of_remove(struct of_device *op)
187 {
188         struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
189         dev_set_drvdata(&op->dev, NULL);
190 
191         dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
192 
193         usb_remove_hcd(hcd);
194 
195         iounmap(hcd->regs);
196         irq_dispose_mapping(hcd->irq);
197         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
198 
199         usb_put_hcd(hcd);
200 
201         return 0;
202 }
203 
204 static int ohci_hcd_ppc_of_shutdown(struct of_device *op)
205 {
206         struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
207 
208         if (hcd->driver->shutdown)
209                 hcd->driver->shutdown(hcd);
210 
211         return 0;
212 }
213 
214 
215 static struct of_device_id ohci_hcd_ppc_of_match[] = {
216 #ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE
217         {
218                 .name = "usb",
219                 .compatible = "ohci-bigendian",
220         },
221         {
222                 .name = "usb",
223                 .compatible = "ohci-be",
224         },
225 #endif
226 #ifdef CONFIG_USB_OHCI_HCD_PPC_OF_LE
227         {
228                 .name = "usb",
229                 .compatible = "ohci-littledian",
230         },
231         {
232                 .name = "usb",
233                 .compatible = "ohci-le",
234         },
235 #endif
236         {},
237 };
238 MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match);
239 
240 #if     !defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \
241         !defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE)
242 #error "No endianess selected for ppc-of-ohci"
243 #endif
244 
245 
246 static struct of_platform_driver ohci_hcd_ppc_of_driver = {
247         .name           = "ppc-of-ohci",
248         .match_table    = ohci_hcd_ppc_of_match,
249         .probe          = ohci_hcd_ppc_of_probe,
250         .remove         = ohci_hcd_ppc_of_remove,
251         .shutdown       = ohci_hcd_ppc_of_shutdown,
252 #ifdef CONFIG_PM
253         /*.suspend      = ohci_hcd_ppc_soc_drv_suspend,*/
254         /*.resume       = ohci_hcd_ppc_soc_drv_resume,*/
255 #endif
256         .driver         = {
257                 .name   = "ppc-of-ohci",
258                 .owner  = THIS_MODULE,
259         },
260 };
261 
262 
  This page was automatically generated by the LXR engine.