Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * OHCI HCD (Host Controller Driver) for USB.
  3  *
  4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
  6  * (C) Copyright 2002 Hewlett-Packard Company
  7  * (C) Copyright 2005 Embedded Alley Solutions, Inc.
  8  *
  9  * Bus Glue for PNX8550
 10  *
 11  * Written by Christopher Hoover <ch@hpl.hp.com>
 12  * Based on fragments of previous driver by Russell King et al.
 13  *
 14  * Modified for LH7A404 from ohci-sa1111.c
 15  *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
 16  *
 17  * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c
 18  *  by Vitaly Wool <vitalywool@gmail.com>
 19  *
 20  * This file is licenced under the GPL.
 21  */
 22 
 23 #include <linux/device.h>
 24 #include <linux/platform_device.h>
 25 #include <asm/mach-pnx8550/usb.h>
 26 #include <asm/mach-pnx8550/int.h>
 27 #include <asm/mach-pnx8550/pci.h>
 28 
 29 #ifndef CONFIG_PNX8550
 30 #error "This file is PNX8550 bus glue.  CONFIG_PNX8550 must be defined."
 31 #endif
 32 
 33 extern int usb_disabled(void);
 34 
 35 /*-------------------------------------------------------------------------*/
 36 
 37 static void pnx8550_start_hc(struct platform_device *dev)
 38 {
 39         /*
 40          * Set register CLK48CTL to enable and 48MHz
 41          */
 42         outl(0x00000003, PCI_BASE | 0x0004770c);
 43 
 44         /*
 45          * Set register CLK12CTL to enable and 48MHz
 46          */
 47         outl(0x00000003, PCI_BASE | 0x00047710);
 48 
 49         udelay(100);
 50 }
 51 
 52 static void pnx8550_stop_hc(struct platform_device *dev)
 53 {
 54         udelay(10);
 55 }
 56 
 57 
 58 /*-------------------------------------------------------------------------*/
 59 
 60 /* configure so an HC device and id are always provided */
 61 /* always called with process context; sleeping is OK */
 62 
 63 
 64 /**
 65  * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs
 66  * Context: !in_interrupt()
 67  *
 68  * Allocates basic resources for this USB host controller, and
 69  * then invokes the start() method for the HCD associated with it
 70  * through the hotplug entry's driver_data.
 71  *
 72  */
 73 int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
 74                           struct platform_device *dev)
 75 {
 76         int retval;
 77         struct usb_hcd *hcd;
 78 
 79         if (dev->resource[0].flags != IORESOURCE_MEM ||
 80                         dev->resource[1].flags != IORESOURCE_IRQ) {
 81                 dev_err (&dev->dev,"invalid resource type\n");
 82                 return -ENOMEM;
 83         }
 84 
 85         hcd = usb_create_hcd (driver, &dev->dev, "pnx8550");
 86         if (!hcd)
 87                 return -ENOMEM;
 88         hcd->rsrc_start = dev->resource[0].start;
 89         hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
 90 
 91         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 92                 dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] "
 93                                 "failed\n", hcd->rsrc_start, hcd->rsrc_len);
 94                 retval = -EBUSY;
 95                 goto err1;
 96         }
 97 
 98         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 99         if (!hcd->regs) {
100                 dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n",
101                                 hcd->rsrc_start, hcd->rsrc_len);
102                 retval = -ENOMEM;
103                 goto err2;
104         }
105 
106         pnx8550_start_hc(dev);
107 
108         ohci_hcd_init(hcd_to_ohci(hcd));
109 
110         retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
111         if (retval == 0)
112                 return retval;
113 
114         pnx8550_stop_hc(dev);
115         iounmap(hcd->regs);
116  err2:
117         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
118  err1:
119         usb_put_hcd(hcd);
120         return retval;
121 }
122 
123 
124 /* may be called without controller electrically present */
125 /* may be called with controller, bus, and devices active */
126 
127 /**
128  * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs
129  * @dev: USB Host Controller being removed
130  * Context: !in_interrupt()
131  *
132  * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking
133  * the HCD's stop() method.  It is always called from a thread
134  * context, normally "rmmod", "apmd", or something similar.
135  *
136  */
137 void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev)
138 {
139         usb_remove_hcd(hcd);
140         pnx8550_stop_hc(dev);
141         iounmap(hcd->regs);
142         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
143         usb_put_hcd(hcd);
144 }
145 
146 /*-------------------------------------------------------------------------*/
147 
148 static int __devinit
149 ohci_pnx8550_start (struct usb_hcd *hcd)
150 {
151         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
152         int             ret;
153 
154         ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci);
155 
156         if ((ret = ohci_init(ohci)) < 0)
157                 return ret;
158 
159         if ((ret = ohci_run (ohci)) < 0) {
160                 err ("can't start %s", hcd->self.bus_name);
161                 ohci_stop (hcd);
162                 return ret;
163         }
164 
165         return 0;
166 }
167 
168 /*-------------------------------------------------------------------------*/
169 
170 static const struct hc_driver ohci_pnx8550_hc_driver = {
171         .description =          hcd_name,
172         .product_desc =         "PNX8550 OHCI",
173         .hcd_priv_size =        sizeof(struct ohci_hcd),
174 
175         /*
176          * generic hardware linkage
177          */
178         .irq =                  ohci_irq,
179         .flags =                HCD_USB11 | HCD_MEMORY,
180 
181         /*
182          * basic lifecycle operations
183          */
184         .start =                ohci_pnx8550_start,
185         .stop =                 ohci_stop,
186 
187         /*
188          * managing i/o requests and associated device resources
189          */
190         .urb_enqueue =          ohci_urb_enqueue,
191         .urb_dequeue =          ohci_urb_dequeue,
192         .endpoint_disable =     ohci_endpoint_disable,
193 
194         /*
195          * scheduling support
196          */
197         .get_frame_number =     ohci_get_frame,
198 
199         /*
200          * root hub support
201          */
202         .hub_status_data =      ohci_hub_status_data,
203         .hub_control =          ohci_hub_control,
204         .hub_irq_enable =       ohci_rhsc_enable,
205 #ifdef  CONFIG_PM
206         .bus_suspend =          ohci_bus_suspend,
207         .bus_resume =           ohci_bus_resume,
208 #endif
209         .start_port_reset =     ohci_start_port_reset,
210 };
211 
212 /*-------------------------------------------------------------------------*/
213 
214 static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev)
215 {
216         int ret;
217 
218         if (usb_disabled())
219                 return -ENODEV;
220 
221         ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev);
222         return ret;
223 }
224 
225 static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev)
226 {
227         struct usb_hcd *hcd = platform_get_drvdata(pdev);
228 
229         usb_hcd_pnx8550_remove(hcd, pdev);
230         return 0;
231 }
232 
233 MODULE_ALIAS("platform:pnx8550-ohci");
234 
235 static struct platform_driver ohci_hcd_pnx8550_driver = {
236         .driver = {
237                 .name   = "pnx8550-ohci",
238                 .owner  = THIS_MODULE,
239         },
240         .probe          = ohci_hcd_pnx8550_drv_probe,
241         .remove         = ohci_hcd_pnx8550_drv_remove,
242 };
243 
244 
  This page was automatically generated by the LXR engine.