Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  *  linux/drivers/serial/cpm_uart.h
  3  *
  4  *  Driver for CPM (SCC/SMC) serial ports
  5  *
  6  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  7  *
  8  *  2006 (c) MontaVista Software, Inc.
  9  *      Vitaly Bordug <vbordug@ru.mvista.com>
 10  *
 11  * This file is licensed under the terms of the GNU General Public License
 12  * version 2. This program is licensed "as is" without any warranty of any
 13  * kind, whether express or implied.
 14  *
 15  */
 16 #ifndef CPM_UART_H
 17 #define CPM_UART_H
 18 
 19 #include <linux/platform_device.h>
 20 #include <linux/fs_uart_pd.h>
 21 
 22 #if defined(CONFIG_CPM2)
 23 #include "cpm_uart_cpm2.h"
 24 #elif defined(CONFIG_8xx)
 25 #include "cpm_uart_cpm1.h"
 26 #endif
 27 
 28 #define SERIAL_CPM_MAJOR        204
 29 #define SERIAL_CPM_MINOR        46
 30 
 31 #define IS_SMC(pinfo)           (pinfo->flags & FLAG_SMC)
 32 #define IS_DISCARDING(pinfo)    (pinfo->flags & FLAG_DISCARDING)
 33 #define FLAG_DISCARDING 0x00000004      /* when set, don't discard */
 34 #define FLAG_SMC        0x00000002
 35 #define FLAG_CONSOLE    0x00000001
 36 
 37 #define UART_SMC1       fsid_smc1_uart
 38 #define UART_SMC2       fsid_smc2_uart
 39 #define UART_SCC1       fsid_scc1_uart
 40 #define UART_SCC2       fsid_scc2_uart
 41 #define UART_SCC3       fsid_scc3_uart
 42 #define UART_SCC4       fsid_scc4_uart
 43 
 44 #define UART_NR         fs_uart_nr
 45 
 46 #define RX_NUM_FIFO     4
 47 #define RX_BUF_SIZE     32
 48 #define TX_NUM_FIFO     4
 49 #define TX_BUF_SIZE     32
 50 
 51 #define SCC_WAIT_CLOSING 100
 52 
 53 #define GPIO_CTS        0
 54 #define GPIO_RTS        1
 55 #define GPIO_DCD        2
 56 #define GPIO_DSR        3
 57 #define GPIO_DTR        4
 58 #define GPIO_RI         5
 59 
 60 #define NUM_GPIOS       (GPIO_RI+1)
 61 
 62 struct uart_cpm_port {
 63         struct uart_port        port;
 64         u16                     rx_nrfifos;
 65         u16                     rx_fifosize;
 66         u16                     tx_nrfifos;
 67         u16                     tx_fifosize;
 68         smc_t __iomem           *smcp;
 69         smc_uart_t __iomem      *smcup;
 70         scc_t __iomem           *sccp;
 71         scc_uart_t __iomem      *sccup;
 72         cbd_t __iomem           *rx_bd_base;
 73         cbd_t __iomem           *rx_cur;
 74         cbd_t __iomem           *tx_bd_base;
 75         cbd_t __iomem           *tx_cur;
 76         unsigned char           *tx_buf;
 77         unsigned char           *rx_buf;
 78         u32                     flags;
 79         void                    (*set_lineif)(struct uart_cpm_port *);
 80         struct clk              *clk;
 81         u8                      brg;
 82         uint                     dp_addr;
 83         void                    *mem_addr;
 84         dma_addr_t               dma_addr;
 85         u32                     mem_size;
 86         /* helpers */
 87         int                      baud;
 88         int                      bits;
 89         /* Keep track of 'odd' SMC2 wirings */
 90         int                     is_portb;
 91         /* wait on close if needed */
 92         int                     wait_closing;
 93         /* value to combine with opcode to form cpm command */
 94         u32                     command;
 95         int                     gpios[NUM_GPIOS];
 96 };
 97 
 98 extern int cpm_uart_nr;
 99 extern struct uart_cpm_port cpm_uart_ports[UART_NR];
100 
101 /* these are located in their respective files */
102 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
103 void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
104                                 struct device_node *np);
105 void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram);
106 int cpm_uart_init_portdesc(void);
107 int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
108 void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
109 
110 void smc1_lineif(struct uart_cpm_port *pinfo);
111 void smc2_lineif(struct uart_cpm_port *pinfo);
112 void scc1_lineif(struct uart_cpm_port *pinfo);
113 void scc2_lineif(struct uart_cpm_port *pinfo);
114 void scc3_lineif(struct uart_cpm_port *pinfo);
115 void scc4_lineif(struct uart_cpm_port *pinfo);
116 
117 /*
118    virtual to phys transtalion
119 */
120 static inline unsigned long cpu2cpm_addr(void *addr,
121                                          struct uart_cpm_port *pinfo)
122 {
123         int offset;
124         u32 val = (u32)addr;
125         u32 mem = (u32)pinfo->mem_addr;
126         /* sane check */
127         if (likely(val >= mem && val < mem + pinfo->mem_size)) {
128                 offset = val - mem;
129                 return pinfo->dma_addr + offset;
130         }
131         /* something nasty happened */
132         BUG();
133         return 0;
134 }
135 
136 static inline void *cpm2cpu_addr(unsigned long addr,
137                                  struct uart_cpm_port *pinfo)
138 {
139         int offset;
140         u32 val = addr;
141         u32 dma = (u32)pinfo->dma_addr;
142         /* sane check */
143         if (likely(val >= dma && val < dma + pinfo->mem_size)) {
144                 offset = val - dma;
145                 return pinfo->mem_addr + offset;
146         }
147         /* something nasty happened */
148         BUG();
149         return NULL;
150 }
151 
152 
153 #endif /* CPM_UART_H */
154 
  This page was automatically generated by the LXR engine.