1 /*
2 *
3 * Linux MegaRAID device driver
4 *
5 * Copyright (c) 2002 LSI Logic Corporation.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 *
12 * Copyright (c) 2002 Red Hat, Inc. All rights reserved.
13 * - fixes
14 * - speed-ups (list handling fixes, issued_list, optimizations.)
15 * - lots of cleanups.
16 *
17 * Copyright (c) 2003 Christoph Hellwig <hch@lst.de>
18 * - new-style, hotplug-aware pci probing and scsi registration
19 *
20 * Version : v2.00.4 Mon Nov 14 14:02:43 EST 2005 - Seokmann Ju
21 * <Seokmann.Ju@lsil.com>
22 *
23 * Description: Linux device driver for LSI Logic MegaRAID controller
24 *
25 * Supported controllers: MegaRAID 418, 428, 438, 466, 762, 467, 471, 490, 493
26 * 518, 520, 531, 532
27 *
28 * This driver is supported by LSI Logic, with assistance from Red Hat, Dell,
29 * and others. Please send updates to the mailing list
30 * linux-scsi@vger.kernel.org .
31 *
32 */
33
34 #include <linux/mm.h>
35 #include <linux/fs.h>
36 #include <linux/blkdev.h>
37 #include <asm/uaccess.h>
38 #include <asm/io.h>
39 #include <linux/completion.h>
40 #include <linux/delay.h>
41 #include <linux/proc_fs.h>
42 #include <linux/reboot.h>
43 #include <linux/module.h>
44 #include <linux/list.h>
45 #include <linux/interrupt.h>
46 #include <linux/pci.h>
47 #include <linux/init.h>
48 #include <linux/dma-mapping.h>
49 #include <linux/smp_lock.h>
50 #include <scsi/scsicam.h>
51
52 #include "scsi.h"
53 #include <scsi/scsi_host.h>
54
55 #include "megaraid.h"
56
57 #define MEGARAID_MODULE_VERSION "2.00.4"
58
59 MODULE_AUTHOR ("sju@lsil.com");
60 MODULE_DESCRIPTION ("LSI Logic MegaRAID legacy driver");
61 MODULE_LICENSE ("GPL");
62 MODULE_VERSION(MEGARAID_MODULE_VERSION);
63
64 static unsigned int max_cmd_per_lun = DEF_CMD_PER_LUN;
65 module_param(max_cmd_per_lun, uint, 0);
66 MODULE_PARM_DESC(max_cmd_per_lun, "Maximum number of commands which can be issued to a single LUN (default=DEF_CMD_PER_LUN=63)");
67
68 static unsigned short int max_sectors_per_io = MAX_SECTORS_PER_IO;
69 module_param(max_sectors_per_io, ushort, 0);
70 MODULE_PARM_DESC(max_sectors_per_io, "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
71
72
73 static unsigned short int max_mbox_busy_wait = MBOX_BUSY_WAIT;
74 module_param(max_mbox_busy_wait, ushort, 0);
75 MODULE_PARM_DESC(max_mbox_busy_wait, "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
76
77 #define RDINDOOR(adapter) readl((adapter)->mmio_base + 0x20)
78 #define RDOUTDOOR(adapter) readl((adapter)->mmio_base + 0x2C)
79 #define WRINDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x20)
80 #define WROUTDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x2C)
81
82 /*
83 * Global variables
84 */
85
86 static int hba_count;
87 static adapter_t *hba_soft_state[MAX_CONTROLLERS];
88 static struct proc_dir_entry *mega_proc_dir_entry;
89
90 /* For controller re-ordering */
91 static struct mega_hbas mega_hbas[MAX_CONTROLLERS];
92
93 /*
94 * The File Operations structure for the serial/ioctl interface of the driver
95 */
96 static const struct file_operations megadev_fops = {
97 .owner = THIS_MODULE,
98 .ioctl = megadev_ioctl,
99 .open = megadev_open,
100 };
101
102 /*
103 * Array to structures for storing the information about the controllers. This
104 * information is sent to the user level applications, when they do an ioctl
105 * for this information.
106 */
107 static struct mcontroller mcontroller[MAX_CONTROLLERS];
108
109 /* The current driver version */
110 static u32 driver_ver = 0x02000000;
111
112 /* major number used by the device for character interface */
113 static int major;
114
115 #define IS_RAID_CH(hba, ch) (((hba)->mega_ch_class >> (ch)) & 0x01)
116
117
118 /*
119 * Debug variable to print some diagnostic messages
120 */
121 static int trace_level;
122
123 /**
124 * mega_setup_mailbox()
125 * @adapter - pointer to our soft state
126 *
127 * Allocates a 8 byte aligned memory for the handshake mailbox.
128 */
129 static int
130 mega_setup_mailbox(adapter_t *adapter)
131 {
132 unsigned long align;
133
134 adapter->una_mbox64 = pci_alloc_consistent(adapter->dev,
135 sizeof(mbox64_t), &adapter->una_mbox64_dma);
136
137 if( !adapter->una_mbox64 ) return -1;
138
139 adapter->mbox = &adapter->una_mbox64->mbox;
140
141 adapter->mbox = (mbox_t *)((((unsigned long) adapter->mbox) + 15) &
142 (~0UL ^ 0xFUL));
143
144 adapter->mbox64 = (mbox64_t *)(((unsigned long)adapter->mbox) - 8);
145
146 align = ((void *)adapter->mbox) - ((void *)&adapter->una_mbox64->mbox);
147
148 adapter->mbox_dma = adapter->una_mbox64_dma + 8 + align;
149
150 /*
151 * Register the mailbox if the controller is an io-mapped controller
152 */
153 if( adapter->flag & BOARD_IOMAP ) {
154
155 outb(adapter->mbox_dma & 0xFF,
156 adapter->host->io_port + MBOX_PORT0);
157
158 outb((adapter->mbox_dma >> 8) & 0xFF,
159 adapter->host->io_port + MBOX_PORT1);
160
161 outb((adapter->mbox_dma >> 16) & 0xFF,
162 adapter->host->io_port + MBOX_PORT2);
163
164 outb((adapter->mbox_dma >> 24) & 0xFF,
165 adapter->host->io_port + MBOX_PORT3);
166
167 outb(ENABLE_MBOX_BYTE,
168 adapter->host->io_port + ENABLE_MBOX_REGION);
169
170 irq_ack(adapter);
171
172 irq_enable(adapter);
173 }
174
175 return 0;
176 }
177
178
179 /*
180 * mega_query_adapter()
181 * @adapter - pointer to our soft state
182 *
183 * Issue the adapter inquiry commands to the controller and find out
184 * information and parameter about the devices attached
185 */
186 static int
187 mega_query_adapter(adapter_t *adapter)
188 {
189 dma_addr_t prod_info_dma_handle;
190 mega_inquiry3 *inquiry3;
191 u8 raw_mbox[sizeof(struct mbox_out)];
192 mbox_t *mbox;
193 int retval;
194
195 /* Initialize adapter inquiry mailbox */
196
197 mbox = (mbox_t *)raw_mbox;
198
199 memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
200 memset(&mbox->m_out, 0, sizeof(raw_mbox));
201
202 /*
203 * Try to issue Inquiry3 command
204 * if not succeeded, then issue MEGA_MBOXCMD_ADAPTERINQ command and
205 * update enquiry3 structure
206 */
207 mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
208
209 inquiry3 = (mega_inquiry3 *)adapter->mega_buffer;
210
211 raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
212 raw_mbox[2] = NC_SUBOP_ENQUIRY3; /* i.e. 0x0F */
213 raw_mbox[3] = ENQ3_GET_SOLICITED_FULL; /* i.e. 0x02 */
214
215 /* Issue a blocking command to the card */
216 if ((retval = issue_scb_block(adapter, raw_mbox))) {
217 /* the adapter does not support 40ld */
218
219 mraid_ext_inquiry *ext_inq;
220 mraid_inquiry *inq;
221 dma_addr_t dma_handle;
222
223 ext_inq = pci_alloc_consistent(adapter->dev,
224 sizeof(mraid_ext_inquiry), &dma_handle);
225
226 if( ext_inq == NULL ) return -1;
227
228 inq = &ext_inq->raid_inq;
229
230 mbox->m_out.xferaddr = (u32)dma_handle;
231
232 /*issue old 0x04 command to adapter */
233 mbox->m_out.cmd = MEGA_MBOXCMD_ADPEXTINQ;
234
235 issue_scb_block(adapter, raw_mbox);
236
237 /*
238 * update Enquiry3 and ProductInfo structures with
239 * mraid_inquiry structure
240 */
241 mega_8_to_40ld(inq, inquiry3,
242 (mega_product_info *)&adapter->product_info);
243
244 pci_free_consistent(adapter->dev, sizeof(mraid_ext_inquiry),
245 ext_inq, dma_handle);
246
247 } else { /*adapter supports 40ld */
248 adapter->flag |= BOARD_40LD;
249
250 /*
251 * get product_info, which is static information and will be
252 * unchanged
253 */
254 prod_info_dma_handle = pci_map_single(adapter->dev, (void *)
255 &adapter->product_info,
256 sizeof(mega_product_info), PCI_DMA_FROMDEVICE);
257
258 mbox->m_out.xferaddr = prod_info_dma_handle;
259
260 raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
261 raw_mbox[2] = NC_SUBOP_PRODUCT_INFO; /* i.e. 0x0E */
262
263 if ((retval = issue_scb_block(adapter, raw_mbox)))
264 printk(KERN_WARNING
265 "megaraid: Product_info cmd failed with error: %d\n",
266 retval);
267
268 pci_unmap_single(adapter->dev, prod_info_dma_handle,
269 sizeof(mega_product_info), PCI_DMA_FROMDEVICE);
270 }
271
272
273 /*
274 * kernel scans the channels from 0 to <= max_channel
275 */
276 adapter->host->max_channel =
277 adapter->product_info.nchannels + NVIRT_CHAN -1;
278
279 adapter->host->max_id = 16; /* max targets per channel */
280
281 adapter->host->max_lun = 7; /* Upto 7 luns for non disk devices */
282
283 adapter->host->cmd_per_lun = max_cmd_per_lun;
284
285 adapter->numldrv = inquiry3->num_ldrv;
286
287 adapter->max_cmds = adapter->product_info.max_commands;
288
289 if(adapter->max_cmds > MAX_COMMANDS)
290 adapter->max_cmds = MAX_COMMANDS;
291
292 adapter->host->can_queue = adapter->max_cmds - 1;
293
294 /*
295 * Get the maximum number of scatter-gather elements supported by this
296 * firmware
297 */
298 mega_get_max_sgl(adapter);
299
300 adapter->host->sg_tablesize = adapter->sglen;
301
302
303 /* use HP firmware and bios version encoding */
304 if (adapter->product_info.subsysvid == HP_SUBSYS_VID) {
305 sprintf (adapter->fw_version, "%c%d%d.%d%d",
306 adapter->product_info.fw_version[2],
307 adapter->product_info.fw_version[1] >> 8,
308 adapter->product_info.fw_version[1] & 0x0f,
309 adapter->product_info.fw_version[0] >> 8,
310 adapter->product_info.fw_version[0] & 0x0f);
311 sprintf (adapter->bios_version, "%c%d%d.%d%d",
312 adapter->product_info.bios_version[2],
313 adapter->product_info.bios_version[1] >> 8,
314 adapter->product_info.bios_version[1] & 0x0f,
315 adapter->product_info.bios_version[0] >> 8,
316 adapter->product_info.bios_version[0] & 0x0f);
317 } else {
318 memcpy(adapter->fw_version,
319 (char *)adapter->product_info.fw_version, 4);
320 adapter->fw_version[4] = 0;
321
322 memcpy(adapter->bios_version,
323 (char *)adapter->product_info.bios_version, 4);
324
325 adapter->bios_version[4] = 0;
326 }
327
328 printk(KERN_NOTICE "megaraid: [%s:%s] detected %d logical drives.\n",
329 adapter->fw_version, adapter->bios_version, adapter->numldrv);
330
331 /*
332 * Do we support extended (>10 bytes) cdbs
333 */
334 adapter->support_ext_cdb = mega_support_ext_cdb(adapter);
335 if (adapter->support_ext_cdb)
336 printk(KERN_NOTICE "megaraid: supports extended CDBs.\n");
337
338
339 return 0;
340 }
341
342 /**
343 * mega_runpendq()
344 * @adapter - pointer to our soft state
345 *
346 * Runs through the list of pending requests.
347 */
348 static inline void
349 mega_runpendq(adapter_t *adapter)
350 {
351 if(!list_empty(&adapter->pending_list))
352 __mega_runpendq(adapter);
353 }
354
355 /*
356 * megaraid_queue()
357 * @scmd - Issue this scsi command
358 * @done - the callback hook into the scsi mid-layer
359 *
360 * The command queuing entry point for the mid-layer.
361 */
362 static int
363 megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
364 {
365 adapter_t *adapter;
366 scb_t *scb;
367 int busy=0;
368 unsigned long flags;
369
370 adapter = (adapter_t *)scmd->device->host->hostdata;
371
372 scmd->scsi_done = done;
373
374
375 /*
376 * Allocate and build a SCB request
377 * busy flag will be set if mega_build_cmd() command could not
378 * allocate scb. We will return non-zero status in that case.
379 * NOTE: scb can be null even though certain commands completed
380 * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, we would
381 * return 0 in that case.
382 */
383
384 spin_lock_irqsave(&adapter->lock, flags);
385 scb = mega_build_cmd(adapter, scmd, &busy);
386 if (!scb)
387 goto out;
388
389 scb->state |= SCB_PENDQ;
390 list_add_tail(&scb->list, &adapter->pending_list);
391
392 /*
393 * Check if the HBA is in quiescent state, e.g., during a
394 * delete logical drive opertion. If it is, don't run
395 * the pending_list.
396 */
397 if (atomic_read(&adapter->quiescent) == 0)
398 mega_runpendq(adapter);
399
400 busy = 0;
401 out:
402 spin_unlock_irqrestore(&adapter->lock, flags);
403 return busy;
404 }
405
406 /**
407 * mega_allocate_scb()
408 * @adapter - pointer to our soft state
409 * @cmd - scsi command from the mid-layer
410 *
411 * Allocate a SCB structure. This is the central structure for controller
412 * commands.
413 */
414 static inline scb_t *
415 mega_allocate_scb(adapter_t *adapter, Scsi_Cmnd *cmd)
416 {
417 struct list_head *head = &adapter->free_list;
418 scb_t *scb;
419
420 /* Unlink command from Free List */
421 if( !list_empty(head) ) {
422
423 scb = list_entry(head->next, scb_t, list);
424
425 list_del_init(head->next);
426
427 scb->state = SCB_ACTIVE;
428 scb->cmd = cmd;
429 scb->dma_type = MEGA_DMA_TYPE_NONE;
430
431 return scb;
432 }
433
434 return NULL;
435 }
436
437 /**
438 * mega_get_ldrv_num()
439 * @adapter - pointer to our soft state
440 * @cmd - scsi mid layer command
441 * @channel - channel on the controller
442 *
443 * Calculate the logical drive number based on the information in scsi command
444 * and the channel number.
445 */
446 static inline int
447 mega_get_ldrv_num(adapter_t *adapter, Scsi_Cmnd *cmd, int channel)
448 {
449 int tgt;
450 int ldrv_num;
451
452 tgt = cmd->device->id;
453
454 if ( tgt > adapter->this_id )
455 tgt--; /* we do not get inquires for initiator id */
456
457 ldrv_num = (channel * 15) + tgt;
458
459
460 /*
461 * If we have a logical drive with boot enabled, project it first
462 */
463 if( adapter->boot_ldrv_enabled ) {
464 if( ldrv_num == 0 ) {
465 ldrv_num = adapter->boot_ldrv;
466 }
467 else {
468 if( ldrv_num <= adapter->boot_ldrv ) {
469 ldrv_num--;
470 }
471 }
472 }
473
474 /*
475 * If "delete logical drive" feature is enabled on this controller.
476 * Do only if at least one delete logical drive operation was done.
477 *
478 * Also, after logical drive deletion, instead of logical drive number,
479 * the value returned should be 0x80+logical drive id.
480 *
481 * These is valid only for IO commands.
482 */
483
484 if (adapter->support_random_del && adapter->read_ldidmap )
485 switch (cmd->cmnd[0]) {
486 case READ_6: /* fall through */
487 case WRITE_6: /* fall through */
488 case READ_10: /* fall through */
489 case WRITE_10:
490 ldrv_num += 0x80;
491 }
492
493 return ldrv_num;
494 }
495
496 /**
497 * mega_build_cmd()
498 * @adapter - pointer to our soft state
499 * @cmd - Prepare using this scsi command
500 * @busy - busy flag if no resources
501 *
502 * Prepares a command and scatter gather list for the controller. This routine
503 * also finds out if the commands is intended for a logical drive or a
504 * physical device and prepares the controller command accordingly.
505 *
506 * We also re-order the logical drives and physical devices based on their
507 * boot settings.
508 */
509 static scb_t *
510 mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy)
511 {
512 mega_ext_passthru *epthru;
513 mega_passthru *pthru;
514 scb_t *scb;
515 mbox_t *mbox;
516 long seg;
517 char islogical;
518 int max_ldrv_num;
519 int channel = 0;
520 int target = 0;
521 int ldrv_num = 0; /* logical drive number */
522
523
524 /*
525 * filter the internal and ioctl commands
526 */
527 if((cmd->cmnd[0] == MEGA_INTERNAL_CMD))
528 return (scb_t *)cmd->host_scribble;
529
530 /*
531 * We know what channels our logical drives are on - mega_find_card()
532 */
533 islogical = adapter->logdrv_chan[cmd->device->channel];
534
535 /*
536 * The theory: If physical drive is chosen for boot, all the physical
537 * devices are exported before the logical drives, otherwise physical
538 * devices are pushed after logical drives, in which case - Kernel sees
539 * the physical devices on virtual channel which is obviously converted
540 * to actual channel on the HBA.
541 */
542 if( adapter->boot_pdrv_enabled ) {
543 if( islogical ) {
544 /* logical channel */
545 channel = cmd->device->channel -
546 adapter->product_info.nchannels;
547 }
548 else {
549 /* this is physical channel */
550 channel = cmd->device->channel;
551 target = cmd->device->id;
552
553 /*
554 * boot from a physical disk, that disk needs to be
555 * exposed first IF both the channels are SCSI, then
556 * booting from the second channel is not allowed.
557 */
558 if( target == 0 ) {
559 target = adapter->boot_pdrv_tgt;
560 }
561 else if( target == adapter->boot_pdrv_tgt ) {
562 target = 0;
563 }
564 }
565 }
566 else {
567 if( islogical ) {
568 /* this is the logical channel */
569 channel = cmd->device->channel;
570 }
571 else {
572 /* physical channel */
573 channel = cmd->device->channel - NVIRT_CHAN;
574 target = cmd->device->id;
575 }
576 }
577
578
579 if(islogical) {
580
581 /* have just LUN 0 for each target on virtual channels */
582 if (cmd->device->lun) {
583 cmd->result = (DID_BAD_TARGET << 16);
584 cmd->scsi_done(cmd);
585 return NULL;
586 }
587
588 ldrv_num = mega_get_ldrv_num(adapter, cmd, channel);
589
590
591 max_ldrv_num = (adapter->flag & BOARD_40LD) ?
592 MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD;
593
594 /*
595 * max_ldrv_num increases by 0x80 if some logical drive was
596 * deleted.
597 */
598 if(adapter->read_ldidmap)
599 max_ldrv_num += 0x80;
600
601 if(ldrv_num > max_ldrv_num ) {
602 cmd->result = (DID_BAD_TARGET << 16);
603 cmd->scsi_done(cmd);
604 return NULL;
605 }
606
607 }
608 else {
609 if( cmd->device->lun > 7) {
610 /*
611 * Do not support lun >7 for physically accessed
612 * devices
613 */
614 cmd->result = (DID_BAD_TARGET << 16);
615 cmd->scsi_done(cmd);
616 return NULL;
617 }
618 }
619
620 /*
621 *
622 * Logical drive commands
623 *
624 */
625 if(islogical) {
626 switch (cmd->cmnd[0]) {
627 case TEST_UNIT_READY:
628 #if MEGA_HAVE_CLUSTERING
629 /*
630 * Do we support clustering and is the support enabled
631 * If no, return success always
632 */
633 if( !adapter->has_cluster ) {
634 cmd->result = (DID_OK << 16);
635 cmd->scsi_done(cmd);
636 return NULL;
637 }
638
639 if(!(scb = mega_allocate_scb(adapter, cmd))) {
640 *busy = 1;
641 return NULL;
642 }
643
644 scb->raw_mbox[0] = MEGA_CLUSTER_CMD;
645 scb->raw_mbox[2] = MEGA_RESERVATION_STATUS;
646 scb->raw_mbox[3] = ldrv_num;
647
648 scb->dma_direction = PCI_DMA_NONE;
649
650 return scb;
651 #else
652 cmd->result = (DID_OK << 16);
653 cmd->scsi_done(cmd);
654 return NULL;
655 #endif
656
657 case MODE_SENSE: {
658 char *buf;
659 struct scatterlist *sg;
660
661 sg = scsi_sglist(cmd);
662 buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset;
663
664 memset(buf, 0, cmd->cmnd[4]);
665 kunmap_atomic(buf - sg->offset, KM_IRQ0);
666
667 cmd->result = (DID_OK << 16);
668 cmd->scsi_done(cmd);
669 return NULL;
670 }
671
672 case READ_CAPACITY:
673 case INQUIRY:
674
675 if(!(adapter->flag & (1L << cmd->device->channel))) {
676
677 printk(KERN_NOTICE
678 "scsi%d: scanning scsi channel %d ",
679 adapter->host->host_no,
680 cmd->device->channel);
681 printk("for logical drives.\n");
682
683 adapter->flag |= (1L << cmd->device->channel);
684 }
685
686 /* Allocate a SCB and initialize passthru */
687 if(!(scb = mega_allocate_scb(adapter, cmd))) {
688 *busy = 1;
689 return NULL;
690 }
691 pthru = scb->pthru;
692
693 mbox = (mbox_t *)scb->raw_mbox;
694 memset(mbox, 0, sizeof(scb->raw_mbox));
695 memset(pthru, 0, sizeof(mega_passthru));
696
697 pthru->timeout = 0;
698 pthru->ars = 1;
699 pthru->reqsenselen = 14;
700 pthru->islogical = 1;
701 pthru->logdrv = ldrv_num;
702 pthru->cdblen = cmd->cmd_len;
703 memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
704
705 if( adapter->has_64bit_addr ) {
706 mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
707 }
708 else {
709 mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
710 }
711
712 scb->dma_direction = PCI_DMA_FROMDEVICE;
713
714 pthru->numsgelements = mega_build_sglist(adapter, scb,
715 &pthru->dataxferaddr, &pthru->dataxferlen);
716
717 mbox->m_out.xferaddr = scb->pthru_dma_addr;
718
719 return scb;
720
721 case READ_6:
722 case WRITE_6:
723 case READ_10:
724 case WRITE_10:
725 case READ_12:
726 case WRITE_12:
727
728 /* Allocate a SCB and initialize mailbox */
729 if(!(scb = mega_allocate_scb(adapter, cmd))) {
730 *busy = 1;
731 return NULL;
732 }
733 mbox = (mbox_t *)scb->raw_mbox;
734
735 memset(mbox, 0, sizeof(scb->raw_mbox));
736 mbox->m_out.logdrv = ldrv_num;
737
738 /*
739 * A little hack: 2nd bit is zero for all scsi read
740 * commands and is set for all scsi write commands
741 */
742 if( adapter->has_64bit_addr ) {
743 mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
744 MEGA_MBOXCMD_LWRITE64:
745 MEGA_MBOXCMD_LREAD64 ;
746 }
747 else {
748 mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
749 MEGA_MBOXCMD_LWRITE:
750 MEGA_MBOXCMD_LREAD ;
751 }
752
753 /*
754 * 6-byte READ(0x08) or WRITE(0x0A) cdb
755 */
756 if( cmd->cmd_len == 6 ) {
757 mbox->m_out.numsectors = (u32) cmd->cmnd[4];
758 mbox->m_out.lba =
759 ((u32)cmd->cmnd[1] << 16) |
760 ((u32)cmd->cmnd[2] << 8) |
761 (u32)cmd->cmnd[3];
762
763 mbox->m_out.lba &= 0x1FFFFF;
764
765 #if MEGA_HAVE_STATS
766 /*
767 * Take modulo 0x80, since the logical drive
768 * number increases by 0x80 when a logical
769 * drive was deleted
770 */
771 if (*cmd->cmnd == READ_6) {
772 adapter->nreads[ldrv_num%0x80]++;
773 adapter->nreadblocks[ldrv_num%0x80] +=
774 mbox->m_out.numsectors;
775 } else {
776 adapter->nwrites[ldrv_num%0x80]++;
777 adapter->nwriteblocks[ldrv_num%0x80] +=
778 mbox->m_out.numsectors;
779 }
780 #endif
781 }
782
783 /*
784 * 10-byte READ(0x28) or WRITE(0x2A) cdb
785 */
786 if( cmd->cmd_len == 10 ) {
787 mbox->m_out.numsectors =
788 (u32)cmd->cmnd[8] |
789 ((u32)cmd->cmnd[7] << 8);
790 mbox->m_out.lba =
791 ((u32)cmd->cmnd[2] << 24) |
792 ((u32)cmd->cmnd[3] << 16) |
793 ((u32)cmd->cmnd[4] << 8) |
794 (u32)cmd->cmnd[5];
795
796 #if MEGA_HAVE_STATS
797 if (*cmd->cmnd == READ_10) {
798 adapter->nreads[ldrv_num%0x80]++;
799 adapter->nreadblocks[ldrv_num%0x80] +=
800 mbox->m_out.numsectors;
801 } else {
802 adapter->nwrites[ldrv_num%0x80]++;
803 adapter->nwriteblocks[ldrv_num%0x80] +=
804 mbox->m_out.numsectors;
805 }
806 #endif
807 }
808
809 /*
810 * 12-byte READ(0xA8) or WRITE(0xAA) cdb
811 */
812 if( cmd->cmd_len == 12 ) {
813 mbox->m_out.lba =
814 ((u32)cmd->cmnd[2] << 24) |
815 ((u32)cmd->cmnd[3] << 16) |
816 ((u32)cmd->cmnd[4] << 8) |
817 (u32)cmd->cmnd[5];
818
819 mbox->m_out.numsectors =
820 ((u32)cmd->cmnd[6] << 24) |
821 ((u32)cmd->cmnd[7] << 16) |
822 ((u32)cmd->cmnd[8] << 8) |
823 (u32)cmd->cmnd[9];
824
825 #if MEGA_HAVE_STATS
826 if (*cmd->cmnd == READ_12) {
827 adapter->nreads[ldrv_num%0x80]++;
828 adapter->nreadblocks[ldrv_num%0x80] +=
829 mbox->m_out.numsectors;
830 } else {
831 adapter->nwrites[ldrv_num%0x80]++;
832 adapter->nwriteblocks[ldrv_num%0x80] +=
833 mbox->m_out.numsectors;
834 }
835 #endif
836 }
837
838 /*
839 * If it is a read command
840 */
841 if( (*cmd->cmnd & 0x0F) == 0x08 ) {
842 scb->dma_direction = PCI_DMA_FROMDEVICE;
843 }
844 else {
845 scb->dma_direction = PCI_DMA_TODEVICE;
846 }
847
848 /* Calculate Scatter-Gather info */
849 mbox->m_out.numsgelements = mega_build_sglist(adapter, scb,
850 (u32 *)&mbox->m_out.xferaddr, (u32 *)&seg);
851
852 return scb;
853
854 #if MEGA_HAVE_CLUSTERING
855 case RESERVE: /* Fall through */
856 case RELEASE:
857
858 /*
859 * Do we support clustering and is the support enabled
860 */
861 if( ! adapter->has_cluster ) {
862
863 cmd->result = (DID_BAD_TARGET << 16);
864 cmd->scsi_done(cmd);
865 return NULL;
866 }
867
868 /* Allocate a SCB and initialize mailbox */
869 if(!(scb = mega_allocate_scb(adapter, cmd))) {
870 *busy = 1;
871 return NULL;
872 }
873
874 scb->raw_mbox[0] = MEGA_CLUSTER_CMD;
875 scb->raw_mbox[2] = ( *cmd->cmnd == RESERVE ) ?
876 MEGA_RESERVE_LD : MEGA_RELEASE_LD;
877
878 scb->raw_mbox[3] = ldrv_num;
879
880 scb->dma_direction = PCI_DMA_NONE;
881
882 return scb;
883 #endif
884
885 default:
886 cmd->result = (DID_BAD_TARGET << 16);
887 cmd->scsi_done(cmd);
888 return NULL;
889 }
890 }
891
892 /*
893 * Passthru drive commands
894 */
895 else {
896 /* Allocate a SCB and initialize passthru */
897 if(!(scb = mega_allocate_scb(adapter, cmd))) {
898 *busy = 1;
899 return NULL;
900 }
901
902 mbox = (mbox_t *)scb->raw_mbox;
903 memset(mbox, 0, sizeof(scb->raw_mbox));
904
905 if( adapter->support_ext_cdb ) {
906
907 epthru = mega_prepare_extpassthru(adapter, scb, cmd,
908 channel, target);
909
910 mbox->m_out.cmd = MEGA_MBOXCMD_EXTPTHRU;
911
912 mbox->m_out.xferaddr = scb->epthru_dma_addr;
913
914 }
915 else {
916
917 pthru = mega_prepare_passthru(adapter, scb, cmd,
918 channel, target);
919
920 /* Initialize mailbox */
921 if( adapter->has_64bit_addr ) {
922 mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
923 }
924 else {
925 mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
926 }
927
928 mbox->m_out.xferaddr = scb->pthru_dma_addr;
929
930 }
931 return scb;
932 }
933 return NULL;
934 }
935
936
937 /**
938 * mega_prepare_passthru()
939 * @adapter - pointer to our soft state
940 * @scb - our scsi control block
941 * @cmd - scsi command from the mid-layer
942 * @channel - actual channel on the controller
943 * @target - actual id on the controller.
944 *
945 * prepare a command for the scsi physical devices.
946 */
947 static mega_passthru *
948 mega_prepare_passthru(adapter_t *adapter, scb_t *scb, Scsi_Cmnd *cmd,
949 int channel, int target)
950 {
951 mega_passthru *pthru;
952
953 pthru = scb->pthru;
954 memset(pthru, 0, sizeof (mega_passthru));
955
956 /* 0=6sec/1=60sec/2=10min/3=3hrs */
957 pthru->timeout = 2;
958
959 pthru->ars = 1;
960 pthru->reqsenselen = 14;
961 pthru->islogical = 0;
962
963 pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
964
965 pthru->target = (adapter->flag & BOARD_40LD) ?
966 (channel << 4) | target : target;
967
968 pthru->cdblen = cmd->cmd_len;
969 pthru->logdrv = cmd->device->lun;
970
971 memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
972
973 /* Not sure about the direction */
974 scb->dma_direction = PCI_DMA_BIDIRECTIONAL;
975
976 /* Special Code for Handling READ_CAPA/ INQ using bounce buffers */
977 switch (cmd->cmnd[0]) {
978 case INQUIRY:
979 case READ_CAPACITY:
980 if(!(adapter->flag & (1L << cmd->device->channel))) {
981
982 printk(KERN_NOTICE
983 "scsi%d: scanning scsi channel %d [P%d] ",
984 adapter->host->host_no,
985 cmd->device->channel, channel);
986 printk("for physical devices.\n");
987
988 adapter->flag |= (1L << cmd->device->channel);
989 }
990 /* Fall through */
991 default:
992 pthru->numsgelements = mega_build_sglist(adapter, scb,
993 &pthru->dataxferaddr, &pthru->dataxferlen);
994 break;
995 }
996 return pthru;
997 }
998
999
1000 /**
1001 * mega_prepare_extpassthru()
1002 * @adapter - pointer to our soft state
1003 * @scb - our scsi control block
1004 * @cmd - scsi command from the mid-layer
1005 * @channel - actual channel on the controller
1006 * @target - actual id on the controller.
1007 *
1008 * prepare a command for the scsi physical devices. This rountine prepares
1009 * commands for devices which can take extended CDBs (>10 bytes)
1010 */
1011 static mega_ext_passthru *
1012 mega_prepare_extpassthru(adapter_t *adapter, scb_t *scb, Scsi_Cmnd *cmd,
1013 int channel, int target)
1014 {
1015 mega_ext_passthru *epthru;
1016
1017 epthru = scb->epthru;
1018 memset(epthru, 0, sizeof(mega_ext_passthru));
1019
1020 /* 0=6sec/1=60sec/2=10min/3=3hrs */
1021 epthru->timeout = 2;
1022
1023 epthru->ars = 1;
1024 epthru->reqsenselen = 14;
1025 epthru->islogical = 0;
1026
1027 epthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
1028 epthru->target = (adapter->flag & BOARD_40LD) ?
1029 (channel << 4) | target : target;
1030
1031 epthru->cdblen = cmd->cmd_len;
1032 epthru->logdrv = cmd->device->lun;
1033
1034 memcpy(epthru->cdb, cmd->cmnd, cmd->cmd_len);
1035
1036 /* Not sure about the direction */
1037 scb->dma_direction = PCI_DMA_BIDIRECTIONAL;
1038
1039 switch(cmd->cmnd[0]) {
1040 case INQUIRY:
1041 case READ_CAPACITY:
1042 if(!(adapter->flag & (1L << cmd->device->channel))) {
1043
1044 printk(KERN_NOTICE
1045 "scsi%d: scanning scsi channel %d [P%d] ",
1046 adapter->host->host_no,
1047 cmd->device->channel, channel);
1048 printk("for physical devices.\n");
1049
1050 adapter->flag |= (1L << cmd->device->channel);
1051 }
1052 /* Fall through */
1053 default:
1054 epthru->numsgelements = mega_build_sglist(adapter, scb,
1055 &epthru->dataxferaddr, &epthru->dataxferlen);
1056 break;
1057 }
1058
1059 return epthru;
1060 }
1061
1062 static void
1063 __mega_runpendq(adapter_t *adapter)
1064 {
1065 scb_t *scb;
1066 struct list_head *pos, *next;
1067
1068 /* Issue any pending commands to the card */
1069 list_for_each_safe(pos, next, &adapter->pending_list) {
1070
1071 scb = list_entry(pos, scb_t, list);
1072
1073 if( !(scb->state & SCB_ISSUED) ) {
1074
1075 if( issue_scb(adapter, scb) != 0 )
1076 return;
1077 }
1078 }
1079
1080 return;
1081 }
1082
1083
1084 /**
1085 * issue_scb()
1086 * @adapter - pointer to our soft state
1087 * @scb - scsi control block
1088 *
1089 * Post a command to the card if the mailbox is available, otherwise return
1090 * busy. We also take the scb from the pending list if the mailbox is
1091 * available.
1092 */
1093 static int
1094 issue_scb(adapter_t *adapter, scb_t *scb)
1095 {
1096 volatile mbox64_t *mbox64 = adapter->mbox64;
1097 volatile mbox_t *mbox = adapter->mbox;
1098 unsigned int i = 0;
1099
1100 if(unlikely(mbox->m_in.busy)) {
1101 do {
1102 udelay(1);
1103 i++;
1104 } while( mbox->m_in.busy && (i < max_mbox_busy_wait) );
1105
1106 if(mbox->m_in.busy) return -1;
1107 }
1108
1109 /* Copy mailbox data into host structure */
1110 memcpy((char *)&mbox->m_out, (char *)scb->raw_mbox,
1111 sizeof(struct mbox_out));
1112
1113 mbox->m_out.cmdid = scb->idx; /* Set cmdid */
1114 mbox->m_in.busy = 1; /* Set busy */
1115
1116
1117 /*
1118 * Increment the pending queue counter
1119 */
1120 atomic_inc(&adapter->pend_cmds);
1121
1122 switch (mbox->m_out.cmd) {
1123 case MEGA_MBOXCMD_LREAD64:
1124 case MEGA_MBOXCMD_LWRITE64:
1125 case MEGA_MBOXCMD_PASSTHRU64:
1126 case MEGA_MBOXCMD_EXTPTHRU:
1127 mbox64->xfer_segment_lo = mbox->m_out.xferaddr;
1128 mbox64->xfer_segment_hi = 0;
1129 mbox->m_out.xferaddr = 0xFFFFFFFF;
1130 break;
1131 default:
1132 mbox64->xfer_segment_lo = 0;
1133 mbox64->xfer_segment_hi = 0;
1134 }
1135
1136 /*
1137 * post the command
1138 */
1139 scb->state |= SCB_ISSUED;
1140
1141 if( likely(adapter->flag & BOARD_MEMMAP) ) {
1142 mbox->m_in.poll = 0;
1143 mbox->m_in.ack = 0;
1144 WRINDOOR(adapter, adapter->mbox_dma | 0x1);
1145 }
1146 else {
1147 irq_enable(adapter);
1148 issue_command(adapter);
1149 }
1150
1151 return 0;
1152 }
1153
1154 /*
1155 * Wait until the controller's mailbox is available
1156 */
1157 static inline int
1158 mega_busywait_mbox (adapter_t *adapter)
1159 {
1160 if (adapter->mbox->m_in.busy)
1161 return __mega_busywait_mbox(adapter);
1162 return 0;
1163 }
1164
1165 /**
1166 * issue_scb_block()
1167 * @adapter - pointer to our soft state
1168 * @raw_mbox - the mailbox
1169 *
1170 * Issue a scb in synchronous and non-interrupt mode
1171 */
1172 static int
1173 issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
1174 {
1175 volatile mbox64_t *mbox64 = adapter->mbox64;
1176 volatile mbox_t *mbox = adapter->mbox;
1177 u8 byte;
1178
1179 /* Wait until mailbox is free */
1180 if(mega_busywait_mbox (adapter))
1181 goto bug_blocked_mailbox;
1182
1183 /* Copy mailbox data into host structure */
1184 memcpy((char *) mbox, raw_mbox, sizeof(struct mbox_out));
1185 mbox->m_out.cmdid = 0xFE;
1186 mbox->m_in.busy = 1;
1187
1188 switch (raw_mbox[0]) {
1189 case MEGA_MBOXCMD_LREAD64:
1190 case MEGA_MBOXCMD_LWRITE64:
1191 case MEGA_MBOXCMD_PASSTHRU64:
1192 case MEGA_MBOXCMD_EXTPTHRU:
1193 mbox64->xfer_segment_lo = mbox->m_out.xferaddr;
1194 mbox64->xfer_segment_hi = 0;
1195 mbox->m_out.xferaddr = 0xFFFFFFFF;
1196 break;
1197 default:
1198 mbox64->xfer_segment_lo = 0;
1199 mbox64->xfer_segment_hi = 0;
1200 }
1201
1202 if( likely(adapter->flag & BOARD_MEMMAP) ) {
1203 mbox->m_in.poll = 0;
1204 mbox->m_in.ack = 0;
1205 mbox->m_in.numstatus = 0xFF;
1206 mbox->m_in.status = 0xFF;
1207 WRINDOOR(adapter, adapter->mbox_dma | 0x1);
1208
1209 while((volatile u8)mbox->m_in.numstatus == 0xFF)
1210 cpu_relax();
1211
1212 mbox->m_in.numstatus = 0xFF;
1213
1214 while( (volatile u8)mbox->m_in.poll != 0x77 )
1215 cpu_relax();
1216
1217 mbox->m_in.poll = 0;
1218 mbox->m_in.ack = 0x77;
1219
1220 WRINDOOR(adapter, adapter->mbox_dma | 0x2);
1221
1222 while(RDINDOOR(adapter) & 0x2)
1223 cpu_relax();
1224 }
1225 else {
1226 irq_disable(adapter);
1227 issue_command(adapter);
1228
1229 while (!((byte = irq_state(adapter)) & INTR_VALID))
1230 cpu_relax();
1231
1232 set_irq_state(adapter, byte);
1233 irq_enable(adapter);
1234 irq_ack(adapter);
1235 }
1236
1237 return mbox->m_in.status;
1238
1239 bug_blocked_mailbox:
1240 printk(KERN_WARNING "megaraid: Blocked mailbox......!!\n");
1241 udelay (1000);
1242 return -1;
1243 }
1244
1245
1246 /**
1247 * megaraid_isr_iomapped()
1248 * @irq - irq
1249 * @devp - pointer to our soft state
1250 *
1251 * Interrupt service routine for io-mapped controllers.
1252 * Find out if our device is interrupting. If yes, acknowledge the interrupt
1253 * and service the completed commands.
1254 */
1255 static irqreturn_t
1256 megaraid_isr_iomapped(int irq, void *devp)
1257 {
1258 adapter_t *adapter = devp;
1259 unsigned long flags;
1260 u8 status;
1261 u8 nstatus;
1262 u8 completed[MAX_FIRMWARE_STATUS];
1263 u8 byte;
1264 int handled = 0;
1265
1266
1267 /*
1268 * loop till F/W has more commands for us to complete.
1269 */
1270 spin_lock_irqsave(&adapter->lock, flags);
1271
1272 do {
1273 /* Check if a valid interrupt is pending */
1274 byte = irq_state(adapter);
1275 if( (byte & VALID_INTR_BYTE) == 0 ) {
1276 /*
1277 * No more pending commands
1278 */
1279 goto out_unlock;
1280 }
1281 set_irq_state(adapter, byte);
1282
1283 while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
1284 == 0xFF)
1285 cpu_relax();
1286 adapter->mbox->m_in.numstatus = 0xFF;
1287
1288 status = adapter->mbox->m_in.status;
1289
1290 /*
1291 * decrement the pending queue counter
1292 */
1293 atomic_sub(nstatus, &adapter->pend_cmds);
1294
1295 memcpy(completed, (void *)adapter->mbox->m_in.completed,
1296 nstatus);
1297
1298 /* Acknowledge interrupt */
1299 irq_ack(adapter);
1300
1301 mega_cmd_done(adapter, completed, nstatus, status);
1302
1303 mega_rundoneq(adapter);
1304
1305 handled = 1;
1306
1307 /* Loop through any pending requests */
1308 if(atomic_read(&adapter->quiescent) == 0) {
1309 mega_runpendq(adapter);
1310 }
1311
1312 } while(1);
1313
1314 out_unlock:
1315
1316 spin_unlock_irqrestore(&adapter->lock, flags);
1317
1318 return IRQ_RETVAL(handled);
1319 }
1320
1321
1322 /**
1323 * megaraid_isr_memmapped()
1324 * @irq - irq
1325 * @devp - pointer to our soft state
1326 *
1327 * Interrupt service routine for memory-mapped controllers.
1328 * Find out if our device is interrupting. If yes, acknowledge the interrupt
1329 * and service the completed commands.
1330 */
1331 static irqreturn_t
1332 megaraid_isr_memmapped(int irq, void *devp)
1333 {
1334 adapter_t *adapter = devp;
1335 unsigned long flags;
1336 u8 status;
1337 u32 dword = 0;
1338 u8 nstatus;
1339 u8 completed[MAX_FIRMWARE_STATUS];
1340 int handled = 0;
1341
1342
1343 /*
1344 * loop till F/W has more commands for us to complete.
1345 */
1346 spin_lock_irqsave(&adapter->lock, flags);
1347
1348 do {
1349 /* Check if a valid interrupt is pending */
1350 dword = RDOUTDOOR(adapter);
1351 if(dword != 0x10001234) {
1352 /*
1353 * No more pending commands
1354 */
1355 goto out_unlock;
1356 }
1357 WROUTDOOR(adapter, 0x10001234);
1358
1359 while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
1360 == 0xFF) {
1361 cpu_relax();
1362 }
1363 adapter->mbox->m_in.numstatus = 0xFF;
1364
1365 status = adapter->mbox->m_in.status;
1366
1367 /*
1368 * decrement the pending queue counter
1369 */
1370 atomic_sub(nstatus, &adapter->pend_cmds);
1371
1372 memcpy(completed, (void *)adapter->mbox->m_in.completed,
1373 nstatus);
1374
1375 /* Acknowledge interrupt */
1376 WRINDOOR(adapter, 0x2);
1377
1378 handled = 1;
1379
1380 while( RDINDOOR(adapter) & 0x02 )
1381 cpu_relax();
1382
1383 mega_cmd_done(adapter, completed, nstatus, status);
1384
1385 mega_rundoneq(adapter);
1386
1387 /* Loop through any pending requests */
1388 if(atomic_read(&adapter->quiescent) == 0) {
1389 mega_runpendq(adapter);
1390 }
1391
1392 } while(1);
1393
1394 out_unlock:
1395
1396 spin_unlock_irqrestore(&adapter->lock, flags);
1397
1398 return IRQ_RETVAL(handled);
1399 }
1400 /**
1401 * mega_cmd_done()
1402 * @adapter - pointer to our soft state
1403 * @completed - array of ids of completed commands
1404 * @nstatus - number of completed commands
1405 * @status - status of the last command completed
1406 *
1407 * Complete the comamnds and call the scsi mid-layer callback hooks.
1408 */
1409 static void
1410 mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
1411 {
1412 mega_ext_passthru *epthru = NULL;
1413 struct scatterlist *sgl;
1414 Scsi_Cmnd *cmd = NULL;
1415 mega_passthru *pthru = NULL;
1416 mbox_t *mbox = NULL;
1417 u8 c;
1418 scb_t *scb;
1419 int islogical;
1420 int cmdid;
1421 int i;
1422
1423 /*
1424 * for all the commands completed, call the mid-layer callback routine
1425 * and free the scb.
1426 */
1427 for( i = 0; i < nstatus; i++ ) {
1428
1429 cmdid = completed[i];
1430
1431 if( cmdid == CMDID_INT_CMDS ) { /* internal command */
1432 scb = &adapter->int_scb;
1433 cmd = scb->cmd;
1434 mbox = (mbox_t *)scb->raw_mbox;
1435
1436 /*
1437 * Internal command interface do not fire the extended
1438 * passthru or 64-bit passthru
1439 */
1440 pthru = scb->pthru;
1441
1442 }
1443 else {
1444 scb = &adapter->scb_list[cmdid];
1445
1446 /*
1447 * Make sure f/w has completed a valid command
1448 */
1449 if( !(scb->state & SCB_ISSUED) || scb->cmd == NULL ) {
1450 printk(KERN_CRIT
1451 "megaraid: invalid command ");
1452 printk("Id %d, scb->state:%x, scsi cmd:%p\n",
1453 cmdid, scb->state, scb->cmd);
1454
1455 continue;
1456 }
1457
1458 /*
1459 * Was a abort issued for this command
1460 */
1461 if( scb->state & SCB_ABORT ) {
1462
1463 printk(KERN_WARNING
1464 "megaraid: aborted cmd %lx[%x] complete.\n",
1465 scb->cmd->serial_number, scb->idx);
1466
1467 scb->cmd->result = (DID_ABORT << 16);
1468
1469 list_add_tail(SCSI_LIST(scb->cmd),
1470 &adapter->completed_list);
1471
1472 mega_free_scb(adapter, scb);
1473
1474 continue;
1475 }
1476
1477 /*
1478 * Was a reset issued for this command
1479 */
1480 if( scb->state & SCB_RESET ) {
1481
1482 printk(KERN_WARNING
1483 "megaraid: reset cmd %lx[%x] complete.\n",
1484 scb->cmd->serial_number, scb->idx);
1485
1486 scb->cmd->result = (DID_RESET << 16);
1487
1488 list_add_tail(SCSI_LIST(scb->cmd),
1489 &adapter->completed_list);
1490
1491 mega_free_scb (adapter, scb);
1492
1493 continue;
1494 }
1495
1496 cmd = scb->cmd;
1497 pthru = scb->pthru;
1498 epthru = scb->epthru;
1499 mbox = (mbox_t *)scb->raw_mbox;
1500
1501 #if MEGA_HAVE_STATS
1502 {
1503
1504 int logdrv = mbox->m_out.logdrv;
1505
1506 islogical = adapter->logdrv_chan[cmd->channel];
1507 /*
1508 * Maintain an error counter for the logical drive.
1509 * Some application like SNMP agent need such
1510 * statistics
1511 */
1512 if( status && islogical && (cmd->cmnd[0] == READ_6 ||
1513 cmd->cmnd[0] == READ_10 ||
1514 cmd->cmnd[0] == READ_12)) {
1515 /*
1516 * Logical drive number increases by 0x80 when
1517 * a logical drive is deleted
1518 */
1519 adapter->rd_errors[logdrv%0x80]++;
1520 }
1521
1522 if( status && islogical && (cmd->cmnd[0] == WRITE_6 ||
1523 cmd->cmnd[0] == WRITE_10 ||
1524 cmd->cmnd[0] == WRITE_12)) {
1525 /*
1526 * Logical drive number increases by 0x80 when
1527 * a logical drive is deleted
1528 */
1529 adapter->wr_errors[logdrv%0x80]++;
1530 }
1531
1532 }
1533 #endif
1534 }
1535
1536 /*
1537 * Do not return the presence of hard disk on the channel so,
1538 * inquiry sent, and returned data==hard disk or removable
1539 * hard disk and not logical, request should return failure! -
1540 * PJ
1541 */
1542 islogical = adapter->logdrv_chan[cmd->device->channel];
1543 if( cmd->cmnd[0] == INQUIRY && !islogical ) {
1544
1545 sgl = scsi_sglist(cmd);
1546 if( sg_page(sgl) ) {
1547 c = *(unsigned char *) sg_virt(&sgl[0]);
1548 } else {
1549 printk(KERN_WARNING
1550 "megaraid: invalid sg.\n");
1551 c = 0;
1552 }
1553
1554 if(IS_RAID_CH(adapter, cmd->device->channel) &&
1555 ((c & 0x1F ) == TYPE_DISK)) {
1556 status = 0xF0;
1557 }
1558 }
1559
1560 /* clear result; otherwise, success returns corrupt value */
1561 cmd->result = 0;
1562
1563 /* Convert MegaRAID status to Linux error code */
1564 switch (status) {
1565 case 0x00: /* SUCCESS , i.e. SCSI_STATUS_GOOD */
1566 cmd->result |= (DID_OK << 16);
1567 break;
1568
1569 case 0x02: /* ERROR_ABORTED, i.e.
1570 SCSI_STATUS_CHECK_CONDITION */
1571
1572 /* set sense_buffer and result fields */
1573 if( mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU ||
1574 mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU64 ) {
1575
1576 memcpy(cmd->sense_buffer, pthru->reqsensearea,
1577 14);
1578
1579 cmd->result = (DRIVER_SENSE << 24) |
1580 (DID_OK << 16) |
1581 (CHECK_CONDITION << 1);
1582 }
1583 else {
1584 if (mbox->m_out.cmd == MEGA_MBOXCMD_EXTPTHRU) {
1585
1586 memcpy(cmd->sense_buffer,
1587 epthru->reqsensearea, 14);
1588
1589 cmd->result = (DRIVER_SENSE << 24) |
1590 (DID_OK << 16) |
1591 (CHECK_CONDITION << 1);
1592 } else {
1593 cmd->sense_buffer[0] = 0x70;
1594 cmd->sense_buffer[2] = ABORTED_COMMAND;
1595 cmd->result |= (CHECK_CONDITION << 1);
1596 }
1597 }
1598 break;
1599
1600 case 0x08: /* ERR_DEST_DRIVE_FAILED, i.e.
1601 SCSI_STATUS_BUSY */
1602 cmd->result |= (DID_BUS_BUSY << 16) | status;
1603 break;
1604
1605 default:
1606 #if MEGA_HAVE_CLUSTERING
1607 /*
1608 * If TEST_UNIT_READY fails, we know
1609 * MEGA_RESERVATION_STATUS failed
1610 */
1611 if( cmd->cmnd[0] == TEST_UNIT_READY ) {
1612 cmd->result |= (DID_ERROR << 16) |
1613 (RESERVATION_CONFLICT << 1);
1614 }
1615 else
1616 /*
1617 * Error code returned is 1 if Reserve or Release
1618 * failed or the input parameter is invalid
1619 */
1620 if( status == 1 &&
1621 (cmd->cmnd[0] == RESERVE ||
1622 cmd->cmnd[0] == RELEASE) ) {
1623
1624 cmd->result |= (DID_ERROR << 16) |
1625 (RESERVATION_CONFLICT << 1);
1626 }
1627 else
1628 #endif
1629 cmd->result |= (DID_BAD_TARGET << 16)|status;
1630 }
1631
1632 /*
1633 * Only free SCBs for the commands coming down from the
1634 * mid-layer, not for which were issued internally
1635 *
1636 * For internal command, restore the status returned by the
1637 * firmware so that user can interpret it.
1638 */
1639 if( cmdid == CMDID_INT_CMDS ) { /* internal command */
1640 cmd->result = status;
1641
1642 /*
1643 * Remove the internal command from the pending list
1644 */
1645 list_del_init(&scb->list);
1646 scb->state = SCB_FREE;
1647 }
1648 else {
1649 mega_free_scb(adapter, scb);
1650 }
1651
1652 /* Add Scsi_Command to end of completed queue */
1653 list_add_tail(SCSI_LIST(cmd), &adapter->completed_list);
1654 }
1655 }
1656
1657
1658 /*
1659 * mega_runpendq()
1660 *
1661 * Run through the list of completed requests and finish it
1662 */
1663 static void
1664 mega_rundoneq (adapter_t *adapter)
1665 {
1666 Scsi_Cmnd *cmd;
1667 struct list_head *pos;
1668
1669 list_for_each(pos, &adapter->completed_list) {
1670
1671 struct scsi_pointer* spos = (struct scsi_pointer *)pos;
1672
1673 cmd = list_entry(spos, Scsi_Cmnd, SCp);
1674 cmd->scsi_done(cmd);
1675 }
1676
1677 INIT_LIST_HEAD(&adapter->completed_list);
1678 }
1679
1680
1681 /*
1682 * Free a SCB structure
1683 * Note: We assume the scsi commands associated with this scb is not free yet.
1684 */
1685 static void
1686 mega_free_scb(adapter_t *adapter, scb_t *scb)
1687 {
1688 switch( scb->dma_type ) {
1689
1690 case MEGA_DMA_TYPE_NONE:
1691 break;
1692
1693 case MEGA_SGLIST:
1694 scsi_dma_unmap(scb->cmd);
1695 break;
1696 default:
1697 break;
1698 }
1699
1700 /*
1701 * Remove from the pending list
1702 */
1703 list_del_init(&scb->list);
1704
1705 /* Link the scb back into free list */
1706 scb->state = SCB_FREE;
1707 scb->cmd = NULL;
1708
1709 list_add(&scb->list, &adapter->free_list);
1710 }
1711
1712
1713 static int
1714 __mega_busywait_mbox (adapter_t *adapter)
1715 {
1716 volatile mbox_t *mbox = adapter->mbox;
1717 long counter;
1718
1719 for (counter = 0; counter < 10000; counter++) {
1720 if (!mbox->m_in.busy)
1721 return 0;
1722 udelay(100);
1723 cond_resched();
1724 }
1725 return -1; /* give up after 1 second */
1726 }
1727
1728 /*
1729 * Copies data to SGLIST
1730 * Note: For 64 bit cards, we need a minimum of one SG element for read/write
1731 */
1732 static int
1733 mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
1734 {
1735 struct scatterlist *sg;
1736 Scsi_Cmnd *cmd;
1737 int sgcnt;
1738 int idx;
1739
1740 cmd = scb->cmd;
1741
1742 /*
1743 * Copy Scatter-Gather list info into controller structure.
1744 *
1745 * The number of sg elements returned must not exceed our limit
1746 */
1747 sgcnt = scsi_dma_map(cmd);
1748
1749 scb->dma_type = MEGA_SGLIST;
1750
1751 BUG_ON(sgcnt > adapter->sglen || sgcnt < 0);
1752
1753 *len = 0;
1754
1755 if (scsi_sg_count(cmd) == 1 && !adapter->has_64bit_addr) {
1756 sg = scsi_sglist(cmd);
1757 scb->dma_h_bulkdata = sg_dma_address(sg);
1758 *buf = (u32)scb->dma_h_bulkdata;
1759 *len = sg_dma_len(sg);
1760 return 0;
1761 }
1762
1763 scsi_for_each_sg(cmd, sg, sgcnt, idx) {
1764 if (adapter->has_64bit_addr) {
1765 scb->sgl64[idx].address = sg_dma_address(sg);
1766 *len += scb->sgl64[idx].length = sg_dma_len(sg);
1767 } else {
1768 scb->sgl[idx].address = sg_dma_address(sg);
1769 *len += scb->sgl[idx].length = sg_dma_len(sg);
1770 }
1771 }
1772
1773 /* Reset pointer and length fields */
1774 *buf = scb->sgl_dma_addr;
1775
1776 /* Return count of SG requests */
1777 return sgcnt;
1778 }
1779
1780
1781 /*
1782 * mega_8_to_40ld()
1783 *
1784 * takes all info in AdapterInquiry structure and puts it into ProductInfo and
1785 * Enquiry3 structures for later use
1786 */
1787 static void
1788 mega_8_to_40ld(mraid_inquiry *inquiry, mega_inquiry3 *enquiry3,
1789 mega_product_info *product_info)
1790 {
1791 int i;
1792
1793 product_info->max_commands = inquiry->adapter_info.max_commands;
1794 enquiry3->rebuild_rate = inquiry->adapter_info.rebuild_rate;
1795 product_info->nchannels = inquiry->adapter_info.nchannels;
1796
1797 for (i = 0; i < 4; i++) {
1798 product_info->fw_version[i] =
1799 inquiry->adapter_info.fw_version[i];
1800
1801 product_info->bios_version[i] =
1802 inquiry->adapter_info.bios_version[i];
1803 }
1804 enquiry3->cache_flush_interval =
1805 inquiry->adapter_info.cache_flush_interval;
1806
1807 product_info->dram_size = inquiry->adapter_info.dram_size;
1808
1809 enquiry3->num_ldrv = inquiry->logdrv_info.num_ldrv;
1810
1811 for (i = 0; i < MAX_LOGICAL_DRIVES_8LD; i++) {
1812 enquiry3->ldrv_size[i] = inquiry->logdrv_info.ldrv_size[i];
1813 enquiry3->ldrv_prop[i] = inquiry->logdrv_info.ldrv_prop[i];
1814 enquiry3->ldrv_state[i] = inquiry->logdrv_info.ldrv_state[i];
1815 }
1816
1817 for (i = 0; i < (MAX_PHYSICAL_DRIVES); i++)
1818 enquiry3->pdrv_state[i] = inquiry->pdrv_info.pdrv_state[i];
1819 }
1820
1821 static inline void
1822 mega_free_sgl(adapter_t *adapter)
1823 {
1824 scb_t *scb;
1825 int i;
1826
1827 for(i = 0; i < adapter->max_cmds; i++) {
1828
1829 scb = &adapter->scb_list[i];
1830
1831 if( scb->sgl64 ) {
1832 pci_free_consistent(adapter->dev,
1833 sizeof(mega_sgl64) * adapter->sglen,
1834 scb->sgl64,
1835 scb->sgl_dma_addr);
1836
1837 scb->sgl64 = NULL;
1838 }
1839
1840 if( scb->pthru ) {
1841 pci_free_consistent(adapter->dev, sizeof(mega_passthru),
1842 scb->pthru, scb->pthru_dma_addr);
1843
1844 scb->pthru = NULL;
1845 }
1846
1847 if( scb->epthru ) {
1848 pci_free_consistent(adapter->dev,
1849 sizeof(mega_ext_passthru),
1850 scb->epthru, scb->epthru_dma_addr);
1851
1852 scb->epthru = NULL;
1853 }
1854
1855 }
1856 }
1857
1858
1859 /*
1860 * Get information about the card/driver
1861 */
1862 const char *
1863 megaraid_info(struct Scsi_Host *host)
1864 {
1865 static char buffer[512];
1866 adapter_t *adapter;
1867
1868 adapter = (adapter_t *)host->hostdata;
1869
1870 sprintf (buffer,
1871 "LSI Logic MegaRAID %s %d commands %d targs %d chans %d luns",
1872 adapter->fw_version, adapter->product_info.max_commands,
1873 adapter->host->max_id, adapter->host->max_channel,
1874 adapter->host->max_lun);
1875 return buffer;
1876 }
1877
1878 /*
1879 * Abort a previous SCSI request. Only commands on the pending list can be
1880 * aborted. All the commands issued to the F/W must complete.
1881 */
1882 static int
1883 megaraid_abort(Scsi_Cmnd *cmd)
1884 {
1885 adapter_t *adapter;
1886 int rval;
1887
1888 adapter = (adapter_t *)cmd->device->host->hostdata;
1889
1890 rval = megaraid_abort_and_reset(adapter, cmd, SCB_ABORT);
1891
1892 /*
1893 * This is required here to complete any completed requests
1894 * to be communicated over to the mid layer.
1895 */
1896 mega_rundoneq(adapter);
1897
1898 return rval;
1899 }
1900
1901
1902 static int
1903 megaraid_reset(struct scsi_cmnd *cmd)
1904 {
1905 adapter_t *adapter;
1906 megacmd_t mc;
1907 int rval;
1908
1909 adapter = (adapter_t *)cmd->device->host->hostdata;
1910
1911 #if MEGA_HAVE_CLUSTERING
1912 mc.cmd = MEGA_CLUSTER_CMD;
1913 mc.opcode = MEGA_RESET_RESERVATIONS;
1914
1915 if( mega_internal_command(adapter, &mc, NULL) != 0 ) {
1916 printk(KERN_WARNING
1917 "megaraid: reservation reset failed.\n");
1918 }
1919 else {
1920 printk(KERN_INFO "megaraid: reservation reset.\n");
1921 }
1922 #endif
1923
1924 spin_lock_irq(&adapter->lock);
1925
1926 rval = megaraid_abort_and_reset(adapter, cmd, SCB_RESET);
1927
1928 /*
1929 * This is required here to complete any completed requests
1930 * to be communicated over to the mid layer.
1931 */
1932 mega_rundoneq(adapter);
1933 spin_unlock_irq(&adapter->lock);
1934
1935 return rval;
1936 }
1937
1938 /**
1939 * megaraid_abort_and_reset()
1940 * @adapter - megaraid soft state
1941 * @cmd - scsi command to be aborted or reset
1942 * @aor - abort or reset flag
1943 *
1944 * Try to locate the scsi command in the pending queue. If found and is not
1945 * issued to the controller, abort/reset it. Otherwise return failure
1946 */
1947 static int
1948 megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
1949 {
1950 struct list_head *pos, *next;
1951 scb_t *scb;
1952
1953 printk(KERN_WARNING "megaraid: %s-%lx cmd=%x <c=%d t=%d l=%d>\n",
1954 (aor == SCB_ABORT)? "ABORTING":"RESET", cmd->serial_number,
1955 cmd->cmnd[0], cmd->device->channel,
1956 cmd->device->id, cmd->device->lun);
1957
1958 if(list_empty(&adapter->pending_list))
1959 return FALSE;
1960
1961 list_for_each_safe(pos, next, &adapter->pending_list) {
1962
1963 scb = list_entry(pos, scb_t, list);
1964
1965 if (scb->cmd == cmd) { /* Found command */
1966
1967 scb->state |= aor;
1968
1969 /*
1970 * Check if this command has firmware ownership. If
1971 * yes, we cannot reset this command. Whenever f/w
1972 * completes this command, we will return appropriate
1973 * status from ISR.
1974 */
1975 if( scb->state & SCB_ISSUED ) {
1976
1977 printk(KERN_WARNING
1978 "megaraid: %s-%lx[%x], fw owner.\n",
1979 (aor==SCB_ABORT) ? "ABORTING":"RESET",
1980 cmd->serial_number, scb->idx);
1981
1982 return FALSE;
1983 }
1984 else {
1985
1986 /*
1987 * Not yet issued! Remove from the pending
1988 * list
1989 */
1990 printk(KERN_WARNING
1991 "megaraid: %s-%lx[%x], driver owner.\n",
1992 (aor==SCB_ABORT) ? "ABORTING":"RESET",
1993 cmd->serial_number, scb->idx);
1994
1995 mega_free_scb(adapter, scb);
1996
1997 if( aor == SCB_ABORT ) {
1998 cmd->result = (DID_ABORT << 16);
1999 }
2000 else {
2001 cmd->result = (DID_RESET << 16);
2002 }
2003
2004 list_add_tail(SCSI_LIST(cmd),
2005 &adapter->completed_list);
2006
2007 return TRUE;
2008 }
2009 }
2010 }
2011
2012 return FALSE;
2013 }
2014
2015 static inline int
2016 make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
2017 {
2018 *pdev = alloc_pci_dev();
2019
2020 if( *pdev == NULL ) return -1;
2021
2022 memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
2023
2024 if( pci_set_dma_mask(*pdev, DMA_BIT_MASK(32)) != 0 ) {
2025 kfree(*pdev);
2026 return -1;
2027 }
2028
2029 return 0;
2030 }
2031
2032 static inline void
2033 free_local_pdev(struct pci_dev *pdev)
2034 {
2035 kfree(pdev);
2036 }
2037
2038 /**
2039 * mega_allocate_inquiry()
2040 * @dma_handle - handle returned for dma address
2041 * @pdev - handle to pci device
2042 *
2043 * allocates memory for inquiry structure
2044 */
2045 static inline void *
2046 mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
2047 {
2048 return pci_alloc_consistent(pdev, sizeof(mega_inquiry3), dma_handle);
2049 }
2050
2051
2052 static inline void
2053 mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
2054 {
2055 pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry, dma_handle);
2056 }
2057
2058
2059 #ifdef CONFIG_PROC_FS
2060 /* Following code handles /proc fs */
2061
2062 #define CREATE_READ_PROC(string, func) create_proc_read_entry(string, \
2063 S_IRUSR | S_IFREG, \
2064 controller_proc_dir_entry, \
2065 func, adapter)
2066
2067 /**
2068 * mega_create_proc_entry()
2069 * @index - index in soft state array
2070 * @parent - parent node for this /proc entry
2071 *
2072 * Creates /proc entries for our controllers.
2073 */
2074 static void
2075 mega_create_proc_entry(int index, struct proc_dir_entry *parent)
2076 {
2077 struct proc_dir_entry *controller_proc_dir_entry = NULL;
2078 u8 string[64] = { 0 };
2079 adapter_t *adapter = hba_soft_state[index];
2080
2081 sprintf(string, "hba%d", adapter->host->host_no);
2082
2083 controller_proc_dir_entry =
2084 adapter->controller_proc_dir_entry = proc_mkdir(string, parent);
2085
2086 if(!controller_proc_dir_entry) {
2087 printk(KERN_WARNING "\nmegaraid: proc_mkdir failed\n");
2088 return;
2089 }
2090 adapter->proc_read = CREATE_READ_PROC("config", proc_read_config);
2091 adapter->proc_stat = CREATE_READ_PROC("stat", proc_read_stat);
2092 adapter->proc_mbox = CREATE_READ_PROC("mailbox", proc_read_mbox);
2093 #if MEGA_HAVE_ENH_PROC
2094 adapter->proc_rr = CREATE_READ_PROC("rebuild-rate", proc_rebuild_rate);
2095 adapter->proc_battery = CREATE_READ_PROC("battery-status",
2096 proc_battery);
2097
2098 /*
2099 * Display each physical drive on its channel
2100 */
2101 adapter->proc_pdrvstat[0] = CREATE_READ_PROC("diskdrives-ch0",
2102 proc_pdrv_ch0);
2103 adapter->proc_pdrvstat[1] = CREATE_READ_PROC("diskdrives-ch1",
2104 proc_pdrv_ch1);
2105 adapter->proc_pdrvstat[2] = CREATE_READ_PROC("diskdrives-ch2",
2106 proc_pdrv_ch2);
2107 adapter->proc_pdrvstat[3] = CREATE_READ_PROC("diskdrives-ch3",
2108 proc_pdrv_ch3);
2109
2110 /*
2111 * Display a set of up to 10 logical drive through each of following
2112 * /proc entries
2113 */
2114 adapter->proc_rdrvstat[0] = CREATE_READ_PROC("raiddrives-0-9",
2115 proc_rdrv_10);
2116 adapter->proc_rdrvstat[1] = CREATE_READ_PROC("raiddrives-10-19",
2117 proc_rdrv_20);
2118 adapter->proc_rdrvstat[2] = CREATE_READ_PROC("raiddrives-20-29",
2119 proc_rdrv_30);
2120 adapter->proc_rdrvstat[3] = CREATE_READ_PROC("raiddrives-30-39",
2121 proc_rdrv_40);
2122 #endif
2123 }
2124
2125
2126 /**
2127 * proc_read_config()
2128 * @page - buffer to write the data in
2129 * @start - where the actual data has been written in page
2130 * @offset - same meaning as the read system call
2131 * @count - same meaning as the read system call
2132 * @eof - set if no more data needs to be returned
2133 * @data - pointer to our soft state
2134 *
2135 * Display configuration information about the controller.
2136 */
2137 static int
2138 proc_read_config(char *page, char **start, off_t offset, int count, int *eof,
2139 void *data)
2140 {
2141
2142 adapter_t *adapter = (adapter_t *)data;
2143 int len = 0;
2144
2145 len += sprintf(page+len, "%s", MEGARAID_VERSION);
2146
2147 if(adapter->product_info.product_name[0])
2148 len += sprintf(page+len, "%s\n",
2149 adapter->product_info.product_name);
2150
2151 len += sprintf(page+len, "Controller Type: ");
2152
2153 if( adapter->flag & BOARD_MEMMAP ) {
2154 len += sprintf(page+len,
2155 "438/466/467/471/493/518/520/531/532\n");
2156 }
2157 else {
2158 len += sprintf(page+len,
2159 "418/428/434\n");
2160 }
2161
2162 if(adapter->flag & BOARD_40LD) {
2163 len += sprintf(page+len,
2164 "Controller Supports 40 Logical Drives\n");
2165 }
2166
2167 if(adapter->flag & BOARD_64BIT) {
2168 len += sprintf(page+len,
2169 "Controller capable of 64-bit memory addressing\n");
2170 }
2171 if( adapter->has_64bit_addr ) {
2172 len += sprintf(page+len,
2173 "Controller using 64-bit memory addressing\n");
2174 }
2175 else {
2176 len += sprintf(page+len,
2177 "Controller is not using 64-bit memory addressing\n");
2178 }
2179
2180 len += sprintf(page+len, "Base = %08lx, Irq = %d, ", adapter->base,
2181 adapter->host->irq);
2182
2183 len += sprintf(page+len, "Logical Drives = %d, Channels = %d\n",
2184 adapter->numldrv, adapter->product_info.nchannels);
2185
2186 len += sprintf(page+len, "Version =%s:%s, DRAM = %dMb\n",
2187 adapter->fw_version, adapter->bios_version,
2188 adapter->product_info.dram_size);
2189
2190 len += sprintf(page+len,
2191 "Controller Queue Depth = %d, Driver Queue Depth = %d\n",
2192 adapter->product_info.max_commands, adapter->max_cmds);
2193
2194 len += sprintf(page+len, "support_ext_cdb = %d\n",
2195 adapter->support_ext_cdb);
2196 len += sprintf(page+len, "support_random_del = %d\n",
2197 adapter->support_random_del);
2198 len += sprintf(page+len, "boot_ldrv_enabled = %d\n",
2199 adapter->boot_ldrv_enabled);
2200 len += sprintf(page+len, "boot_ldrv = %d\n",
2201 adapter->boot_ldrv);
2202 len += sprintf(page+len, "boot_pdrv_enabled = %d\n",
2203 adapter->boot_pdrv_enabled);
2204 len += sprintf(page+len, "boot_pdrv_ch = %d\n",
2205 adapter->boot_pdrv_ch);
2206 len += sprintf(page+len, "boot_pdrv_tgt = %d\n",
2207 adapter->boot_pdrv_tgt);
2208 len += sprintf(page+len, "quiescent = %d\n",
2209 atomic_read(&adapter->quiescent));
2210 len += sprintf(page+len, "has_cluster = %d\n",
2211 adapter->has_cluster);
2212
2213 len += sprintf(page+len, "\nModule Parameters:\n");
2214 len += sprintf(page+len, "max_cmd_per_lun = %d\n",
2215 max_cmd_per_lun);
2216 len += sprintf(page+len, "max_sectors_per_io = %d\n",
2217 max_sectors_per_io);
2218
2219 *eof = 1;
2220
2221 return len;
2222 }
2223
2224
2225
2226 /**
2227 * proc_read_stat()
2228 * @page - buffer to write the data in
2229 * @start - where the actual data has been written in page
2230 * @offset - same meaning as the read system call
2231 * @count - same meaning as the read system call
2232 * @eof - set if no more data needs to be returned
2233 * @data - pointer to our soft state
2234 *
2235 * Diaplay statistical information about the I/O activity.
2236 */
2237 static int
2238 proc_read_stat(char *page, char **start, off_t offset, int count, int *eof,
2239 void *data)
2240 {
2241 adapter_t *adapter;
2242 int len;
2243 int i;
2244
2245 i = 0; /* avoid compilation warnings */
2246 len = 0;
2247 adapter = (adapter_t *)data;
2248
2249 len = sprintf(page, "Statistical Information for this controller\n");
2250 len += sprintf(page+len, "pend_cmds = %d\n",
2251 atomic_read(&adapter->pend_cmds));
2252 #if MEGA_HAVE_STATS
2253 for(i = 0; i < adapter->numldrv; i++) {
2254 len += sprintf(page+len, "Logical Drive %d:\n", i);
2255
2256 len += sprintf(page+len,
2257 "\tReads Issued = %lu, Writes Issued = %lu\n",
2258 adapter->nreads[i], adapter->nwrites[i]);
2259
2260 len += sprintf(page+len,
2261 "\tSectors Read = %lu, Sectors Written = %lu\n",
2262 adapter->nreadblocks[i], adapter->nwriteblocks[i]);
2263
2264 len += sprintf(page+len,
2265 "\tRead errors = %lu, Write errors = %lu\n\n",
2266 adapter->rd_errors[i], adapter->wr_errors[i]);
2267 }
2268 #else
2269 len += sprintf(page+len,
2270 "IO and error counters not compiled in driver.\n");
2271 #endif
2272
2273 *eof = 1;
2274
2275 return len;
2276 }
2277
2278
2279 /**
2280 * proc_read_mbox()
2281 * @page - buffer to write the data in
2282 * @start - where the actual data has been written in page
2283 * @offset - same meaning as the read system call
2284 * @count - same meaning as the read system call
2285 * @eof - set if no more data needs to be returned
2286 * @data - pointer to our soft state
2287 *
2288 * Display mailbox information for the last command issued. This information
2289 * is good for debugging.
2290 */
2291 static int
2292 proc_read_mbox(char *page, char **start, off_t offset, int count, int *eof,
2293 void *data)
2294 {
2295
2296 adapter_t *adapter = (adapter_t *)data;
2297 volatile mbox_t *mbox = adapter->mbox;
2298 int len = 0;
2299
2300 len = sprintf(page, "Contents of Mail Box Structure\n");
2301 len += sprintf(page+len, " Fw Command = 0x%02x\n",
2302 mbox->m_out.cmd);
2303 len += sprintf(page+len, " Cmd Sequence = 0x%02x\n",
2304 mbox->m_out.cmdid);
2305 len += sprintf(page+len, " No of Sectors= %04d\n",
2306 mbox->m_out.numsectors);
2307 len += sprintf(page+len, " LBA = 0x%02x\n",
2308 mbox->m_out.lba);
2309 len += sprintf(page+len, " DTA = 0x%08x\n",
2310 mbox->m_out.xferaddr);
2311 len += sprintf(page+len, " Logical Drive= 0x%02x\n",
2312 mbox->m_out.logdrv);
2313 len += sprintf(page+len, " No of SG Elmt= 0x%02x\n",
2314 mbox->m_out.numsgelements);
2315 len += sprintf(page+len, " Busy = %01x\n",
2316 mbox->m_in.busy);
2317 len += sprintf(page+len, " Status = 0x%02x\n",
2318 mbox->m_in.status);
2319
2320 *eof = 1;
2321
2322 return len;
2323 }
2324
2325
2326 /**
2327 * proc_rebuild_rate()
2328 * @page - buffer to write the data in
2329 * @start - where the actual data has been written in page
2330 * @offset - same meaning as the read system call
2331 * @count - same meaning as the read system call
2332 * @eof - set if no more data needs to be returned
2333 * @data - pointer to our soft state
2334 *
2335 * Display current rebuild rate
2336 */
2337 static int
2338 proc_rebuild_rate(char *page, char **start, off_t offset, int count, int *eof,
2339 void *data)
2340 {
2341 adapter_t *adapter = (adapter_t *)data;
2342 dma_addr_t dma_handle;
2343 caddr_t inquiry;
2344 struct pci_dev *pdev;
2345 int len = 0;
2346
2347 if( make_local_pdev(adapter, &pdev) != 0 ) {
2348 *eof = 1;
2349 return len;
2350 }
2351
2352 if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL ) {
2353 free_local_pdev(pdev);
2354 *eof = 1;
2355 return len;
2356 }
2357
2358 if( mega_adapinq(adapter, dma_handle) != 0 ) {
2359
2360 len = sprintf(page, "Adapter inquiry failed.\n");
2361
2362 printk(KERN_WARNING "megaraid: inquiry failed.\n");
2363
2364 mega_free_inquiry(inquiry, dma_handle, pdev);
2365
2366 free_local_pdev(pdev);
2367
2368 *eof = 1;
2369
2370 return len;
2371 }
2372
2373 if( adapter->flag & BOARD_40LD ) {
2374 len = sprintf(page, "Rebuild Rate: [%d%%]\n",
2375 ((mega_inquiry3 *)inquiry)->rebuild_rate);
2376 }
2377 else {
2378 len = sprintf(page, "Rebuild Rate: [%d%%]\n",
2379 ((mraid_ext_inquiry *)
2380 inquiry)->raid_inq.adapter_info.rebuild_rate);
2381 }
2382
2383
2384 mega_free_inquiry(inquiry, dma_handle, pdev);
2385
2386 free_local_pdev(pdev);
2387
2388 *eof = 1;
2389
2390 return len;
2391 }
2392
2393
2394 /**
2395 * proc_battery()
2396 * @page - buffer to write the data in
2397 * @start - where the actual data has been written in page
2398 * @offset - same meaning as the read system call
2399 * @count - same meaning as the read system call
2400 * @eof - set if no more data needs to be returned
2401 * @data - pointer to our soft state
2402 *
2403 * Display information about the battery module on the controller.
2404 */
2405 static int
2406 proc_battery(char *page, char **start, off_t offset, int count, int *eof,
2407 void *data)
2408 {
2409 adapter_t *adapter = (adapter_t *)data;
2410 dma_addr_t dma_handle;
2411 caddr_t inquiry;
2412 struct pci_dev *pdev;
2413 u8 battery_status = 0;
2414 char str[256];
2415 int len = 0;
2416
2417 if( make_local_pdev(adapter, &pdev) != 0 ) {
2418 *eof = 1;
2419 return len;
2420 }
2421
2422 if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL ) {
2423 free_local_pdev(pdev);
2424 *eof = 1;
2425 return len;
2426 }
2427
2428 if( mega_adapinq(adapter, dma_handle) != 0 ) {
2429
2430 len = sprintf(page, "Adapter inquiry failed.\n");
2431
2432 printk(KERN_WARNING "megaraid: inquiry failed.\n");
2433
2434 mega_free_inquiry(inquiry, dma_handle, pdev);
2435
2436 free_local_pdev(pdev);
2437
2438 *eof = 1;
2439
2440 return len;
2441 }
2442
2443 if( adapter->flag & BOARD_40LD ) {
2444 battery_status = ((mega_inquiry3 *)inquiry)->battery_status;
2445 }
2446 else {
2447 battery_status = ((mraid_ext_inquiry *)inquiry)->
2448 raid_inq.adapter_info.battery_status;
2449 }
2450
2451 /*
2452 * Decode the battery status
2453 */
2454 sprintf(str, "Battery Status:[%d]", battery_status);
2455
2456 if(battery_status == MEGA_BATT_CHARGE_DONE)
2457 strcat(str, " Charge Done");
2458
2459 if(battery_status & MEGA_BATT_MODULE_MISSING)
2460 strcat(str, " Module Missing");
2461
2462 if(battery_status & MEGA_BATT_LOW_VOLTAGE)
2463 strcat(str, " Low Voltage");
2464
2465 if(battery_status & MEGA_BATT_TEMP_HIGH)
2466 strcat(str, " Temperature High");
2467
2468 if(battery_status & MEGA_BATT_PACK_MISSING)
2469 strcat(str, " Pack Missing");
2470
2471 if(battery_status & MEGA_BATT_CHARGE_INPROG)
2472 strcat(str, " Charge In-progress");
2473
2474 if(battery_status & MEGA_BATT_CHARGE_FAIL)
2475 strcat(str, " Charge Fail");
2476
2477 if(battery_status & MEGA_BATT_CYCLES_EXCEEDED)
2478 strcat(str, " Cycles Exceeded");
2479
2480 len = sprintf(page, "%s\n", str);
2481
2482
2483 mega_free_inquiry(inquiry, dma_handle, pdev);
2484
2485 free_local_pdev(pdev);
2486
2487 *eof = 1;
2488
2489 return len;
2490 }
2491
2492
2493 /**
2494 * proc_pdrv_ch0()
2495 * @page - buffer to write the data in
2496 * @start - where the actual data has been written in page
2497 * @offset - same meaning as the read system call
2498 * @count - same meaning as the read system call
2499 * @eof - set if no more data needs to be returned
2500 * @data - pointer to our soft state
2501 *
2502 * Display information about the physical drives on physical channel 0.
2503 */
2504 static int
2505 proc_pdrv_ch0(char *page, char **start, off_t offset, int count, int *eof,
2506 void *data)
2507 {
2508 adapter_t *adapter = (adapter_t *)data;
2509
2510 *eof = 1;
2511
2512 return (proc_pdrv(adapter, page, 0));
2513 }
2514
2515
2516 /**
2517 * proc_pdrv_ch1()
2518 * @page - buffer to write the data in
2519 * @start - where the actual data has been written in page
2520 * @offset - same meaning as the read system call
2521 * @count - same meaning as the read system call
2522 * @eof - set if no more data needs to be returned
2523 * @data - pointer to our soft state
2524 *
2525 * Display information about the physical drives on physical channel 1.
2526 */
2527 static int
2528 proc_pdrv_ch1(char *page, char **start, off_t offset, int count, int *eof,
2529 void *data)
2530 {
2531 adapter_t *adapter = (adapter_t *)data;
2532
2533 *eof = 1;
2534
2535 return (proc_pdrv(adapter, page, 1));
2536 }
2537
2538
2539 /**
2540 * proc_pdrv_ch2()
2541 * @page - buffer to write the data in
2542 * @start - where the actual data has been written in page
2543 * @offset - same meaning as the read system call
2544 * @count - same meaning as the read system call
2545 * @eof - set if no more data needs to be returned
2546 * @data - pointer to our soft state
2547 *
2548 * Display information about the physical drives on physical channel 2.
2549 */
2550 static int
2551 proc_pdrv_ch2(char *page, char **start, off_t offset, int count, int *eof,
2552 void *data)
2553 {
2554 adapter_t *adapter = (adapter_t *)data;
2555
2556 *eof = 1;
2557
2558 return (proc_pdrv(adapter, page, 2));
2559 }
2560
2561
2562 /**
2563 * proc_pdrv_ch3()
2564 * @page - buffer to write the data in
2565 * @start - where the actual data has been written in page
2566 * @offset - same meaning as the read system call
2567 * @count - same meaning as the read system call
2568 * @eof - set if no more data needs to be returned
2569 * @data - pointer to our soft state
2570 *
2571 * Display information about the physical drives on physical channel 3.
2572 */
2573 static int
2574 proc_pdrv_ch3(char *page, char **start, off_t offset, int count, int *eof,
2575 void *data)
2576 {
2577 adapter_t *adapter = (adapter_t *)data;
2578
2579 *eof = 1;
2580
2581 return (proc_pdrv(adapter, page, 3));
2582 }
2583
2584
2585 /**
2586 * proc_pdrv()
2587 * @page - buffer to write the data in
2588 * @adapter - pointer to our soft state
2589 *
2590 * Display information about the physical drives.
2591 */
2592 static int
2593 proc_pdrv(adapter_t *adapter, char *page, int channel)
2594 {
2595 dma_addr_t dma_handle;
2596 char *scsi_inq;
2597 dma_addr_t scsi_inq_dma_handle;
2598 caddr_t inquiry;
2599 struct pci_dev *pdev;
2600 u8 *pdrv_state;
2601 u8 state;
2602 int tgt;
2603 int max_channels;
2604 int len = 0;
2605 char str[80];
2606 int i;
2607
2608 if( make_local_pdev(adapter, &pdev) != 0 ) {
2609 return len;
2610 }
2611
2612 if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL ) {
2613 goto free_pdev;
2614 }
2615
2616 if( mega_adapinq(adapter, dma_handle) != 0 ) {
2617 len = sprintf(page, "Adapter inquiry failed.\n");
2618
2619 printk(KERN_WARNING "megaraid: inquiry failed.\n");
2620
2621 goto free_inquiry;
2622 }
2623
2624
2625 scsi_inq = pci_alloc_consistent(pdev, 256, &scsi_inq_dma_handle);
2626
2627 if( scsi_inq == NULL ) {
2628 len = sprintf(page, "memory not available for scsi inq.\n");
2629
2630 goto free_inquiry;
2631 }
2632
2633 if( adapter->flag & BOARD_40LD ) {
2634 pdrv_state = ((mega_inquiry3 *)inquiry)->pdrv_state;
2635 }
2636 else {
2637 pdrv_state = ((mraid_ext_inquiry *)inquiry)->
2638 raid_inq.pdrv_info.pdrv_state;
2639 }
2640
2641 max_channels = adapter->product_info.nchannels;
2642
2643 if( channel >= max_channels ) {
2644 goto free_pci;
2645 }
2646
2647 for( tgt = 0; tgt <= MAX_TARGET; tgt++ ) {
2648
2649 i = channel*16 + tgt;
2650
2651 state = *(pdrv_state + i);
2652
2653 switch( state & 0x0F ) {
2654
2655 case PDRV_ONLINE:
2656 sprintf(str,
2657 "Channel:%2d Id:%2d State: Online",
2658 channel, tgt);
2659 break;
2660
2661 case PDRV_FAILED:
2662 sprintf(str,
2663 "Channel:%2d Id:%2d State: Failed",
2664 channel, tgt);
2665 break;
2666
2667 case PDRV_RBLD:
2668 sprintf(str,
2669 "Channel:%2d Id:%2d State: Rebuild",
2670 channel, tgt);
2671 break;
2672
2673 case PDRV_HOTSPARE:
2674 sprintf(str,
2675 "Channel:%2d Id:%2d State: Hot spare",
2676 channel, tgt);
2677 break;
2678
2679 default:
2680 sprintf(str,
2681 "Channel:%2d Id:%2d State: Un-configured",
2682 channel, tgt);
2683 break;
2684
2685 }
2686
2687 /*
2688 * This interface displays inquiries for disk drives
2689 * only. Inquries for logical drives and non-disk
2690 * devices are available through /proc/scsi/scsi
2691 */
2692 memset(scsi_inq, 0, 256);
2693 if( mega_internal_dev_inquiry(adapter, channel, tgt,
2694 scsi_inq_dma_handle) ||
2695 (scsi_inq[0] & 0x1F) != TYPE_DISK ) {
2696 continue;
2697 }
2698
2699 /*
2700 * Check for overflow. We print less than 240
2701 * characters for inquiry
2702 */
2703 if( (len + 240) >= PAGE_SIZE ) break;
2704
2705 len += sprintf(page+len, "%s.\n", str);
2706
2707 len += mega_print_inquiry(page+len, scsi_inq);
2708 }
2709
2710 free_pci:
2711 pci_free_consistent(pdev, 256, scsi_inq, scsi_inq_dma_handle);
2712 free_inquiry:
2713 mega_free_inquiry(inquiry, dma_handle, pdev);
2714 free_pdev:
2715 free_local_pdev(pdev);
2716
2717 return len;
2718 }
2719
2720
2721 /*
2722 * Display scsi inquiry
2723 */
2724 static int
2725 mega_print_inquiry(char *page, char *scsi_inq)
2726 {
2727 int len = 0;
2728 int i;
2729
2730 len = sprintf(page, " Vendor: ");
2731 for( i = 8; i < 16; i++ ) {
2732 len += sprintf(page+len, "%c", scsi_inq[i]);
2733 }
2734
2735 len += sprintf(page+len, " Model: ");
2736
2737 for( i = 16; i < 32; i++ ) {
2738 len += sprintf(page+len, "%c", scsi_inq[i]);
2739 }
2740
2741 len += sprintf(page+len, " Rev: ");
2742
2743 for( i = 32; i < 36; i++ ) {
2744 len += sprintf(page+len, "%c", scsi_inq[i]);
2745 }
2746
2747 len += sprintf(page+len, "\n");
2748
2749 i = scsi_inq[0] & 0x1f;
2750
2751 len += sprintf(page+len, " Type: %s ", scsi_device_type(i));
2752
2753 len += sprintf(page+len,
2754 " ANSI SCSI revision: %02x", scsi_inq[2] & 0x07);
2755
2756 if( (scsi_inq[2] & 0x07) == 1 && (scsi_inq[3] & 0x0f) == 1 )
2757 len += sprintf(page+len, " CCS\n");
2758 else
2759 len += sprintf(page+len, "\n");
2760
2761 return len;
2762 }
2763
2764
2765 /**
2766 * proc_rdrv_10()
2767 * @page - buffer to write the data in
2768 * @start - where the actual data has been written in page
2769 * @offset - same meaning as the read system call
2770 * @count - same meaning as the read system call
2771 * @eof - set if no more data needs to be returned
2772 * @data - pointer to our soft state
2773 *
2774 * Display real time information about the logical drives 0 through 9.
2775 */
2776 static int
2777 proc_rdrv_10(char *page, char **start, off_t offset, int count, int *eof,
2778 void *data)
2779 {
2780 adapter_t *adapter = (adapter_t *)data;
2781
2782 *eof = 1;
2783
2784 return (proc_rdrv(adapter, page, 0, 9));
2785 }
2786
2787
2788 /**
2789 * proc_rdrv_20()
2790 * @page - buffer to write the data in
2791 * @start - where the actual data has been written in page
2792 * @offset - same meaning as the read system call
2793 * @count - same meaning as the read system call
2794 * @eof - set if no more data needs to be returned
2795 * @data - pointer to our soft state
2796 *
2797 * Display real time information about the logical drives 0 through 9.
2798 */
2799 static int
2800 proc_rdrv_20(char *page, char **start, off_t offset, int count, int *eof,
2801 void *data)
2802 {
2803 adapter_t *adapter = (adapter_t *)data;
2804
2805 *eof = 1;
2806
2807 return (proc_rdrv(adapter, page, 10, 19));
2808 }
2809
2810
2811 /**
2812 * proc_rdrv_30()
2813 * @page - buffer to write the data in
2814 * @start - where the actual data has been written in page
2815 * @offset - same meaning as the read system call
2816 * @count - same meaning as the read system call
2817 * @eof - set if no more data needs to be returned
2818 * @data - pointer to our soft state
2819 *
2820 * Display real time information about the logical drives 0 through 9.
2821 */
2822 static int
2823 proc_rdrv_30(char *page, char **start, off_t offset, int count, int *eof,
2824 void *data)
2825 {
2826 adapter_t *adapter = (adapter_t *)data;
2827
2828 *eof = 1;
2829
2830 return (proc_rdrv(adapter, page, 20, 29));
2831 }
2832
2833
2834 /**
2835 * proc_rdrv_40()
2836 * @page - buffer to write the data in
2837 * @start - where the actual data has been written in page
2838 * @offset - same meaning as the read system call
2839 * @count - same meaning as the read system call
2840 * @eof - set if no more data needs to be returned
2841 * @data - pointer to our soft state
2842 *
2843 * Display real time information about the logical drives 0 through 9.
2844 */
2845 static int
2846 proc_rdrv_40(char *page, char **start, off_t offset, int count, int *eof,
2847 void *data)
2848 {
2849 adapter_t *adapter = (adapter_t *)data;
2850
2851 *eof = 1;
2852
2853 return (proc_rdrv(adapter, page, 30, 39));
2854 }
2855
2856
2857 /**
2858 * proc_rdrv()
2859 * @page - buffer to write the data in
2860 * @adapter - pointer to our soft state
2861 * @start - starting logical drive to display
2862 * @end - ending logical drive to display
2863 *
2864 * We do not print the inquiry information since its already available through
2865 * /proc/scsi/scsi interface
2866 */
2867 static int
2868 proc_rdrv(adapter_t *adapter, char *page, int start, int end )
2869 {
2870 dma_addr_t dma_handle;
2871 logdrv_param *lparam;
2872 megacmd_t mc;
2873 char *disk_array;
2874 dma_addr_t disk_array_dma_handle;
2875 caddr_t inquiry;
2876 struct pci_dev *pdev;
2877 u8 *rdrv_state;
2878 int num_ldrv;
2879 u32 array_sz;
2880 int len = 0;
2881 int i;
2882
2883 if( make_local_pdev(adapter, &pdev) != 0 ) {
2884 return len;
2885 }
2886
2887 if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL ) {
2888 free_local_pdev(pdev);
2889 return len;
2890 }
2891
2892 if( mega_adapinq(adapter, dma_handle) != 0 ) {
2893
2894 len = sprintf(page, "Adapter inquiry failed.\n");
2895
2896 printk(KERN_WARNING "megaraid: inquiry failed.\n");
2897
2898 mega_free_inquiry(inquiry, dma_handle, pdev);
2899
2900 free_local_pdev(pdev);
2901
2902 return len;
2903 }
2904
2905 memset(&mc, 0, sizeof(megacmd_t));
2906
2907 if( adapter->flag & BOARD_40LD ) {
2908 array_sz = sizeof(disk_array_40ld);
2909
2910 rdrv_state = ((mega_inquiry3 *)inquiry)->ldrv_state;
2911
2912 num_ldrv = ((mega_inquiry3 *)inquiry)->num_ldrv;
2913 }
2914 else {
2915 array_sz = sizeof(disk_array_8ld);
2916
2917 rdrv_state = ((mraid_ext_inquiry *)inquiry)->
2918 raid_inq.logdrv_info.ldrv_state;
2919
2920 num_ldrv = ((mraid_ext_inquiry *)inquiry)->
2921 raid_inq.logdrv_info.num_ldrv;
2922 }
2923
2924 disk_array = pci_alloc_consistent(pdev, array_sz,
2925 &disk_array_dma_handle);
2926
2927 if( disk_array == NULL ) {
2928 len = sprintf(page, "memory not available.\n");
2929
2930 mega_free_inquiry(inquiry, dma_handle, pdev);
2931
2932 free_local_pdev(pdev);
2933
2934 return len;
2935 }
2936
2937 mc.xferaddr = (u32)disk_array_dma_handle;
2938
2939 if( adapter->flag & BOARD_40LD ) {
2940 mc.cmd = FC_NEW_CONFIG;
2941 mc.opcode = OP_DCMD_READ_CONFIG;
2942
2943 if( mega_internal_command(adapter, &mc, NULL) ) {
2944
2945 len = sprintf(page, "40LD read config failed.\n");
2946
2947 mega_free_inquiry(inquiry, dma_handle, pdev);
2948
2949 pci_free_consistent(pdev, array_sz, disk_array,
2950 disk_array_dma_handle);
2951
2952 free_local_pdev(pdev);
2953
2954 return len;
2955 }
2956
2957 }
2958 else {
2959 mc.cmd = NEW_READ_CONFIG_8LD;
2960
2961 if( mega_internal_command(adapter, &mc, NULL) ) {
2962
2963 mc.cmd = READ_CONFIG_8LD;
2964
2965 if( mega_internal_command(adapter, &mc,
2966 NULL) ){
2967
2968 len = sprintf(page,
2969 "8LD read config failed.\n");
2970
2971 mega_free_inquiry(inquiry, dma_handle, pdev);
2972
2973 pci_free_consistent(pdev, array_sz,
2974 disk_array,
2975 disk_array_dma_handle);
2976
2977 free_local_pdev(pdev);
2978
2979 return len;
2980 }
2981 }
2982 }
2983
2984 for( i = start; i < ( (end+1 < num_ldrv) ? end+1 : num_ldrv ); i++ ) {
2985
2986 if( adapter->flag & BOARD_40LD ) {
2987 lparam =
2988 &((disk_array_40ld *)disk_array)->ldrv[i].lparam;
2989 }
2990 else {
2991 lparam =
2992 &((disk_array_8ld *)disk_array)->ldrv[i].lparam;
2993 }
2994
2995 /*
2996 * Check for overflow. We print less than 240 characters for
2997 * information about each logical drive.
2998 */
2999 if( (len + 240) >= PAGE_SIZE ) break;
3000
3001 len += sprintf(page+len, "Logical drive:%2d:, ", i);
3002
3003 switch( rdrv_state[i] & 0x0F ) {
3004 case RDRV_OFFLINE:
3005 len += sprintf(page+len, "state: offline");
3006 break;
3007
3008 case RDRV_DEGRADED:
3009 len += sprintf(page+len, "state: degraded");
3010 break;
3011
3012 case RDRV_OPTIMAL:
3013 len += sprintf(page+len, "state: optimal");
3014 break;
3015
3016 case RDRV_DELETED:
3017 len += sprintf(page+len, "state: deleted");
3018 break;
3019
3020 default:
3021 len += sprintf(page+len, "state: unknown");
3022 break;
3023 }
3024
3025 /*
3026 * Check if check consistency or initialization is going on
3027 * for this logical drive.
3028 */
3029 if( (rdrv_state[i] & 0xF0) == 0x20 ) {
3030 len += sprintf(page+len,
3031 ", check-consistency in progress");
3032 }
3033 else if( (rdrv_state[i] & 0xF0) == 0x10 ) {
3034 len += sprintf(page+len,
3035 ", initialization in progress");
3036 }
3037
3038 len += sprintf(page+len, "\n");
3039
3040 len += sprintf(page+len, "Span depth:%3d, ",
3041 lparam->span_depth);
3042
3043 len += sprintf(page+len, "RAID level:%3d, ",
3044 lparam->level);
3045
3046 len += sprintf(page+len, "Stripe size:%3d, ",
3047 lparam->stripe_sz ? lparam->stripe_sz/2: 128);
3048
3049 len += sprintf(page+len, "Row size:%3d\n",
3050 lparam->row_size);
3051
3052
3053 len += sprintf(page+len, "Read Policy: ");
3054
3055 switch(lparam->read_ahead) {
3056
3057 case NO_READ_AHEAD:
3058 len += sprintf(page+len, "No read ahead, ");
3059 break;
3060
3061 case READ_AHEAD:
3062 len += sprintf(page+len, "Read ahead, ");
3063 break;
3064
3065 case ADAP_READ_AHEAD:
3066 len += sprintf(page+len, "Adaptive, ");
3067 break;
3068
3069 }
3070
3071 len += sprintf(page+len, "Write Policy: ");
3072
3073 switch(lparam->write_mode) {
3074
3075 case WRMODE_WRITE_THRU:
3076 len += sprintf(page+len, "Write thru, ");
3077 break;
3078
3079 case WRMODE_WRITE_BACK:
3080 len += sprintf(page+len, "Write back, ");
3081 break;
3082 }
3083
3084 len += sprintf(page+len, "Cache Policy: ");
3085
3086 switch(lparam->direct_io) {
3087
3088 case CACHED_IO:
3089 len += sprintf(page+len, "Cached IO\n\n");
3090 break;
3091
3092 case DIRECT_IO:
3093 len += sprintf(page+len, "Direct IO\n\n");
3094 break;
3095 }
3096 }
3097
3098 mega_free_inquiry(inquiry, dma_handle, pdev);
3099
3100 pci_free_consistent(pdev, array_sz, disk_array,
3101 disk_array_dma_handle);
3102
3103 free_local_pdev(pdev);
3104
3105 return len;
3106 }
3107 #else
3108 static inline void mega_create_proc_entry(int index, struct proc_dir_entry *parent)
3109 {
3110 }
3111 #endif
3112
3113
3114 /**
3115 * megaraid_biosparam()
3116 *
3117 * Return the disk geometry for a particular disk
3118 */
3119 static int
3120 megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev,
3121 sector_t capacity, int geom[])
3122 {
3123 adapter_t *adapter;
3124 unsigned char *bh;
3125 int heads;
3126 int sectors;
3127 int cylinders;
3128 int rval;
3129
3130 /* Get pointer to host config structure */
3131 adapter = (adapter_t *)sdev->host->hostdata;
3132
3133 if (IS_RAID_CH(adapter, sdev->channel)) {
3134 /* Default heads (64) & sectors (32) */
3135 heads = 64;
3136 sectors = 32;
3137 cylinders = (ulong)capacity / (heads * sectors);
3138
3139 /*
3140 * Handle extended translation size for logical drives
3141 * > 1Gb
3142 */
3143 if ((ulong)capacity >= 0x200000) {
3144 heads = 255;
3145 sectors = 63;
3146 cylinders = (ulong)capacity / (heads * sectors);
3147 }
3148
3149 /* return result */
3150 geom[0] = heads;
3151 geom[1] = sectors;
3152 geom[2] = cylinders;
3153 }
3154 else {
3155 bh = scsi_bios_ptable(bdev);
3156
3157 if( bh ) {
3158 rval = scsi_partsize(bh, capacity,
3159 &geom[2], &geom[0], &geom[1]);
3160 kfree(bh);
3161 if( rval != -1 )
3162 return rval;
3163 }
3164
3165 printk(KERN_INFO
3166 "megaraid: invalid partition on this disk on channel %d\n",
3167 sdev->channel);
3168
3169 /* Default heads (64) & sectors (32) */
3170 heads = 64;
3171 sectors = 32;
3172 cylinders = (ulong)capacity / (heads * sectors);
3173
3174 /* Handle extended translation size for logical drives > 1Gb */
3175 if ((ulong)capacity >= 0x200000) {
3176 heads = 255;
3177 sectors = 63;
3178 cylinders = (ulong)capacity / (heads * sectors);
3179 }
3180
3181 /* return result */
3182 geom[0] = heads;
3183 geom[1] = sectors;
3184 geom[2] = cylinders;
3185 }
3186
3187 return 0;
3188 }
3189
3190 /**
3191 * mega_init_scb()
3192 * @adapter - pointer to our soft state
3193 *
3194 * Allocate memory for the various pointers in the scb structures:
3195 * scatter-gather list pointer, passthru and extended passthru structure
3196 * pointers.
3197 */
3198 static int
3199 mega_init_scb(adapter_t *adapter)
3200 {
3201 scb_t *scb;
3202 int i;
3203
3204 for( i = 0; i < adapter->max_cmds; i++ ) {
3205
3206 scb = &adapter->scb_list[i];
3207
3208 scb->sgl64 = NULL;
3209 scb->sgl = NULL;
3210 scb->pthru = NULL;
3211 scb->epthru = NULL;
3212 }
3213
3214 for( i = 0; i < adapter->max_cmds; i++ ) {
3215
3216 scb = &adapter->scb_list[i];
3217
3218 scb->idx = i;
3219
3220 scb->sgl64 = pci_alloc_consistent(adapter->dev,
3221 sizeof(mega_sgl64) * adapter->sglen,
3222 &scb->sgl_dma_addr);
3223
3224 scb->sgl = (mega_sglist *)scb->sgl64;
3225
3226 if( !scb->sgl ) {
3227 printk(KERN_WARNING "RAID: Can't allocate sglist.\n");
3228 mega_free_sgl(adapter);
3229 return -1;
3230 }
3231
3232 scb->pthru = pci_alloc_consistent(adapter->dev,
3233 sizeof(mega_passthru),
3234 &scb->pthru_dma_addr);
3235
3236 if( !scb->pthru ) {
3237 printk(KERN_WARNING "RAID: Can't allocate passthru.\n");
3238 mega_free_sgl(adapter);
3239 return -1;
3240 }
3241
3242 scb->epthru = pci_alloc_consistent(adapter->dev,
3243 sizeof(mega_ext_passthru),
3244 &scb->epthru_dma_addr);
3245
3246 if( !scb->epthru ) {
3247 printk(KERN_WARNING
3248 "Can't allocate extended passthru.\n");
3249 mega_free_sgl(adapter);
3250 return -1;
3251 }
3252
3253
3254 scb->dma_type = MEGA_DMA_TYPE_NONE;
3255
3256 /*
3257 * Link to free list
3258 * lock not required since we are loading the driver, so no
3259 * commands possible right now.
3260 */
3261 scb->state = SCB_FREE;
3262 scb->cmd = NULL;
3263 list_add(&scb->list, &adapter->free_list);
3264 }
3265
3266 return 0;
3267 }
3268
3269
3270 /**
3271 * megadev_open()
3272 * @inode - unused
3273 * @filep - unused
3274 *
3275 * Routines for the character/ioctl interface to the driver. Find out if this
3276 * is a valid open.
3277 */
3278 static int
3279 megadev_open (struct inode *inode, struct file *filep)
3280 {
3281 cycle_kernel_lock();
3282 /*
3283 * Only allow superuser to access private ioctl interface
3284 */
3285 if( !capable(CAP_SYS_ADMIN) ) return -EACCES;
3286
3287 return 0;
3288 }
3289
3290
3291 /**
3292 * megadev_ioctl()
3293 * @inode - Our device inode
3294 * @filep - unused
3295 * @cmd - ioctl command
3296 * @arg - user buffer
3297 *
3298 * ioctl entry point for our private ioctl interface. We move the data in from
3299 * the user space, prepare the command (if necessary, convert the old MIMD
3300 * ioctl to new ioctl command), and issue a synchronous command to the
3301 * controller.
3302 */
3303 static int
3304 megadev_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
3305 unsigned long arg)
3306 {
3307 adapter_t *adapter;
3308 nitioctl_t uioc;
3309 int adapno;
3310 int rval;
3311 mega_passthru __user *upthru; /* user address for passthru */
3312 mega_passthru *pthru; /* copy user passthru here */
3313 dma_addr_t pthru_dma_hndl;
3314 void *data = NULL; /* data to be transferred */
3315 dma_addr_t data_dma_hndl; /* dma handle for data xfer area */
3316 megacmd_t mc;
3317 megastat_t __user *ustats;
3318 int num_ldrv;
3319 u32 uxferaddr = 0;
3320 struct pci_dev *pdev;
3321
3322 ustats = NULL; /* avoid compilation warnings */
3323 num_ldrv = 0;
3324
3325 /*
3326 * Make sure only USCSICMD are issued through this interface.
3327 * MIMD application would still fire different command.
3328 */
3329 if( (_IOC_TYPE(cmd) != MEGAIOC_MAGIC) && (cmd != USCSICMD) ) {
3330 return -EINVAL;
3331 }
3332
3333 /*
3334 * Check and convert a possible MIMD command to NIT command.
3335 * mega_m_to_n() copies the data from the user space, so we do not
3336 * have to do it here.
3337 * NOTE: We will need some user address to copyout the data, therefore
3338 * the inteface layer will also provide us with the required user
3339 * addresses.
3340 */
3341 memset(&uioc, 0, sizeof(nitioctl_t));
3342 if( (rval = mega_m_to_n( (void __user *)arg, &uioc)) != 0 )
3343 return rval;
3344
3345
3346 switch( uioc.opcode ) {
3347
3348 case GET_DRIVER_VER:
3349 if( put_user(driver_ver, (u32 __user *)uioc.uioc_uaddr) )
3350 return (-EFAULT);
3351
3352 break;
3353
3354 case GET_N_ADAP:
3355 if( put_user(hba_count, (u32 __user *)uioc.uioc_uaddr) )
3356 return (-EFAULT);
3357
3358 /*
3359 * Shucks. MIMD interface returns a positive value for number
3360 * of adapters. TODO: Change it to return 0 when there is no
3361 * applicatio using mimd interface.
3362 */
3363 return hba_count;
3364
3365 case GET_ADAP_INFO:
3366
3367 /*
3368 * Which adapter
3369 */
3370 if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
3371 return (-ENODEV);
3372
3373 if( copy_to_user(uioc.uioc_uaddr, mcontroller+adapno,
3374 sizeof(struct mcontroller)) )
3375 return (-EFAULT);
3376 break;
3377
3378 #if MEGA_HAVE_STATS
3379
3380 case GET_STATS:
3381 /*
3382 * Which adapter
3383 */
3384 if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
3385 return (-ENODEV);
3386
3387 adapter = hba_soft_state[adapno];
3388
3389 ustats = uioc.uioc_uaddr;
3390
3391 if( copy_from_user(&num_ldrv, &ustats->num_ldrv, sizeof(int)) )
3392 return (-EFAULT);
3393
3394 /*
3395 * Check for the validity of the logical drive number
3396 */
3397 if( num_ldrv >= MAX_LOGICAL_DRIVES_40LD ) return -EINVAL;
3398
3399 if( copy_to_user(ustats->nreads, adapter->nreads,
3400 num_ldrv*sizeof(u32)) )
3401 return -EFAULT;
3402
3403 if( copy_to_user(ustats->nreadblocks, adapter->nreadblocks,
3404 num_ldrv*sizeof(u32)) )
3405 return -EFAULT;
3406
3407 if( copy_to_user(ustats->nwrites, adapter->nwrites,
3408 num_ldrv*sizeof(u32)) )
3409 return -EFAULT;
3410
3411 if( copy_to_user(ustats->nwriteblocks, adapter->nwriteblocks,
3412 num_ldrv*sizeof(u32)) )
3413 return -EFAULT;
3414
3415 if( copy_to_user(ustats->rd_errors, adapter->rd_errors,
3416 num_ldrv*sizeof(u32)) )
3417 return -EFAULT;
3418
3419 if( copy_to_user(ustats->wr_errors, adapter->wr_errors,
3420 num_ldrv*sizeof(u32)) )
3421 return -EFAULT;
3422
3423 return 0;
3424
3425 #endif
3426 case MBOX_CMD:
3427
3428 /*
3429 * Which adapter
3430 */
3431 if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
3432 return (-ENODEV);
3433
3434 adapter = hba_soft_state[adapno];
3435
3436 /*
3437 * Deletion of logical drive is a special case. The adapter
3438 * should be quiescent before this command is issued.
3439 */
3440 if( uioc.uioc_rmbox[0] == FC_DEL_LOGDRV &&
3441 uioc.uioc_rmbox[2] == OP_DEL_LOGDRV ) {
3442
3443 /*
3444 * Do we support this feature
3445 */
3446 if( !adapter->support_random_del ) {
3447 printk(KERN_WARNING "megaraid: logdrv ");
3448 printk("delete on non-supporting F/W.\n");
3449
3450 return (-EINVAL);
3451 }
3452
3453 rval = mega_del_logdrv( adapter, uioc.uioc_rmbox[3] );
3454
3455 if( rval == 0 ) {
3456 memset(&mc, 0, sizeof(megacmd_t));
3457
3458 mc.status = rval;
3459
3460 rval = mega_n_to_m((void __user *)arg, &mc);
3461 }
3462
3463 return rval;
3464 }
3465 /*
3466 * This interface only support the regular passthru commands.
3467 * Reject extended passthru and 64-bit passthru
3468 */
3469 if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU64 ||
3470 uioc.uioc_rmbox[0] == MEGA_MBOXCMD_EXTPTHRU ) {
3471
3472 printk(KERN_WARNING "megaraid: rejected passthru.\n");
3473
3474 return (-EINVAL);
3475 }
3476
3477 /*
3478 * For all internal commands, the buffer must be allocated in
3479 * <4GB address range
3480 */
3481 if( make_local_pdev(adapter, &pdev) != 0 )
3482 return -EIO;
3483
3484 /* Is it a passthru command or a DCMD */
3485 if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU ) {
3486 /* Passthru commands */
3487
3488 pthru = pci_alloc_consistent(pdev,
3489 sizeof(mega_passthru),
3490 &pthru_dma_hndl);
3491
3492 if( pthru == NULL ) {
3493 free_local_pdev(pdev);
3494 return (-ENOMEM);
3495 }
3496
3497 /*
3498 * The user passthru structure
3499 */
3500 upthru = (mega_passthru __user *)(unsigned long)MBOX(uioc)->xferaddr;
3501
3502 /*
3503 * Copy in the user passthru here.
3504 */
3505 if( copy_from_user(pthru, upthru,
3506 sizeof(mega_passthru)) ) {
3507
3508 pci_free_consistent(pdev,
3509 sizeof(mega_passthru), pthru,
3510 pthru_dma_hndl);
3511
3512 free_local_pdev(pdev);
3513
3514 return (-EFAULT);
3515 }
3516
3517 /*
3518 * Is there a data transfer
3519 */
3520 if( pthru->dataxferlen ) {
3521 data = pci_alloc_consistent(pdev,
3522 pthru->dataxferlen,
3523 &data_dma_hndl);
3524
3525 if( data == NULL ) {
3526 pci_free_consistent(pdev,
3527 sizeof(mega_passthru),
3528 pthru,
3529 pthru_dma_hndl);
3530
3531 free_local_pdev(pdev);
3532
3533 return (-ENOMEM);
3534 }
3535
3536 /*
3537 * Save the user address and point the kernel
3538 * address at just allocated memory
3539 */
3540 uxferaddr = pthru->dataxferaddr;
3541 pthru->dataxferaddr = data_dma_hndl;
3542 }
3543
3544
3545 /*
3546 * Is data coming down-stream
3547 */
3548 if( pthru->dataxferlen && (uioc.flags & UIOC_WR) ) {
3549 /*
3550 * Get the user data
3551 */
3552 if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
3553 pthru->dataxferlen) ) {
3554 rval = (-EFAULT);
3555 goto freemem_and_return;
3556 }
3557 }
3558
3559 memset(&mc, 0, sizeof(megacmd_t));
3560
3561 mc.cmd = MEGA_MBOXCMD_PASSTHRU;
3562 mc.xferaddr = (u32)pthru_dma_hndl;
3563
3564 /*
3565 * Issue the command
3566 */
3567 mega_internal_command(adapter, &mc, pthru);
3568
3569 rval = mega_n_to_m((void __user *)arg, &mc);
3570
3571 if( rval ) goto freemem_and_return;
3572
3573
3574 /*
3575 * Is data going up-stream
3576 */
3577 if( pthru->dataxferlen && (uioc.flags & UIOC_RD) ) {
3578 if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
3579 pthru->dataxferlen) ) {
3580 rval = (-EFAULT);
3581 }
3582 }
3583
3584 /*
3585 * Send the request sense data also, irrespective of
3586 * whether the user has asked for it or not.
3587 */
3588 if (copy_to_user(upthru->reqsensearea,
3589 pthru->reqsensearea, 14))
3590 rval = -EFAULT;
3591
3592 freemem_and_return:
3593 if( pthru->dataxferlen ) {
3594 pci_free_consistent(pdev,
3595 pthru->dataxferlen, data,
3596 data_dma_hndl);
3597 }
3598
3599 pci_free_consistent(pdev, sizeof(mega_passthru),
3600 pthru, pthru_dma_hndl);
3601
3602 free_local_pdev(pdev);
3603
3604 return rval;
3605 }
3606 else {
3607 /* DCMD commands */
3608
3609 /*
3610 * Is there a data transfer
3611 */
3612 if( uioc.xferlen ) {
3613 data = pci_alloc_consistent(pdev,
3614 uioc.xferlen, &data_dma_hndl);
3615
3616 if( data == NULL ) {
3617 free_local_pdev(pdev);
3618 return (-ENOMEM);
3619 }
3620
3621 uxferaddr = MBOX(uioc)->xferaddr;
3622 }
3623
3624 /*
3625 * Is data coming down-stream
3626 */
3627 if( uioc.xferlen && (uioc.flags & UIOC_WR) ) {
3628 /*
3629 * Get the user data
3630 */
3631 if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
3632 uioc.xferlen) ) {
3633
3634 pci_free_consistent(pdev,
3635 uioc.xferlen,
3636 data, data_dma_hndl);
3637
3638 free_local_pdev(pdev);
3639
3640 return (-EFAULT);
3641 }
3642 }
3643
3644 memcpy(&mc, MBOX(uioc), sizeof(megacmd_t));
3645
3646 mc.xferaddr = (u32)data_dma_hndl;
3647
3648 /*
3649 * Issue the command
3650 */
3651 mega_internal_command(adapter, &mc, NULL);
3652
3653 rval = mega_n_to_m((void __user *)arg, &mc);
3654
3655 if( rval ) {
3656 if( uioc.xferlen ) {
3657 pci_free_consistent(pdev,
3658 uioc.xferlen, data,
3659 data_dma_hndl);
3660 }
3661
3662 free_local_pdev(pdev);
3663
3664 return rval;
3665 }
3666
3667 /*
3668 * Is data going up-stream
3669 */
3670 if( uioc.xferlen && (uioc.flags & UIOC_RD) ) {
3671 if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
3672 uioc.xferlen) ) {
3673
3674 rval = (-EFAULT);
3675 }
3676 }
3677
3678 if( uioc.xferlen ) {
3679 pci_free_consistent(pdev,
3680 uioc.xferlen, data,
3681 data_dma_hndl);
3682 }
3683
3684 free_local_pdev(pdev);
3685
3686 return rval;
3687 }
3688
3689 default:
3690 return (-EINVAL);
3691 }
3692
3693 return 0;
3694 }
3695
3696 /**
3697 * mega_m_to_n()
3698 * @arg - user address
3699 * @uioc - new ioctl structure
3700 *
3701 * A thin layer to convert older mimd interface ioctl structure to NIT ioctl
3702 * structure
3703 *
3704 * Converts the older mimd ioctl structure to newer NIT structure
3705 */
3706 static int
3707 mega_m_to_n(void __user *arg, nitioctl_t *uioc)
3708 {
3709 struct uioctl_t uioc_mimd;
3710 char signature[8] = {0};
3711 u8 opcode;
3712 u8 subopcode;
3713
3714
3715 /*
3716 * check is the application conforms to NIT. We do not have to do much
3717 * in that case.
3718 * We exploit the fact that the signature is stored in the very
3719 * begining of the structure.
3720 */
3721
3722 if( copy_from_user(signature, arg, 7) )
3723 return (-EFAULT);
3724
3725 if( memcmp(signature, "MEGANIT", 7) == 0 ) {
3726
3727 /*
3728 * NOTE NOTE: The nit ioctl is still under flux because of
3729 * change of mailbox definition, in HPE. No applications yet
3730 * use this interface and let's not have applications use this
3731 * interface till the new specifitions are in place.
3732 */
3733 return -EINVAL;
3734 #if 0
3735 if( copy_from_user(uioc, arg, sizeof(nitioctl_t)) )
3736 return (-EFAULT);
3737 return 0;
3738 #endif
3739 }
3740
3741 /*
3742 * Else assume we have mimd uioctl_t as arg. Convert to nitioctl_t
3743 *
3744 * Get the user ioctl structure
3745 */
3746 if( copy_from_user(&uioc_mimd, arg, sizeof(struct uioctl_t)) )
3747 return (-EFAULT);
3748
3749
3750 /*
3751 * Get the opcode and subopcode for the commands
3752 */
3753 opcode = uioc_mimd.ui.fcs.opcode;
3754 subopcode = uioc_mimd.ui.fcs.subopcode;
3755
3756 switch (opcode) {
3757 case 0x82:
3758
3759 switch (subopcode) {
3760
3761 case MEGAIOC_QDRVRVER: /* Query driver version */
3762 uioc->opcode = GET_DRIVER_VER;
3763 uioc->uioc_uaddr = uioc_mimd.data;
3764 break;
3765
3766 case MEGAIOC_QNADAP: /* Get # of adapters */
3767 uioc->opcode = GET_N_ADAP;
3768 uioc->uioc_uaddr = uioc_mimd.data;
3769 break;
3770
3771 case MEGAIOC_QADAPINFO: /* Get adapter information */
3772 uioc->opcode = GET_ADAP_INFO;
3773 uioc->adapno = uioc_mimd.ui.fcs.adapno;
3774 uioc->uioc_uaddr = uioc_mimd.data;
3775 break;
3776
3777 default:
3778 return(-EINVAL);
3779 }
3780
3781 break;
3782
3783
3784 case 0x81:
3785
3786 uioc->opcode = MBOX_CMD;
3787 uioc->adapno = uioc_mimd.ui.fcs.adapno;
3788
3789 memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
3790
3791 uioc->xferlen = uioc_mimd.ui.fcs.length;
3792
3793 if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
3794 if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
3795
3796 break;
3797
3798 case 0x80:
3799
3800 uioc->opcode = MBOX_CMD;
3801 uioc->adapno = uioc_mimd.ui.fcs.adapno;
3802
3803 memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
3804
3805 /*
3806 * Choose the xferlen bigger of input and output data
3807 */
3808 uioc->xferlen = uioc_mimd.outlen > uioc_mimd.inlen ?
3809 uioc_mimd.outlen : uioc_mimd.inlen;
3810
3811 if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
3812 if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
3813
3814 break;
3815
3816 default:
3817 return (-EINVAL);
3818
3819 }
3820
3821 return 0;
3822 }
3823
3824 /*
3825 * mega_n_to_m()
3826 * @arg - user address
3827 * @mc - mailbox command
3828 *
3829 * Updates the status information to the application, depending on application
3830 * conforms to older mimd ioctl interface or newer NIT ioctl interface
3831 */
3832 static int
3833 mega_n_to_m(void __user *arg, megacmd_t *mc)
3834 {
3835 nitioctl_t __user *uiocp;
3836 megacmd_t __user *umc;
3837 mega_passthru __user *upthru;
3838 struct uioctl_t __user *uioc_mimd;
3839 char signature[8] = {0};
3840
3841 /*
3842 * check is the application conforms to NIT.
3843 */
3844 if( copy_from_user(signature, arg, 7) )
3845 return -EFAULT;
3846
3847 if( memcmp(signature, "MEGANIT", 7) == 0 ) {
3848
3849 uiocp = arg;
3850
3851 if( put_user(mc->status, (u8 __user *)&MBOX_P(uiocp)->status) )
3852 return (-EFAULT);
3853
3854 if( mc->