Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * Interface to the 93C46/56 serial EEPROM that is used to store BIOS
  3  * settings for the aic7xxx based adaptec SCSI controllers.  It can
  4  * also be used for 93C26 and 93C06 serial EEPROMS.
  5  *
  6  * Copyright (c) 1994, 1995, 2000 Justin T. Gibbs.
  7  * All rights reserved.
  8  *
  9  * Redistribution and use in source and binary forms, with or without
 10  * modification, are permitted provided that the following conditions
 11  * are met:
 12  * 1. Redistributions of source code must retain the above copyright
 13  *    notice, this list of conditions, and the following disclaimer,
 14  *    without modification.
 15  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 16  *    substantially similar to the "NO WARRANTY" disclaimer below
 17  *    ("Disclaimer") and any redistribution must be conditioned upon
 18  *    including a substantially similar Disclaimer requirement for further
 19  *    binary redistribution.
 20  * 3. Neither the names of the above-listed copyright holders nor the names
 21  *    of any contributors may be used to endorse or promote products derived
 22  *    from this software without specific prior written permission.
 23  *
 24  * Alternatively, this software may be distributed under the terms of the
 25  * GNU General Public License ("GPL") version 2 as published by the Free
 26  * Software Foundation.
 27  *
 28  * NO WARRANTY
 29  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 30  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 31  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 32  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 33  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 34  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 35  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 36  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 37  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 38  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 39  * POSSIBILITY OF SUCH DAMAGES.
 40  *
 41  * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_93cx6.h#12 $
 42  *
 43  * $FreeBSD$
 44  */
 45 #ifndef _AIC7XXX_93CX6_H_
 46 #define _AIC7XXX_93CX6_H_
 47 
 48 typedef enum {
 49         C46 = 6,
 50         C56_66 = 8
 51 } seeprom_chip_t;
 52 
 53 struct seeprom_descriptor {
 54         struct ahc_softc *sd_ahc;
 55         u_int sd_control_offset;
 56         u_int sd_status_offset;
 57         u_int sd_dataout_offset;
 58         seeprom_chip_t sd_chip;
 59         uint16_t sd_MS;
 60         uint16_t sd_RDY;
 61         uint16_t sd_CS;
 62         uint16_t sd_CK;
 63         uint16_t sd_DO;
 64         uint16_t sd_DI;
 65 };
 66 
 67 /*
 68  * This function will read count 16-bit words from the serial EEPROM and
 69  * return their value in buf.  The port address of the aic7xxx serial EEPROM
 70  * control register is passed in as offset.  The following parameters are
 71  * also passed in:
 72  *
 73  *   CS  - Chip select
 74  *   CK  - Clock
 75  *   DO  - Data out
 76  *   DI  - Data in
 77  *   RDY - SEEPROM ready
 78  *   MS  - Memory port mode select
 79  *
 80  *  A failed read attempt returns 0, and a successful read returns 1.
 81  */
 82 
 83 #define SEEPROM_INB(sd) \
 84         ahc_inb(sd->sd_ahc, sd->sd_control_offset)
 85 #define SEEPROM_OUTB(sd, value)                                 \
 86 do {                                                            \
 87         ahc_outb(sd->sd_ahc, sd->sd_control_offset, value);     \
 88         ahc_flush_device_writes(sd->sd_ahc);                    \
 89 } while(0)
 90 
 91 #define SEEPROM_STATUS_INB(sd) \
 92         ahc_inb(sd->sd_ahc, sd->sd_status_offset)
 93 #define SEEPROM_DATA_INB(sd) \
 94         ahc_inb(sd->sd_ahc, sd->sd_dataout_offset)
 95 
 96 int ahc_read_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
 97                      u_int start_addr, u_int count);
 98 int ahc_write_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
 99                       u_int start_addr, u_int count);
100 int ahc_verify_cksum(struct seeprom_config *sc);
101 
102 #endif /* _AIC7XXX_93CX6_H_ */
103 
  This page was automatically generated by the LXR engine.