1 /*
2 * Core routines and tables shareable across OS platforms.
3 *
4 * Copyright (c) 1994-2002 Justin T. Gibbs.
5 * Copyright (c) 2000-2003 Adaptec Inc.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification.
14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
15 * substantially similar to the "NO WARRANTY" disclaimer below
16 * ("Disclaimer") and any redistribution must be conditioned upon
17 * including a substantially similar Disclaimer requirement for further
18 * binary redistribution.
19 * 3. Neither the names of the above-listed copyright holders nor the names
20 * of any contributors may be used to endorse or promote products derived
21 * from this software without specific prior written permission.
22 *
23 * Alternatively, this software may be distributed under the terms of the
24 * GNU General Public License ("GPL") version 2 as published by the Free
25 * Software Foundation.
26 *
27 * NO WARRANTY
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
38 * POSSIBILITY OF SUCH DAMAGES.
39 *
40 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#250 $
41 */
42
43 #ifdef __linux__
44 #include "aic79xx_osm.h"
45 #include "aic79xx_inline.h"
46 #include "aicasm/aicasm_insformat.h"
47 #else
48 #include <dev/aic7xxx/aic79xx_osm.h>
49 #include <dev/aic7xxx/aic79xx_inline.h>
50 #include <dev/aic7xxx/aicasm/aicasm_insformat.h>
51 #endif
52
53
54 /***************************** Lookup Tables **********************************/
55 static char *ahd_chip_names[] =
56 {
57 "NONE",
58 "aic7901",
59 "aic7902",
60 "aic7901A"
61 };
62 static const u_int num_chip_names = ARRAY_SIZE(ahd_chip_names);
63
64 /*
65 * Hardware error codes.
66 */
67 struct ahd_hard_error_entry {
68 uint8_t errno;
69 char *errmesg;
70 };
71
72 static struct ahd_hard_error_entry ahd_hard_errors[] = {
73 { DSCTMOUT, "Discard Timer has timed out" },
74 { ILLOPCODE, "Illegal Opcode in sequencer program" },
75 { SQPARERR, "Sequencer Parity Error" },
76 { DPARERR, "Data-path Parity Error" },
77 { MPARERR, "Scratch or SCB Memory Parity Error" },
78 { CIOPARERR, "CIOBUS Parity Error" },
79 };
80 static const u_int num_errors = ARRAY_SIZE(ahd_hard_errors);
81
82 static struct ahd_phase_table_entry ahd_phase_table[] =
83 {
84 { P_DATAOUT, MSG_NOOP, "in Data-out phase" },
85 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" },
86 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" },
87 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" },
88 { P_COMMAND, MSG_NOOP, "in Command phase" },
89 { P_MESGOUT, MSG_NOOP, "in Message-out phase" },
90 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" },
91 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" },
92 { P_BUSFREE, MSG_NOOP, "while idle" },
93 { 0, MSG_NOOP, "in unknown phase" }
94 };
95
96 /*
97 * In most cases we only wish to itterate over real phases, so
98 * exclude the last element from the count.
99 */
100 static const u_int num_phases = ARRAY_SIZE(ahd_phase_table) - 1;
101
102 /* Our Sequencer Program */
103 #include "aic79xx_seq.h"
104
105 /**************************** Function Declarations ***************************/
106 static void ahd_handle_transmission_error(struct ahd_softc *ahd);
107 static void ahd_handle_lqiphase_error(struct ahd_softc *ahd,
108 u_int lqistat1);
109 static int ahd_handle_pkt_busfree(struct ahd_softc *ahd,
110 u_int busfreetime);
111 static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd);
112 static void ahd_handle_proto_violation(struct ahd_softc *ahd);
113 static void ahd_force_renegotiation(struct ahd_softc *ahd,
114 struct ahd_devinfo *devinfo);
115
116 static struct ahd_tmode_tstate*
117 ahd_alloc_tstate(struct ahd_softc *ahd,
118 u_int scsi_id, char channel);
119 #ifdef AHD_TARGET_MODE
120 static void ahd_free_tstate(struct ahd_softc *ahd,
121 u_int scsi_id, char channel, int force);
122 #endif
123 static void ahd_devlimited_syncrate(struct ahd_softc *ahd,
124 struct ahd_initiator_tinfo *,
125 u_int *period,
126 u_int *ppr_options,
127 role_t role);
128 static void ahd_update_neg_table(struct ahd_softc *ahd,
129 struct ahd_devinfo *devinfo,
130 struct ahd_transinfo *tinfo);
131 static void ahd_update_pending_scbs(struct ahd_softc *ahd);
132 static void ahd_fetch_devinfo(struct ahd_softc *ahd,
133 struct ahd_devinfo *devinfo);
134 static void ahd_scb_devinfo(struct ahd_softc *ahd,
135 struct ahd_devinfo *devinfo,
136 struct scb *scb);
137 static void ahd_setup_initiator_msgout(struct ahd_softc *ahd,
138 struct ahd_devinfo *devinfo,
139 struct scb *scb);
140 static void ahd_build_transfer_msg(struct ahd_softc *ahd,
141 struct ahd_devinfo *devinfo);
142 static void ahd_construct_sdtr(struct ahd_softc *ahd,
143 struct ahd_devinfo *devinfo,
144 u_int period, u_int offset);
145 static void ahd_construct_wdtr(struct ahd_softc *ahd,
146 struct ahd_devinfo *devinfo,
147 u_int bus_width);
148 static void ahd_construct_ppr(struct ahd_softc *ahd,
149 struct ahd_devinfo *devinfo,
150 u_int period, u_int offset,
151 u_int bus_width, u_int ppr_options);
152 static void ahd_clear_msg_state(struct ahd_softc *ahd);
153 static void ahd_handle_message_phase(struct ahd_softc *ahd);
154 typedef enum {
155 AHDMSG_1B,
156 AHDMSG_2B,
157 AHDMSG_EXT
158 } ahd_msgtype;
159 static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type,
160 u_int msgval, int full);
161 static int ahd_parse_msg(struct ahd_softc *ahd,
162 struct ahd_devinfo *devinfo);
163 static int ahd_handle_msg_reject(struct ahd_softc *ahd,
164 struct ahd_devinfo *devinfo);
165 static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd,
166 struct ahd_devinfo *devinfo);
167 static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd);
168 static void ahd_handle_devreset(struct ahd_softc *ahd,
169 struct ahd_devinfo *devinfo,
170 u_int lun, cam_status status,
171 char *message, int verbose_level);
172 #ifdef AHD_TARGET_MODE
173 static void ahd_setup_target_msgin(struct ahd_softc *ahd,
174 struct ahd_devinfo *devinfo,
175 struct scb *scb);
176 #endif
177
178 static u_int ahd_sglist_size(struct ahd_softc *ahd);
179 static u_int ahd_sglist_allocsize(struct ahd_softc *ahd);
180 static bus_dmamap_callback_t
181 ahd_dmamap_cb;
182 static void ahd_initialize_hscbs(struct ahd_softc *ahd);
183 static int ahd_init_scbdata(struct ahd_softc *ahd);
184 static void ahd_fini_scbdata(struct ahd_softc *ahd);
185 static void ahd_setup_iocell_workaround(struct ahd_softc *ahd);
186 static void ahd_iocell_first_selection(struct ahd_softc *ahd);
187 static void ahd_add_col_list(struct ahd_softc *ahd,
188 struct scb *scb, u_int col_idx);
189 static void ahd_rem_col_list(struct ahd_softc *ahd,
190 struct scb *scb);
191 static void ahd_chip_init(struct ahd_softc *ahd);
192 static void ahd_qinfifo_requeue(struct ahd_softc *ahd,
193 struct scb *prev_scb,
194 struct scb *scb);
195 static int ahd_qinfifo_count(struct ahd_softc *ahd);
196 static int ahd_search_scb_list(struct ahd_softc *ahd, int target,
197 char channel, int lun, u_int tag,
198 role_t role, uint32_t status,
199 ahd_search_action action,
200 u_int *list_head, u_int *list_tail,
201 u_int tid);
202 static void ahd_stitch_tid_list(struct ahd_softc *ahd,
203 u_int tid_prev, u_int tid_cur,
204 u_int tid_next);
205 static void ahd_add_scb_to_free_list(struct ahd_softc *ahd,
206 u_int scbid);
207 static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid,
208 u_int prev, u_int next, u_int tid);
209 static void ahd_reset_current_bus(struct ahd_softc *ahd);
210 static ahd_callback_t ahd_stat_timer;
211 #ifdef AHD_DUMP_SEQ
212 static void ahd_dumpseq(struct ahd_softc *ahd);
213 #endif
214 static void ahd_loadseq(struct ahd_softc *ahd);
215 static int ahd_check_patch(struct ahd_softc *ahd,
216 struct patch **start_patch,
217 u_int start_instr, u_int *skip_addr);
218 static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd,
219 u_int address);
220 static void ahd_download_instr(struct ahd_softc *ahd,
221 u_int instrptr, uint8_t *dconsts);
222 static int ahd_probe_stack_size(struct ahd_softc *ahd);
223 static int ahd_scb_active_in_fifo(struct ahd_softc *ahd,
224 struct scb *scb);
225 static void ahd_run_data_fifo(struct ahd_softc *ahd,
226 struct scb *scb);
227
228 #ifdef AHD_TARGET_MODE
229 static void ahd_queue_lstate_event(struct ahd_softc *ahd,
230 struct ahd_tmode_lstate *lstate,
231 u_int initiator_id,
232 u_int event_type,
233 u_int event_arg);
234 static void ahd_update_scsiid(struct ahd_softc *ahd,
235 u_int targid_mask);
236 static int ahd_handle_target_cmd(struct ahd_softc *ahd,
237 struct target_cmd *cmd);
238 #endif
239
240 static int ahd_abort_scbs(struct ahd_softc *ahd, int target,
241 char channel, int lun, u_int tag,
242 role_t role, uint32_t status);
243 static void ahd_alloc_scbs(struct ahd_softc *ahd);
244 static void ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl,
245 u_int scbid);
246 static void ahd_calc_residual(struct ahd_softc *ahd,
247 struct scb *scb);
248 static void ahd_clear_critical_section(struct ahd_softc *ahd);
249 static void ahd_clear_intstat(struct ahd_softc *ahd);
250 static void ahd_enable_coalescing(struct ahd_softc *ahd,
251 int enable);
252 static u_int ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl);
253 static void ahd_freeze_devq(struct ahd_softc *ahd,
254 struct scb *scb);
255 static void ahd_handle_scb_status(struct ahd_softc *ahd,
256 struct scb *scb);
257 static struct ahd_phase_table_entry* ahd_lookup_phase_entry(int phase);
258 static void ahd_shutdown(void *arg);
259 static void ahd_update_coalescing_values(struct ahd_softc *ahd,
260 u_int timer,
261 u_int maxcmds,
262 u_int mincmds);
263 static int ahd_verify_vpd_cksum(struct vpd_config *vpd);
264 static int ahd_wait_seeprom(struct ahd_softc *ahd);
265 static int ahd_match_scb(struct ahd_softc *ahd, struct scb *scb,
266 int target, char channel, int lun,
267 u_int tag, role_t role);
268
269 /******************************** Private Inlines *****************************/
270
271 static __inline void
272 ahd_assert_atn(struct ahd_softc *ahd)
273 {
274 ahd_outb(ahd, SCSISIGO, ATNO);
275 }
276
277 /*
278 * Determine if the current connection has a packetized
279 * agreement. This does not necessarily mean that we
280 * are currently in a packetized transfer. We could
281 * just as easily be sending or receiving a message.
282 */
283 static __inline int
284 ahd_currently_packetized(struct ahd_softc *ahd)
285 {
286 ahd_mode_state saved_modes;
287 int packetized;
288
289 saved_modes = ahd_save_modes(ahd);
290 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) {
291 /*
292 * The packetized bit refers to the last
293 * connection, not the current one. Check
294 * for non-zero LQISTATE instead.
295 */
296 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
297 packetized = ahd_inb(ahd, LQISTATE) != 0;
298 } else {
299 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
300 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED;
301 }
302 ahd_restore_modes(ahd, saved_modes);
303 return (packetized);
304 }
305
306 static __inline int
307 ahd_set_active_fifo(struct ahd_softc *ahd)
308 {
309 u_int active_fifo;
310
311 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
312 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO;
313 switch (active_fifo) {
314 case 0:
315 case 1:
316 ahd_set_modes(ahd, active_fifo, active_fifo);
317 return (1);
318 default:
319 return (0);
320 }
321 }
322
323 static __inline void
324 ahd_unbusy_tcl(struct ahd_softc *ahd, u_int tcl)
325 {
326 ahd_busy_tcl(ahd, tcl, SCB_LIST_NULL);
327 }
328
329 /*
330 * Determine whether the sequencer reported a residual
331 * for this SCB/transaction.
332 */
333 static __inline void
334 ahd_update_residual(struct ahd_softc *ahd, struct scb *scb)
335 {
336 uint32_t sgptr;
337
338 sgptr = ahd_le32toh(scb->hscb->sgptr);
339 if ((sgptr & SG_STATUS_VALID) != 0)
340 ahd_calc_residual(ahd, scb);
341 }
342
343 static __inline void
344 ahd_complete_scb(struct ahd_softc *ahd, struct scb *scb)
345 {
346 uint32_t sgptr;
347
348 sgptr = ahd_le32toh(scb->hscb->sgptr);
349 if ((sgptr & SG_STATUS_VALID) != 0)
350 ahd_handle_scb_status(ahd, scb);
351 else
352 ahd_done(ahd, scb);
353 }
354
355
356 /************************* Sequencer Execution Control ************************/
357 /*
358 * Restart the sequencer program from address zero
359 */
360 static void
361 ahd_restart(struct ahd_softc *ahd)
362 {
363
364 ahd_pause(ahd);
365
366 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
367
368 /* No more pending messages */
369 ahd_clear_msg_state(ahd);
370 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */
371 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */
372 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET);
373 ahd_outb(ahd, SEQINTCTL, 0);
374 ahd_outb(ahd, LASTPHASE, P_BUSFREE);
375 ahd_outb(ahd, SEQ_FLAGS, 0);
376 ahd_outb(ahd, SAVED_SCSIID, 0xFF);
377 ahd_outb(ahd, SAVED_LUN, 0xFF);
378
379 /*
380 * Ensure that the sequencer's idea of TQINPOS
381 * matches our own. The sequencer increments TQINPOS
382 * only after it sees a DMA complete and a reset could
383 * occur before the increment leaving the kernel to believe
384 * the command arrived but the sequencer to not.
385 */
386 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext);
387
388 /* Always allow reselection */
389 ahd_outb(ahd, SCSISEQ1,
390 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP));
391 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
392
393 /*
394 * Clear any pending sequencer interrupt. It is no
395 * longer relevant since we're resetting the Program
396 * Counter.
397 */
398 ahd_outb(ahd, CLRINT, CLRSEQINT);
399
400 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
401 ahd_unpause(ahd);
402 }
403
404 static void
405 ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo)
406 {
407 ahd_mode_state saved_modes;
408
409 #ifdef AHD_DEBUG
410 if ((ahd_debug & AHD_SHOW_FIFOS) != 0)
411 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo);
412 #endif
413 saved_modes = ahd_save_modes(ahd);
414 ahd_set_modes(ahd, fifo, fifo);
415 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
416 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
417 ahd_outb(ahd, CCSGCTL, CCSGRESET);
418 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
419 ahd_outb(ahd, SG_STATE, 0);
420 ahd_restore_modes(ahd, saved_modes);
421 }
422
423 /************************* Input/Output Queues ********************************/
424 /*
425 * Flush and completed commands that are sitting in the command
426 * complete queues down on the chip but have yet to be dma'ed back up.
427 */
428 static void
429 ahd_flush_qoutfifo(struct ahd_softc *ahd)
430 {
431 struct scb *scb;
432 ahd_mode_state saved_modes;
433 u_int saved_scbptr;
434 u_int ccscbctl;
435 u_int scbid;
436 u_int next_scbid;
437
438 saved_modes = ahd_save_modes(ahd);
439
440 /*
441 * Flush the good status FIFO for completed packetized commands.
442 */
443 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
444 saved_scbptr = ahd_get_scbptr(ahd);
445 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) {
446 u_int fifo_mode;
447 u_int i;
448
449 scbid = ahd_inw(ahd, GSFIFO);
450 scb = ahd_lookup_scb(ahd, scbid);
451 if (scb == NULL) {
452 printf("%s: Warning - GSFIFO SCB %d invalid\n",
453 ahd_name(ahd), scbid);
454 continue;
455 }
456 /*
457 * Determine if this transaction is still active in
458 * any FIFO. If it is, we must flush that FIFO to
459 * the host before completing the command.
460 */
461 fifo_mode = 0;
462 rescan_fifos:
463 for (i = 0; i < 2; i++) {
464 /* Toggle to the other mode. */
465 fifo_mode ^= 1;
466 ahd_set_modes(ahd, fifo_mode, fifo_mode);
467
468 if (ahd_scb_active_in_fifo(ahd, scb) == 0)
469 continue;
470
471 ahd_run_data_fifo(ahd, scb);
472
473 /*
474 * Running this FIFO may cause a CFG4DATA for
475 * this same transaction to assert in the other
476 * FIFO or a new snapshot SAVEPTRS interrupt
477 * in this FIFO. Even running a FIFO may not
478 * clear the transaction if we are still waiting
479 * for data to drain to the host. We must loop
480 * until the transaction is not active in either
481 * FIFO just to be sure. Reset our loop counter
482 * so we will visit both FIFOs again before
483 * declaring this transaction finished. We
484 * also delay a bit so that status has a chance
485 * to change before we look at this FIFO again.
486 */
487 ahd_delay(200);
488 goto rescan_fifos;
489 }
490 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
491 ahd_set_scbptr(ahd, scbid);
492 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0
493 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0
494 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR)
495 & SG_LIST_NULL) != 0)) {
496 u_int comp_head;
497
498 /*
499 * The transfer completed with a residual.
500 * Place this SCB on the complete DMA list
501 * so that we update our in-core copy of the
502 * SCB before completing the command.
503 */
504 ahd_outb(ahd, SCB_SCSI_STATUS, 0);
505 ahd_outb(ahd, SCB_SGPTR,
506 ahd_inb_scbram(ahd, SCB_SGPTR)
507 | SG_STATUS_VALID);
508 ahd_outw(ahd, SCB_TAG, scbid);
509 ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL);
510 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
511 if (SCBID_IS_NULL(comp_head)) {
512 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid);
513 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid);
514 } else {
515 u_int tail;
516
517 tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL);
518 ahd_set_scbptr(ahd, tail);
519 ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid);
520 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid);
521 ahd_set_scbptr(ahd, scbid);
522 }
523 } else
524 ahd_complete_scb(ahd, scb);
525 }
526 ahd_set_scbptr(ahd, saved_scbptr);
527
528 /*
529 * Setup for command channel portion of flush.
530 */
531 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
532
533 /*
534 * Wait for any inprogress DMA to complete and clear DMA state
535 * if this if for an SCB in the qinfifo.
536 */
537 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) {
538
539 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) {
540 if ((ccscbctl & ARRDONE) != 0)
541 break;
542 } else if ((ccscbctl & CCSCBDONE) != 0)
543 break;
544 ahd_delay(200);
545 }
546 /*
547 * We leave the sequencer to cleanup in the case of DMA's to
548 * update the qoutfifo. In all other cases (DMA's to the
549 * chip or a push of an SCB from the COMPLETE_DMA_SCB list),
550 * we disable the DMA engine so that the sequencer will not
551 * attempt to handle the DMA completion.
552 */
553 if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0)
554 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN));
555
556 /*
557 * Complete any SCBs that just finished
558 * being DMA'ed into the qoutfifo.
559 */
560 ahd_run_qoutfifo(ahd);
561
562 saved_scbptr = ahd_get_scbptr(ahd);
563 /*
564 * Manually update/complete any completed SCBs that are waiting to be
565 * DMA'ed back up to the host.
566 */
567 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
568 while (!SCBID_IS_NULL(scbid)) {
569 uint8_t *hscb_ptr;
570 u_int i;
571
572 ahd_set_scbptr(ahd, scbid);
573 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
574 scb = ahd_lookup_scb(ahd, scbid);
575 if (scb == NULL) {
576 printf("%s: Warning - DMA-up and complete "
577 "SCB %d invalid\n", ahd_name(ahd), scbid);
578 continue;
579 }
580 hscb_ptr = (uint8_t *)scb->hscb;
581 for (i = 0; i < sizeof(struct hardware_scb); i++)
582 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i);
583
584 ahd_complete_scb(ahd, scb);
585 scbid = next_scbid;
586 }
587 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL);
588 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL);
589
590 scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD);
591 while (!SCBID_IS_NULL(scbid)) {
592
593 ahd_set_scbptr(ahd, scbid);
594 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
595 scb = ahd_lookup_scb(ahd, scbid);
596 if (scb == NULL) {
597 printf("%s: Warning - Complete Qfrz SCB %d invalid\n",
598 ahd_name(ahd), scbid);
599 continue;
600 }
601
602 ahd_complete_scb(ahd, scb);
603 scbid = next_scbid;
604 }
605 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL);
606
607 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD);
608 while (!SCBID_IS_NULL(scbid)) {
609
610 ahd_set_scbptr(ahd, scbid);
611 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
612 scb = ahd_lookup_scb(ahd, scbid);
613 if (scb == NULL) {
614 printf("%s: Warning - Complete SCB %d invalid\n",
615 ahd_name(ahd), scbid);
616 continue;
617 }
618
619 ahd_complete_scb(ahd, scb);
620 scbid = next_scbid;
621 }
622 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL);
623
624 /*
625 * Restore state.
626 */
627 ahd_set_scbptr(ahd, saved_scbptr);
628 ahd_restore_modes(ahd, saved_modes);
629 ahd->flags |= AHD_UPDATE_PEND_CMDS;
630 }
631
632 /*
633 * Determine if an SCB for a packetized transaction
634 * is active in a FIFO.
635 */
636 static int
637 ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb)
638 {
639
640 /*
641 * The FIFO is only active for our transaction if
642 * the SCBPTR matches the SCB's ID and the firmware
643 * has installed a handler for the FIFO or we have
644 * a pending SAVEPTRS or CFG4DATA interrupt.
645 */
646 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb)
647 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0
648 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0))
649 return (0);
650
651 return (1);
652 }
653
654 /*
655 * Run a data fifo to completion for a transaction we know
656 * has completed across the SCSI bus (good status has been
657 * received). We are already set to the correct FIFO mode
658 * on entry to this routine.
659 *
660 * This function attempts to operate exactly as the firmware
661 * would when running this FIFO. Care must be taken to update
662 * this routine any time the firmware's FIFO algorithm is
663 * changed.
664 */
665 static void
666 ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb)
667 {
668 u_int seqintsrc;
669
670 seqintsrc = ahd_inb(ahd, SEQINTSRC);
671 if ((seqintsrc & CFG4DATA) != 0) {
672 uint32_t datacnt;
673 uint32_t sgptr;
674
675 /*
676 * Clear full residual flag.
677 */
678 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID;
679 ahd_outb(ahd, SCB_SGPTR, sgptr);
680
681 /*
682 * Load datacnt and address.
683 */
684 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT);
685 if ((datacnt & AHD_DMA_LAST_SEG) != 0) {
686 sgptr |= LAST_SEG;
687 ahd_outb(ahd, SG_STATE, 0);
688 } else
689 ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
690 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR));
691 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK);
692 ahd_outb(ahd, SG_CACHE_PRE, sgptr);
693 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);
694
695 /*
696 * Initialize Residual Fields.
697 */
698 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24);
699 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK);
700
701 /*
702 * Mark the SCB as having a FIFO in use.
703 */
704 ahd_outb(ahd, SCB_FIFO_USE_COUNT,
705 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1);
706
707 /*
708 * Install a "fake" handler for this FIFO.
709 */
710 ahd_outw(ahd, LONGJMP_ADDR, 0);
711
712 /*
713 * Notify the hardware that we have satisfied
714 * this sequencer interrupt.
715 */
716 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA);
717 } else if ((seqintsrc & SAVEPTRS) != 0) {
718 uint32_t sgptr;
719 uint32_t resid;
720
721 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) {
722 /*
723 * Snapshot Save Pointers. All that
724 * is necessary to clear the snapshot
725 * is a CLRCHN.
726 */
727 goto clrchn;
728 }
729
730 /*
731 * Disable S/G fetch so the DMA engine
732 * is available to future users.
733 */
734 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
735 ahd_outb(ahd, CCSGCTL, 0);
736 ahd_outb(ahd, SG_STATE, 0);
737
738 /*
739 * Flush the data FIFO. Strickly only
740 * necessary for Rev A parts.
741 */
742 ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH);
743
744 /*
745 * Calculate residual.
746 */
747 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
748 resid = ahd_inl(ahd, SHCNT);
749 resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24;
750 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid);
751 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) {
752 /*
753 * Must back up to the correct S/G element.
754 * Typically this just means resetting our
755 * low byte to the offset in the SG_CACHE,
756 * but if we wrapped, we have to correct
757 * the other bytes of the sgptr too.
758 */
759 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0
760 && (sgptr & 0x80) == 0)
761 sgptr -= 0x100;
762 sgptr &= ~0xFF;
763 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW)
764 & SG_ADDR_MASK;
765 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
766 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0);
767 } else if ((resid & AHD_SG_LEN_MASK) == 0) {
768 ahd_outb(ahd, SCB_RESIDUAL_SGPTR,
769 sgptr | SG_LIST_NULL);
770 }
771 /*
772 * Save Pointers.
773 */
774 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR));
775 ahd_outl(ahd, SCB_DATACNT, resid);
776 ahd_outl(ahd, SCB_SGPTR, sgptr);
777 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS);
778 ahd_outb(ahd, SEQIMODE,
779 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS);
780 /*
781 * If the data is to the SCSI bus, we are
782 * done, otherwise wait for FIFOEMP.
783 */
784 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0)
785 goto clrchn;
786 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) {
787 uint32_t sgptr;
788 uint64_t data_addr;
789 uint32_t data_len;
790 u_int dfcntrl;
791
792 /*
793 * Disable S/G fetch so the DMA engine
794 * is available to future users. We won't
795 * be using the DMA engine to load segments.
796 */
797 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) {
798 ahd_outb(ahd, CCSGCTL, 0);
799 ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
800 }
801
802 /*
803 * Wait for the DMA engine to notice that the
804 * host transfer is enabled and that there is
805 * space in the S/G FIFO for new segments before
806 * loading more segments.
807 */
808 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0
809 && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) {
810
811 /*
812 * Determine the offset of the next S/G
813 * element to load.
814 */
815 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
816 sgptr &= SG_PTR_MASK;
817 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
818 struct ahd_dma64_seg *sg;
819
820 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
821 data_addr = sg->addr;
822 data_len = sg->len;
823 sgptr += sizeof(*sg);
824 } else {
825 struct ahd_dma_seg *sg;
826
827 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
828 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK;
829 data_addr <<= 8;
830 data_addr |= sg->addr;
831 data_len = sg->len;
832 sgptr += sizeof(*sg);
833 }
834
835 /*
836 * Update residual information.
837 */
838 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24);
839 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
840
841 /*
842 * Load the S/G.
843 */
844 if (data_len & AHD_DMA_LAST_SEG) {
845 sgptr |= LAST_SEG;
846 ahd_outb(ahd, SG_STATE, 0);
847 }
848 ahd_outq(ahd, HADDR, data_addr);
849 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK);
850 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF);
851
852 /*
853 * Advertise the segment to the hardware.
854 */
855 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN;
856 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) {
857 /*
858 * Use SCSIENWRDIS so that SCSIEN
859 * is never modified by this
860 * operation.
861 */
862 dfcntrl |= SCSIENWRDIS;
863 }
864 ahd_outb(ahd, DFCNTRL, dfcntrl);
865 }
866 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) {
867
868 /*
869 * Transfer completed to the end of SG list
870 * and has flushed to the host.
871 */
872 ahd_outb(ahd, SCB_SGPTR,
873 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL);
874 goto clrchn;
875 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) {
876 clrchn:
877 /*
878 * Clear any handler for this FIFO, decrement
879 * the FIFO use count for the SCB, and release
880 * the FIFO.
881 */
882 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
883 ahd_outb(ahd, SCB_FIFO_USE_COUNT,
884 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1);
885 ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
886 }
887 }
888
889 /*
890 * Look for entries in the QoutFIFO that have completed.
891 * The valid_tag completion field indicates the validity
892 * of the entry - the valid value toggles each time through
893 * the queue. We use the sg_status field in the completion
894 * entry to avoid referencing the hscb if the completion
895 * occurred with no errors and no residual. sg_status is
896 * a copy of the first byte (little endian) of the sgptr
897 * hscb field.
898 */
899 void
900 ahd_run_qoutfifo(struct ahd_softc *ahd)
901 {
902 struct ahd_completion *completion;
903 struct scb *scb;
904 u_int scb_index;
905
906 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0)
907 panic("ahd_run_qoutfifo recursion");
908 ahd->flags |= AHD_RUNNING_QOUTFIFO;
909 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD);
910 for (;;) {
911 completion = &ahd->qoutfifo[ahd->qoutfifonext];
912
913 if (completion->valid_tag != ahd->qoutfifonext_valid_tag)
914 break;
915
916 scb_index = ahd_le16toh(completion->tag);
917 scb = ahd_lookup_scb(ahd, scb_index);
918 if (scb == NULL) {
919 printf("%s: WARNING no command for scb %d "
920 "(cmdcmplt)\nQOUTPOS = %d\n",
921 ahd_name(ahd), scb_index,
922 ahd->qoutfifonext);
923 ahd_dump_card_state(ahd);
924 } else if ((completion->sg_status & SG_STATUS_VALID) != 0) {
925 ahd_handle_scb_status(ahd, scb);
926 } else {
927 ahd_done(ahd, scb);
928 }
929
930 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1);
931 if (ahd->qoutfifonext == 0)
932 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID;
933 }
934 ahd->flags &= ~AHD_RUNNING_QOUTFIFO;
935 }
936
937 /************************* Interrupt Handling *********************************/
938 void
939 ahd_handle_hwerrint(struct ahd_softc *ahd)
940 {
941 /*
942 * Some catastrophic hardware error has occurred.
943 * Print it for the user and disable the controller.
944 */
945 int i;
946 int error;
947
948 error = ahd_inb(ahd, ERROR);
949 for (i = 0; i < num_errors; i++) {
950 if ((error & ahd_hard_errors[i].errno) != 0)
951 printf("%s: hwerrint, %s\n",
952 ahd_name(ahd), ahd_hard_errors[i].errmesg);
953 }
954
955 ahd_dump_card_state(ahd);
956 panic("BRKADRINT");
957
958 /* Tell everyone that this HBA is no longer available */
959 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
960 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN,
961 CAM_NO_HBA);
962
963 /* Tell the system that this controller has gone away. */
964 ahd_free(ahd);
965 }
966
967 #ifdef AHD_DEBUG
968 static void
969 ahd_dump_sglist(struct scb *scb)
970 {
971 int i;
972
973 if (scb->sg_count > 0) {
974 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) {
975 struct ahd_dma64_seg *sg_list;
976
977 sg_list = (struct ahd_dma64_seg*)scb->sg_list;
978 for (i = 0; i < scb->sg_count; i++) {
979 uint64_t addr;
980 uint32_t len;
981
982 addr = ahd_le64toh(sg_list[i].addr);
983 len = ahd_le32toh(sg_list[i].len);
984 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n",
985 i,
986 (uint32_t)((addr >> 32) & 0xFFFFFFFF),
987 (uint32_t)(addr & 0xFFFFFFFF),
988 sg_list[i].len & AHD_SG_LEN_MASK,
989 (sg_list[i].len & AHD_DMA_LAST_SEG)
990 ? " Last" : "");
991 }
992 } else {
993 struct ahd_dma_seg *sg_list;
994
995 sg_list = (struct ahd_dma_seg*)scb->sg_list;
996 for (i = 0; i < scb->sg_count; i++) {
997 uint32_t len;
998
999 len = ahd_le32toh(sg_list[i].len);
1000 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n",
1001 i,
1002 (len & AHD_SG_HIGH_ADDR_MASK) >> 24,
1003 ahd_le32toh(sg_list[i].addr),
1004 len & AHD_SG_LEN_MASK,
1005 len & AHD_DMA_LAST_SEG ? " Last" : "");
1006 }
1007 }
1008 }
1009 }
1010 #endif /* AHD_DEBUG */
1011
1012 void
1013 ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
1014 {
1015 u_int seqintcode;
1016
1017 /*
1018 * Save the sequencer interrupt code and clear the SEQINT
1019 * bit. We will unpause the sequencer, if appropriate,
1020 * after servicing the request.
1021 */
1022 seqintcode = ahd_inb(ahd, SEQINTCODE);
1023 ahd_outb(ahd, CLRINT, CLRSEQINT);
1024 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
1025 /*
1026 * Unpause the sequencer and let it clear
1027 * SEQINT by writing NO_SEQINT to it. This
1028 * will cause the sequencer to be paused again,
1029 * which is the expected state of this routine.
1030 */
1031 ahd_unpause(ahd);
1032 while (!ahd_is_paused(ahd))
1033 ;
1034 ahd_outb(ahd, CLRINT, CLRSEQINT);
1035 }
1036 ahd_update_modes(ahd);
1037 #ifdef AHD_DEBUG
1038 if ((ahd_debug & AHD_SHOW_MISC) != 0)
1039 printf("%s: Handle Seqint Called for code %d\n",
1040 ahd_name(ahd), seqintcode);
1041 #endif
1042 switch (seqintcode) {
1043 case ENTERING_NONPACK:
1044 {
1045 struct scb *scb;
1046 u_int scbid;
1047
1048 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
1049 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
1050 scbid = ahd_get_scbptr(ahd);
1051 scb = ahd_lookup_scb(ahd, scbid);
1052 if (scb == NULL) {
1053 /*
1054 * Somehow need to know if this
1055 * is from a selection or reselection.
1056 * From that, we can determine target
1057 * ID so we at least have an I_T nexus.
1058 */
1059 } else {
1060 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
1061 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun);
1062 ahd_outb(ahd, SEQ_FLAGS, 0x0);
1063 }
1064 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0
1065 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
1066 /*
1067 * Phase change after read stream with
1068 * CRC error with P0 asserted on last
1069 * packet.
1070 */
1071 #ifdef AHD_DEBUG
1072 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
1073 printf("%s: Assuming LQIPHASE_NLQ with "
1074 "P0 assertion\n", ahd_name(ahd));
1075 #endif
1076 }
1077 #ifdef AHD_DEBUG
1078 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
1079 printf("%s: Entering NONPACK\n", ahd_name(ahd));
1080 #endif
1081 break;
1082 }
1083 case INVALID_SEQINT:
1084 printf("%s: Invalid Sequencer interrupt occurred, "
1085 "resetting channel.\n",
1086 ahd_name(ahd));
1087 #ifdef AHD_DEBUG
1088 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
1089 ahd_dump_card_state(ahd);
1090 #endif
1091 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1092 break;
1093 case STATUS_OVERRUN:
1094 {
1095 struct scb *scb;
1096 u_int scbid;
1097
1098 scbid = ahd_get_scbptr(ahd);
1099 scb = ahd_lookup_scb(ahd, scbid);
1100 if (scb != NULL)
1101 ahd_print_path(ahd, scb);
1102 else
1103 printf("%s: ", ahd_name(ahd));
1104 printf("SCB %d Packetized Status Overrun", scbid);
1105 ahd_dump_card_state(ahd);
1106 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1107 break;
1108 }
1109 case CFG4ISTAT_INTR:
1110 {
1111 struct scb *scb;
1112 u_int scbid;
1113
1114 scbid = ahd_get_scbptr(ahd);
1115 scb = ahd_lookup_scb(ahd, scbid);
1116 if (scb == NULL) {
1117 ahd_dump_card_state(ahd);
1118 printf("CFG4ISTAT: Free SCB %d referenced", scbid);
1119 panic("For safety");
1120 }
1121 ahd_outq(ahd, HADDR, scb->sense_busaddr);
1122 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE);
1123 ahd_outb(ahd, HCNT + 2, 0);
1124 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG);
1125 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);
1126 break;
1127 }
1128 case ILLEGAL_PHASE:
1129 {
1130 u_int bus_phase;
1131
1132 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1133 printf("%s: ILLEGAL_PHASE 0x%x\n",
1134 ahd_name(ahd), bus_phase);
1135
1136 switch (bus_phase) {
1137 case P_DATAOUT:
1138 case P_DATAIN:
1139 case P_DATAOUT_DT:
1140 case P_DATAIN_DT:
1141 case P_MESGOUT:
1142 case P_STATUS:
1143 case P_MESGIN:
1144 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1145 printf("%s: Issued Bus Reset.\n", ahd_name(ahd));
1146 break;
1147 case P_COMMAND:
1148 {
1149 struct ahd_devinfo devinfo;
1150 struct scb *scb;
1151 struct ahd_initiator_tinfo *targ_info;
1152 struct ahd_tmode_tstate *tstate;
1153 struct ahd_transinfo *tinfo;
1154 u_int scbid;
1155
1156 /*
1157 * If a target takes us into the command phase
1158 * assume that it has been externally reset and
1159 * has thus lost our previous packetized negotiation
1160 * agreement. Since we have not sent an identify
1161 * message and may not have fully qualified the
1162 * connection, we change our command to TUR, assert
1163 * ATN and ABORT the task when we go to message in
1164 * phase. The OSM will see the REQUEUE_REQUEST
1165 * status and retry the command.
1166 */
1167 scbid = ahd_get_scbptr(ahd);
1168 scb = ahd_lookup_scb(ahd, scbid);
1169 if (scb == NULL) {
1170 printf("Invalid phase with no valid SCB. "
1171 "Resetting bus.\n");
1172 ahd_reset_channel(ahd, 'A',
1173 /*Initiate Reset*/TRUE);
1174 break;
1175 }
1176 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb),
1177 SCB_GET_TARGET(ahd, scb),
1178 SCB_GET_LUN(scb),
1179 SCB_GET_CHANNEL(ahd, scb),
1180 ROLE_INITIATOR);
1181 targ_info = ahd_fetch_transinfo(ahd,
1182 devinfo.channel,
1183 devinfo.our_scsiid,
1184 devinfo.target,
1185 &tstate);
1186 tinfo = &targ_info->curr;
1187 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
1188 AHD_TRANS_ACTIVE, /*paused*/TRUE);
1189 ahd_set_syncrate(ahd, &devinfo, /*period*/0,
1190 /*offset*/0, /*ppr_options*/0,
1191 AHD_TRANS_ACTIVE, /*paused*/TRUE);
1192 /* Hand-craft TUR command */
1193 ahd_outb(ahd, SCB_CDB_STORE, 0);
1194 ahd_outb(ahd, SCB_CDB_STORE+1, 0);
1195 ahd_outb(ahd, SCB_CDB_STORE+2, 0);
1196 ahd_outb(ahd, SCB_CDB_STORE+3, 0);
1197 ahd_outb(ahd, SCB_CDB_STORE+4, 0);
1198 ahd_outb(ahd, SCB_CDB_STORE+5, 0);
1199 ahd_outb(ahd, SCB_CDB_LEN, 6);
1200 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE);
1201 scb->hscb->control |= MK_MESSAGE;
1202 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control);
1203 ahd_outb(ahd, MSG_OUT, HOST_MSG);
1204 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
1205 /*
1206 * The lun is 0, regardless of the SCB's lun
1207 * as we have not sent an identify message.
1208 */
1209 ahd_outb(ahd, SAVED_LUN, 0);
1210 ahd_outb(ahd, SEQ_FLAGS, 0);
1211 ahd_assert_atn(ahd);
1212 scb->flags &= ~SCB_PACKETIZED;
1213 scb->flags |= SCB_ABORT|SCB_EXTERNAL_RESET;
1214 ahd_freeze_devq(ahd, scb);
1215 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
1216 ahd_freeze_scb(scb);
1217
1218 /* Notify XPT */
1219 ahd_send_async(ahd, devinfo.channel, devinfo.target,
1220 CAM_LUN_WILDCARD, AC_SENT_BDR);
1221
1222 /*
1223 * Allow the sequencer to continue with
1224 * non-pack processing.
1225 */
1226 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1227 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT);
1228 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
1229 ahd_outb(ahd, CLRLQOINT1, 0);
1230 }
1231 #ifdef AHD_DEBUG
1232 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1233 ahd_print_path(ahd, scb);
1234 printf("Unexpected command phase from "
1235 "packetized target\n");
1236 }
1237 #endif
1238 break;
1239 }
1240 }
1241 break;
1242 }
1243 case CFG4OVERRUN:
1244 {
1245 struct scb *scb;
1246 u_int scb_index;
1247
1248 #ifdef AHD_DEBUG
1249 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1250 printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd),
1251 ahd_inb(ahd, MODE_PTR));
1252 }
1253 #endif
1254 scb_index = ahd_get_scbptr(ahd);
1255 scb = ahd_lookup_scb(ahd, scb_index);
1256 if (scb == NULL) {
1257 /*
1258 * Attempt to transfer to an SCB that is
1259 * not outstanding.
1260 */
1261 ahd_assert_atn(ahd);
1262 ahd_outb(ahd, MSG_OUT, HOST_MSG);
1263 ahd->msgout_buf[0] = MSG_ABORT_TASK;
1264 ahd->msgout_len = 1;
1265 ahd->msgout_index = 0;
1266 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
1267 /*
1268 * Clear status received flag to prevent any
1269 * attempt to complete this bogus SCB.
1270 */
1271 ahd_outb(ahd, SCB_CONTROL,
1272 ahd_inb_scbram(ahd, SCB_CONTROL)
1273 & ~STATUS_RCVD);
1274 }
1275 break;
1276 }
1277 case DUMP_CARD_STATE:
1278 {
1279 ahd_dump_card_state(ahd);
1280 break;
1281 }
1282 case PDATA_REINIT:
1283 {
1284 #ifdef AHD_DEBUG
1285 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1286 printf("%s: PDATA_REINIT - DFCNTRL = 0x%x "
1287 "SG_CACHE_SHADOW = 0x%x\n",
1288 ahd_name(ahd), ahd_inb(ahd, DFCNTRL),
1289 ahd_inb(ahd, SG_CACHE_SHADOW));
1290 }
1291 #endif
1292 ahd_reinitialize_dataptrs(ahd);
1293 break;
1294 }
1295 case HOST_MSG_LOOP:
1296 {
1297 struct ahd_devinfo devinfo;
1298
1299 /*
1300 * The sequencer has encountered a message phase
1301 * that requires host assistance for completion.
1302 * While handling the message phase(s), we will be
1303 * notified by the sequencer after each byte is
1304 * transfered so we can track bus phase changes.
1305 *
1306 * If this is the first time we've seen a HOST_MSG_LOOP
1307 * interrupt, initialize the state of the host message
1308 * loop.
1309 */
1310 ahd_fetch_devinfo(ahd, &devinfo);
1311 if (ahd->msg_type == MSG_TYPE_NONE) {
1312 struct scb *scb;
1313 u_int scb_index;
1314 u_int bus_phase;
1315
1316 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1317 if (bus_phase != P_MESGIN
1318 && bus_phase != P_MESGOUT) {
1319 printf("ahd_intr: HOST_MSG_LOOP bad "
1320 "phase 0x%x\n", bus_phase);
1321 /*
1322 * Probably transitioned to bus free before
1323 * we got here. Just punt the message.
1324 */
1325 ahd_dump_card_state(ahd);
1326 ahd_clear_intstat(ahd);
1327 ahd_restart(ahd);
1328 return;
1329 }
1330
1331 scb_index = ahd_get_scbptr(ahd);
1332 scb = ahd_lookup_scb(ahd, scb_index);
1333 if (devinfo.role == ROLE_INITIATOR) {
1334 if (bus_phase == P_MESGOUT)
1335 ahd_setup_initiator_msgout(ahd,
1336 &devinfo,
1337 scb);
1338 else {
1339 ahd->msg_type =
1340 MSG_TYPE_INITIATOR_MSGIN;
1341 ahd->msgin_index = 0;
1342 }
1343 }
1344 #ifdef AHD_TARGET_MODE
1345 else {
1346 if (bus_phase == P_MESGOUT) {
1347 ahd->msg_type =
1348 MSG_TYPE_TARGET_MSGOUT;
1349 ahd->msgin_index = 0;
1350 }
1351 else
1352 ahd_setup_target_msgin(ahd,
1353 &devinfo,
1354 scb);
1355 }
1356 #endif
1357 }
1358
1359 ahd_handle_message_phase(ahd);
1360 break;
1361 }
1362 case NO_MATCH:
1363 {
1364 /* Ensure we don't leave the selection hardware on */
1365 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
1366 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
1367
1368 printf("%s:%c:%d: no active SCB for reconnecting "
1369 "target - issuing BUS DEVICE RESET\n",
1370 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4);
1371 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
1372 "REG0 == 0x%x ACCUM = 0x%x\n",
1373 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN),
1374 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM));
1375 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
1376 "SINDEX == 0x%x\n",
1377 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd),
1378 ahd_find_busy_tcl(ahd,
1379 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID),
1380 ahd_inb(ahd, SAVED_LUN))),
1381 ahd_inw(ahd, SINDEX));
1382 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
1383 "SCB_CONTROL == 0x%x\n",
1384 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID),
1385 ahd_inb_scbram(ahd, SCB_LUN),
1386 ahd_inb_scbram(ahd, SCB_CONTROL));
1387 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n",
1388 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI));
1389 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0));
1390 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0));
1391 ahd_dump_card_state(ahd);
1392 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET;
1393 ahd->msgout_len = 1;
1394 ahd->msgout_index = 0;
1395 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
1396 ahd_outb(ahd, MSG_OUT, HOST_MSG);
1397 ahd_assert_atn(ahd);
1398 break;
1399 }
1400 case PROTO_VIOLATION:
1401 {
1402 ahd_handle_proto_violation(ahd);
1403 break;
1404 }
1405 case IGN_WIDE_RES:
1406 {
1407 struct ahd_devinfo devinfo;
1408
1409 ahd_fetch_devinfo(ahd, &devinfo);
1410 ahd_handle_ign_wide_residue(ahd, &devinfo);
1411 break;
1412 }
1413 case BAD_PHASE:
1414 {
1415 u_int lastphase;
1416
1417 lastphase = ahd_inb(ahd, LASTPHASE);
1418 printf("%s:%c:%d: unknown scsi bus phase %x, "
1419 "lastphase = 0x%x. Attempting to continue\n",
1420 ahd_name(ahd), 'A',
1421 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
1422 lastphase, ahd_inb(ahd, SCSISIGI));
1423 break;
1424 }
1425 case MISSED_BUSFREE:
1426 {
1427 u_int lastphase;
1428
1429 lastphase = ahd_inb(ahd, LASTPHASE);
1430 printf("%s:%c:%d: Missed busfree. "
1431 "Lastphase = 0x%x, Curphase = 0x%x\n",
1432 ahd_name(ahd), 'A',
1433 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
1434 lastphase, ahd_inb(ahd, SCSISIGI));
1435 ahd_restart(ahd);
1436 return;
1437 }
1438 case DATA_OVERRUN:
1439 {
1440 /*
1441 * When the sequencer detects an overrun, it
1442 * places the controller in "BITBUCKET" mode
1443 * and allows the target to complete its transfer.
1444 * Unfortunately, none of the counters get updated
1445 * when the controller is in this mode, so we have
1446 * no way of knowing how large the overrun was.
1447 */
1448 struct scb *scb;
1449 u_int scbindex;
1450 #ifdef AHD_DEBUG
1451 u_int lastphase;
1452 #endif
1453
1454 scbindex = ahd_get_scbptr(ahd);
1455 scb = ahd_lookup_scb(ahd, scbindex);
1456 #ifdef AHD_DEBUG
1457 lastphase = ahd_inb(ahd, LASTPHASE);
1458 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1459 ahd_print_path(ahd, scb);
1460 printf("data overrun detected %s. Tag == 0x%x.\n",
1461 ahd_lookup_phase_entry(lastphase)->phasemsg,
1462 SCB_GET_TAG(scb));
1463 ahd_print_path(ahd, scb);
1464 printf("%s seen Data Phase. Length = %ld. "
1465 "NumSGs = %d.\n",
1466 ahd_inb(ahd, SEQ_FLAGS) & DPHASE
1467 ? "Have" : "Haven't",
1468 ahd_get_transfer_length(scb), scb->sg_count);
1469 ahd_dump_sglist(scb);
1470 }
1471 #endif
1472
1473 /*
1474 * Set this and it will take effect when the
1475 * target does a command complete.
1476 */
1477 ahd_freeze_devq(ahd, scb);
1478 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1479 ahd_freeze_scb(scb);
1480 break;
1481 }
1482 case MKMSG_FAILED:
1483 {
1484 struct ahd_devinfo devinfo;
1485 struct scb *scb;
1486 u_int scbid;
1487
1488 ahd_fetch_devinfo(ahd, &devinfo);
1489 printf("%s:%c:%d:%d: Attempt to issue message failed\n",
1490 ahd_name(ahd), devinfo.channel, devinfo.target,
1491 devinfo.lun);
1492 scbid = ahd_get_scbptr(ahd);
1493 scb = ahd_lookup_scb(ahd, scbid);
1494 if (scb != NULL
1495 && (scb->flags & SCB_RECOVERY_SCB) != 0)
1496 /*
1497 * Ensure that we didn't put a second instance of this
1498 * SCB into the QINFIFO.
1499 */
1500 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
1501 SCB_GET_CHANNEL(ahd, scb),
1502 SCB_GET_LUN(scb), SCB_GET_TAG(scb),
1503 ROLE_INITIATOR, /*status*/0,
1504 SEARCH_REMOVE);
1505 ahd_outb(ahd, SCB_CONTROL,
1506 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
1507 break;
1508 }
1509 case TASKMGMT_FUNC_COMPLETE:
1510 {
1511 u_int scbid;
1512 struct scb *scb;
1513
1514 scbid = ahd_get_scbptr(ahd);
1515 scb = ahd_lookup_scb(ahd, scbid);
1516 if (scb != NULL) {
1517 u_int lun;
1518 u_int tag;
1519 cam_status error;
1520
1521 ahd_print_path(ahd, scb);
1522 printf("Task Management Func 0x%x Complete\n",
1523 scb->hscb->task_management);
1524 lun = CAM_LUN_WILDCARD;
1525 tag = SCB_LIST_NULL;
1526
1527 switch (scb->hscb->task_management) {
1528 case SIU_TASKMGMT_ABORT_TASK:
1529 tag = SCB_GET_TAG(scb);
1530 case SIU_TASKMGMT_ABORT_TASK_SET:
1531 case SIU_TASKMGMT_CLEAR_TASK_SET:
1532 lun = scb->hscb->lun;
1533 error = CAM_REQ_ABORTED;
1534 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1535 'A', lun, tag, ROLE_INITIATOR,
1536 error);
1537 break;
1538 case SIU_TASKMGMT_LUN_RESET:
1539 lun = scb->hscb->lun;
1540 case SIU_TASKMGMT_TARGET_RESET:
1541 {
1542 struct ahd_devinfo devinfo;
1543
1544 ahd_scb_devinfo(ahd, &devinfo, scb);
1545 error = CAM_BDR_SENT;
1546 ahd_handle_devreset(ahd, &devinfo, lun,
1547 CAM_BDR_SENT,
1548 lun != CAM_LUN_WILDCARD
1549 ? "Lun Reset"
1550 : "Target Reset",
1551 /*verbose_level*/0);
1552 break;
1553 }
1554 default:
1555 panic("Unexpected TaskMgmt Func\n");
1556 break;
1557 }
1558 }
1559 break;
1560 }
1561 case TASKMGMT_CMD_CMPLT_OKAY:
1562 {
1563 u_int scbid;
1564 struct scb *scb;
1565
1566 /*
1567 * An ABORT TASK TMF failed to be delivered before
1568 * the targeted command completed normally.
1569 */
1570 scbid = ahd_get_scbptr(ahd);
1571 scb = ahd_lookup_scb(ahd, scbid);
1572 if (scb != NULL) {
1573 /*
1574 * Remove the second instance of this SCB from
1575 * the QINFIFO if it is still there.
1576 */
1577 ahd_print_path(ahd, scb);
1578 printf("SCB completes before TMF\n");
1579 /*
1580 * Handle losing the race. Wait until any
1581 * current selection completes. We will then
1582 * set the TMF back to zero in this SCB so that
1583 * the sequencer doesn't bother to issue another
1584 * sequencer interrupt for its completion.
1585 */
1586 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0
1587 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0
1588 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0)
1589 ;
1590 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0);
1591 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
1592 SCB_GET_CHANNEL(ahd, scb),
1593 SCB_GET_LUN(scb), SCB_GET_TAG(scb),
1594 ROLE_INITIATOR, /*status*/0,
1595 SEARCH_REMOVE);
1596 }
1597 break;
1598 }
1599 case TRACEPOINT0:
1600 case TRACEPOINT1:
1601 case TRACEPOINT2:
1602 case TRACEPOINT3:
1603 printf("%s: Tracepoint %d\n", ahd_name(ahd),
1604 seqintcode - TRACEPOINT0);
1605 break;
1606 case NO_SEQINT:
1607 break;
1608 case SAW_HWERR:
1609 ahd_handle_hwerrint(ahd);
1610 break;
1611 default:
1612 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd),
1613 seqintcode);
1614 break;
1615 }
1616 /*
1617 * The sequencer is paused immediately on
1618 * a SEQINT, so we should restart it when
1619 * we're done.
1620 */
1621 ahd_unpause(ahd);
1622 }
1623
1624 void
1625 ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
1626 {
1627 struct scb *scb;
1628 u_int status0;
1629 u_int status3;
1630 u_int status;
1631 u_int lqistat1;
1632 u_int lqostat0;
1633 u_int scbid;
1634 u_int busfreetime;
1635
1636 ahd_update_modes(ahd);
1637 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1638
1639 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR);
1640 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO);
1641 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
1642 lqistat1 = ahd_inb(ahd, LQISTAT1);
1643 lqostat0 = ahd_inb(ahd, LQOSTAT0);
1644 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;
1645
1646 /*
1647 * Ignore external resets after a bus reset.
1648 */
1649 if (((status & SCSIRSTI) != 0) && (ahd->flags & AHD_BUS_RESET_ACTIVE)) {
1650 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
1651 return;
1652 }
1653
1654 /*
1655 * Clear bus reset flag
1656 */
1657 ahd->flags &= ~AHD_BUS_RESET_ACTIVE;
1658
1659 if ((status0 & (SELDI|SELDO)) != 0) {
1660 u_int simode0;
1661
1662 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
1663 simode0 = ahd_inb(ahd, SIMODE0);
1664 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO);
1665 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1666 }
1667 scbid = ahd_get_scbptr(ahd);
1668 scb = ahd_lookup_scb(ahd, scbid);
1669 if (scb != NULL
1670 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
1671 scb = NULL;
1672
1673 if ((status0 & IOERR) != 0) {
1674 u_int now_lvd;
1675
1676 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40;
1677 printf("%s: Transceiver State Has Changed to %s mode\n",
1678 ahd_name(ahd), now_lvd ? "LVD" : "SE");
1679 ahd_outb(ahd, CLRSINT0, CLRIOERR);
1680 /*
1681 * A change in I/O mode is equivalent to a bus reset.
1682 */
1683 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1684 ahd_pause(ahd);
1685 ahd_setup_iocell_workaround(ahd);
1686 ahd_unpause(ahd);
1687 } else if ((status0 & OVERRUN) != 0) {
1688
1689 printf("%s: SCSI offset overrun detected. Resetting bus.\n",
1690 ahd_name(ahd));
1691 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1692 } else if ((status & SCSIRSTI) != 0) {
1693
1694 printf("%s: Someone reset channel A\n", ahd_name(ahd));
1695 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE);
1696 } else if ((status & SCSIPERR) != 0) {
1697
1698 /* Make sure the sequencer is in a safe location. */
1699 ahd_clear_critical_section(ahd);
1700
1701 ahd_handle_transmission_error(ahd);
1702 } else if (lqostat0 != 0) {
1703
1704 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0);
1705 ahd_outb(ahd, CLRLQOINT0, lqostat0);
1706 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
1707 ahd_outb(ahd, CLRLQOINT1, 0);
1708 } else if ((status & SELTO) != 0) {
1709 u_int scbid;
1710
1711 /* Stop the selection */
1712 ahd_outb(ahd, SCSISEQ0, 0);
1713
1714 /* Make sure the sequencer is in a safe location. */
1715 ahd_clear_critical_section(ahd);
1716
1717 /* No more pending messages */
1718 ahd_clear_msg_state(ahd);
1719
1720 /* Clear interrupt state */
1721 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR);
1722
1723 /*
1724 * Although the driver does not care about the
1725 * 'Selection in Progress' status bit, the busy
1726 * LED does. SELINGO is only cleared by a sucessfull
1727 * selection, so we must manually clear it to insure
1728 * the LED turns off just incase no future successful
1729 * selections occur (e.g. no devices on the bus).
1730 */
1731 ahd_outb(ahd, CLRSINT0, CLRSELINGO);
1732
1733 scbid = ahd_inw(ahd, WAITING_TID_HEAD);
1734 scb = ahd_lookup_scb(ahd, scbid);
1735 if (scb == NULL) {
1736 printf("%s: ahd_intr - referenced scb not "
1737 "valid during SELTO scb(0x%x)\n",
1738 ahd_name(ahd), scbid);
1739 ahd_dump_card_state(ahd);
1740 } else {
1741 struct ahd_devinfo devinfo;
1742 #ifdef AHD_DEBUG
1743 if ((ahd_debug & AHD_SHOW_SELTO) != 0) {
1744 ahd_print_path(ahd, scb);
1745 printf("Saw Selection Timeout for SCB 0x%x\n",
1746 scbid);
1747 }
1748 #endif
1749 ahd_scb_devinfo(ahd, &devinfo, scb);
1750 ahd_set_transaction_status(scb, CAM_SEL_TIMEOUT);
1751 ahd_freeze_devq(ahd, scb);
1752
1753 /*
1754 * Cancel any pending transactions on the device
1755 * now that it seems to be missing. This will
1756 * also revert us to async/narrow transfers until
1757 * we can renegotiate with the device.
1758 */
1759 ahd_handle_devreset(ahd, &devinfo,
1760 CAM_LUN_WILDCARD,
1761 CAM_SEL_TIMEOUT,
1762 "Selection Timeout",
1763 /*verbose_level*/1);
1764 }
1765 ahd_outb(ahd, CLRINT, CLRSCSIINT);
1766 ahd_iocell_first_selection(ahd);
1767 ahd_unpause(ahd);
1768 } else if ((status0 & (SELDI|SELDO)) != 0) {
1769
1770 ahd_iocell_first_selection(ahd);
1771 ahd_unpause(ahd);
1772 } else if (status3 != 0) {
1773 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n",
1774 ahd_name(ahd), status3);
1775 ahd_outb(ahd, CLRSINT3, status3);
1776 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) {
1777
1778 /* Make sure the sequencer is in a safe location. */
1779 ahd_clear_critical_section(ahd);
1780
1781 ahd_handle_lqiphase_error(ahd, lqistat1);
1782 } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
1783 /*
1784 * This status can be delayed during some
1785 * streaming operations. The SCSIPHASE
1786 * handler has already dealt with this case
1787 * so just clear the error.
1788 */
1789 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ);
1790 } else if ((status & BUSFREE) != 0
1791 || (lqistat1 & LQOBUSFREE) != 0) {
1792 u_int lqostat1;
1793 int restart;
1794 int clear_fifo;
1795 int packetized;
1796 u_int mode;
1797
1798 /*
1799 * Clear our selection hardware as soon as possible.
1800 * We may have an entry in the waiting Q for this target,
1801 * that is affected by this busfree and we don't want to
1802 * go about selecting the target while we handle the event.
1803 */
1804 ahd_outb(ahd, SCSISEQ0, 0);
1805
1806 /* Make sure the sequencer is in a safe location. */
1807 ahd_clear_critical_section(ahd);
1808
1809 /*
1810 * Determine what we were up to at the time of
1811 * the busfree.
1812 */
1813 mode = AHD_MODE_SCSI;
1814 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;
1815 lqostat1 = ahd_inb(ahd, LQOSTAT1);
1816 switch (busfreetime) {
1817 case BUSFREE_DFF0:
1818 case BUSFREE_DFF1:
1819 {
1820 u_int scbid;
1821 struct scb *scb;
1822
1823 mode = busfreetime == BUSFREE_DFF0
1824 ? AHD_MODE_DFF0 : AHD_MODE_DFF1;
1825 ahd_set_modes(ahd, mode, mode);
1826 scbid = ahd_get_scbptr(ahd);
1827 scb = ahd_lookup_scb(ahd, scbid);
1828 if (scb == NULL) {
1829 printf("%s: Invalid SCB %d in DFF%d "
1830 "during unexpected busfree\n",
1831 ahd_name(ahd), scbid, mode);
1832 packetized = 0;
1833 } else
1834 packetized = (scb->flags & SCB_PACKETIZED) != 0;
1835 clear_fifo = 1;
1836 break;
1837 }
1838 case BUSFREE_LQO:
1839 clear_fifo = 0;
1840 packetized = 1;
1841 break;
1842 default:
1843 clear_fifo = 0;
1844 packetized = (lqostat1 & LQOBUSFREE) != 0;
1845 if (!packetized
1846 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE
1847 && (ahd_inb(ahd, SSTAT0) & SELDI) == 0
1848 && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0
1849 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0))
1850 /*
1851 * Assume packetized if we are not
1852 * on the bus in a non-packetized
1853 * capacity and any pending selection
1854 * was a packetized selection.
1855 */
1856 packetized = 1;
1857 break;
1858 }
1859
1860 #ifdef AHD_DEBUG
1861 if ((ahd_debug & AHD_SHOW_MISC) != 0)
1862 printf("Saw Busfree. Busfreetime = 0x%x.\n",
1863 busfreetime);
1864 #endif
1865 /*
1866 * Busfrees that occur in non-packetized phases are
1867 * handled by the nonpkt_busfree handler.
1868 */
1869 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) {
1870 restart = ahd_handle_pkt_busfree(ahd, busfreetime);
1871 } else {
1872 packetized = 0;
1873 restart = ahd_handle_nonpkt_busfree(ahd);
1874 }
1875 /*
1876 * Clear the busfree interrupt status. The setting of
1877 * the interrupt is a pulse, so in a perfect world, we
1878 * would not need to muck with the ENBUSFREE logic. This
1879 * would ensure that if the bus moves on to another
1880 * connection, busfree protection is still in force. If
1881 * BUSFREEREV is broken, however, we must manually clear
1882 * the ENBUSFREE if the busfree occurred during a non-pack
1883 * connection so that we don't get false positives during
1884 * future, packetized, connections.
1885 */
1886 ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
1887 if (packetized == 0
1888 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0)
1889 ahd_outb(ahd, SIMODE1,
1890 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE);
1891
1892 if (clear_fifo)
1893 ahd_clear_fifo(ahd, mode);
1894
1895 ahd_clear_msg_state(ahd);
1896 ahd_outb(ahd, CLRINT, CLRSCSIINT);
1897 if (restart) {
1898 ahd_restart(ahd);
1899 } else {
1900 ahd_unpause(ahd);
1901 }
1902 } else {
1903 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n",
1904 ahd_name(ahd), status);
1905 ahd_dump_card_state(ahd);
1906 ahd_clear_intstat(ahd);
1907 ahd_unpause(ahd);
1908 }
1909 }
1910
1911 static void
1912 ahd_handle_transmission_error(struct ahd_softc *ahd)
1913 {
1914 struct scb *scb;
1915 u_int scbid;
1916 u_int lqistat1;
1917 u_int lqistat2;
1918 u_int msg_out;
1919 u_int curphase;
1920 u_int lastphase;
1921 u_int perrdiag;
1922 u_int cur_col;
1923 int silent;
1924
1925 scb = NULL;
1926 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1927 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ);
1928 lqistat2 = ahd_inb(ahd, LQISTAT2);
1929 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0
1930 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) {
1931 u_int lqistate;
1932
1933 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
1934 lqistate = ahd_inb(ahd, LQISTATE);
1935 if ((lqistate >= 0x1E && lqistate <= 0x24)
1936 || (lqistate == 0x29)) {
1937 #ifdef AHD_DEBUG
1938 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1939 printf("%s: NLQCRC found via LQISTATE\n",
1940 ahd_name(ahd));
1941 }
1942 #endif
1943 lqistat1 |= LQICRCI_NLQ;
1944 }
1945 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1946 }
1947
1948 ahd_outb(ahd, CLRLQIINT1, lqistat1);
1949 lastphase = ahd_inb(ahd, LASTPHASE);
1950 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1951 perrdiag = ahd_inb(ahd, PERRDIAG);
1952 msg_out = MSG_INITIATOR_DET_ERR;
1953 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR);
1954
1955 /*
1956 * Try to find the SCB associated with this error.
1957 */
1958 silent = FALSE;
1959 if (lqistat1 == 0
1960 || (lqistat1 & LQICRCI_NLQ) != 0) {
1961 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0)
1962 ahd_set_active_fifo(ahd);
1963 scbid = ahd_get_scbptr(ahd);
1964 scb = ahd_lookup_scb(ahd, scbid);
1965 if (scb != NULL && SCB_IS_SILENT(scb))
1966 silent = TRUE;
1967 }
1968
1969 cur_col = 0;
1970 if (silent == FALSE) {
1971 printf("%s: Transmission error detected\n", ahd_name(ahd));
1972 ahd_lqistat1_print(lqistat1, &cur_col, 50);
1973 ahd_lastphase_print(lastphase, &cur_col, 50);
1974 ahd_scsisigi_print(curphase, &cur_col, 50);
1975 ahd_perrdiag_print(perrdiag, &cur_col, 50);
1976 printf("\n");
1977 ahd_dump_card_state(ahd);
1978 }
1979
1980 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) {
1981 if (silent == FALSE) {
1982 printf("%s: Gross protocol error during incoming "
1983 "packet. lqistat1 == 0x%x. Resetting bus.\n",
1984 ahd_name(ahd), lqistat1);
1985 }
1986 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1987 return;
1988 } else if ((lqistat1 & LQICRCI_LQ) != 0) {
1989 /*
1990 * A CRC error has been detected on an incoming LQ.
1991 * The bus is currently hung on the last ACK.
1992 * Hit LQIRETRY to release the last ack, and
1993 * wait for the sequencer to determine that ATNO
1994 * is asserted while in message out to take us
1995 * to our host message loop. No NONPACKREQ or
1996 * LQIPHASE type errors will occur in this
1997 * scenario. After this first LQIRETRY, the LQI
1998 * manager will be in ISELO where it will
1999 * happily sit until another packet phase begins.
2000 * Unexpected bus free detection is enabled
2001 * through any phases that occur after we release
2002 * this last ack until the LQI manager sees a
2003 * packet phase. This implies we may have to
2004 * ignore a perfectly valid "unexected busfree"
2005 * after our "initiator detected error" message is
2006 * sent. A busfree is the expected response after
2007 * we tell the target that it's L_Q was corrupted.
2008 * (SPI4R09 10.7.3.3.3)
2009 */
2010 ahd_outb(ahd, LQCTL2, LQIRETRY);
2011 printf("LQIRetry for LQICRCI_LQ to release ACK\n");
2012 } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
2013 /*
2014 * We detected a CRC error in a NON-LQ packet.
2015 * The hardware has varying behavior in this situation
2016 * depending on whether this packet was part of a
2017 * stream or not.
2018 *
2019 * PKT by PKT mode:
2020 * The hardware has already acked the complete packet.
2021 * If the target honors our outstanding ATN condition,
2022 * we should be (or soon will be) in MSGOUT phase.
2023 * This will trigger the LQIPHASE_LQ status bit as the
2024 * hardware was expecting another LQ. Unexpected
2025 * busfree detection is enabled. Once LQIPHASE_LQ is
2026 * true (first entry into host message loop is much
2027 * the same), we must clear LQIPHASE_LQ and hit
2028 * LQIRETRY so the hardware is ready to handle
2029 * a future LQ. NONPACKREQ will not be asserted again
2030 * once we hit LQIRETRY until another packet is
2031 * processed. The target may either go busfree
2032 * or start another packet in response to our message.
2033 *
2034 * Read Streaming P0 asserted:
2035 * If we raise ATN and the target completes the entire
2036 * stream (P0 asserted during the last packet), the
2037 * hardware will ack all data and return to the ISTART
2038 * state. When the target reponds to our ATN condition,
2039 * LQIPHASE_LQ will be asserted. We should respond to
2040 * this with an LQIRETRY to prepare for any future
2041 * packets. NONPACKREQ will not be asserted again
2042 * once we hit LQIRETRY until another packet is
2043 * processed. The target may either go busfree or
2044 * start another packet in response to our message.
2045 * Busfree detection is enabled.
2046 *
2047 * Read Streaming P0 not asserted:
2048 * If we raise ATN and the target transitions to
2049 * MSGOUT in or after a packet where P0 is not
2050 * asserted, the hardware will assert LQIPHASE_NLQ.
2051 * We should respond to the LQIPHASE_NLQ with an
2052 * LQIRETRY. Should the target stay in a non-pkt
2053 * phase after we send our message, the hardware
2054 * will assert LQIPHASE_LQ. Recovery is then just as
2055 * listed above for the read streaming with P0 asserted.
2056 * Busfree detection is enabled.
2057 */
2058 if (silent == FALSE)
2059 printf("LQICRC_NLQ\n");
2060 if (scb == NULL) {
2061 printf("%s: No SCB valid for LQICRC_NLQ. "
2062 "Resetting bus\n", ahd_name(ahd));
2063 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2064 return;
2065 }
2066 } else if ((lqistat1 & LQIBADLQI) != 0) {
2067 printf("Need to handle BADLQI!\n");
2068 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2069 return;
2070 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) {
2071 if ((curphase & ~P_DATAIN_DT) != 0) {
2072 /* Ack the byte. So we can continue. */
2073 if (silent == FALSE)
2074 printf("Acking %s to clear perror\n",
2075 ahd_lookup_phase_entry(curphase)->phasemsg);
2076 ahd_inb(ahd, SCSIDAT);
2077 }
2078
2079 if (curphase == P_MESGIN)
2080 msg_out = MSG_PARITY_ERROR;
2081 }
2082
2083 /*
2084 * We've set the hardware to assert ATN if we
2085 * get a parity error on "in" phases, so all we
2086 * need to do is stuff the message buffer with
2087 * the appropriate message. "In" phases have set
2088 * mesg_out to something other than MSG_NOP.
2089 */
2090 ahd->send_msg_perror = msg_out;
2091 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR)
2092 scb->flags |= SCB_TRANSMISSION_ERROR;
2093 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2094 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2095 ahd_unpause(ahd);
2096 }
2097
2098 static void
2099 ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1)
2100 {
2101 /*
2102 * Clear the sources of the interrupts.
2103 */
2104 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2105 ahd_outb(ahd, CLRLQIINT1, lqistat1);
2106
2107 /*
2108 * If the "illegal" phase changes were in response
2109 * to our ATN to flag a CRC error, AND we ended up
2110 * on packet boundaries, clear the error, restart the
2111 * LQI manager as appropriate, and go on our merry
2112 * way toward sending the message. Otherwise, reset
2113 * the bus to clear the error.
2114 */
2115 ahd_set_active_fifo(ahd);
2116 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0
2117 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) {
2118 if ((lqistat1 & LQIPHASE_LQ) != 0) {
2119 printf("LQIRETRY for LQIPHASE_LQ\n");
2120 ahd_outb(ahd, LQCTL2, LQIRETRY);
2121 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) {
2122 printf("LQIRETRY for LQIPHASE_NLQ\n");
2123 ahd_outb(ahd, LQCTL2, LQIRETRY);
2124 } else
2125 panic("ahd_handle_lqiphase_error: No phase errors\n");
2126 ahd_dump_card_state(ahd);
2127 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2128 ahd_unpause(ahd);
2129 } else {
2130 printf("Reseting Channel for LQI Phase error\n");
2131 ahd_dump_card_state(ahd);
2132 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2133 }
2134 }
2135
2136 /*
2137 * Packetized unexpected or expected busfree.
2138 * Entered in mode based on busfreetime.
2139 */
2140 static int
2141 ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime)
2142 {
2143 u_int lqostat1;
2144
2145 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
2146 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
2147 lqostat1 = ahd_inb(ahd, LQOSTAT1);
2148 if ((lqostat1 & LQOBUSFREE) != 0) {
2149 struct scb *scb;
2150 u_int scbid;
2151 u_int saved_scbptr;
2152 u_int waiting_h;
2153 u_int waiting_t;
2154 u_int next;
2155
2156 /*
2157 * The LQO manager detected an unexpected busfree
2158 * either:
2159 *
2160 * 1) During an outgoing LQ.
2161 * 2) After an outgoing LQ but before the first
2162 * REQ of the command packet.
2163 * 3) During an outgoing command packet.
2164 *
2165 * In all cases, CURRSCB is pointing to the
2166 * SCB that encountered the failure. Clean
2167 * up the queue, clear SELDO and LQOBUSFREE,
2168 * and allow the sequencer to restart the select
2169 * out at its lesure.
2170 */
2171 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2172 scbid = ahd_inw(ahd, CURRSCB);
2173 scb = ahd_lookup_scb(ahd, scbid);
2174 if (scb == NULL)
2175 panic("SCB not valid during LQOBUSFREE");
2176 /*
2177 * Clear the status.
2178 */
2179 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE);
2180 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
2181 ahd_outb(ahd, CLRLQOINT1, 0);
2182 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
2183 ahd_flush_device_writes(ahd);
2184 ahd_outb(ahd, CLRSINT0, CLRSELDO);
2185
2186 /*
2187 * Return the LQO manager to its idle loop. It will
2188 * not do this automatically if the busfree occurs
2189 * after the first REQ of either the LQ or command
2190 * packet or between the LQ and command packet.
2191 */
2192 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE);
2193
2194 /*
2195 * Update the waiting for selection queue so
2196 * we restart on the correct SCB.
2197 */
2198 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD);
2199 saved_scbptr = ahd_get_scbptr(ahd);
2200 if (waiting_h != scbid) {
2201
2202 ahd_outw(ahd, WAITING_TID_HEAD, scbid);
2203 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL);
2204 if (waiting_t == waiting_h) {
2205 ahd_outw(ahd, WAITING_TID_TAIL, scbid);
2206 next = SCB_LIST_NULL;
2207 } else {
2208 ahd_set_scbptr(ahd, waiting_h);
2209 next = ahd_inw_scbram(ahd, SCB_NEXT2);
2210 }
2211 ahd_set_scbptr(ahd, scbid);
2212 ahd_outw(ahd, SCB_NEXT2, next);
2213 }
2214 ahd_set_scbptr(ahd, saved_scbptr);
2215 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) {
2216 if (SCB_IS_SILENT(scb) == FALSE) {
2217 ahd_print_path(ahd, scb);
2218 printf("Probable outgoing LQ CRC error. "
2219 "Retrying command\n");
2220 }
2221 scb->crc_retry_count++;
2222 } else {
2223 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
2224 ahd_freeze_scb(scb);
2225 ahd_freeze_devq(ahd, scb);
2226 }
2227 /* Return unpausing the sequencer. */
2228 return (0);
2229 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) {
2230 /*
2231 * Ignore what are really parity errors that
2232 * occur on the last REQ of a free running
2233 * clock prior to going busfree. Some drives
2234 * do not properly active negate just before
2235 * going busfree resulting in a parity glitch.
2236 */
2237 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE);
2238 #ifdef AHD_DEBUG
2239 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0)
2240 printf("%s: Parity on last REQ detected "
2241 "during busfree phase.\n",
2242 ahd_name(ahd));
2243 #endif
2244 /* Return unpausing the sequencer. */
2245 return (0);
2246 }
2247 if (ahd->src_mode != AHD_MODE_SCSI) {
2248 u_int scbid;
2249 struct scb *scb;
2250
2251 scbid = ahd_get_scbptr(ahd);
2252 scb = ahd_lookup_scb(ahd, scbid);
2253 ahd_print_path(ahd, scb);
2254 printf("Unexpected PKT busfree condition\n");
2255 ahd_dump_card_state(ahd);
2256 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A',
2257 SCB_GET_LUN(scb), SCB_GET_TAG(scb),
2258 ROLE_INITIATOR, CAM_UNEXP_BUSFREE);
2259
2260 /* Return restarting the sequencer. */
2261 return (1);
2262 }
2263 printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd));
2264 ahd_dump_card_state(ahd);
2265 /* Restart the sequencer. */
2266 return (1);
2267 }
2268
2269 /*
2270 * Non-packetized unexpected or expected busfree.
2271 */
2272 static int
2273 ahd_handle_nonpkt_busfree(struct ahd_softc *ahd)
2274 {
2275 struct ahd_devinfo devinfo;
2276 struct scb *scb;
2277 u_int lastphase;
2278 u_int saved_scsiid;
2279 u_int saved_lun;
2280 u_int target;
2281 u_int initiator_role_id;
2282 u_int scbid;
2283 u_int ppr_busfree;
2284 int printerror;
2285
2286 /*
2287 * Look at what phase we were last in. If its message out,
2288 * chances are pretty good that the busfree was in response
2289 * to one of our abort requests.
2290 */
2291 lastphase = ahd_inb(ahd, LASTPHASE);
2292 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2293 saved_lun = ahd_inb(ahd, SAVED_LUN);
2294 target = SCSIID_TARGET(ahd, saved_scsiid);
2295 initiator_role_id = SCSIID_OUR_ID(saved_scsiid);
2296 ahd_compile_devinfo(&devinfo, initiator_role_id,
2297 target, saved_lun, 'A', ROLE_INITIATOR);
2298 printerror = 1;
2299
2300 scbid = ahd_get_scbptr(ahd);
2301 scb = ahd_lookup_scb(ahd, scbid);
2302 if (scb != NULL
2303 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
2304 scb = NULL;
2305
2306 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0;
2307 if (lastphase == P_MESGOUT) {
2308 u_int tag;
2309
2310 tag = SCB_LIST_NULL;
2311 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE)
2312 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) {
2313 int found;
2314 int sent_msg;
2315
2316 if (scb == NULL) {
2317 ahd_print_devinfo(ahd, &devinfo);
2318 printf("Abort for unidentified "
2319 "connection completed.\n");
2320 /* restart the sequencer. */
2321 return (1);
2322 }
2323 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1];
2324 ahd_print_path(ahd, scb);
2325 printf("SCB %d - Abort%s Completed.\n",
2326 SCB_GET_TAG(scb),
2327 sent_msg == MSG_ABORT_TAG ? "" : " Tag");
2328
2329 if (sent_msg == MSG_ABORT_TAG)
2330 tag = SCB_GET_TAG(scb);
2331
2332 if ((scb->flags & SCB_EXTERNAL_RESET) != 0) {
2333 /*
2334 * This abort is in response to an
2335 * unexpected switch to command phase
2336 * for a packetized connection. Since
2337 * the identify message was never sent,
2338 * "saved lun" is 0. We really want to
2339 * abort only the SCB that encountered
2340 * this error, which could have a different
2341 * lun. The SCB will be retried so the OS
2342 * will see the UA after renegotiating to
2343 * packetized.
2344 */
2345 tag = SCB_GET_TAG(scb);
2346 saved_lun = scb->hscb->lun;
2347 }
2348 found = ahd_abort_scbs(ahd, target, 'A', saved_lun,
2349 tag, ROLE_INITIATOR,
2350 CAM_REQ_ABORTED);
2351 printf("found == 0x%x\n", found);
2352 printerror = 0;
2353 } else if (ahd_sent_msg(ahd, AHDMSG_1B,
2354 MSG_BUS_DEV_RESET, TRUE)) {
2355 #ifdef __FreeBSD__
2356 /*
2357 * Don't mark the user's request for this BDR
2358 * as completing with CAM_BDR_SENT. CAM3
2359 * specifies CAM_REQ_CMP.
2360 */
2361 if (scb != NULL
2362 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV
2363 && ahd_match_scb(ahd, scb, target, 'A',
2364 CAM_LUN_WILDCARD, SCB_LIST_NULL,
2365 ROLE_INITIATOR))
2366 ahd_set_transaction_status(scb, CAM_REQ_CMP);
2367 #endif
2368 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD,
2369 CAM_BDR_SENT, "Bus Device Reset",
2370 /*verbose_level*/0);
2371 printerror = 0;
2372 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE)
2373 && ppr_busfree == 0) {
2374 struct ahd_initiator_tinfo *tinfo;
2375 struct ahd_tmode_tstate *tstate;
2376
2377 /*
2378 * PPR Rejected.
2379 *
2380 * If the previous negotiation was packetized,
2381 * this could be because the device has been
2382 * reset without our knowledge. Force our
2383 * current negotiation to async and retry the
2384 * negotiation. Otherwise retry the command
2385 * with non-ppr negotiation.
2386 */
2387 #ifdef AHD_DEBUG
2388 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2389 printf("PPR negotiation rejected busfree.\n");
2390 #endif
2391 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
2392 devinfo.our_scsiid,
2393 devinfo.target, &tstate);
2394 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) {
2395 ahd_set_width(ahd, &devinfo,
2396 MSG_EXT_WDTR_BUS_8_BIT,
2397 AHD_TRANS_CUR,
2398 /*paused*/TRUE);
2399 ahd_set_syncrate(ahd, &devinfo,
2400 /*period*/0, /*offset*/0,
2401 /*ppr_options*/0,
2402 AHD_TRANS_CUR,
2403 /*paused*/TRUE);
2404 /*
2405 * The expect PPR busfree handler below
2406 * will effect the retry and necessary
2407 * abort.
2408 */
2409 } else {
2410 tinfo->curr.transport_version = 2;
2411 tinfo->goal.transport_version = 2;
2412 tinfo->goal.ppr_options = 0;
2413 /*
2414 * Remove any SCBs in the waiting for selection
2415 * queue that may also be for this target so
2416 * that command ordering is preserved.
2417 */
2418 ahd_freeze_devq(ahd, scb);
2419 ahd_qinfifo_requeue_tail(ahd, scb);
2420 printerror = 0;
2421 }
2422 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE)
2423 && ppr_busfree == 0) {
2424 /*
2425 * Negotiation Rejected. Go-narrow and
2426 * retry command.
2427 */
2428 #ifdef AHD_DEBUG
2429 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2430 printf("WDTR negotiation rejected busfree.\n");
2431 #endif
2432 ahd_set_width(ahd, &devinfo,
2433 MSG_EXT_WDTR_BUS_8_BIT,
2434 AHD_TRANS_CUR|AHD_TRANS_GOAL,
2435 /*paused*/TRUE);
2436 /*
2437 * Remove any SCBs in the waiting for selection
2438 * queue that may also be for this target so that
2439 * command ordering is preserved.
2440 */
2441 ahd_freeze_devq(ahd, scb);
2442 ahd_qinfifo_requeue_tail(ahd, scb);
2443 printerror = 0;
2444 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE)
2445 && ppr_busfree == 0) {
2446 /*
2447 * Negotiation Rejected. Go-async and
2448 * retry command.
2449 */
2450 #ifdef AHD_DEBUG
2451 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2452 printf("SDTR negotiation rejected busfree.\n");
2453 #endif
2454 ahd_set_syncrate(ahd, &devinfo,
2455 /*period*/0, /*offset*/0,
2456 /*ppr_options*/0,
2457 AHD_TRANS_CUR|AHD_TRANS_GOAL,
2458 /*paused*/TRUE);
2459 /*
2460 * Remove any SCBs in the waiting for selection
2461 * queue that may also be for this target so that
2462 * command ordering is preserved.
2463 */
2464 ahd_freeze_devq(ahd, scb);
2465 ahd_qinfifo_requeue_tail(ahd, scb);
2466 printerror = 0;
2467 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
2468 && ahd_sent_msg(ahd, AHDMSG_1B,
2469 MSG_INITIATOR_DET_ERR, TRUE)) {
2470
2471 #ifdef AHD_DEBUG
2472 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2473 printf("Expected IDE Busfree\n");
2474 #endif
2475 printerror = 0;
2476 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE)
2477 && ahd_sent_msg(ahd, AHDMSG_1B,
2478 MSG_MESSAGE_REJECT, TRUE)) {
2479
2480 #ifdef AHD_DEBUG
2481 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2482 printf("Expected QAS Reject Busfree\n");
2483 #endif
2484 printerror = 0;
2485 }
2486 }
2487
2488 /*
2489 * The busfree required flag is honored at the end of
2490 * the message phases. We check it last in case we
2491 * had to send some other message that caused a busfree.
2492 */
2493 if (printerror != 0
2494 && (lastphase == P_MESGIN || lastphase == P_MESGOUT)
2495 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) {
2496
2497 ahd_freeze_devq(ahd, scb);
2498 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
2499 ahd_freeze_scb(scb);
2500 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) {
2501 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
2502 SCB_GET_CHANNEL(ahd, scb),
2503 SCB_GET_LUN(scb), SCB_LIST_NULL,
2504 ROLE_INITIATOR, CAM_REQ_ABORTED);
2505 } else {
2506 #ifdef AHD_DEBUG
2507 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2508 printf("PPR Negotiation Busfree.\n");
2509 #endif
2510 ahd_done(ahd, scb);
2511 }
2512 printerror = 0;
2513 }
2514 if (printerror != 0) {
2515 int aborted;
2516
2517 aborted = 0;
2518 if (scb != NULL) {
2519 u_int tag;
2520
2521 if ((scb->hscb->control & TAG_ENB) != 0)
2522 tag = SCB_GET_TAG(scb);
2523 else
2524 tag = SCB_LIST_NULL;
2525 ahd_print_path(ahd, scb);
2526 aborted = ahd_abort_scbs(ahd, target, 'A',
2527 SCB_GET_LUN(scb), tag,
2528 ROLE_INITIATOR,
2529 CAM_UNEXP_BUSFREE);
2530 } else {
2531 /*
2532 * We had not fully identified this connection,
2533 * so we cannot abort anything.
2534 */
2535 printf("%s: ", ahd_name(ahd));
2536 }
2537 printf("Unexpected busfree %s, %d SCBs aborted, "
2538 "PRGMCNT == 0x%x\n",
2539 ahd_lookup_phase_entry(lastphase)->phasemsg,
2540 aborted,
2541 ahd_inw(ahd, PRGMCNT));
2542 ahd_dump_card_state(ahd);
2543 if (lastphase != P_BUSFREE)
2544 ahd_force_renegotiation(ahd, &devinfo);
2545 }
2546 /* Always restart the sequencer. */
2547 return (1);
2548 }
2549
2550 static void
2551 ahd_handle_proto_violation(struct ahd_softc *ahd)
2552 {
2553 struct ahd_devinfo devinfo;
2554 struct scb *scb;
2555 u_int scbid;
2556 u_int seq_flags;
2557 u_int curphase;
2558 u_int lastphase;
2559 int found;
2560
2561 ahd_fetch_devinfo(ahd, &devinfo);
2562 scbid = ahd_get_scbptr(ahd);
2563 scb = ahd_lookup_scb(ahd, scbid);
2564 seq_flags = ahd_inb(ahd, SEQ_FLAGS);
2565 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
2566 lastphase = ahd_inb(ahd, LASTPHASE);
2567 if ((seq_flags & NOT_IDENTIFIED) != 0) {
2568
2569 /*
2570 * The reconnecting target either did not send an
2571 * identify message, or did, but we didn't find an SCB
2572 * to match.
2573 */
2574 ahd_print_devinfo(ahd, &devinfo);
2575 printf("Target did not send an IDENTIFY message. "
2576 "LASTPHASE = 0x%x.\n", lastphase);
2577 scb = NULL;
2578 } else if (scb == NULL) {
2579 /*
2580 * We don't seem to have an SCB active for this
2581 * transaction. Print an error and reset the bus.
2582 */
2583 ahd_print_devinfo(ahd, &devinfo);
2584 printf("No SCB found during protocol violation\n");
2585 goto proto_violation_reset;
2586 } else {
2587 ahd_set_transaction_status(scb, CAM_SEQUENCE_FAIL);
2588 if ((seq_flags & NO_CDB_SENT) != 0) {
2589 ahd_print_path(ahd, scb);
2590 printf("No or incomplete CDB sent to device.\n");
2591 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL)
2592 & STATUS_RCVD) == 0) {
2593 /*
2594 * The target never bothered to provide status to
2595 * us prior to completing the command. Since we don't
2596 * know the disposition of this command, we must attempt
2597 * to abort it. Assert ATN and prepare to send an abort
2598 * message.
2599 */
2600 ahd_print_path(ahd, scb);
2601 printf("Completed command without status.\n");
2602 } else {
2603 ahd_print_path(ahd, scb);
2604 printf("Unknown protocol violation.\n");
2605 ahd_dump_card_state(ahd);
2606 }
2607 }
2608 if ((lastphase & ~P_DATAIN_DT) == 0
2609 || lastphase == P_COMMAND) {
2610 proto_violation_reset:
2611 /*
2612 * Target either went directly to data
2613 * phase or didn't respond to our ATN.
2614 * The only safe thing to do is to blow
2615 * it away with a bus reset.
2616 */
2617 found = ahd_reset_channel(ahd, 'A', TRUE);
2618 printf("%s: Issued Channel %c Bus Reset. "
2619 "%d SCBs aborted\n", ahd_name(ahd), 'A', found);
2620 } else {
2621 /*
2622 * Leave the selection hardware off in case
2623 * this abort attempt will affect yet to
2624 * be sent commands.
2625 */
2626 ahd_outb(ahd, SCSISEQ0,
2627 ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
2628 ahd_assert_atn(ahd);
2629 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2630 if (scb == NULL) {
2631 ahd_print_devinfo(ahd, &devinfo);
2632 ahd->msgout_buf[0] = MSG_ABORT_TASK;
2633 ahd->msgout_len = 1;
2634 ahd->msgout_index = 0;
2635 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
2636 } else {
2637 ahd_print_path(ahd, scb);
2638 scb->flags |= SCB_ABORT;
2639 }
2640 printf("Protocol violation %s. Attempting to abort.\n",
2641 ahd_lookup_phase_entry(curphase)->phasemsg);
2642 }
2643 }
2644
2645 /*
2646 * Force renegotiation to occur the next time we initiate
2647 * a command to the current device.
2648 */
2649 static void
2650 ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
2651 {
2652 struct ahd_initiator_tinfo *targ_info;
2653 struct ahd_tmode_tstate *tstate;
2654
2655 #ifdef AHD_DEBUG
2656 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
2657 ahd_print_devinfo(ahd, devinfo);
2658 printf("Forcing renegotiation\n");
2659 }
2660 #endif
2661 targ_info = ahd_fetch_transinfo(ahd,
2662 devinfo->channel,
2663 devinfo->our_scsiid,
2664 devinfo->target,
2665 &tstate);
2666 ahd_update_neg_request(ahd, devinfo, tstate,
2667 targ_info, AHD_NEG_IF_NON_ASYNC);
2668 }
2669
2670 #define AHD_MAX_STEPS 2000
2671 static void
2672 ahd_clear_critical_section(struct ahd_softc *ahd)
2673 {
2674 ahd_mode_state saved_modes;
2675 int stepping;
2676 int steps;
2677 int first_instr;
2678 u_int simode0;
2679 u_int simode1;
2680 u_int simode3;
2681 u_int lqimode0;
2682 u_int lqimode1;
2683 u_int lqomode0;
2684 u_int lqomode1;
2685
2686 if (ahd->num_critical_sections == 0)
2687 return;
2688
2689 stepping = FALSE;
2690 steps = 0;
2691 first_instr = 0;
2692 simode0 = 0;
2693 simode1 = 0;
2694 simode3 = 0;
2695 lqimode0 = 0;
2696 lqimode1 = 0;
2697 lqomode0 = 0;
2698 lqomode1 = 0;
2699 saved_modes = ahd_save_modes(ahd);
2700 for (;;) {
2701 struct cs *cs;
2702 u_int seqaddr;
2703 u_int i;
2704
2705 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2706 seqaddr = ahd_inw(ahd, CURADDR);
2707
2708 cs = ahd->critical_sections;
2709 for (i = 0; i < ahd->num_critical_sections; i++, cs++) {
2710
2711 if (cs->begin < seqaddr && cs->end >= seqaddr)
2712 break;
2713 }
2714
2715 if (i == ahd->num_critical_sections)
2716 break;
2717
2718 if (steps > AHD_MAX_STEPS) {
2719 printf("%s: Infinite loop in critical section\n"
2720 "%s: First Instruction 0x%x now 0x%x\n",
2721 ahd_name(ahd), ahd_name(ahd), first_instr,
2722 seqaddr);
2723 ahd_dump_card_state(ahd);
2724 panic("critical section loop");
2725 }
2726
2727 steps++;
2728 #ifdef AHD_DEBUG
2729 if ((ahd_debug & AHD_SHOW_MISC) != 0)
2730 printf("%s: Single stepping at 0x%x\n", ahd_name(ahd),
2731 seqaddr);
2732 #endif
2733 if (stepping == FALSE) {
2734
2735 first_instr = seqaddr;
2736 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
2737 simode0 = ahd_inb(ahd, SIMODE0);
2738 simode3 = ahd_inb(ahd, SIMODE3);
2739 lqimode0 = ahd_inb(ahd, LQIMODE0);
2740 lqimode1 = ahd_inb(ahd, LQIMODE1);
2741 lqomode0 = ahd_inb(ahd, LQOMODE0);
2742 lqomode1 = ahd_inb(ahd, LQOMODE1);
2743 ahd_outb(ahd, SIMODE0, 0);
2744 ahd_outb(ahd, SIMODE3, 0);
2745 ahd_outb(ahd, LQIMODE0, 0);
2746 ahd_outb(ahd, LQIMODE1, 0);
2747 ahd_outb(ahd, LQOMODE0, 0);
2748 ahd_outb(ahd, LQOMODE1, 0);
2749 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2750 simode1 = ahd_inb(ahd, SIMODE1);
2751 /*
2752 * We don't clear ENBUSFREE. Unfortunately
2753 * we cannot re-enable busfree detection within
2754 * the current connection, so we must leave it
2755 * on while single stepping.
2756 */
2757 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE);
2758 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP);
2759 stepping = TRUE;
2760 }
2761 ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
2762 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2763 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
2764 ahd_outb(ahd, HCNTRL, ahd->unpause);
2765 while (!ahd_is_paused(ahd))
2766 ahd_delay(200);
2767 ahd_update_modes(ahd);
2768 }
2769 if (stepping) {
2770 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
2771 ahd_outb(ahd, SIMODE0, simode0);
2772 ahd_outb(ahd, SIMODE3, simode3);
2773 ahd_outb(ahd, LQIMODE0, lqimode0);
2774 ahd_outb(ahd, LQIMODE1, lqimode1);
2775 ahd_outb(ahd, LQOMODE0, lqomode0);
2776 ahd_outb(ahd, LQOMODE1, lqomode1);
2777 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2778 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
2779 ahd_outb(ahd, SIMODE1, simode1);
2780 /*
2781 * SCSIINT seems to glitch occassionally when
2782 * the interrupt masks are restored. Clear SCSIINT
2783 * one more time so that only persistent errors
2784 * are seen as a real interrupt.
2785 */
2786 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2787 }
2788 ahd_restore_modes(ahd, saved_modes);
2789 }
2790
2791 /*
2792 * Clear any pending interrupt status.
2793 */
2794 static void
2795 ahd_clear_intstat(struct ahd_softc *ahd)
2796 {
2797 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
2798 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
2799 /* Clear any interrupt conditions this may have caused */
2800 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2
2801 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD);
2802 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT
2803 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI
2804 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ);
2805 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ
2806 |CLRLQOATNPKT|CLRLQOTCRC);
2807 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS
2808 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT);
2809 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
2810 ahd_outb(ahd, CLRLQOINT0, 0);
2811 ahd_outb(ahd, CLRLQOINT1, 0);
2812 }
2813 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR);
2814 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI
2815 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT);
2816 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO
2817 |CLRIOERR|CLROVERRUN);
2818 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2819 }
2820
2821 /**************************** Debugging Routines ******************************/
2822 #ifdef AHD_DEBUG
2823 uint32_t ahd_debug = AHD_DEBUG_OPTS;
2824 #endif
2825
2826 #if 0
2827 void
2828 ahd_print_scb(struct scb *scb)
2829 {
2830 struct hardware_scb *hscb;
2831 int i;
2832
2833 hscb = scb->hscb;
2834 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
2835 (void *)scb,
2836 hscb->control,
2837 hscb->scsiid,
2838 hscb->lun,
2839 hscb->cdb_len);
2840 printf("Shared Data: ");
2841 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++)
2842 printf("%#02x", hscb->shared_data.idata.cdb[i]);
2843 printf(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n",
2844 (uint32_t)((ahd_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF),
2845 (uint32_t)(ahd_le64toh(hscb->dataptr) & 0xFFFFFFFF),
2846 ahd_le32toh(hscb->datacnt),
2847 ahd_le32toh(hscb->sgptr),
2848 SCB_GET_TAG(scb));
2849 ahd_dump_sglist(scb);
2850 }
2851 #endif /* 0 */
2852
2853 /************************* Transfer Negotiation *******************************/
2854 /*
2855 * Allocate per target mode instance (ID we respond to as a target)
2856 * transfer negotiation data structures.
2857 */
2858 static struct ahd_tmode_tstate *
2859 ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel)
2860 {
2861 struct ahd_tmode_tstate *master_tstate;
2862 struct ahd_tmode_tstate *tstate;
2863 int i;
2864
2865 master_tstate = ahd->enabled_targets[ahd->our_id];
2866 if (ahd->enabled_targets[scsi_id] != NULL
2867 && ahd->enabled_targets[scsi_id] != master_tstate)
2868 panic("%s: ahd_alloc_tstate - Target already allocated",
2869 ahd_name(ahd));
2870 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_NOWAIT);
2871 if (tstate == NULL)
2872 return (NULL);
2873
2874 /*
2875 * If we have allocated a master tstate, copy user settings from
2876 * the master tstate (taken from SRAM or the EEPROM) for this
2877 * channel, but reset our current and goal settings to async/narrow
2878 * until an initiator talks to us.
2879 */
2880 if (master_tstate != NULL) {
2881 memcpy(tstate, master_tstate, sizeof(*tstate));
2882 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns));
2883 for (i = 0; i < 16; i++) {
2884 memset(&tstate->transinfo[i].curr, 0,
2885 sizeof(tstate->transinfo[i].curr));
2886 memset(&tstate->transinfo[i].goal, 0,
2887 sizeof(tstate->transinfo[i].goal));
2888 }
2889 } else
2890 memset(tstate, 0, sizeof(*tstate));
2891 ahd->enabled_targets[scsi_id] = tstate;
2892 return (tstate);
2893 }
2894
2895 #ifdef AHD_TARGET_MODE
2896 /*
2897 * Free per target mode instance (ID we respond to as a target)
2898 * transfer negotiation data structures.
2899 */
2900 static void
2901 ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force)
2902 {
2903 struct ahd_tmode_tstate *tstate;
2904
2905 /*
2906 * Don't clean up our "master" tstate.
2907 * It has our default user settings.
2908 */
2909 if (scsi_id == ahd->our_id
2910 && force == FALSE)
2911 return;
2912
2913 tstate = ahd->enabled_targets[scsi_id];
2914 if (tstate != NULL)
2915 free(tstate, M_DEVBUF);
2916 ahd->enabled_targets[scsi_id] = NULL;
2917 }
2918 #endif
2919
2920 /*
2921 * Called when we have an active connection to a target on the bus,
2922 * this function finds the nearest period to the input period limited
2923 * by the capabilities of the bus connectivity of and sync settings for
2924 * the target.
2925 */
2926 void
2927 ahd_devlimited_syncrate(struct ahd_softc *ahd,
2928 struct ahd_initiator_tinfo *tinfo,
2929 u_int *period, u_int *ppr_options, role_t role)
2930 {
2931 struct ahd_transinfo *transinfo;
2932 u_int maxsync;
2933
2934 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0
2935 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) {
2936 maxsync = AHD_SYNCRATE_PACED;
2937 } else {
2938 maxsync = AHD_SYNCRATE_ULTRA;
2939 /* Can't do DT related options on an SE bus */
2940 *ppr_options &= MSG_EXT_PPR_QAS_REQ;
2941 }
2942 /*
2943 * Never allow a value higher than our current goal
2944 * period otherwise we may allow a target initiated
2945 * negotiation to go above the limit as set by the
2946 * user. In the case of an initiator initiated
2947 * sync negotiation, we limit based on the user
2948 * setting. This allows the system to still accept
2949 * incoming negotiations even if target initiated
2950 * negotiation is not performed.
2951 */
2952 if (role == ROLE_TARGET)
2953 transinfo = &tinfo->user;
2954 else
2955 transinfo = &tinfo->goal;
2956 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN);
2957 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) {
2958 maxsync = max(maxsync, (u_int)AHD_SYNCRATE_ULTRA2);
2959 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2960 }
2961 if (transinfo->period == 0) {
2962 *period = 0;
2963 *ppr_options = 0;
2964 } else {
2965 *period = max(*period, (u_int)transinfo->period);
2966 ahd_find_syncrate(ahd, period, ppr_options, maxsync);
2967 }
2968 }
2969
2970 /*
2971 * Look up the valid period to SCSIRATE conversion in our table.
2972 * Return the period and offset that should be sent to the target
2973 * if this was the beginning of an SDTR.
2974 */
2975 void
2976 ahd_find_syncrate(struct ahd_softc *ahd, u_int *period,
2977 u_int *ppr_options, u_int maxsync)
2978 {
2979 if (*period < maxsync)
2980 *period = maxsync;
2981
2982 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0
2983 && *period > AHD_SYNCRATE_MIN_DT)
2984 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2985
2986 if (*period > AHD_SYNCRATE_MIN)
2987 *period = 0;
2988
2989 /* Honor PPR option conformance rules. */
2990 if (*period > AHD_SYNCRATE_PACED)
2991 *ppr_options &= ~MSG_EXT_PPR_RTI;
2992
2993 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
2994 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ);
2995
2996 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0)
2997 *ppr_options &= MSG_EXT_PPR_QAS_REQ;
2998
2999 /* Skip all PACED only entries if IU is not available */
3000 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0
3001 && *period < AHD_SYNCRATE_DT)
3002 *period = AHD_SYNCRATE_DT;
3003
3004 /* Skip all DT only entries if DT is not available */
3005 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0
3006 && *period < AHD_SYNCRATE_ULTRA2)
3007 *period = AHD_SYNCRATE_ULTRA2;
3008 }
3009
3010 /*
3011 * Truncate the given synchronous offset to a value the
3012 * current adapter type and syncrate are capable of.
3013 */
3014 static void
3015 ahd_validate_offset(struct ahd_softc *ahd,
3016 struct ahd_initiator_tinfo *tinfo,
3017 u_int period, u_int *offset, int wide,
3018 role_t role)
3019 {
3020 u_int maxoffset;
3021
3022 /* Limit offset to what we can do */
3023 if (period == 0)
3024 maxoffset = 0;
3025 else if (period <= AHD_SYNCRATE_PACED) {
3026 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0)
3027 maxoffset = MAX_OFFSET_PACED_BUG;
3028 else
3029 maxoffset = MAX_OFFSET_PACED;
3030 } else
3031 maxoffset = MAX_OFFSET_NON_PACED;
3032 *offset = min(*offset, maxoffset);
3033 if (tinfo != NULL) {
3034 if (role == ROLE_TARGET)
3035 *offset = min(*offset, (u_int)tinfo->user.offset);
3036 else
3037 *offset = min(*offset, (u_int)tinfo->goal.offset);
3038 }
3039 }
3040
3041 /*
3042 * Truncate the given transfer width parameter to a value the
3043 * current adapter type is capable of.
3044 */
3045 static void
3046 ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo,
3047 u_int *bus_width, role_t role)
3048 {
3049 switch (*bus_width) {
3050 default:
3051 if (ahd->features & AHD_WIDE) {
3052 /* Respond Wide */
3053 *bus_width = MSG_EXT_WDTR_BUS_16_BIT;
3054 break;
3055 }
3056 /* FALLTHROUGH */
3057 case MSG_EXT_WDTR_BUS_8_BIT:
3058 *bus_width = MSG_EXT_WDTR_BUS_8_BIT;
3059 break;
3060 }
3061 if (tinfo != NULL) {
3062 if (role == ROLE_TARGET)
3063 *bus_width = min((u_int)tinfo->user.width, *bus_width);
3064 else
3065 *bus_width = min((u_int)tinfo->goal.width, *bus_width);
3066 }
3067 }
3068
3069 /*
3070 * Update the bitmask of targets for which the controller should
3071 * negotiate with at the next convenient oportunity. This currently
3072 * means the next time we send the initial identify messages for
3073 * a new transaction.
3074 */
3075 int
3076 ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3077 struct ahd_tmode_tstate *tstate,
3078 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type)
3079 {
3080 u_int auto_negotiate_orig;
3081
3082 auto_negotiate_orig = tstate->auto_negotiate;
3083 if (neg_type == AHD_NEG_ALWAYS) {
3084 /*
3085 * Force our "current" settings to be
3086 * unknown so that unless a bus reset
3087 * occurs the need to renegotiate is
3088 * recorded persistently.
3089 */
3090 if ((ahd->features & AHD_WIDE) != 0)
3091 tinfo->curr.width = AHD_WIDTH_UNKNOWN;
3092 tinfo->curr.period = AHD_PERIOD_UNKNOWN;
3093 tinfo->curr.offset = AHD_OFFSET_UNKNOWN;
3094 }
3095 if (tinfo->curr.period != tinfo->goal.period
3096 || tinfo->curr.width != tinfo->goal.width
3097 || tinfo->curr.offset != tinfo->goal.offset
3098 || tinfo->curr.ppr_options != tinfo->goal.ppr_options
3099 || (neg_type == AHD_NEG_IF_NON_ASYNC
3100 && (tinfo->goal.offset != 0
3101 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT
3102 || tinfo->goal.ppr_options != 0)))
3103 tstate->auto_negotiate |= devinfo->target_mask;
3104 else
3105 tstate->auto_negotiate &= ~devinfo->target_mask;
3106
3107 return (auto_negotiate_orig != tstate->auto_negotiate);
3108 }
3109
3110 /*
3111 * Update the user/goal/curr tables of synchronous negotiation
3112 * parameters as well as, in the case of a current or active update,
3113 * any data structures on the host controller. In the case of an
3114 * active update, the specified target is currently talking to us on
3115 * the bus, so the transfer parameter update must take effect
3116 * immediately.
3117 */
3118 void
3119 ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3120 u_int period, u_int offset, u_int ppr_options,
3121 u_int type, int paused)
3122 {
3123 struct ahd_initiator_tinfo *tinfo;
3124 struct ahd_tmode_tstate *tstate;
3125 u_int old_period;
3126 u_int old_offset;
3127 u_int old_ppr;
3128 int active;
3129 int update_needed;
3130
3131 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
3132 update_needed = 0;
3133
3134 if (period == 0 || offset == 0) {
3135 period = 0;
3136 offset = 0;
3137 }
3138
3139 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
3140 devinfo->target, &tstate);
3141
3142 if ((type & AHD_TRANS_USER) != 0) {
3143 tinfo->user.period = period;
3144 tinfo->user.offset = offset;
3145 tinfo->user.ppr_options = ppr_options;
3146 }
3147
3148 if ((type & AHD_TRANS_GOAL) != 0) {
3149 tinfo->goal.period = period;
3150 tinfo->goal.offset = offset;
3151 tinfo->goal.ppr_options = ppr_options;
3152 }
3153
3154 old_period = tinfo->curr.period;
3155 old_offset = tinfo->curr.offset;
3156 old_ppr = tinfo->curr.ppr_options;
3157
3158 if ((type & AHD_TRANS_CUR) != 0
3159 && (old_period != period
3160 || old_offset != offset
3161 || old_ppr != ppr_options)) {
3162
3163 update_needed++;
3164
3165 tinfo->curr.period = period;
3166 tinfo->curr.offset = offset;
3167 tinfo->curr.ppr_options = ppr_options;
3168
3169 ahd_send_async(ahd, devinfo->channel, devinfo->target,
3170 CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
3171 if (bootverbose) {
3172 if (offset != 0) {
3173 int options;
3174
3175 printf("%s: target %d synchronous with "
3176 "period = 0x%x, offset = 0x%x",
3177 ahd_name(ahd), devinfo->target,
3178 period, offset);
3179 options = 0;
3180 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) {
3181 printf("(RDSTRM");
3182 options++;
3183 }
3184 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
3185 printf("%s", options ? "|DT" : "(DT");
3186 options++;
3187 }
3188 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
3189 printf("%s", options ? "|IU" : "(IU");
3190 options++;
3191 }
3192 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) {
3193 printf("%s", options ? "|RTI" : "(RTI");
3194 options++;
3195 }
3196 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) {
3197 printf("%s", options ? "|QAS" : "(QAS");
3198 options++;
3199 }
3200 if (options != 0)
3201 printf(")\n");
3202 else
3203 printf("\n");
3204 } else {
3205 printf("%s: target %d using "
3206 "asynchronous transfers%s\n",
3207 ahd_name(ahd), devinfo->target,
3208 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0
3209 ? "(QAS)" : "");
3210 }
3211 }
3212 }
3213 /*
3214 * Always refresh the neg-table to handle the case of the
3215 * sequencer setting the ENATNO bit for a MK_MESSAGE request.
3216 * We will always renegotiate in that case if this is a
3217 * packetized request. Also manage the busfree expected flag
3218 * from this common routine so that we catch changes due to
3219 * WDTR or SDTR messages.
3220 */
3221 if ((type & AHD_TRANS_CUR) != 0) {
3222 if (!paused)
3223 ahd_pause(ahd);
3224 ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
3225 if (!paused)
3226 ahd_unpause(ahd);
3227 if (ahd->msg_type != MSG_TYPE_NONE) {
3228 if ((old_ppr & MSG_EXT_PPR_IU_REQ)
3229 != (ppr_options & MSG_EXT_PPR_IU_REQ)) {
3230 #ifdef AHD_DEBUG
3231 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3232 ahd_print_devinfo(ahd, devinfo);
3233 printf("Expecting IU Change busfree\n");
3234 }
3235 #endif
3236 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
3237 | MSG_FLAG_IU_REQ_CHANGED;
3238 }
3239 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) {
3240 #ifdef AHD_DEBUG
3241 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3242 printf("PPR with IU_REQ outstanding\n");
3243 #endif
3244 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE;
3245 }
3246 }
3247 }
3248
3249 update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
3250 tinfo, AHD_NEG_TO_GOAL);
3251
3252 if (update_needed && active)
3253 ahd_update_pending_scbs(ahd);
3254 }
3255
3256 /*
3257 * Update the user/goal/curr tables of wide negotiation
3258 * parameters as well as, in the case of a current or active update,
3259 * any data structures on the host controller. In the case of an
3260 * active update, the specified target is currently talking to us on
3261 * the bus, so the transfer parameter update must take effect
3262 * immediately.
3263 */
3264 void
3265 ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3266 u_int width, u_int type, int paused)
3267 {
3268 struct ahd_initiator_tinfo *tinfo;
3269 struct ahd_tmode_tstate *tstate;
3270 u_int oldwidth;
3271 int active;
3272 int update_needed;
3273
3274 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
3275 update_needed = 0;
3276 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
3277 devinfo->target, &tstate);
3278
3279 if ((type & AHD_TRANS_USER) != 0)
3280 tinfo->user.width = width;
3281
3282 if ((type & AHD_TRANS_GOAL) != 0)
3283 tinfo->goal.width = width;
3284
3285 oldwidth = tinfo->curr.width;
3286 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) {
3287
3288 update_needed++;
3289
3290 tinfo->curr.width = width;
3291 ahd_send_async(ahd, devinfo->channel, devinfo->target,
3292 CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
3293 if (bootverbose) {
3294 printf("%s: target %d using %dbit transfers\n",
3295 ahd_name(ahd), devinfo->target,
3296 8 * (0x01 << width));
3297 }
3298 }
3299
3300 if ((type & AHD_TRANS_CUR) != 0) {
3301 if (!paused)
3302 ahd_pause(ahd);
3303 ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
3304 if (!paused)
3305 ahd_unpause(ahd);
3306 }
3307
3308 update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
3309 tinfo, AHD_NEG_TO_GOAL);
3310 if (update_needed && active)
3311 ahd_update_pending_scbs(ahd);
3312
3313 }
3314
3315 /*
3316 * Update the current state of tagged queuing for a given target.
3317 */
3318 static void
3319 ahd_set_tags(struct ahd_softc *ahd, struct scsi_cmnd *cmd,
3320 struct ahd_devinfo *devinfo, ahd_queue_alg alg)
3321 {
3322 struct scsi_device *sdev = cmd->device;
3323
3324 ahd_platform_set_tags(ahd, sdev, devinfo, alg);
3325 ahd_send_async(ahd, devinfo->channel, devinfo->target,
3326 devinfo->lun, AC_TRANSFER_NEG);
3327 }
3328
3329 static void
3330 ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3331 struct ahd_transinfo *tinfo)
3332 {
3333 ahd_mode_state saved_modes;
3334 u_int period;
3335 u_int ppr_opts;
3336 u_int con_opts;
3337 u_int offset;
3338 u_int saved_negoaddr;
3339 uint8_t iocell_opts[sizeof(ahd->iocell_opts)];
3340
3341 saved_modes = ahd_save_modes(ahd);
3342 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3343
3344 saved_negoaddr = ahd_inb(ahd, NEGOADDR);
3345 ahd_outb(ahd, NEGOADDR, devinfo->target);
3346 period = tinfo->period;
3347 offset = tinfo->offset;
3348 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts));
3349 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ
3350 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI);
3351 con_opts = 0;
3352 if (period == 0)
3353 period = AHD_SYNCRATE_ASYNC;
3354 if (period == AHD_SYNCRATE_160) {
3355
3356 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) {
3357 /*
3358 * When the SPI4 spec was finalized, PACE transfers
3359 * was not made a configurable option in the PPR
3360 * message. Instead it is assumed to be enabled for
3361 * any syncrate faster than 80MHz. Nevertheless,
3362 * Harpoon2A4 allows this to be configurable.
3363 *
3364 * Harpoon2A4 also assumes at most 2 data bytes per
3365 * negotiated REQ/ACK offset. Paced transfers take
3366 * 4, so we must adjust our offset.
3367 */
3368 ppr_opts |= PPROPT_PACE;
3369 offset *= 2;
3370
3371 /*
3372 * Harpoon2A assumed that there would be a
3373 * fallback rate between 160MHz and 80Mhz,
3374 * so 7 is used as the period factor rather
3375 * than 8 for 160MHz.
3376 */
3377 period = AHD_SYNCRATE_REVA_160;
3378 }
3379 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0)
3380 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &=
3381 ~AHD_PRECOMP_MASK;
3382 } else {
3383 /*
3384 * Precomp should be disabled for non-paced transfers.
3385 */
3386 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK;
3387
3388 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0
3389 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0
3390 && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) {
3391 /*
3392 * Slow down our CRC interval to be
3393 * compatible with non-packetized
3394 * U160 devices that can't handle a
3395 * CRC at full speed.
3396 */
3397 con_opts |= ENSLOWCRC;
3398 }
3399
3400 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) {
3401 /*
3402 * On H2A4, revert to a slower slewrate
3403 * on non-paced transfers.
3404 */
3405 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &=
3406 ~AHD_SLEWRATE_MASK;
3407 }
3408 }
3409
3410 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW);
3411 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]);
3412 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE);
3413 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]);
3414
3415 ahd_outb(ahd, NEGPERIOD, period);
3416 ahd_outb(ahd, NEGPPROPTS, ppr_opts);
3417 ahd_outb(ahd, NEGOFFSET, offset);
3418
3419 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT)
3420 con_opts |= WIDEXFER;
3421
3422 /*
3423 * Slow down our CRC interval to be
3424 * compatible with packetized U320 devices
3425 * that can't handle a CRC at full speed
3426 */
3427 if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
3428 con_opts |= ENSLOWCRC;
3429 }
3430
3431 /*
3432 * During packetized transfers, the target will
3433 * give us the oportunity to send command packets
3434 * without us asserting attention.
3435 */
3436 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
3437 con_opts |= ENAUTOATNO;
3438 ahd_outb(ahd, NEGCONOPTS, con_opts);
3439 ahd_outb(ahd, NEGOADDR, saved_negoaddr);
3440 ahd_restore_modes(ahd, saved_modes);
3441 }
3442
3443 /*
3444 * When the transfer settings for a connection change, setup for
3445 * negotiation in pending SCBs to effect the change as quickly as
3446 * possible. We also cancel any negotiations that are scheduled
3447 * for inflight SCBs that have not been started yet.
3448 */
3449 static void
3450 ahd_update_pending_scbs(struct ahd_softc *ahd)
3451 {
3452 struct scb *pending_scb;
3453 int pending_scb_count;
3454 int paused;
3455 u_int saved_scbptr;
3456 ahd_mode_state saved_modes;
3457
3458 /*
3459 * Traverse the pending SCB list and ensure that all of the
3460 * SCBs there have the proper settings. We can only safely
3461 * clear the negotiation required flag (setting requires the
3462 * execution queue to be modified) and this is only possible
3463 * if we are not already attempting to select out for this
3464 * SCB. For this reason, all callers only call this routine
3465 * if we are changing the negotiation settings for the currently
3466 * active transaction on the bus.
3467 */
3468 pending_scb_count = 0;
3469 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
3470 struct ahd_devinfo devinfo;
3471 struct ahd_initiator_tinfo *tinfo;
3472 struct ahd_tmode_tstate *tstate;
3473
3474 ahd_scb_devinfo(ahd, &devinfo, pending_scb);
3475 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
3476 devinfo.our_scsiid,
3477 devinfo.target, &tstate);
3478 if ((tstate->auto_negotiate & devinfo.target_mask) == 0
3479 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
3480 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
3481 pending_scb->hscb->control &= ~MK_MESSAGE;
3482 }
3483 ahd_sync_scb(ahd, pending_scb,
3484 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
3485 pending_scb_count++;
3486 }
3487
3488 if (pending_scb_count == 0)
3489 return;
3490
3491 if (ahd_is_paused(ahd)) {
3492 paused = 1;
3493 } else {
3494 paused = 0;
3495 ahd_pause(ahd);
3496 }
3497
3498 /*
3499 * Force the sequencer to reinitialize the selection for
3500 * the command at the head of the execution queue if it
3501 * has already been setup. The negotiation changes may
3502 * effect whether we select-out with ATN. It is only
3503 * safe to clear ENSELO when the bus is not free and no
3504 * selection is in progres or completed.
3505 */
3506 saved_modes = ahd_save_modes(ahd);
3507 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3508 if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0
3509 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0)
3510 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
3511 saved_scbptr = ahd_get_scbptr(ahd);
3512 /* Ensure that the hscbs down on the card match the new information */
3513 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
3514 u_int scb_tag;
3515 u_int control;
3516
3517 scb_tag = SCB_GET_TAG(pending_scb);
3518 ahd_set_scbptr(ahd, scb_tag);
3519 control = ahd_inb_scbram(ahd, SCB_CONTROL);
3520 control &= ~MK_MESSAGE;
3521 control |= pending_scb->hscb->control & MK_MESSAGE;
3522 ahd_outb(ahd, SCB_CONTROL, control);
3523 }
3524 ahd_set_scbptr(ahd, saved_scbptr);
3525 ahd_restore_modes(ahd, saved_modes);
3526
3527 if (paused == 0)
3528 ahd_unpause(ahd);
3529 }
3530
3531 /**************************** Pathing Information *****************************/
3532 static void
3533 ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3534 {
3535 ahd_mode_state saved_modes;
3536 u_int saved_scsiid;
3537 role_t role;
3538 int our_id;
3539
3540 saved_modes = ahd_save_modes(ahd);
3541 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3542
3543 if (ahd_inb(ahd, SSTAT0) & TARGET)
3544 role = ROLE_TARGET;
3545 else
3546 role = ROLE_INITIATOR;
3547
3548 if (role == ROLE_TARGET
3549 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) {
3550 /* We were selected, so pull our id from TARGIDIN */
3551 our_id = ahd_inb(ahd, TARGIDIN) & OID;
3552 } else if (role == ROLE_TARGET)
3553 our_id = ahd_inb(ahd, TOWNID);
3554 else
3555 our_id = ahd_inb(ahd, IOWNID);
3556
3557 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
3558 ahd_compile_devinfo(devinfo,
3559 our_id,
3560 SCSIID_TARGET(ahd, saved_scsiid),
3561 ahd_inb(ahd, SAVED_LUN),
3562 SCSIID_CHANNEL(ahd, saved_scsiid),
3563 role);
3564 ahd_restore_modes(ahd, saved_modes);
3565 }
3566
3567 void
3568 ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3569 {
3570 printf("%s:%c:%d:%d: ", ahd_name(ahd), 'A',
3571 devinfo->target, devinfo->lun);
3572 }
3573
3574 static struct ahd_phase_table_entry*
3575 ahd_lookup_phase_entry(int phase)
3576 {
3577 struct ahd_phase_table_entry *entry;
3578 struct ahd_phase_table_entry *last_entry;
3579
3580 /*
3581 * num_phases doesn't include the default entry which
3582 * will be returned if the phase doesn't match.
3583 */
3584 last_entry = &ahd_phase_table[num_phases];
3585 for (entry = ahd_phase_table; entry < last_entry; entry++) {
3586 if (phase == entry->phase)
3587 break;
3588 }
3589 return (entry);
3590 }
3591
3592 void
3593 ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target,
3594 u_int lun, char channel, role_t role)
3595 {
3596 devinfo->our_scsiid = our_id;
3597 devinfo->target = target;
3598 devinfo->lun = lun;
3599 devinfo->target_offset = target;
3600 devinfo->channel = channel;
3601 devinfo->role = role;
3602 if (channel == 'B')
3603 devinfo->target_offset += 8;
3604 devinfo->target_mask = (0x01 << devinfo->target_offset);
3605 }
3606
3607 static void
3608 ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3609 struct scb *scb)
3610 {
3611 role_t role;
3612 int our_id;
3613
3614 our_id = SCSIID_OUR_ID(scb->hscb->scsiid);
3615 role = ROLE_INITIATOR;
3616 if ((scb->hscb->control & TARGET_SCB) != 0)
3617 role = ROLE_TARGET;
3618 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb),
3619 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role);
3620 }
3621
3622
3623 /************************ Message Phase Processing ****************************/
3624 /*
3625 * When an initiator transaction with the MK_MESSAGE flag either reconnects
3626 * or enters the initial message out phase, we are interrupted. Fill our
3627 * outgoing message buffer with the appropriate message and beging handing
3628 * the message phase(s) manually.
3629 */
3630 static void
3631 ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3632 struct scb *scb)
3633 {
3634 /*
3635 * To facilitate adding multiple messages together,
3636 * each routine should increment the index and len
3637 * variables instead of setting them explicitly.
3638 */
3639 ahd->msgout_index = 0;
3640 ahd->msgout_len = 0;
3641
3642 if (ahd_currently_packetized(ahd))
3643 ahd->msg_flags |= MSG_FLAG_PACKETIZED;
3644
3645 if (ahd->send_msg_perror
3646 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) {
3647 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror;
3648 ahd->msgout_len++;
3649 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3650 #ifdef AHD_DEBUG
3651 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3652 printf("Setting up for Parity Error delivery\n");
3653 #endif
3654 return;
3655 } else if (scb == NULL) {
3656 printf("%s: WARNING. No pending message for "
3657 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd));
3658 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP;
3659 ahd->msgout_len++;
3660 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3661 return;
3662 }
3663
3664 if ((scb->flags & SCB_DEVICE_RESET) == 0
3665 && (scb->flags & SCB_PACKETIZED) == 0
3666 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) {
3667 u_int identify_msg;
3668
3669 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb);
3670 if ((scb->hscb->control & DISCENB) != 0)
3671 identify_msg |= MSG_IDENTIFY_DISCFLAG;
3672 ahd->msgout_buf[ahd->msgout_index++] = identify_msg;
3673 ahd->msgout_len++;
3674
3675 if ((scb->hscb->control & TAG_ENB) != 0) {
3676 ahd->msgout_buf[ahd->msgout_index++] =
3677 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE);
3678 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb);
3679 ahd->msgout_len += 2;
3680 }
3681 }
3682
3683 if (scb->flags & SCB_DEVICE_RESET) {
3684 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET;
3685 ahd->msgout_len++;
3686 ahd_print_path(ahd, scb);
3687 printf("Bus Device Reset Message Sent\n");
3688 /*
3689 * Clear our selection hardware in advance of
3690 * the busfree. We may have an entry in the waiting
3691 * Q for this target, and we don't want to go about
3692 * selecting while we handle the busfree and blow it
3693 * away.
3694 */
3695 ahd_outb(ahd, SCSISEQ0, 0);
3696 } else if ((scb->flags & SCB_ABORT) != 0) {
3697
3698 if ((scb->hscb->control & TAG_ENB) != 0) {
3699 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG;
3700 } else {
3701 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT;
3702 }
3703 ahd->msgout_len++;
3704 ahd_print_path(ahd, scb);
3705 printf("Abort%s Message Sent\n",
3706 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : "");
3707 /*
3708 * Clear our selection hardware in advance of
3709 * the busfree. We may have an entry in the waiting
3710 * Q for this target, and we don't want to go about
3711 * selecting while we handle the busfree and blow it
3712 * away.
3713 */
3714 ahd_outb(ahd, SCSISEQ0, 0);
3715 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) {
3716 ahd_build_transfer_msg(ahd, devinfo);
3717 /*
3718 * Clear our selection hardware in advance of potential
3719 * PPR IU status change busfree. We may have an entry in
3720 * the waiting Q for this target, and we don't want to go
3721 * about selecting while we handle the busfree and blow
3722 * it away.
3723 */
3724 ahd_outb(ahd, SCSISEQ0, 0);
3725 } else {
3726 printf("ahd_intr: AWAITING_MSG for an SCB that "
3727 "does not have a waiting message\n");
3728 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
3729 devinfo->target_mask);
3730 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x "
3731 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control,
3732 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT),
3733 scb->flags);
3734 }
3735
3736 /*
3737 * Clear the MK_MESSAGE flag from the SCB so we aren't
3738 * asked to send this message again.
3739 */
3740 ahd_outb(ahd, SCB_CONTROL,
3741 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
3742 scb->hscb->control &= ~MK_MESSAGE;
3743 ahd->msgout_index = 0;
3744 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3745 }
3746
3747 /*
3748 * Build an appropriate transfer negotiation message for the
3749 * currently active target.
3750 */
3751 static void
3752 ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3753 {
3754 /*
3755 * We need to initiate transfer negotiations.
3756 * If our current and goal settings are identical,
3757 * we want to renegotiate due to a check condition.
3758 */
3759 struct ahd_initiator_tinfo *tinfo;
3760 struct ahd_tmode_tstate *tstate;
3761 int dowide;
3762 int dosync;
3763 int doppr;
3764 u_int period;
3765 u_int ppr_options;
3766 u_int offset;
3767
3768 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
3769 devinfo->target, &tstate);
3770 /*
3771 * Filter our period based on the current connection.
3772 * If we can't perform DT transfers on this segment (not in LVD
3773 * mode for instance), then our decision to issue a PPR message
3774 * may change.
3775 */
3776 period = tinfo->goal.period;
3777 offset = tinfo->goal.offset;
3778 ppr_options = tinfo->goal.ppr_options;
3779 /* Target initiated PPR is not allowed in the SCSI spec */
3780 if (devinfo->role == ROLE_TARGET)
3781 ppr_options = 0;
3782 ahd_devlimited_syncrate(ahd, tinfo, &period,
3783 &ppr_options, devinfo->role);
3784 dowide = tinfo->curr.width != tinfo->goal.width;
3785 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period;
3786 /*
3787 * Only use PPR if we have options that need it, even if the device
3788 * claims to support it. There might be an expander in the way
3789 * that doesn't.
3790 */
3791 doppr = ppr_options != 0;
3792
3793 if (!dowide && !dosync && !doppr) {
3794 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT;
3795 dosync = tinfo->goal.offset != 0;
3796 }
3797
3798 if (!dowide && !dosync && !doppr) {
3799 /*
3800 * Force async with a WDTR message if we have a wide bus,
3801 * or just issue an SDTR with a 0 offset.
3802 */
3803 if ((ahd->features & AHD_WIDE) != 0)
3804 dowide = 1;
3805 else
3806 dosync = 1;
3807
3808 if (bootverbose) {
3809 ahd_print_devinfo(ahd, devinfo);
3810 printf("Ensuring async\n");
3811 }
3812 }
3813 /* Target initiated PPR is not allowed in the SCSI spec */
3814 if (devinfo->role == ROLE_TARGET)
3815 doppr = 0;
3816
3817 /*
3818 * Both the PPR message and SDTR message require the
3819 * goal syncrate to be limited to what the target device
3820 * is capable of handling (based on whether an LVD->SE
3821 * expander is on the bus), so combine these two cases.
3822 * Regardless, guarantee that if we are using WDTR and SDTR
3823 * messages that WDTR comes first.
3824 */
3825 if (doppr || (dosync && !dowide)) {
3826
3827 offset = tinfo->goal.offset;
3828 ahd_validate_offset(ahd, tinfo, period, &offset,
3829 doppr ? tinfo->goal.width
3830 : tinfo->curr.width,
3831 devinfo->role);
3832 if (doppr) {
3833 ahd_construct_ppr(ahd, devinfo, period, offset,
3834 tinfo->goal.width, ppr_options);
3835 } else {
3836 ahd_construct_sdtr(ahd, devinfo, period, offset);
3837 }
3838 } else {
3839 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width);
3840 }
3841 }
3842
3843 /*
3844 * Build a synchronous negotiation message in our message
3845 * buffer based on the input parameters.
3846 */
3847 static void
3848 ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3849 u_int period, u_int offset)
3850 {
3851 if (offset == 0)
3852 period = AHD_ASYNC_XFER_PERIOD;
3853 ahd->msgout_index += spi_populate_sync_msg(
3854 ahd->msgout_buf + ahd->msgout_index, period, offset);
3855 ahd->msgout_len += 5;
3856 if (bootverbose) {
3857 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
3858 ahd_name(ahd), devinfo->channel, devinfo->target,
3859 devinfo->lun, period, offset);
3860 }
3861 }
3862
3863 /*
3864 * Build a wide negotiateion message in our message
3865 * buffer based on the input parameters.
3866 */
3867 static void
3868 ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3869 u_int bus_width)
3870 {
3871 ahd->msgout_index += spi_populate_width_msg(
3872 ahd->msgout_buf + ahd->msgout_index, bus_width);
3873 ahd->msgout_len += 4;
3874 if (bootverbose) {
3875 printf("(%s:%c:%d:%d): Sending WDTR %x\n",
3876 ahd_name(ahd), devinfo->channel, devinfo->target,
3877 devinfo->lun, bus_width);
3878 }
3879 }
3880
3881 /*
3882 * Build a parallel protocol request message in our message
3883 * buffer based on the input parameters.
3884 */
3885 static void
3886 ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3887 u_int period, u_int offset, u_int bus_width,
3888 u_int ppr_options)
3889 {
3890 /*
3891 * Always request precompensation from
3892 * the other target if we are running
3893 * at paced syncrates.
3894 */
3895 if (period <= AHD_SYNCRATE_PACED)
3896 ppr_options |= MSG_EXT_PPR_PCOMP_EN;
3897 if (offset == 0)
3898 period = AHD_ASYNC_XFER_PERIOD;
3899 ahd->msgout_index += spi_populate_ppr_msg(
3900 ahd->msgout_buf + ahd->msgout_index, period, offset,
3901 bus_width, ppr_options);
3902 ahd->msgout_len += 8;
3903 if (bootverbose) {
3904 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, "
3905 "offset %x, ppr_options %x\n", ahd_name(ahd),
3906 devinfo->channel, devinfo->target, devinfo->lun,
3907 bus_width, period, offset, ppr_options);
3908 }
3909 }
3910
3911 /*
3912 * Clear any active message state.
3913 */
3914 static void
3915 ahd_clear_msg_state(struct ahd_softc *ahd)
3916 {
3917 ahd_mode_state saved_modes;
3918
3919 saved_modes = ahd_save_modes(ahd);
3920 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3921 ahd->send_msg_perror = 0;
3922 ahd->msg_flags = MSG_FLAG_NONE;
3923 ahd->msgout_len = 0;
3924 ahd->msgin_index = 0;
3925 ahd->msg_type = MSG_TYPE_NONE;
3926 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
3927 /*
3928 * The target didn't care to respond to our
3929 * message request, so clear ATN.
3930 */
3931 ahd_outb(ahd, CLRSINT1, CLRATNO);
3932 }
3933 ahd_outb(ahd, MSG_OUT, MSG_NOOP);
3934 ahd_outb(ahd, SEQ_FLAGS2,
3935 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING);
3936 ahd_restore_modes(ahd, saved_modes);
3937 }
3938
3939 /*
3940 * Manual message loop handler.
3941 */
3942 static void
3943 ahd_handle_message_phase(struct ahd_softc *ahd)
3944 {
3945 struct ahd_devinfo devinfo;
3946 u_int bus_phase;
3947 int end_session;
3948
3949 ahd_fetch_devinfo(ahd, &devinfo);
3950 end_session = FALSE;
3951 bus_phase = ahd_inb(ahd, LASTPHASE);
3952
3953 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) {
3954 printf("LQIRETRY for LQIPHASE_OUTPKT\n");
3955 ahd_outb(ahd, LQCTL2, LQIRETRY);
3956 }
3957 reswitch:
3958 switch (ahd->msg_type) {
3959 case MSG_TYPE_INITIATOR_MSGOUT:
3960 {
3961 int lastbyte;
3962 int phasemis;
3963 int msgdone;
3964
3965 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0)
3966 panic("HOST_MSG_LOOP interrupt with no active message");
3967
3968 #ifdef AHD_DEBUG
3969 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3970 ahd_print_devinfo(ahd, &devinfo);
3971 printf("INITIATOR_MSG_OUT");
3972 }
3973 #endif
3974 phasemis = bus_phase != P_MESGOUT;
3975 if (phasemis) {
3976 #ifdef AHD_DEBUG
3977 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3978 printf(" PHASEMIS %s\n",
3979 ahd_lookup_phase_entry(bus_phase)
3980 ->phasemsg);
3981 }
3982 #endif
3983 if (bus_phase == P_MESGIN) {
3984 /*
3985 * Change gears and see if
3986 * this messages is of interest to
3987 * us or should be passed back to
3988 * the sequencer.
3989 */
3990 ahd_outb(ahd, CLRSINT1, CLRATNO);
3991 ahd->send_msg_perror = 0;
3992 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN;
3993 ahd->msgin_index = 0;
3994 goto reswitch;
3995 }
3996 end_session = TRUE;
3997 break;
3998 }
3999
4000 if (ahd->send_msg_perror) {
4001 ahd_outb(ahd, CLRSINT1, CLRATNO);
4002 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
4003 #ifdef AHD_DEBUG
4004 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4005 printf(" byte 0x%x\n", ahd->send_msg_perror);
4006 #endif
4007 /*
4008 * If we are notifying the target of a CRC error
4009 * during packetized operations, the target is
4010 * within its rights to acknowledge our message
4011 * with a busfree.
4012 */
4013 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0
4014 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR)
4015 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE;
4016
4017 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror);
4018 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
4019 break;
4020 }
4021
4022 msgdone = ahd->msgout_index == ahd->msgout_len;
4023 if (msgdone) {
4024 /*
4025 * The target has requested a retry.
4026 * Re-assert ATN, reset our message index to
4027 * 0, and try again.
4028 */
4029 ahd->msgout_index = 0;
4030 ahd_assert_atn(ahd);
4031 }
4032
4033 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1);
4034 if (lastbyte) {
4035 /* Last byte is signified by dropping ATN */
4036 ahd_outb(ahd, CLRSINT1, CLRATNO);
4037 }
4038
4039 /*
4040 * Clear our interrupt status and present
4041 * the next byte on the bus.
4042 */
4043 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
4044 #ifdef AHD_DEBUG
4045 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4046 printf(" byte 0x%x\n",
4047 ahd->msgout_buf[ahd->msgout_index]);
4048 #endif
4049 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]);
4050 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
4051 break;
4052 }
4053 case MSG_TYPE_INITIATOR_MSGIN:
4054 {
4055 int phasemis;
4056 int message_done;
4057
4058 #ifdef AHD_DEBUG
4059 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
4060 ahd_print_devinfo(ahd, &devinfo);
4061 printf("INITIATOR_MSG_IN");
4062 }
4063 #endif
4064 phasemis = bus_phase != P_MESGIN;
4065 if (phasemis) {
4066 #ifdef AHD_DEBUG
4067 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
4068 printf(" PHASEMIS %s\n",
4069 ahd_lookup_phase_entry(bus_phase)
4070 ->phasemsg);
4071 }
4072 #endif
4073 ahd->msgin_index = 0;
4074 if (bus_phase == P_MESGOUT
4075 && (ahd->send_msg_perror != 0
4076 || (ahd->msgout_len != 0
4077 && ahd->msgout_index == 0))) {
4078 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
4079 goto reswitch;
4080 }
4081 end_session = TRUE;
4082 break;
4083 }
4084
4085 /* Pull the byte in without acking it */
4086 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS);
4087 #ifdef AHD_DEBUG
4088 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4089 printf(" byte 0x%x\n",
4090 ahd->msgin_buf[ahd->msgin_index]);
4091 #endif
4092
4093 message_done = ahd_parse_msg(ahd, &devinfo);
4094
4095 if (message_done) {
4096 /*
4097 * Clear our incoming message buffer in case there
4098 * is another message following this one.
4099 */
4100 ahd->msgin_index = 0;
4101
4102 /*
4103 * If this message illicited a response,
4104 * assert ATN so the target takes us to the
4105 * message out phase.
4106 */
4107 if (ahd->msgout_len != 0) {
4108 #ifdef AHD_DEBUG
4109 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
4110 ahd_print_devinfo(ahd, &devinfo);
4111 printf("Asserting ATN for response\n");
4112 }
4113 #endif
4114 ahd_assert_atn(ahd);
4115 }
4116 } else
4117 ahd->msgin_index++;
4118
4119 if (message_done == MSGLOOP_TERMINATED) {
4120 end_session = TRUE;
4121 } else {
4122 /* Ack the byte */
4123 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
4124 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ);
4125 }
4126 break;
4127 }
4128 case MSG_TYPE_TARGET_MSGIN:
4129 {
4130 int msgdone;
4131 int msgout_request;
4132
4133 /*
4134 * By default, the message loop will continue.
4135 */
4136 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
4137
4138 if (ahd->msgout_len == 0)
4139 panic("Target MSGIN with no active message");
4140
4141 /*
4142 * If we interrupted a mesgout session, the initiator
4143 * will not know this until our first REQ. So, we
4144 * only honor mesgout requests after we've sent our
4145 * first byte.
4146 */
4147 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0
4148 && ahd->msgout_index > 0)
4149 msgout_request = TRUE;
4150 else
4151 msgout_request = FALSE;
4152
4153 if (msgout_request) {
4154
4155 /*
4156 * Change gears and see if
4157 * this messages is of interest to
4158 * us or should be passed back to
4159 * the sequencer.
4160 */
4161 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT;
4162 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO);
4163 ahd->msgin_index = 0;
4164 /* Dummy read to REQ for first byte */
4165 ahd_inb(ahd, SCSIDAT);
4166 ahd_outb(ahd, SXFRCTL0,
4167 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4168 break;
4169 }
4170
4171 msgdone = ahd->msgout_index == ahd->msgout_len;
4172 if (msgdone) {
4173 ahd_outb(ahd, SXFRCTL0,
4174 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
4175 end_session = TRUE;
4176 break;
4177 }
4178
4179 /*
4180 * Present the next byte on the bus.
4181 */
4182 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4183 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]);
4184 break;
4185 }
4186 case MSG_TYPE_TARGET_MSGOUT:
4187 {
4188 int lastbyte;
4189 int msgdone;
4190
4191 /*
4192 * By default, the message loop will continue.
4193 */
4194 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
4195
4196 /*
4197 * The initiator signals that this is
4198 * the last byte by dropping ATN.
4199 */
4200 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0;
4201
4202 /*
4203 * Read the latched byte, but turn off SPIOEN first
4204 * so that we don't inadvertently cause a REQ for the
4205 * next byte.
4206 */
4207 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
4208 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT);
4209 msgdone = ahd_parse_msg(ahd, &devinfo);
4210 if (msgdone == MSGLOOP_TERMINATED) {
4211 /*
4212 * The message is *really* done in that it caused
4213 * us to go to bus free. The sequencer has already
4214 * been reset at this point, so pull the ejection
4215 * handle.
4216 */
4217 return;
4218 }
4219
4220 ahd->msgin_index++;
4221
4222 /*
4223 * XXX Read spec about initiator dropping ATN too soon
4224 * and use msgdone to detect it.
4225 */
4226 if (msgdone == MSGLOOP_MSGCOMPLETE) {
4227 ahd->msgin_index = 0;
4228
4229 /*
4230 * If this message illicited a response, transition
4231 * to the Message in phase and send it.
4232 */
4233 if (ahd->msgout_len != 0) {
4234 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO);
4235 ahd_outb(ahd, SXFRCTL0,
4236 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4237 ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
4238 ahd->msgin_index = 0;
4239 break;
4240 }
4241 }
4242
4243 if (lastbyte)
4244 end_session = TRUE;
4245 else {
4246 /* Ask for the next byte. */
4247 ahd_outb(ahd, SXFRCTL0,
4248 ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4249 }
4250
4251 break;
4252 }
4253 default:
4254 panic("Unknown REQINIT message type");
4255 }
4256
4257 if (end_session) {
4258 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) {
4259 printf("%s: Returning to Idle Loop\n",
4260 ahd_name(ahd));
4261 ahd_clear_msg_state(ahd);
4262
4263 /*
4264 * Perform the equivalent of a clear_target_state.
4265 */
4266 ahd_outb(ahd, LASTPHASE, P_BUSFREE);
4267 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT);
4268 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
4269 } else {
4270 ahd_clear_msg_state(ahd);
4271 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP);
4272 }
4273 }
4274 }
4275
4276 /*
4277 * See if we sent a particular extended message to the target.
4278 * If "full" is true, return true only if the target saw the full
4279 * message. If "full" is false, return true if the target saw at
4280 * least the first byte of the message.
4281 */
4282 static int
4283 ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full)
4284 {
4285 int found;
4286 u_int index;
4287
4288 found = FALSE;
4289 index = 0;
4290
4291 while (index < ahd->msgout_len) {
4292 if (ahd->msgout_buf[index] == MSG_EXTENDED) {
4293 u_int end_index;
4294
4295 end_index = index + 1 + ahd->msgout_buf[index + 1];
4296 if (ahd->msgout_buf[index+2] == msgval
4297 && type == AHDMSG_EXT) {
4298
4299 if (full) {
4300 if (ahd->msgout_index > end_index)
4301 found = TRUE;
4302 } else if (ahd->msgout_index > index)
4303 found = TRUE;
4304 }
4305 index = end_index;
4306 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK
4307 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) {
4308
4309 /* Skip tag type and tag id or residue param*/
4310 index += 2;
4311 } else {
4312 /* Single byte message */
4313 if (type == AHDMSG_1B
4314 && ahd->msgout_index > index
4315 && (ahd->msgout_buf[index] == msgval
4316 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0
4317 && msgval == MSG_IDENTIFYFLAG)))
4318 found = TRUE;
4319 index++;
4320 }
4321
4322 if (found)
4323 break;
4324 }
4325 return (found);
4326 }
4327
4328 /*
4329 * Wait for a complete incoming message, parse it, and respond accordingly.
4330 */
4331 static int
4332 ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4333 {
4334 struct ahd_initiator_tinfo *tinfo;
4335 struct ahd_tmode_tstate *tstate;
4336 int reject;
4337 int done;
4338 int response;
4339
4340 done = MSGLOOP_IN_PROG;
4341 response = FALSE;
4342 reject = FALSE;
4343 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
4344 devinfo->target, &tstate);
4345
4346 /*
4347 * Parse as much of the message as is available,
4348 * rejecting it if we don't support it. When
4349 * the entire message is available and has been
4350 * handled, return MSGLOOP_MSGCOMPLETE, indicating
4351 * that we have parsed an entire message.
4352 *
4353 * In the case of extended messages, we accept the length
4354 * byte outright and perform more checking once we know the
4355 * extended message type.
4356 */
4357 switch (ahd->msgin_buf[0]) {
4358 case MSG_DISCONNECT:
4359 case MSG_SAVEDATAPOINTER:
4360 case MSG_CMDCOMPLETE:
4361 case MSG_RESTOREPOINTERS:
4362 case MSG_IGN_WIDE_RESIDUE:
4363 /*
4364 * End our message loop as these are messages
4365 * the sequencer handles on its own.
4366 */
4367 done = MSGLOOP_TERMINATED;
4368 break;
4369 case MSG_MESSAGE_REJECT:
4370 response = ahd_handle_msg_reject(ahd, devinfo);
4371 /* FALLTHROUGH */
4372 case MSG_NOOP:
4373 done = MSGLOOP_MSGCOMPLETE;
4374 break;
4375 case MSG_EXTENDED:
4376 {
4377 /* Wait for enough of the message to begin validation */
4378 if (ahd->msgin_index < 2)
4379 break;
4380 switch (ahd->msgin_buf[2]) {
4381 case MSG_EXT_SDTR:
4382 {
4383 u_int period;
4384 u_int ppr_options;
4385 u_int offset;
4386 u_int saved_offset;
4387
4388 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) {
4389 reject = TRUE;
4390 break;
4391 }
4392
4393 /*
4394 * Wait until we have both args before validating
4395 * and acting on this message.
4396 *
4397 * Add one to MSG_EXT_SDTR_LEN to account for
4398 * the extended message preamble.
4399 */
4400 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1))
4401 break;
4402
4403 period = ahd->msgin_buf[3];
4404 ppr_options = 0;
4405 saved_offset = offset = ahd->msgin_buf[4];
4406 ahd_devlimited_syncrate(ahd, tinfo, &period,
4407 &ppr_options, devinfo->role);
4408 ahd_validate_offset(ahd, tinfo, period, &offset,
4409 tinfo->curr.width, devinfo->role);
4410 if (bootverbose) {
4411 printf("(%s:%c:%d:%d): Received "
4412 "SDTR period %x, offset %x\n\t"
4413 "Filtered to period %x, offset %x\n",
4414 ahd_name(ahd), devinfo->channel,
4415 devinfo->target, devinfo->lun,
4416 ahd->msgin_buf[3], saved_offset,
4417 period, offset);
4418 }
4419 ahd_set_syncrate(ahd, devinfo, period,
4420 offset, ppr_options,
4421 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4422 /*paused*/TRUE);
4423
4424 /*
4425 * See if we initiated Sync Negotiation
4426 * and didn't have to fall down to async
4427 * transfers.
4428 */
4429 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) {
4430 /* We started it */
4431 if (saved_offset != offset) {
4432 /* Went too low - force async */
4433 reject = TRUE;
4434 }
4435 } else {
4436 /*
4437 * Send our own SDTR in reply
4438 */
4439 if (bootverbose
4440 && devinfo->role == ROLE_INITIATOR) {
4441 printf("(%s:%c:%d:%d): Target "
4442 "Initiated SDTR\n",
4443 ahd_name(ahd), devinfo->channel,
4444 devinfo->target, devinfo->lun);
4445 }
4446 ahd->msgout_index = 0;
4447 ahd->msgout_len = 0;
4448 ahd_construct_sdtr(ahd, devinfo,
4449 period, offset);
4450 ahd->msgout_index = 0;
4451 response = TRUE;
4452 }
4453 done = MSGLOOP_MSGCOMPLETE;
4454 break;
4455 }
4456 case MSG_EXT_WDTR:
4457 {
4458 u_int bus_width;
4459 u_int saved_width;
4460 u_int sending_reply;
4461
4462 sending_reply = FALSE;
4463 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) {
4464 reject = TRUE;
4465 break;
4466 }
4467
4468 /*
4469 * Wait until we have our arg before validating
4470 * and acting on this message.
4471 *
4472 * Add one to MSG_EXT_WDTR_LEN to account for
4473 * the extended message preamble.
4474 */
4475 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1))
4476 break;
4477
4478 bus_width = ahd->msgin_buf[3];
4479 saved_width = bus_width;
4480 ahd_validate_width(ahd, tinfo, &bus_width,
4481 devinfo->role);
4482 if (bootverbose) {
4483 printf("(%s:%c:%d:%d): Received WDTR "
4484 "%x filtered to %x\n",
4485 ahd_name(ahd), devinfo->channel,
4486 devinfo->target, devinfo->lun,
4487 saved_width, bus_width);
4488 }
4489
4490 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) {
4491 /*
4492 * Don't send a WDTR back to the
4493 * target, since we asked first.
4494 * If the width went higher than our
4495 * request, reject it.
4496 */
4497 if (saved_width > bus_width) {
4498 reject = TRUE;
4499 printf("(%s:%c:%d:%d): requested %dBit "
4500 "transfers. Rejecting...\n",
4501 ahd_name(ahd), devinfo->channel,
4502 devinfo->target, devinfo->lun,
4503 8 * (0x01 << bus_width));
4504 bus_width = 0;
4505 }
4506 } else {
4507 /*
4508 * Send our own WDTR in reply
4509 */
4510 if (bootverbose
4511 && devinfo->role == ROLE_INITIATOR) {
4512 printf("(%s:%c:%d:%d): Target "
4513 "Initiated WDTR\n",
4514 ahd_name(ahd), devinfo->channel,
4515 devinfo->target, devinfo->lun);
4516 }
4517 ahd->msgout_index = 0;
4518 ahd->msgout_len = 0;
4519 ahd_construct_wdtr(ahd, devinfo, bus_width);
4520 ahd->msgout_index = 0;
4521 response = TRUE;
4522 sending_reply = TRUE;
4523 }
4524 /*
4525 * After a wide message, we are async, but
4526 * some devices don't seem to honor this portion
4527 * of the spec. Force a renegotiation of the
4528 * sync component of our transfer agreement even
4529 * if our goal is async. By updating our width
4530 * after forcing the negotiation, we avoid
4531 * renegotiating for width.
4532 */
4533 ahd_update_neg_request(ahd, devinfo, tstate,
4534 tinfo, AHD_NEG_ALWAYS);
4535 ahd_set_width(ahd, devinfo, bus_width,
4536 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4537 /*paused*/TRUE);
4538 if (sending_reply == FALSE && reject == FALSE) {
4539
4540 /*
4541 * We will always have an SDTR to send.
4542 */
4543 ahd->msgout_index = 0;
4544 ahd->msgout_len = 0;
4545 ahd_build_transfer_msg(ahd, devinfo);
4546 ahd->msgout_index = 0;
4547 response = TRUE;
4548 }
4549 done = MSGLOOP_MSGCOMPLETE;
4550 break;
4551 }
4552 case MSG_EXT_PPR:
4553 {
4554 u_int period;
4555 u_int offset;
4556 u_int bus_width;
4557 u_int ppr_options;
4558 u_int saved_width;
4559 u_int saved_offset;
4560 u_int saved_ppr_options;
4561
4562 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) {
4563 reject = TRUE;
4564 break;
4565 }
4566
4567 /*
4568 * Wait until we have all args before validating
4569 * and acting on this message.
4570 *
4571 * Add one to MSG_EXT_PPR_LEN to account for
4572 * the extended message preamble.
4573 */
4574 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1))
4575 break;
4576
4577 period = ahd->msgin_buf[3];
4578 offset = ahd->msgin_buf[5];
4579 bus_width = ahd->msgin_buf[6];
4580 saved_width = bus_width;
4581 ppr_options = ahd->msgin_buf[7];
4582 /*
4583 * According to the spec, a DT only
4584 * period factor with no DT option
4585 * set implies async.
4586 */
4587 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0
4588 && period <= 9)
4589 offset = 0;
4590 saved_ppr_options = ppr_options;
4591 saved_offset = offset;
4592
4593 /*
4594 * Transfer options are only available if we
4595 * are negotiating wide.
4596 */
4597 if (bus_width == 0)
4598 ppr_options &= MSG_EXT_PPR_QAS_REQ;
4599
4600 ahd_validate_width(ahd, tinfo, &bus_width,
4601 devinfo->role);
4602 ahd_devlimited_syncrate(ahd, tinfo, &period,
4603 &ppr_options, devinfo->role);
4604 ahd_validate_offset(ahd, tinfo, period, &offset,
4605 bus_width, devinfo->role);
4606
4607 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) {
4608 /*
4609 * If we are unable to do any of the
4610 * requested options (we went too low),
4611 * then we'll have to reject the message.
4612 */
4613 if (saved_width > bus_width
4614 || saved_offset != offset
4615 || saved_ppr_options != ppr_options) {
4616 reject = TRUE;
4617 period = 0;
4618 offset = 0;
4619 bus_width = 0;
4620 ppr_options = 0;
4621 }
4622 } else {
4623 if (devinfo->role != ROLE_TARGET)
4624 printf("(%s:%c:%d:%d): Target "
4625 "Initiated PPR\n",
4626 ahd_name(ahd), devinfo->channel,
4627 devinfo->target, devinfo->lun);
4628 else
4629 printf("(%s:%c:%d:%d): Initiator "
4630 "Initiated PPR\n",
4631 ahd_name(ahd), devinfo->channel,
4632 devinfo->target, devinfo->lun);
4633 ahd->msgout_index = 0;
4634 ahd->msgout_len = 0;
4635 ahd_construct_ppr(ahd, devinfo, period, offset,
4636 bus_width, ppr_options);
4637 ahd->msgout_index = 0;
4638 response = TRUE;
4639 }
4640 if (bootverbose) {
4641 printf("(%s:%c:%d:%d): Received PPR width %x, "
4642 "period %x, offset %x,options %x\n"
4643 "\tFiltered to width %x, period %x, "
4644 "offset %x, options %x\n",
4645 ahd_name(ahd), devinfo->channel,
4646 devinfo->target, devinfo->lun,
4647 saved_width, ahd->msgin_buf[3],
4648 saved_offset, saved_ppr_options,
4649 bus_width, period, offset, ppr_options);
4650 }
4651 ahd_set_width(ahd, devinfo, bus_width,
4652 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4653 /*paused*/TRUE);
4654 ahd_set_syncrate(ahd, devinfo, period,
4655 offset, ppr_options,
4656 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4657 /*paused*/TRUE);
4658
4659 done = MSGLOOP_MSGCOMPLETE;
4660 break;
4661 }
4662 default:
4663 /* Unknown extended message. Reject it. */
4664 reject = TRUE;
4665 break;
4666 }
4667 break;
4668 }
4669 #ifdef AHD_TARGET_MODE
4670 case MSG_BUS_DEV_RESET:
4671 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD,
4672 CAM_BDR_SENT,
4673 "Bus Device Reset Received",
4674 /*verbose_level*/0);
4675 ahd_restart(ahd);
4676 done = MSGLOOP_TERMINATED;
4677 break;
4678 case MSG_ABORT_TAG:
4679 case MSG_ABORT:
4680 case MSG_CLEAR_QUEUE:
4681 {
4682 int tag;
4683
4684 /* Target mode messages */
4685 if (devinfo->role != ROLE_TARGET) {
4686 reject = TRUE;
4687 break;
4688 }
4689 tag = SCB_LIST_NULL;
4690 if (ahd->msgin_buf[0] == MSG_ABORT_TAG)
4691 tag = ahd_inb(ahd, INITIATOR_TAG);
4692 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
4693 devinfo->lun, tag, ROLE_TARGET,
4694 CAM_REQ_ABORTED);
4695
4696 tstate = ahd->enabled_targets[devinfo->our_scsiid];
4697 if (tstate != NULL) {
4698 struct ahd_tmode_lstate* lstate;
4699
4700 lstate = tstate->enabled_luns[devinfo->lun];
4701 if (lstate != NULL) {
4702 ahd_queue_lstate_event(ahd, lstate,
4703 devinfo->our_scsiid,
4704 ahd->msgin_buf[0],
4705 /*arg*/tag);
4706 ahd_send_lstate_events(ahd, lstate);
4707 }
4708 }
4709 ahd_restart(ahd);
4710 done = MSGLOOP_TERMINATED;
4711 break;
4712 }
4713 #endif
4714 case MSG_QAS_REQUEST:
4715 #ifdef AHD_DEBUG
4716 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4717 printf("%s: QAS request. SCSISIGI == 0x%x\n",
4718 ahd_name(ahd), ahd_inb(ahd, SCSISIGI));
4719 #endif
4720 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE;
4721 /* FALLTHROUGH */
4722 case MSG_TERM_IO_PROC:
4723 default:
4724 reject = TRUE;
4725 break;
4726 }
4727
4728 if (reject) {
4729 /*
4730 * Setup to reject the message.
4731 */
4732 ahd->msgout_index = 0;
4733 ahd->msgout_len = 1;
4734 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT;
4735 done = MSGLOOP_MSGCOMPLETE;
4736 response = TRUE;
4737 }
4738
4739 if (done != MSGLOOP_IN_PROG && !response)
4740 /* Clear the outgoing message buffer */
4741 ahd->msgout_len = 0;
4742
4743 return (done);
4744 }
4745
4746 /*
4747 * Process a message reject message.
4748 */
4749 static int
4750 ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4751 {
4752 /*
4753 * What we care about here is if we had an
4754 * outstanding SDTR or WDTR message for this
4755 * target. If we did, this is a signal that
4756 * the target is refusing negotiation.
4757 */
4758 struct scb *scb;
4759 struct ahd_initiator_tinfo *tinfo;
4760 struct ahd_tmode_tstate *tstate;
4761 u_int scb_index;
4762 u_int last_msg;
4763 int response = 0;
4764
4765 scb_index = ahd_get_scbptr(ahd);
4766 scb = ahd_lookup_scb(ahd, scb_index);
4767 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel,
4768 devinfo->our_scsiid,
4769 devinfo->target, &tstate);
4770 /* Might be necessary */
4771 last_msg = ahd_inb(ahd, LAST_MSG);
4772
4773 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) {
4774 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE)
4775 && tinfo->goal.period <= AHD_SYNCRATE_PACED) {
4776 /*
4777 * Target may not like our SPI-4 PPR Options.
4778 * Attempt to negotiate 80MHz which will turn
4779 * off these options.
4780 */
4781 if (bootverbose) {
4782 printf("(%s:%c:%d:%d): PPR Rejected. "
4783 "Trying simple U160 PPR\n",
4784 ahd_name(ahd), devinfo->channel,
4785 devinfo->target, devinfo->lun);
4786 }
4787 tinfo->goal.period = AHD_SYNCRATE_DT;
4788 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ
4789 | MSG_EXT_PPR_QAS_REQ
4790 | MSG_EXT_PPR_DT_REQ;
4791 } else {
4792 /*
4793 * Target does not support the PPR message.
4794 * Attempt to negotiate SPI-2 style.
4795 */
4796 if (bootverbose) {
4797 printf("(%s:%c:%d:%d): PPR Rejected. "
4798 "Trying WDTR/SDTR\n",
4799 ahd_name(ahd), devinfo->channel,
4800 devinfo->target, devinfo->lun);
4801 }
4802 tinfo->goal.ppr_options = 0;
4803 tinfo->curr.transport_version = 2;
4804 tinfo->goal.transport_version = 2;
4805 }
4806 ahd->msgout_index = 0;
4807 ahd->msgout_len = 0;
4808 ahd_build_transfer_msg(ahd, devinfo);
4809 ahd->msgout_index = 0;
4810 response = 1;
4811 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) {
4812
4813 /* note 8bit xfers */
4814 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using "
4815 "8bit transfers\n", ahd_name(ahd),
4816 devinfo->channel, devinfo->target, devinfo->lun);
4817 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
4818 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4819 /*paused*/TRUE);
4820 /*
4821 * No need to clear the sync rate. If the target
4822 * did not accept the command, our syncrate is
4823 * unaffected. If the target started the negotiation,
4824 * but rejected our response, we already cleared the
4825 * sync rate before sending our WDTR.
4826 */
4827 if (tinfo->goal.offset != tinfo->curr.offset) {
4828
4829 /* Start the sync negotiation */
4830 ahd->msgout_index = 0;
4831 ahd->msgout_len = 0;
4832 ahd_build_transfer_msg(ahd, devinfo);
4833 ahd->msgout_index = 0;
4834 response = 1;
4835 }
4836 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) {
4837 /* note asynch xfers and clear flag */
4838 ahd_set_syncrate(ahd, devinfo, /*period*/0,
4839 /*offset*/0, /*ppr_options*/0,
4840 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4841 /*paused*/TRUE);
4842 printf("(%s:%c:%d:%d): refuses synchronous negotiation. "
4843 "Using asynchronous transfers\n",
4844 ahd_name(ahd), devinfo->channel,
4845 devinfo->target, devinfo->lun);
4846 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) {
4847 int tag_type;
4848 int mask;
4849
4850 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK);
4851
4852 if (tag_type == MSG_SIMPLE_TASK) {
4853 printf("(%s:%c:%d:%d): refuses tagged commands. "
4854 "Performing non-tagged I/O\n", ahd_name(ahd),
4855 devinfo->channel, devinfo->target, devinfo->lun);
4856 ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_NONE);
4857 mask = ~0x23;
4858 } else {
4859 printf("(%s:%c:%d:%d): refuses %s tagged commands. "
4860 "Performing simple queue tagged I/O only\n",
4861 ahd_name(ahd), devinfo->channel, devinfo->target,
4862 devinfo->lun, tag_type == MSG_ORDERED_TASK
4863 ? "ordered" : "head of queue");
4864 ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_BASIC);
4865 mask = ~0x03;
4866 }
4867
4868 /*
4869 * Resend the identify for this CCB as the target
4870 * may believe that the selection is invalid otherwise.
4871 */
4872 ahd_outb(ahd, SCB_CONTROL,
4873 ahd_inb_scbram(ahd, SCB_CONTROL) & mask);
4874 scb->hscb->control &= mask;
4875 ahd_set_transaction_tag(scb, /*enabled*/FALSE,
4876 /*type*/MSG_SIMPLE_TASK);
4877 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG);
4878 ahd_assert_atn(ahd);
4879 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun),
4880 SCB_GET_TAG(scb));
4881
4882 /*
4883 * Requeue all tagged commands for this target
4884 * currently in our posession so they can be
4885 * converted to untagged commands.
4886 */
4887 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
4888 SCB_GET_CHANNEL(ahd, scb),
4889 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL,
4890 ROLE_INITIATOR, CAM_REQUEUE_REQ,
4891 SEARCH_COMPLETE);
4892 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) {
4893 /*
4894 * Most likely the device believes that we had
4895 * previously negotiated packetized.
4896 */
4897 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
4898 | MSG_FLAG_IU_REQ_CHANGED;
4899
4900 ahd_force_renegotiation(ahd, devinfo);
4901 ahd->msgout_index = 0;
4902 ahd->msgout_len = 0;
4903 ahd_build_transfer_msg(ahd, devinfo);
4904 ahd->msgout_index = 0;
4905 response = 1;
4906 } else {
4907 /*
4908 * Otherwise, we ignore it.
4909 */
4910 printf("%s:%c:%d: Message reject for %x -- ignored\n",
4911 ahd_name(ahd), devinfo->channel, devinfo->target,
4912 last_msg);
4913 }
4914 return (response);
4915 }
4916
4917 /*
4918 * Process an ingnore wide residue message.
4919 */
4920 static void
4921 ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4922 {
4923 u_int scb_index;
4924 struct scb *scb;
4925
4926 scb_index = ahd_get_scbptr(ahd);
4927 scb = ahd_lookup_scb(ahd, scb_index);
4928 /*
4929 * XXX Actually check data direction in the sequencer?
4930 * Perhaps add datadir to some spare bits in the hscb?
4931 */
4932 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0
4933 || ahd_get_transfer_dir(scb) != CAM_DIR_IN) {
4934 /*
4935 * Ignore the message if we haven't
4936 * seen an appropriate data phase yet.
4937 */
4938 } else {
4939 /*
4940 * If the residual occurred on the last
4941 * transfer and the transfer request was
4942 * expected to end on an odd count, do
4943 * nothing. Otherwise, subtract a byte
4944 * and update the residual count accordingly.
4945 */
4946 uint32_t sgptr;
4947
4948 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR);
4949 if ((sgptr & SG_LIST_NULL) != 0
4950 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
4951 & SCB_XFERLEN_ODD) != 0) {
4952 /*
4953 * If the residual occurred on the last
4954 * transfer and the transfer request was
4955 * expected to end on an odd count, do
4956 * nothing.
4957 */
4958 } else {
4959 uint32_t data_cnt;
4960 uint64_t data_addr;
4961 uint32_t sglen;
4962
4963 /* Pull in the rest of the sgptr */
4964 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
4965 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT);
4966 if ((sgptr & SG_LIST_NULL) != 0) {
4967 /*
4968 * The residual data count is not updated
4969 * for the command run to completion case.
4970 * Explicitly zero the count.
4971 */
4972 data_cnt &= ~AHD_SG_LEN_MASK;
4973 }
4974 data_addr = ahd_inq(ahd, SHADDR);
4975 data_cnt += 1;
4976 data_addr -= 1;
4977 sgptr &= SG_PTR_MASK;
4978 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
4979 struct ahd_dma64_seg *sg;
4980
4981 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
4982
4983 /*
4984 * The residual sg ptr points to the next S/G
4985 * to load so we must go back one.
4986 */
4987 sg--;
4988 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
4989 if (sg != scb->sg_list
4990 && sglen < (data_cnt & AHD_SG_LEN_MASK)) {
4991
4992 sg--;
4993 sglen = ahd_le32toh(sg->len);
4994 /*
4995 * Preserve High Address and SG_LIST
4996 * bits while setting the count to 1.
4997 */
4998 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
4999 data_addr = ahd_le64toh(sg->addr)
5000 + (sglen & AHD_SG_LEN_MASK)
5001 - 1;
5002
5003 /*
5004 * Increment sg so it points to the
5005 * "next" sg.
5006 */
5007 sg++;
5008 sgptr = ahd_sg_virt_to_bus(ahd, scb,
5009 sg);
5010 }
5011 } else {
5012 struct ahd_dma_seg *sg;
5013
5014 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
5015
5016 /*
5017 * The residual sg ptr points to the next S/G
5018 * to load so we must go back one.
5019 */
5020 sg--;
5021 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
5022 if (sg != scb->sg_list
5023 && sglen < (data_cnt & AHD_SG_LEN_MASK)) {
5024
5025 sg--;
5026 sglen = ahd_le32toh(sg->len);
5027 /*
5028 * Preserve High Address and SG_LIST
5029 * bits while setting the count to 1.
5030 */
5031 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
5032 data_addr = ahd_le32toh(sg->addr)
5033 + (sglen & AHD_SG_LEN_MASK)
5034 - 1;
5035
5036 /*
5037 * Increment sg so it points to the
5038 * "next" sg.
5039 */
5040 sg++;
5041 sgptr = ahd_sg_virt_to_bus(ahd, scb,
5042 sg);
5043 }
5044 }
5045 /*
5046 * Toggle the "oddness" of the transfer length
5047 * to handle this mid-transfer ignore wide
5048 * residue. This ensures that the oddness is
5049 * correct for subsequent data transfers.
5050 */
5051 ahd_outb(ahd, SCB_TASK_ATTRIBUTE,
5052 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
5053 ^ SCB_XFERLEN_ODD);
5054
5055 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
5056 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt);
5057 /*
5058 * The FIFO's pointers will be updated if/when the
5059 * sequencer re-enters a data phase.
5060 */
5061 }
5062 }
5063 }
5064
5065
5066 /*
5067 * Reinitialize the data pointers for the active transfer
5068 * based on its current residual.
5069 */
5070 static void
5071 ahd_reinitialize_dataptrs(struct ahd_softc *ahd)
5072 {
5073 struct scb *scb;
5074 ahd_mode_state saved_modes;
5075 u_int scb_index;
5076 u_int wait;
5077 uint32_t sgptr;
5078 uint32_t resid;
5079 uint64_t dataptr;
5080
5081 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK,
5082 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK);
5083
5084 scb_index = ahd_get_scbptr(ahd);
5085 scb = ahd_lookup_scb(ahd, scb_index);
5086
5087 /*
5088 * Release and reacquire the FIFO so we
5089 * have a clean slate.
5090 */
5091 ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
5092 wait = 1000;
5093 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE))
5094 ahd_delay(100);
5095 if (wait == 0) {
5096 ahd_print_path(ahd, scb);
5097 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n");
5098 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
5099 }
5100 saved_modes = ahd_save_modes(ahd);
5101 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5102 ahd_outb(ahd, DFFSTAT,
5103 ahd_inb(ahd, DFFSTAT)
5104 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0));
5105
5106 /*
5107 * Determine initial values for data_addr and data_cnt
5108 * for resuming the data phase.
5109 */
5110 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
5111 sgptr &= SG_PTR_MASK;
5112
5113 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16)
5114 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8)
5115 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT);
5116
5117 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
5118 struct ahd_dma64_seg *sg;
5119
5120 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
5121
5122 /* The residual sg_ptr always points to the next sg */
5123 sg--;
5124
5125 dataptr = ahd_le64toh(sg->addr)
5126 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
5127 - resid;
5128 ahd_outl(ahd, HADDR + 4, dataptr >> 32);
5129 } else {
5130 struct ahd_dma_seg *sg;
5131
5132 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
5133
5134 /* The residual sg_ptr always points to the next sg */
5135 sg--;
5136
5137 dataptr = ahd_le32toh(sg->addr)
5138 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
5139 - resid;
5140 ahd_outb(ahd, HADDR + 4,
5141 (ahd_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24);
5142 }
5143 ahd_outl(ahd, HADDR, dataptr);
5144 ahd_outb(ahd, HCNT + 2, resid >> 16);
5145 ahd_outb(ahd, HCNT + 1, resid >> 8);
5146 ahd_outb(ahd, HCNT, resid);
5147 }
5148
5149 /*
5150 * Handle the effects of issuing a bus device reset message.
5151 */
5152 static void
5153 ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
5154 u_int lun, cam_status status, char *message,
5155 int verbose_level)
5156 {
5157 #ifdef AHD_TARGET_MODE
5158 struct ahd_tmode_tstate* tstate;
5159 #endif
5160 int found;
5161
5162 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
5163 lun, SCB_LIST_NULL, devinfo->role,
5164 status);
5165
5166 #ifdef AHD_TARGET_MODE
5167 /*
5168 * Send an immediate notify ccb to all target mord peripheral
5169 * drivers affected by this action.
5170 */
5171 tstate = ahd->enabled_targets[devinfo->our_scsiid];
5172 if (tstate != NULL) {
5173 u_int cur_lun;
5174 u_int max_lun;
5175
5176 if (lun != CAM_LUN_WILDCARD) {
5177 cur_lun = 0;
5178 max_lun = AHD_NUM_LUNS - 1;
5179 } else {
5180 cur_lun = lun;
5181 max_lun = lun;
5182 }
5183 for (;cur_lun <= max_lun; cur_lun++) {
5184 struct ahd_tmode_lstate* lstate;
5185
5186 lstate = tstate->enabled_luns[cur_lun];
5187 if (lstate == NULL)
5188 continue;
5189
5190 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid,
5191 MSG_BUS_DEV_RESET, /*arg*/0);
5192 ahd_send_lstate_events(ahd, lstate);
5193 }
5194 }
5195 #endif
5196
5197 /*
5198 * Go back to async/narrow transfers and renegotiate.
5199 */
5200 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
5201 AHD_TRANS_CUR, /*paused*/TRUE);
5202 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0,
5203 /*ppr_options*/0, AHD_TRANS_CUR,
5204 /*paused*/TRUE);
5205
5206 if (status != CAM_SEL_TIMEOUT)
5207 ahd_send_async(ahd, devinfo->channel, devinfo->target,
5208 CAM_LUN_WILDCARD, AC_SENT_BDR);
5209
5210 if (message != NULL && bootverbose)
5211 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd),
5212 message, devinfo->channel, devinfo->target, found);
5213 }
5214
5215 #ifdef AHD_TARGET_MODE
5216 static void
5217 ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
5218 struct scb *scb)
5219 {
5220
5221 /*
5222 * To facilitate adding multiple messages together,
5223 * each routine should increment the index and len
5224 * variables instead of setting them explicitly.
5225 */
5226 ahd->msgout_index = 0;
5227 ahd->msgout_len = 0;
5228
5229 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0)
5230 ahd_build_transfer_msg(ahd, devinfo);
5231 else
5232 panic("ahd_intr: AWAITING target message with no message");
5233
5234 ahd->msgout_index = 0;
5235 ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
5236 }
5237 #endif
5238 /**************************** Initialization **********************************/
5239 static u_int
5240 ahd_sglist_size(struct ahd_softc *ahd)
5241 {
5242 bus_size_t list_size;
5243
5244 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG;
5245 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
5246 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG;
5247 return (list_size);
5248 }
5249
5250 /*
5251 * Calculate the optimum S/G List allocation size. S/G elements used
5252 * for a given transaction must be physically contiguous. Assume the
5253 * OS will allocate full pages to us, so it doesn't make sense to request
5254 * less than a page.
5255 */
5256 static u_int
5257 ahd_sglist_allocsize(struct ahd_softc *ahd)
5258 {
5259 bus_size_t sg_list_increment;
5260 bus_size_t sg_list_size;
5261 bus_size_t max_list_size;
5262 bus_size_t best_list_size;
5263
5264 /* Start out with the minimum required for AHD_NSEG. */
5265 sg_list_increment = ahd_sglist_size(ahd);
5266 sg_list_size = sg_list_increment;
5267
5268 /* Get us as close as possible to a page in size. */
5269 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE)
5270 sg_list_size += sg_list_increment;
5271
5272 /*
5273 * Try to reduce the amount of wastage by allocating
5274 * multiple pages.
5275 */
5276 best_list_size = sg_list_size;
5277 max_list_size = roundup(sg_list_increment, PAGE_SIZE);
5278 if (max_list_size < 4 * PAGE_SIZE)
5279 max_list_size = 4 * PAGE_SIZE;
5280 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment))
5281 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment);
5282 while ((sg_list_size + sg_list_increment) <= max_list_size
5283 && (sg_list_size % PAGE_SIZE) != 0) {
5284 bus_size_t new_mod;
5285 bus_size_t best_mod;
5286
5287 sg_list_size += sg_list_increment;
5288 new_mod = sg_list_size % PAGE_SIZE;
5289 best_mod = best_list_size % PAGE_SIZE;
5290 if (new_mod > best_mod || new_mod == 0) {
5291 best_list_size = sg_list_size;
5292 }
5293 }
5294 return (best_list_size);
5295 }
5296
5297 /*
5298 * Allocate a controller structure for a new device
5299 * and perform initial initializion.
5300 */
5301 struct ahd_softc *
5302 ahd_alloc(void *platform_arg, char *name)
5303 {
5304 struct ahd_softc *ahd;
5305
5306 #ifndef __FreeBSD__
5307 ahd = malloc(sizeof(*ahd), M_DEVBUF, M_NOWAIT);
5308 if (!ahd) {
5309 printf("aic7xxx: cannot malloc softc!\n");
5310 free(name, M_DEVBUF);
5311 return NULL;
5312 }
5313 #else
5314 ahd = device_get_softc((device_t)platform_arg);
5315 #endif
5316 memset(ahd, 0, sizeof(*ahd));
5317 ahd->seep_config = malloc(sizeof(*ahd->seep_config),
5318 M_DEVBUF, M_NOWAIT);
5319 if (ahd->seep_config == NULL) {
5320 #ifndef __FreeBSD__
5321 free(ahd, M_DEVBUF);
5322 #endif
5323 free(name, M_DEVBUF);
5324 return (NULL);
5325 }
5326 LIST_INIT(&ahd->pending_scbs);
5327 /* We don't know our unit number until the OSM sets it */
5328 ahd->name = name;
5329 ahd->unit = -1;
5330 ahd->description = NULL;
5331 ahd->bus_description = NULL;
5332 ahd->channel = 'A';
5333 ahd->chip = AHD_NONE;
5334 ahd->features = AHD_FENONE;
5335 ahd->bugs = AHD_BUGNONE;
5336 ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A
5337 | AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A;
5338 ahd_timer_init(&ahd->reset_timer);
5339 ahd_timer_init(&ahd->stat_timer);
5340 ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT;
5341 ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT;
5342 ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT;
5343 ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT;
5344 ahd->int_coalescing_stop_threshold =
5345 AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT;
5346
5347 if (ahd_platform_alloc(ahd, platform_arg) != 0) {
5348 ahd_free(ahd);
5349 ahd = NULL;
5350 }
5351 #ifdef AHD_DEBUG
5352 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) {
5353 printf("%s: scb size = 0x%x, hscb size = 0x%x\n",
5354 ahd_name(ahd), (u_int)sizeof(struct scb),
5355 (u_int)sizeof(struct hardware_scb));
5356 }
5357 #endif
5358 return (ahd);
5359 }
5360
5361 int
5362 ahd_softc_init(struct ahd_softc *ahd)
5363 {
5364
5365 ahd->unpause = 0;
5366 ahd->pause = PAUSE;
5367 return (0);
5368 }
5369
5370 void
5371 ahd_set_unit(struct ahd_softc *ahd, int unit)
5372 {
5373 ahd->unit = unit;
5374 }
5375
5376 void
5377 ahd_set_name(struct ahd_softc *ahd, char *name)
5378 {
5379 if (ahd->name != NULL)
5380 free(ahd->name, M_DEVBUF);
5381 ahd->name = name;
5382 }
5383
5384 void
5385 ahd_free(struct ahd_softc *ahd)
5386 {
5387 int i;
5388
5389 switch (ahd->init_level) {
5390 default:
5391 case 5:
5392 ahd_shutdown(ahd);
5393 /* FALLTHROUGH */
5394 case 4:
5395 ahd_dmamap_unload(ahd, ahd->shared_data_dmat,
5396 ahd->shared_data_map.dmamap);
5397 /* FALLTHROUGH */
5398 case 3:
5399 ahd_dmamem_free(ahd, ahd->shared_data_dmat, ahd->qoutfifo,
5400 ahd->shared_data_map.dmamap);
5401 ahd_dmamap_destroy(ahd, ahd->shared_data_dmat,
5402 ahd->shared_data_map.dmamap);
5403 /* FALLTHROUGH */
5404 case 2:
5405 ahd_dma_tag_destroy(ahd, ahd->shared_data_dmat);
5406 case 1:
5407 #ifndef __linux__
5408 ahd_dma_tag_destroy(ahd, ahd->buffer_dmat);
5409 #endif
5410 break;
5411 case 0:
5412 break;
5413 }
5414
5415 #ifndef __linux__
5416 ahd_dma_tag_destroy(ahd, ahd->parent_dmat);
5417 #endif
5418 ahd_platform_free(ahd);
5419 ahd_fini_scbdata(ahd);
5420 for (i = 0; i < AHD_NUM_TARGETS; i++) {
5421 struct ahd_tmode_tstate *tstate;
5422
5423 tstate = ahd->enabled_targets[i];
5424 if (tstate != NULL) {
5425 #ifdef AHD_TARGET_MODE
5426 int j;
5427
5428 for (j = 0; j < AHD_NUM_LUNS; j++) {
5429 struct ahd_tmode_lstate *lstate;
5430
5431 lstate = tstate->enabled_luns[j];
5432 if (lstate != NULL) {
5433 xpt_free_path(lstate->path);
5434 free(lstate, M_DEVBUF);
5435 }
5436 }
5437 #endif
5438 free(tstate, M_DEVBUF);
5439 }
5440 }
5441 #ifdef AHD_TARGET_MODE
5442 if (ahd->black_hole != NULL) {
5443 xpt_free_path(ahd->black_hole->path);
5444 free(ahd->black_hole, M_DEVBUF);
5445 }
5446 #endif
5447 if (ahd->name != NULL)
5448 free(ahd->name, M_DEVBUF);
5449 if (ahd->seep_config != NULL)
5450 free(ahd->seep_config, M_DEVBUF);
5451 if (ahd->saved_stack != NULL)
5452 free(ahd->saved_stack, M_DEVBUF);
5453 #ifndef __FreeBSD__
5454 free(ahd, M_DEVBUF);
5455 #endif
5456 return;
5457 }
5458
5459 static void
5460 ahd_shutdown(void *arg)
5461 {
5462 struct ahd_softc *ahd;
5463
5464 ahd = (struct ahd_softc *)arg;
5465
5466 /*
5467 * Stop periodic timer callbacks.
5468 */
5469 ahd_timer_stop(&ahd->reset_timer);
5470 ahd_timer_stop(&ahd->stat_timer);
5471
5472 /* This will reset most registers to 0, but not all */
5473 ahd_reset(ahd, /*reinit*/FALSE);
5474 }
5475
5476 /*
5477 * Reset the controller and record some information about it
5478 * that is only available just after a reset. If "reinit" is
5479 * non-zero, this reset occured after initial configuration
5480 * and the caller requests that the chip be fully reinitialized
5481 * to a runable state. Chip interrupts are *not* enabled after
5482 * a reinitialization. The caller must enable interrupts via
5483 * ahd_intr_enable().
5484 */
5485 int
5486 ahd_reset(struct ahd_softc *ahd, int reinit)
5487 {
5488 u_int sxfrctl1;
5489 int wait;
5490 uint32_t cmd;
5491
5492 /*
5493 * Preserve the value of the SXFRCTL1 register for all channels.
5494 * It contains settings that affect termination and we don't want
5495 * to disturb the integrity of the bus.
5496 */
5497 ahd_pause(ahd);
5498 ahd_update_modes(ahd);
5499 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5500 sxfrctl1 = ahd_inb(ahd, SXFRCTL1);
5501
5502 cmd = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
5503 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
5504 uint32_t mod_cmd;
5505
5506 /*
5507 * A4 Razor #632
5508 * During the assertion of CHIPRST, the chip
5509 * does not disable its parity logic prior to
5510 * the start of the reset. This may cause a
5511 * parity error to be detected and thus a
5512 * spurious SERR or PERR assertion. Disble
5513 * PERR and SERR responses during the CHIPRST.
5514 */
5515 mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN);
5516 ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
5517 mod_cmd, /*bytes*/2);
5518 }
5519 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause);
5520
5521 /*
5522 * Ensure that the reset has finished. We delay 1000us
5523 * prior to reading the register to make sure the chip
5524 * has sufficiently completed its reset to handle register
5525 * accesses.
5526 */
5527 wait = 1000;
5528 do {
5529 ahd_delay(1000);
5530 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK));
5531
5532 if (wait == 0) {
5533 printf("%s: WARNING - Failed chip reset! "
5534 "Trying to initialize anyway.\n", ahd_name(ahd));
5535 }
5536 ahd_outb(ahd, HCNTRL, ahd->pause);
5537
5538 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
5539 /*
5540 * Clear any latched PCI error status and restore
5541 * previous SERR and PERR response enables.
5542 */
5543 ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
5544 0xFF, /*bytes*/1);
5545 ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
5546 cmd, /*bytes*/2);
5547 }
5548
5549 /*
5550 * Mode should be SCSI after a chip reset, but lets
5551 * set it just to be safe. We touch the MODE_PTR
5552 * register directly so as to bypass the lazy update
5553 * code in ahd_set_modes().
5554 */
5555 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5556 ahd_outb(ahd, MODE_PTR,
5557 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI));
5558
5559 /*
5560 * Restore SXFRCTL1.
5561 *
5562 * We must always initialize STPWEN to 1 before we
5563 * restore the saved values. STPWEN is initialized
5564 * to a tri-state condition which can only be cleared
5565 * by turning it on.
5566 */
5567 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN);
5568 ahd_outb(ahd, SXFRCTL1, sxfrctl1);
5569
5570 /* Determine chip configuration */
5571 ahd->features &= ~AHD_WIDE;
5572 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0)
5573 ahd->features |= AHD_WIDE;
5574
5575 /*
5576 * If a recovery action has forced a chip reset,
5577 * re-initialize the chip to our liking.
5578 */
5579 if (reinit != 0)
5580 ahd_chip_init(ahd);
5581
5582 return (0);
5583 }
5584
5585 /*
5586 * Determine the number of SCBs available on the controller
5587 */
5588 static int
5589 ahd_probe_scbs(struct ahd_softc *ahd) {
5590 int i;
5591
5592 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
5593 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
5594 for (i = 0; i < AHD_SCB_MAX; i++) {
5595 int j;
5596
5597 ahd_set_scbptr(ahd, i);
5598 ahd_outw(ahd, SCB_BASE, i);
5599 for (j = 2; j < 64; j++)
5600 ahd_outb(ahd, SCB_BASE+j, 0);
5601 /* Start out life as unallocated (needing an abort) */
5602 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE);
5603 if (ahd_inw_scbram(ahd, SCB_BASE) != i)
5604 break;
5605 ahd_set_scbptr(ahd, 0);
5606 if (ahd_inw_scbram(ahd, SCB_BASE) != 0)
5607 break;
5608 }
5609 return (i);
5610 }
5611
5612 static void
5613 ahd_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
5614 {
5615 dma_addr_t *baddr;
5616
5617 baddr = (dma_addr_t *)arg;
5618 *baddr = segs->ds_addr;
5619 }
5620
5621 static void
5622 ahd_initialize_hscbs(struct ahd_softc *ahd)
5623 {
5624 int i;
5625
5626 for (i = 0; i < ahd->scb_data.maxhscbs; i++) {
5627 ahd_set_scbptr(ahd, i);
5628
5629 /* Clear the control byte. */
5630 ahd_outb(ahd, SCB_CONTROL, 0);
5631
5632 /* Set the next pointer */
5633 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL);
5634 }
5635 }
5636
5637 static int
5638 ahd_init_scbdata(struct ahd_softc *ahd)
5639 {
5640 struct scb_data *scb_data;
5641 int i;
5642
5643 scb_data = &ahd->scb_data;
5644 TAILQ_INIT(&scb_data->free_scbs);
5645 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++)
5646 LIST_INIT(&scb_data->free_scb_lists[i]);
5647 LIST_INIT(&scb_data->any_dev_free_scb_list);
5648 SLIST_INIT(&scb_data->hscb_maps);
5649 SLIST_INIT(&scb_data->sg_maps);
5650 SLIST_INIT(&scb_data->sense_maps);
5651
5652 /* Determine the number of hardware SCBs and initialize them */
5653 scb_data->maxhscbs = ahd_probe_scbs(ahd);
5654 if (scb_data->maxhscbs == 0) {
5655 printf("%s: No SCB space found\n", ahd_name(ahd));
5656 return (ENXIO);
5657 }
5658
5659 ahd_initialize_hscbs(ahd);
5660
5661 /*
5662 * Create our DMA tags. These tags define the kinds of device
5663 * accessible memory allocations and memory mappings we will
5664 * need to perform during normal operation.
5665 *
5666 * Unless we need to further restrict the allocation, we rely
5667 * on the restrictions of the parent dmat, hence the common
5668 * use of MAXADDR and MAXSIZE.
5669 */
5670
5671 /* DMA tag for our hardware scb structures */
5672 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
5673 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
5674 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
5675 /*highaddr*/BUS_SPACE_MAXADDR,
5676 /*filter*/NULL, /*filterarg*/NULL,
5677 PAGE_SIZE, /*nsegments*/1,
5678 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
5679 /*flags*/0, &scb_data->hscb_dmat) != 0) {
5680 goto error_exit;
5681 }
5682
5683 scb_data->init_level++;
5684
5685 /* DMA tag for our S/G structures. */
5686 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/8,
5687 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
5688 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
5689 /*highaddr*/BUS_SPACE_MAXADDR,
5690 /*filter*/NULL, /*filterarg*/NULL,
5691 ahd_sglist_allocsize(ahd), /*nsegments*/1,
5692 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
5693 /*flags*/0, &scb_data->sg_dmat) != 0) {
5694 goto error_exit;
5695 }
5696 #ifdef AHD_DEBUG
5697 if ((ahd_debug & AHD_SHOW_MEMORY) != 0)
5698 printf("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd),
5699 ahd_sglist_allocsize(ahd));
5700 #endif
5701
5702 scb_data->init_level++;
5703
5704 /* DMA tag for our sense buffers. We allocate in page sized chunks */
5705 if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
5706 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
5707 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
5708 /*highaddr*/BUS_SPACE_MAXADDR,
5709 /*filter*/NULL, /*filterarg*/NULL,
5710 PAGE_SIZE, /*nsegments*/1,
5711 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
5712 /*flags*/0, &scb_data->sense_dmat) != 0) {
5713 goto error_exit;
5714 }
5715
5716 scb_data->init_level++;
5717
5718 /* Perform initial CCB allocation */
5719 ahd_alloc_scbs(ahd);
5720
5721 if (scb_data->numscbs == 0) {
5722 printf("%s: ahd_init_scbdata - "
5723 "Unable to allocate initial scbs\n",
5724 ahd_name(ahd));
5725 goto error_exit;
5726 }
5727
5728 /*
5729 * Note that we were successfull
5730 */
5731 return (0);
5732
5733 error_exit:
5734
5735 return (ENOMEM);
5736 }
5737
5738 static struct scb *
5739 ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag)
5740 {
5741 struct scb *scb;
5742
5743 /*
5744 * Look on the pending list.
5745 */
5746 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
5747 if (SCB_GET_TAG(scb) == tag)
5748 return (scb);
5749 }
5750
5751 /*
5752 * Then on all of the collision free lists.
5753 */
5754 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
5755 struct scb *list_scb;
5756
5757 list_scb = scb;
5758 do {
5759 if (SCB_GET_TAG(list_scb) == tag)
5760 return (list_scb);
5761 list_scb = LIST_NEXT(list_scb, collision_links);
5762 } while (list_scb);
5763 }
5764
5765 /*
5766 * And finally on the generic free list.
5767 */
5768 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) {
5769 if (SCB_GET_TAG(scb) == tag)
5770 return (scb);
5771 }
5772
5773 return (NULL);
5774 }
5775
5776 static void
5777 ahd_fini_scbdata(struct ahd_softc *ahd)
5778 {
5779 struct scb_data *scb_data;
5780
5781 scb_data = &ahd->scb_data;
5782 if (scb_data == NULL)
5783 return;
5784
5785 switch (scb_data->init_level) {
5786 default:
5787 case 7:
5788 {
5789 struct map_node *sns_map;
5790
5791 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) {
5792 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links);
5793 ahd_dmamap_unload(ahd, scb_data->sense_dmat,
5794 sns_map->dmamap);
5795 ahd_dmamem_free(ahd, scb_data->sense_dmat,
5796 sns_map->vaddr, sns_map->dmamap);
5797 free(sns_map, M_DEVBUF);
5798 }
5799 ahd_dma_tag_destroy(ahd, scb_data->sense_dmat);
5800 /* FALLTHROUGH */
5801 }
5802 case 6:
5803 {
5804 struct map_node *sg_map;
5805
5806 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) {
5807 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links);
5808 ahd_dmamap_unload(ahd, scb_data->sg_dmat,
5809 sg_map->dmamap);
5810 ahd_dmamem_free(ahd, scb_data->sg_dmat,
5811 sg_map->vaddr, sg_map->dmamap);
5812 free(sg_map, M_DEVBUF);
5813 }
5814 ahd_dma_tag_destroy(ahd, scb_data->sg_dmat);
5815 /* FALLTHROUGH */
5816 }
5817 case 5:
5818 {
5819 struct map_node *hscb_map;
5820
5821 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) {
5822 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links);
5823 ahd_dmamap_unload(ahd, scb_data->hscb_dmat,
5824 hscb_map->dmamap);
5825 ahd_dmamem_free(ahd, scb_data->hscb_dmat,
5826 hscb_map->vaddr, hscb_map->dmamap);
5827 free(hscb_map, M_DEVBUF);
5828 }
5829 ahd_dma_tag_destroy(ahd, scb_data->hscb_dmat);
5830 /* FALLTHROUGH */
5831 }
5832 case 4:
5833 case 3:
5834 case 2:
5835 case 1:
5836 case 0:
5837 break;
5838 }
5839 }
5840
5841 /*
5842 * DSP filter Bypass must be enabled until the first selection
5843 * after a change in bus mode (Razor #491 and #493).
5844 */
5845 static void
5846 ahd_setup_iocell_workaround(struct ahd_softc *ahd)
5847 {
5848 ahd_mode_state saved_modes;
5849
5850 saved_modes = ahd_save_modes(ahd);
5851 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
5852 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL)
5853 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS);
5854 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI));
5855 #ifdef AHD_DEBUG
5856 if ((ahd_debug & AHD_SHOW_MISC) != 0)
5857 printf("%s: Setting up iocell workaround\n", ahd_name(ahd));
5858 #endif
5859 ahd_restore_modes(ahd, saved_modes);
5860 ahd->flags &= ~AHD_HAD_FIRST_SEL;
5861 }
5862
5863 static void
5864 ahd_iocell_first_selection(struct ahd_softc *ahd)
5865 {
5866 ahd_mode_state saved_modes;
5867 u_int sblkctl;
5868
5869 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0)
5870 return;
5871 saved_modes = ahd_save_modes(ahd);
5872 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5873 sblkctl = ahd_inb(ahd, SBLKCTL);
5874 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
5875 #ifdef AHD_DEBUG
5876 if ((ahd_debug & AHD_SHOW_MISC) != 0)
5877 printf("%s: iocell first selection\n", ahd_name(ahd));
5878 #endif
5879 if ((sblkctl & ENAB40) != 0) {
5880 ahd_outb(ahd, DSPDATACTL,
5881 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB);
5882 #ifdef AHD_DEBUG
5883 if ((ahd_debug & AHD_SHOW_MISC) != 0)
5884 printf("%s: BYPASS now disabled\n", ahd_name(ahd));
5885 #endif
5886 }
5887 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI));
5888 ahd_outb(ahd, CLRINT, CLRSCSIINT);
5889 ahd_restore_modes(ahd, saved_modes);
5890 ahd->flags |= AHD_HAD_FIRST_SEL;
5891 }
5892
5893 /*************************** SCB Management ***********************************/
5894 static void
5895 ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx)
5896 {
5897 struct scb_list *free_list;
5898 struct scb_tailq *free_tailq;
5899 struct scb *first_scb;
5900
5901 scb->flags |= SCB_ON_COL_LIST;
5902 AHD_SET_SCB_COL_IDX(scb, col_idx);
5903 free_list = &ahd->scb_data.free_scb_lists[col_idx];
5904 free_tailq = &ahd->scb_data.free_scbs;
5905 first_scb = LIST_FIRST(free_list);
5906 if (first_scb != NULL) {
5907 LIST_INSERT_AFTER(first_scb, scb, collision_links);
5908 } else {
5909 LIST_INSERT_HEAD(free_list, scb, collision_links);
5910 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe);
5911 }
5912 }
5913
5914 static void
5915 ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb)
5916 {
5917 struct scb_list *free_list;
5918 struct scb_tailq *free_tailq;
5919 struct scb *first_scb;
5920 u_int col_idx;
5921
5922 scb->flags &= ~SCB_ON_COL_LIST;
5923 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb);
5924 free_list = &ahd->scb_data.free_scb_lists[col_idx];
5925 free_tailq = &ahd->scb_data.free_scbs;
5926 first_scb = LIST_FIRST(free_list);
5927 if (first_scb == scb) {
5928 struct scb *next_scb;
5929
5930 /*
5931 * Maintain order in the collision free
5932 * lists for fairness if this device has
5933 * other colliding tags active.
5934 */
5935 next_scb = LIST_NEXT(scb, collision_links);
5936 if (next_scb != NULL) {
5937 TAILQ_INSERT_AFTER(free_tailq, scb,
5938 next_scb, links.tqe);
5939 }
5940 TAILQ_REMOVE(free_tailq, scb, links.tqe);
5941 }
5942 LIST_REMOVE(scb, collision_links);
5943 }
5944
5945 /*
5946 * Get a free scb. If there are none, see if we can allocate a new SCB.
5947 */
5948 struct scb *
5949 ahd_get_scb(struct ahd_softc *ahd, u_int col_idx)
5950 {
5951 struct scb *scb;
5952 int tries;
5953
5954 tries = 0;
5955 look_again:
5956 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
5957 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) {
5958 ahd_rem_col_list(ahd, scb);
5959 goto found;
5960 }
5961 }
5962 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) {
5963
5964 if (tries++ != 0)
5965 return (NULL);
5966 ahd_alloc_scbs(ahd);
5967 goto look_again;
5968 }
5969 LIST_REMOVE(scb, links.le);
5970 if (col_idx != AHD_NEVER_COL_IDX
5971 && (scb->col_scb != NULL)
5972 && (scb->col_scb->flags & SCB_ACTIVE) == 0) {
5973 LIST_REMOVE(scb->col_scb, links.le);
5974 ahd_add_col_list(ahd, scb->col_scb, col_idx);
5975 }
5976 found:
5977 scb->flags |= SCB_ACTIVE;
5978 return (scb);
5979 }
5980
5981 /*
5982 * Return an SCB resource to the free list.
5983 */
5984 void
5985 ahd_free_scb(struct ahd_softc *ahd, struct scb *scb)
5986 {
5987
5988 /* Clean up for the next user */
5989 scb->flags = SCB_FLAG_NONE;
5990 scb->hscb->control = 0;
5991 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL;
5992
5993 if (scb->col_scb == NULL) {
5994
5995 /*
5996 * No collision possible. Just free normally.
5997 */
5998 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
5999 scb, links.le);
6000 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) {
6001
6002 /*
6003 * The SCB we might have collided with is on
6004 * a free collision list. Put both SCBs on
6005 * the generic list.
6006 */
6007 ahd_rem_col_list(ahd, scb->col_scb);
6008 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
6009 scb, links.le);
6010 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
6011 scb->col_scb, links.le);
6012 } else if ((scb->col_scb->flags
6013 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE
6014 && (scb->col_scb->hscb->control & TAG_ENB) != 0) {
6015
6016 /*
6017 * The SCB we might collide with on the next allocation
6018 * is still active in a non-packetized, tagged, context.
6019 * Put us on the SCB collision list.
6020 */
6021 ahd_add_col_list(ahd, scb,
6022 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb));
6023 } else {
6024 /*
6025 * The SCB we might collide with on the next allocation
6026 * is either active in a packetized context, or free.
6027 * Since we can't collide, put this SCB on the generic
6028 * free list.
6029 */
6030 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
6031 scb, links.le);
6032 }
6033
6034 ahd_platform_scb_free(ahd, scb);
6035 }
6036
6037 static void
6038 ahd_alloc_scbs(struct ahd_softc *ahd)
6039 {
6040 struct scb_data *scb_data;
6041 struct scb *next_scb;
6042 struct hardware_scb *hscb;
6043 struct map_node *hscb_map;
6044 struct map_node *sg_map;
6045 struct map_node *sense_map;
6046 uint8_t *segs;
6047 uint8_t *sense_data;
6048 dma_addr_t hscb_busaddr;
6049 dma_addr_t sg_busaddr;
6050 dma_addr_t sense_busaddr;
6051 int newcount;
6052 int i;
6053
6054 scb_data = &ahd->scb_data;
6055 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC)
6056 /* Can't allocate any more */
6057 return;
6058
6059 if (scb_data->scbs_left != 0) {
6060 int offset;
6061
6062 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left;
6063 hscb_map = SLIST_FIRST(&scb_data->hscb_maps);
6064 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset];
6065 hscb_busaddr = hscb_map->physaddr + (offset * sizeof(*hscb));
6066 } else {
6067 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_NOWAIT);
6068
6069 if (hscb_map == NULL)
6070 return;
6071
6072 /* Allocate the next batch of hardware SCBs */
6073 if (ahd_dmamem_alloc(ahd, scb_data->hscb_dmat,
6074 (void **)&hscb_map->vaddr,
6075 BUS_DMA_NOWAIT, &hscb_map->dmamap) != 0) {
6076 free(hscb_map, M_DEVBUF);
6077 return;
6078 }
6079
6080 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links);
6081
6082 ahd_dmamap_load(ahd, scb_data->hscb_dmat, hscb_map->dmamap,
6083 hscb_map->vaddr, PAGE_SIZE, ahd_dmamap_cb,
6084 &hscb_map->physaddr, /*flags*/0);
6085
6086 hscb = (struct hardware_scb *)hscb_map->vaddr;
6087 hscb_busaddr = hscb_map->physaddr;
6088 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb);
6089 }
6090
6091 if (scb_data->sgs_left != 0) {
6092 int offset;
6093
6094 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd))
6095 - scb_data->sgs_left) * ahd_sglist_size(ahd);
6096 sg_map = SLIST_FIRST(&scb_data->sg_maps);
6097 segs = sg_map->vaddr + offset;
6098 sg_busaddr = sg_map->physaddr + offset;
6099 } else {
6100 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT);
6101
6102 if (sg_map == NULL)
6103 return;
6104
6105 /* Allocate the next batch of S/G lists */
6106 if (ahd_dmamem_alloc(ahd, scb_data->sg_dmat,
6107 (void **)&sg_map->vaddr,
6108 BUS_DMA_NOWAIT, &sg_map->dmamap) != 0) {
6109 free(sg_map, M_DEVBUF);
6110 return;
6111 }
6112
6113 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links);
6114
6115 ahd_dmamap_load(ahd, scb_data->sg_dmat, sg_map->dmamap,
6116 sg_map->vaddr, ahd_sglist_allocsize(ahd),
6117 ahd_dmamap_cb, &sg_map->physaddr, /*flags*/0);
6118
6119 segs = sg_map->vaddr;
6120 sg_busaddr = sg_map->physaddr;
6121 scb_data->sgs_left =
6122 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd);
6123 #ifdef AHD_DEBUG
6124 if (ahd_debug & AHD_SHOW_MEMORY)
6125 printf("Mapped SG data\n");