Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /* orinoco_nortel.c
  2  *
  3  * Driver for Prism II devices which would usually be driven by orinoco_cs,
  4  * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in
  5  * Nortel emobility, Symbol LA-4113 and Symbol LA-4123.
  6  *
  7  * Copyright (C) 2002 Tobias Hoffmann
  8  *           (C) 2003 Christoph Jungegger <disdos@traum404.de>
  9  *
 10  * Some of this code is borrowed from orinoco_plx.c
 11  *      Copyright (C) 2001 Daniel Barlow
 12  * Some of this code is borrowed from orinoco_pci.c 
 13  *  Copyright (C) 2001 Jean Tourrilhes
 14  * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
 15  * has been copied from it. linux-wlan-ng-0.1.10 is originally :
 16  *      Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
 17  * 
 18  * The contents of this file are subject to the Mozilla Public License
 19  * Version 1.1 (the "License"); you may not use this file except in
 20  * compliance with the License. You may obtain a copy of the License
 21  * at http://www.mozilla.org/MPL/
 22  *
 23  * Software distributed under the License is distributed on an "AS IS"
 24  * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
 25  * the License for the specific language governing rights and
 26  * limitations under the License.
 27  *
 28  * Alternatively, the contents of this file may be used under the
 29  * terms of the GNU General Public License version 2 (the "GPL"), in
 30  * which case the provisions of the GPL are applicable instead of the
 31  * above.  If you wish to allow the use of your version of this file
 32  * only under the terms of the GPL and not to allow others to use your
 33  * version of this file under the MPL, indicate your decision by
 34  * deleting the provisions above and replace them with the notice and
 35  * other provisions required by the GPL.  If you do not delete the
 36  * provisions above, a recipient may use your version of this file
 37  * under either the MPL or the GPL.
 38  */
 39 
 40 #define DRIVER_NAME "orinoco_nortel"
 41 #define PFX DRIVER_NAME ": "
 42 
 43 #include <linux/module.h>
 44 #include <linux/kernel.h>
 45 #include <linux/init.h>
 46 #include <linux/delay.h>
 47 #include <linux/pci.h>
 48 #include <pcmcia/cisreg.h>
 49 
 50 #include "orinoco.h"
 51 #include "orinoco_pci.h"
 52 
 53 #define COR_OFFSET    (0xe0)    /* COR attribute offset of Prism2 PC card */
 54 #define COR_VALUE     (COR_LEVEL_REQ | COR_FUNC_ENA)    /* Enable PC card with interrupt in level trigger */
 55 
 56 
 57 /*
 58  * Do a soft reset of the card using the Configuration Option Register
 59  * We need this to get going...
 60  * This is the part of the code that is strongly inspired from wlan-ng
 61  *
 62  * Note bis : Don't try to access HERMES_CMD during the reset phase.
 63  * It just won't work !
 64  */
 65 static int orinoco_nortel_cor_reset(struct orinoco_private *priv)
 66 {
 67         struct orinoco_pci_card *card = priv->card;
 68 
 69         /* Assert the reset until the card notices */
 70         iowrite16(8, card->bridge_io + 2);
 71         ioread16(card->attr_io + COR_OFFSET);
 72         iowrite16(0x80, card->attr_io + COR_OFFSET);
 73         mdelay(1);
 74 
 75         /* Give time for the card to recover from this hard effort */
 76         iowrite16(0, card->attr_io + COR_OFFSET);
 77         iowrite16(0, card->attr_io + COR_OFFSET);
 78         mdelay(1);
 79 
 80         /* Set COR as usual */
 81         iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
 82         iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
 83         mdelay(1);
 84 
 85         iowrite16(0x228, card->bridge_io + 2);
 86 
 87         return 0;
 88 }
 89 
 90 static int orinoco_nortel_hw_init(struct orinoco_pci_card *card)
 91 {
 92         int i;
 93         u32 reg;
 94 
 95         /* Setup bridge */
 96         if (ioread16(card->bridge_io) & 1) {
 97                 printk(KERN_ERR PFX "brg1 answer1 wrong\n");
 98                 return -EBUSY;
 99         }
100         iowrite16(0x118, card->bridge_io + 2);
101         iowrite16(0x108, card->bridge_io + 2);
102         mdelay(30);
103         iowrite16(0x8, card->bridge_io + 2);
104         for (i = 0; i < 30; i++) {
105                 mdelay(30);
106                 if (ioread16(card->bridge_io) & 0x10) {
107                         break;
108                 }
109         }
110         if (i == 30) {
111                 printk(KERN_ERR PFX "brg1 timed out\n");
112                 return -EBUSY;
113         }
114         if (ioread16(card->attr_io + COR_OFFSET) & 1) {
115                 printk(KERN_ERR PFX "brg2 answer1 wrong\n");
116                 return -EBUSY;
117         }
118         if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) {
119                 printk(KERN_ERR PFX "brg2 answer2 wrong\n");
120                 return -EBUSY;
121         }
122         if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) {
123                 printk(KERN_ERR PFX "brg2 answer3 wrong\n");
124                 return -EBUSY;
125         }
126 
127         /* Set the PCMCIA COR register */
128         iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
129         mdelay(1);
130         reg = ioread16(card->attr_io + COR_OFFSET);
131         if (reg != COR_VALUE) {
132                 printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
133                        reg);
134                 return -EBUSY;
135         }
136 
137         /* Set LEDs */
138         iowrite16(1, card->bridge_io + 10);
139         return 0;
140 }
141 
142 static int orinoco_nortel_init_one(struct pci_dev *pdev,
143                                    const struct pci_device_id *ent)
144 {
145         int err;
146         struct orinoco_private *priv;
147         struct orinoco_pci_card *card;
148         struct net_device *dev;
149         void __iomem *hermes_io, *bridge_io, *attr_io;
150 
151         err = pci_enable_device(pdev);
152         if (err) {
153                 printk(KERN_ERR PFX "Cannot enable PCI device\n");
154                 return err;
155         }
156 
157         err = pci_request_regions(pdev, DRIVER_NAME);
158         if (err) {
159                 printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
160                 goto fail_resources;
161         }
162 
163         bridge_io = pci_iomap(pdev, 0, 0);
164         if (!bridge_io) {
165                 printk(KERN_ERR PFX "Cannot map bridge registers\n");
166                 err = -EIO;
167                 goto fail_map_bridge;
168         }
169 
170         attr_io = pci_iomap(pdev, 1, 0);
171         if (!attr_io) {
172                 printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
173                 err = -EIO;
174                 goto fail_map_attr;
175         }
176 
177         hermes_io = pci_iomap(pdev, 2, 0);
178         if (!hermes_io) {
179                 printk(KERN_ERR PFX "Cannot map chipset registers\n");
180                 err = -EIO;
181                 goto fail_map_hermes;
182         }
183 
184         /* Allocate network device */
185         dev = alloc_orinocodev(sizeof(*card), orinoco_nortel_cor_reset);
186         if (!dev) {
187                 printk(KERN_ERR PFX "Cannot allocate network device\n");
188                 err = -ENOMEM;
189                 goto fail_alloc;
190         }
191 
192         priv = netdev_priv(dev);
193         card = priv->card;
194         card->bridge_io = bridge_io;
195         card->attr_io = attr_io;
196         SET_NETDEV_DEV(dev, &pdev->dev);
197 
198         hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
199 
200         err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
201                           dev->name, dev);
202         if (err) {
203                 printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
204                 err = -EBUSY;
205                 goto fail_irq;
206         }
207 
208         err = orinoco_nortel_hw_init(card);
209         if (err) {
210                 printk(KERN_ERR PFX "Hardware initialization failed\n");
211                 goto fail;
212         }
213 
214         err = orinoco_nortel_cor_reset(priv);
215         if (err) {
216                 printk(KERN_ERR PFX "Initial reset failed\n");
217                 goto fail;
218         }
219 
220         err = register_netdev(dev);
221         if (err) {
222                 printk(KERN_ERR PFX "Cannot register network device\n");
223                 goto fail;
224         }
225 
226         pci_set_drvdata(pdev, dev);
227         printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
228                pci_name(pdev));
229 
230         return 0;
231 
232  fail:
233         free_irq(pdev->irq, dev);
234 
235  fail_irq:
236         pci_set_drvdata(pdev, NULL);
237         free_orinocodev(dev);
238 
239  fail_alloc:
240         pci_iounmap(pdev, hermes_io);
241 
242  fail_map_hermes:
243         pci_iounmap(pdev, attr_io);
244 
245  fail_map_attr:
246         pci_iounmap(pdev, bridge_io);
247 
248  fail_map_bridge:
249         pci_release_regions(pdev);
250 
251  fail_resources:
252         pci_disable_device(pdev);
253 
254         return err;
255 }
256 
257 static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev)
258 {
259         struct net_device *dev = pci_get_drvdata(pdev);
260         struct orinoco_private *priv = netdev_priv(dev);
261         struct orinoco_pci_card *card = priv->card;
262 
263         /* Clear LEDs */
264         iowrite16(0, card->bridge_io + 10);
265 
266         unregister_netdev(dev);
267         free_irq(pdev->irq, dev);
268         pci_set_drvdata(pdev, NULL);
269         free_orinocodev(dev);
270         pci_iounmap(pdev, priv->hw.iobase);
271         pci_iounmap(pdev, card->attr_io);
272         pci_iounmap(pdev, card->bridge_io);
273         pci_release_regions(pdev);
274         pci_disable_device(pdev);
275 }
276 
277 static struct pci_device_id orinoco_nortel_id_table[] = {
278         /* Nortel emobility PCI */
279         {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
280         /* Symbol LA-4123 PCI */
281         {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,},
282         {0,},
283 };
284 
285 MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table);
286 
287 static struct pci_driver orinoco_nortel_driver = {
288         .name           = DRIVER_NAME,
289         .id_table       = orinoco_nortel_id_table,
290         .probe          = orinoco_nortel_init_one,
291         .remove         = __devexit_p(orinoco_nortel_remove_one),
292         .suspend        = orinoco_pci_suspend,
293         .resume         = orinoco_pci_resume,
294 };
295 
296 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
297         " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
298 MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
299 MODULE_DESCRIPTION
300     ("Driver for wireless LAN cards using the Nortel PCI bridge");
301 MODULE_LICENSE("Dual MPL/GPL");
302 
303 static int __init orinoco_nortel_init(void)
304 {
305         printk(KERN_DEBUG "%s\n", version);
306         return pci_register_driver(&orinoco_nortel_driver);
307 }
308 
309 static void __exit orinoco_nortel_exit(void)
310 {
311         pci_unregister_driver(&orinoco_nortel_driver);
312 }
313 
314 module_init(orinoco_nortel_init);
315 module_exit(orinoco_nortel_exit);
316 
317 /*
318  * Local variables:
319  *  c-indent-level: 8
320  *  c-basic-offset: 8
321  *  tab-width: 8
322  * End:
323  */
324 
  This page was automatically generated by the LXR engine.