1 /**
2 * This file contains definitions of WLAN commands.
3 */
4
5 #ifndef _LBS_HOST_H_
6 #define _LBS_HOST_H_
7
8 /** PUBLIC DEFINITIONS */
9 #define DEFAULT_AD_HOC_CHANNEL 6
10 #define DEFAULT_AD_HOC_CHANNEL_A 36
11
12 #define CMD_OPTION_WAITFORRSP 0x0002
13
14 /** Host command IDs */
15
16 /* Return command are almost always the same as the host command, but with
17 * bit 15 set high. There are a few exceptions, though...
18 */
19 #define CMD_RET(cmd) (0x8000 | cmd)
20
21 /* Return command convention exceptions: */
22 #define CMD_RET_802_11_ASSOCIATE 0x8012
23
24 /* Command codes */
25 #define CMD_GET_HW_SPEC 0x0003
26 #define CMD_EEPROM_UPDATE 0x0004
27 #define CMD_802_11_RESET 0x0005
28 #define CMD_802_11_SCAN 0x0006
29 #define CMD_802_11_GET_LOG 0x000b
30 #define CMD_MAC_MULTICAST_ADR 0x0010
31 #define CMD_802_11_AUTHENTICATE 0x0011
32 #define CMD_802_11_EEPROM_ACCESS 0x0059
33 #define CMD_802_11_ASSOCIATE 0x0050
34 #define CMD_802_11_SET_WEP 0x0013
35 #define CMD_802_11_GET_STAT 0x0014
36 #define CMD_802_3_GET_STAT 0x0015
37 #define CMD_802_11_SNMP_MIB 0x0016
38 #define CMD_MAC_REG_MAP 0x0017
39 #define CMD_BBP_REG_MAP 0x0018
40 #define CMD_MAC_REG_ACCESS 0x0019
41 #define CMD_BBP_REG_ACCESS 0x001a
42 #define CMD_RF_REG_ACCESS 0x001b
43 #define CMD_802_11_RADIO_CONTROL 0x001c
44 #define CMD_802_11_RF_CHANNEL 0x001d
45 #define CMD_802_11_RF_TX_POWER 0x001e
46 #define CMD_802_11_RSSI 0x001f
47 #define CMD_802_11_RF_ANTENNA 0x0020
48 #define CMD_802_11_PS_MODE 0x0021
49 #define CMD_802_11_DATA_RATE 0x0022
50 #define CMD_RF_REG_MAP 0x0023
51 #define CMD_802_11_DEAUTHENTICATE 0x0024
52 #define CMD_802_11_REASSOCIATE 0x0025
53 #define CMD_MAC_CONTROL 0x0028
54 #define CMD_802_11_AD_HOC_START 0x002b
55 #define CMD_802_11_AD_HOC_JOIN 0x002c
56 #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
57 #define CMD_802_11_ENABLE_RSN 0x002f
58 #define CMD_802_11_SET_AFC 0x003c
59 #define CMD_802_11_GET_AFC 0x003d
60 #define CMD_802_11_AD_HOC_STOP 0x0040
61 #define CMD_802_11_HOST_SLEEP_CFG 0x0043
62 #define CMD_802_11_WAKEUP_CONFIRM 0x0044
63 #define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
64 #define CMD_802_11_BEACON_STOP 0x0049
65 #define CMD_802_11_MAC_ADDRESS 0x004d
66 #define CMD_802_11_LED_GPIO_CTRL 0x004e
67 #define CMD_802_11_EEPROM_ACCESS 0x0059
68 #define CMD_802_11_BAND_CONFIG 0x0058
69 #define CMD_GSPI_BUS_CONFIG 0x005a
70 #define CMD_802_11D_DOMAIN_INFO 0x005b
71 #define CMD_802_11_KEY_MATERIAL 0x005e
72 #define CMD_802_11_SLEEP_PARAMS 0x0066
73 #define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
74 #define CMD_802_11_SLEEP_PERIOD 0x0068
75 #define CMD_802_11_TPC_CFG 0x0072
76 #define CMD_802_11_PA_CFG 0x0073
77 #define CMD_802_11_FW_WAKE_METHOD 0x0074
78 #define CMD_802_11_SUBSCRIBE_EVENT 0x0075
79 #define CMD_802_11_RATE_ADAPT_RATESET 0x0076
80 #define CMD_802_11_TX_RATE_QUERY 0x007f
81 #define CMD_GET_TSF 0x0080
82 #define CMD_BT_ACCESS 0x0087
83 #define CMD_FWT_ACCESS 0x0095
84 #define CMD_802_11_MONITOR_MODE 0x0098
85 #define CMD_MESH_ACCESS 0x009b
86 #define CMD_MESH_CONFIG_OLD 0x00a3
87 #define CMD_MESH_CONFIG 0x00ac
88 #define CMD_SET_BOOT2_VER 0x00a5
89 #define CMD_FUNC_INIT 0x00a9
90 #define CMD_FUNC_SHUTDOWN 0x00aa
91 #define CMD_802_11_BEACON_CTRL 0x00b0
92
93 /* For the IEEE Power Save */
94 #define CMD_SUBCMD_ENTER_PS 0x0030
95 #define CMD_SUBCMD_EXIT_PS 0x0031
96 #define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034
97 #define CMD_SUBCMD_FULL_POWERDOWN 0x0035
98 #define CMD_SUBCMD_FULL_POWERUP 0x0036
99
100 #define CMD_ENABLE_RSN 0x0001
101 #define CMD_DISABLE_RSN 0x0000
102
103 #define CMD_ACT_GET 0x0000
104 #define CMD_ACT_SET 0x0001
105 #define CMD_ACT_GET_AES 0x0002
106 #define CMD_ACT_SET_AES 0x0003
107 #define CMD_ACT_REMOVE_AES 0x0004
108
109 /* Define action or option for CMD_802_11_SET_WEP */
110 #define CMD_ACT_ADD 0x0002
111 #define CMD_ACT_REMOVE 0x0004
112 #define CMD_ACT_USE_DEFAULT 0x0008
113
114 #define CMD_TYPE_WEP_40_BIT 0x01
115 #define CMD_TYPE_WEP_104_BIT 0x02
116
117 #define CMD_NUM_OF_WEP_KEYS 4
118
119 #define CMD_WEP_KEY_INDEX_MASK 0x3fff
120
121 /* Define action or option for CMD_802_11_RESET */
122 #define CMD_ACT_HALT 0x0003
123
124 /* Define action or option for CMD_802_11_SCAN */
125 #define CMD_BSS_TYPE_BSS 0x0001
126 #define CMD_BSS_TYPE_IBSS 0x0002
127 #define CMD_BSS_TYPE_ANY 0x0003
128
129 /* Define action or option for CMD_802_11_SCAN */
130 #define CMD_SCAN_TYPE_ACTIVE 0x0000
131 #define CMD_SCAN_TYPE_PASSIVE 0x0001
132
133 #define CMD_SCAN_RADIO_TYPE_BG 0
134
135 #define CMD_SCAN_PROBE_DELAY_TIME 0
136
137 /* Define action or option for CMD_MAC_CONTROL */
138 #define CMD_ACT_MAC_RX_ON 0x0001
139 #define CMD_ACT_MAC_TX_ON 0x0002
140 #define CMD_ACT_MAC_LOOPBACK_ON 0x0004
141 #define CMD_ACT_MAC_WEP_ENABLE 0x0008
142 #define CMD_ACT_MAC_INT_ENABLE 0x0010
143 #define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
144 #define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
145 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
146 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
147 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
148
149 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
150 #define CMD_SUBSCRIBE_RSSI_LOW 0x0001
151 #define CMD_SUBSCRIBE_SNR_LOW 0x0002
152 #define CMD_SUBSCRIBE_FAILCOUNT 0x0004
153 #define CMD_SUBSCRIBE_BCNMISS 0x0008
154 #define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
155 #define CMD_SUBSCRIBE_SNR_HIGH 0x0020
156
157 #define RADIO_PREAMBLE_LONG 0x00
158 #define RADIO_PREAMBLE_SHORT 0x02
159 #define RADIO_PREAMBLE_AUTO 0x04
160
161 /* Define action or option for CMD_802_11_RF_CHANNEL */
162 #define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
163 #define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
164
165 /* Define action or option for CMD_802_11_DATA_RATE */
166 #define CMD_ACT_SET_TX_AUTO 0x0000
167 #define CMD_ACT_SET_TX_FIX_RATE 0x0001
168 #define CMD_ACT_GET_TX_RATE 0x0002
169
170 #define CMD_ACT_SET_RX 0x0001
171 #define CMD_ACT_SET_TX 0x0002
172 #define CMD_ACT_SET_BOTH 0x0003
173 #define CMD_ACT_GET_RX 0x0004
174 #define CMD_ACT_GET_TX 0x0008
175 #define CMD_ACT_GET_BOTH 0x000c
176
177 /* Define action or option for CMD_802_11_PS_MODE */
178 #define CMD_TYPE_CAM 0x0000
179 #define CMD_TYPE_MAX_PSP 0x0001
180 #define CMD_TYPE_FAST_PSP 0x0002
181
182 /* Options for CMD_802_11_FW_WAKE_METHOD */
183 #define CMD_WAKE_METHOD_UNCHANGED 0x0000
184 #define CMD_WAKE_METHOD_COMMAND_INT 0x0001
185 #define CMD_WAKE_METHOD_GPIO 0x0002
186
187 /* Object IDs for CMD_802_11_SNMP_MIB */
188 #define SNMP_MIB_OID_BSS_TYPE 0x0000
189 #define SNMP_MIB_OID_OP_RATE_SET 0x0001
190 #define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
191 #define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
192 #define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
193 #define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
194 #define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
195 #define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
196 #define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
197 #define SNMP_MIB_OID_11D_ENABLE 0x0009
198 #define SNMP_MIB_OID_11H_ENABLE 0x000A
199
200 /* Define action or option for CMD_BT_ACCESS */
201 enum cmd_bt_access_opts {
202 /* The bt commands start at 5 instead of 1 because the old dft commands
203 * are mapped to 1-4. These old commands are no longer maintained and
204 * should not be called.
205 */
206 CMD_ACT_BT_ACCESS_ADD = 5,
207 CMD_ACT_BT_ACCESS_DEL,
208 CMD_ACT_BT_ACCESS_LIST,
209 CMD_ACT_BT_ACCESS_RESET,
210 CMD_ACT_BT_ACCESS_SET_INVERT,
211 CMD_ACT_BT_ACCESS_GET_INVERT
212 };
213
214 /* Define action or option for CMD_FWT_ACCESS */
215 enum cmd_fwt_access_opts {
216 CMD_ACT_FWT_ACCESS_ADD = 1,
217 CMD_ACT_FWT_ACCESS_DEL,
218 CMD_ACT_FWT_ACCESS_LOOKUP,
219 CMD_ACT_FWT_ACCESS_LIST,
220 CMD_ACT_FWT_ACCESS_LIST_ROUTE,
221 CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
222 CMD_ACT_FWT_ACCESS_RESET,
223 CMD_ACT_FWT_ACCESS_CLEANUP,
224 CMD_ACT_FWT_ACCESS_TIME,
225 };
226
227 /* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
228 enum cmd_wol_cfg_opts {
229 CMD_ACT_ACTION_NONE = 0,
230 CMD_ACT_SET_WOL_RULE,
231 CMD_ACT_GET_WOL_RULE,
232 CMD_ACT_RESET_WOL_RULE,
233 };
234
235 /* Define action or option for CMD_MESH_ACCESS */
236 enum cmd_mesh_access_opts {
237 CMD_ACT_MESH_GET_TTL = 1,
238 CMD_ACT_MESH_SET_TTL,
239 CMD_ACT_MESH_GET_STATS,
240 CMD_ACT_MESH_GET_ANYCAST,
241 CMD_ACT_MESH_SET_ANYCAST,
242 CMD_ACT_MESH_SET_LINK_COSTS,
243 CMD_ACT_MESH_GET_LINK_COSTS,
244 CMD_ACT_MESH_SET_BCAST_RATE,
245 CMD_ACT_MESH_GET_BCAST_RATE,
246 CMD_ACT_MESH_SET_RREQ_DELAY,
247 CMD_ACT_MESH_GET_RREQ_DELAY,
248 CMD_ACT_MESH_SET_ROUTE_EXP,
249 CMD_ACT_MESH_GET_ROUTE_EXP,
250 CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
251 CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
252 CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
253 };
254
255 /* Define actions and types for CMD_MESH_CONFIG */
256 enum cmd_mesh_config_actions {
257 CMD_ACT_MESH_CONFIG_STOP = 0,
258 CMD_ACT_MESH_CONFIG_START,
259 CMD_ACT_MESH_CONFIG_SET,
260 CMD_ACT_MESH_CONFIG_GET,
261 };
262
263 enum cmd_mesh_config_types {
264 CMD_TYPE_MESH_SET_BOOTFLAG = 1,
265 CMD_TYPE_MESH_SET_BOOTTIME,
266 CMD_TYPE_MESH_SET_DEF_CHANNEL,
267 CMD_TYPE_MESH_SET_MESH_IE,
268 CMD_TYPE_MESH_GET_DEFAULTS,
269 CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
270 };
271
272 /** Card Event definition */
273 #define MACREG_INT_CODE_TX_PPA_FREE 0
274 #define MACREG_INT_CODE_TX_DMA_DONE 1
275 #define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
276 #define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
277 #define MACREG_INT_CODE_LINK_SENSED 4
278 #define MACREG_INT_CODE_CMD_FINISHED 5
279 #define MACREG_INT_CODE_MIB_CHANGED 6
280 #define MACREG_INT_CODE_INIT_DONE 7
281 #define MACREG_INT_CODE_DEAUTHENTICATED 8
282 #define MACREG_INT_CODE_DISASSOCIATED 9
283 #define MACREG_INT_CODE_PS_AWAKE 10
284 #define MACREG_INT_CODE_PS_SLEEP 11
285 #define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
286 #define MACREG_INT_CODE_MIC_ERR_UNICAST 14
287 #define MACREG_INT_CODE_WM_AWAKE 15
288 #define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
289 #define MACREG_INT_CODE_ADHOC_BCN_LOST 17
290 #define MACREG_INT_CODE_HOST_AWAKE 18
291 #define MACREG_INT_CODE_STOP_TX 19
292 #define MACREG_INT_CODE_START_TX 20
293 #define MACREG_INT_CODE_CHANNEL_SWITCH 21
294 #define MACREG_INT_CODE_MEASUREMENT_RDY 22
295 #define MACREG_INT_CODE_WMM_CHANGE 23
296 #define MACREG_INT_CODE_BG_SCAN_REPORT 24
297 #define MACREG_INT_CODE_RSSI_LOW 25
298 #define MACREG_INT_CODE_SNR_LOW 26
299 #define MACREG_INT_CODE_MAX_FAIL 27
300 #define MACREG_INT_CODE_RSSI_HIGH 28
301 #define MACREG_INT_CODE_SNR_HIGH 29
302 #define MACREG_INT_CODE_MESH_AUTO_STARTED 35
303 #define MACREG_INT_CODE_FIRMWARE_READY 48
304
305 #endif
306
|
This page was automatically generated by the
LXR engine.
|