Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /* $Id: cosa.h,v 1.6 1999/01/06 14:02:44 kas Exp $ */
  2 
  3 /*
  4  *  Copyright (C) 1995-1997  Jan "Yenya" Kasprzak <kas@fi.muni.cz>
  5  *
  6  *  This program is free software; you can redistribute it and/or modify
  7  *  it under the terms of the GNU General Public License as published by
  8  *  the Free Software Foundation; either version 2 of the License, or
  9  *  (at your option) any later version.
 10  *
 11  *  This program is distributed in the hope that it will be useful,
 12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 14  *  GNU General Public License for more details.
 15  *
 16  *  You should have received a copy of the GNU General Public License
 17  *  along with this program; if not, write to the Free Software
 18  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 19  */
 20 
 21 #ifndef COSA_H__
 22 #define COSA_H__
 23 
 24 #include <linux/ioctl.h>
 25 
 26 #ifdef __KERNEL__
 27 /* status register - output bits */
 28 #define SR_RX_DMA_ENA   0x04    /* receiver DMA enable bit */
 29 #define SR_TX_DMA_ENA   0x08    /* transmitter DMA enable bit */
 30 #define SR_RST          0x10    /* SRP reset */
 31 #define SR_USR_INT_ENA  0x20    /* user interrupt enable bit */
 32 #define SR_TX_INT_ENA   0x40    /* transmitter interrupt enable bit */
 33 #define SR_RX_INT_ENA   0x80    /* receiver interrupt enable bit */
 34 
 35 /* status register - input bits */
 36 #define SR_USR_RQ       0x20    /* user interrupt request pending */
 37 #define SR_TX_RDY       0x40    /* transmitter empty (ready) */
 38 #define SR_RX_RDY       0x80    /* receiver data ready */
 39 
 40 #define SR_UP_REQUEST   0x02    /* request from SRP to transfer data
 41                                    up to PC */
 42 #define SR_DOWN_REQUEST 0x01    /* SRP is able to transfer data down
 43                                    from PC to SRP */
 44 #define SR_END_OF_TRANSFER      0x03    /* SRP signalize end of
 45                                            transfer (up or down) */
 46 
 47 #define SR_CMD_FROM_SRP_MASK    0x03    /* mask to get SRP command */
 48 
 49 /* bits in driver status byte definitions : */
 50 #define SR_RDY_RCV      0x01    /* ready to receive packet */
 51 #define SR_RDY_SND      0x02    /* ready to send packet */
 52 #define SR_CMD_PND      0x04    /* command pending */ /* not currently used */
 53 
 54 /* ???? */
 55 #define SR_PKT_UP       0x01    /* transfer of packet up in progress */
 56 #define SR_PKT_DOWN     0x02    /* transfer of packet down in progress */
 57 
 58 #endif /* __KERNEL__ */
 59 
 60 #define SR_LOAD_ADDR    0x4400  /* SRP microcode load address */
 61 #define SR_START_ADDR   0x4400  /* SRP microcode start address */
 62 
 63 #define COSA_LOAD_ADDR    0x400  /* SRP microcode load address */
 64 #define COSA_MAX_FIRMWARE_SIZE  0x10000
 65 
 66 /* ioctls */
 67 struct cosa_download {
 68         int addr, len;
 69         char __user *code;
 70 };
 71 
 72 /* Reset the device */
 73 #define COSAIORSET      _IO('C',0xf0)
 74 
 75 /* Start microcode at given address */
 76 #define COSAIOSTRT      _IOW('C',0xf1, int)
 77 
 78 /* Read the block from the device memory */
 79 #define COSAIORMEM      _IOWR('C',0xf2, struct cosa_download *)
 80         /* actually the struct cosa_download itself; this is to keep
 81          * the ioctl number same as in 2.4 in order to keep the user-space
 82          * utils compatible. */
 83 
 84 /* Write the block to the device memory (i.e. download the microcode) */
 85 #define COSAIODOWNLD    _IOW('C',0xf2, struct cosa_download *)
 86         /* actually the struct cosa_download itself; this is to keep
 87          * the ioctl number same as in 2.4 in order to keep the user-space
 88          * utils compatible. */
 89 
 90 /* Read the device type (one of "srp", "cosa", and "cosa8" for now) */
 91 #define COSAIORTYPE     _IOR('C',0xf3, char *)
 92 
 93 /* Read the device identification string */
 94 #define COSAIORIDSTR    _IOR('C',0xf4, char *)
 95 /* Maximum length of the identification string. */
 96 #define COSA_MAX_ID_STRING 128
 97 
 98 /* Increment/decrement the module usage count :-) */
 99 /* #define COSAIOMINC   _IO('C',0xf5) */
100 /* #define COSAIOMDEC   _IO('C',0xf6) */
101 
102 /* Get the total number of cards installed */
103 #define COSAIONRCARDS   _IO('C',0xf7)
104 
105 /* Get the number of channels on this card */
106 #define COSAIONRCHANS   _IO('C',0xf8)
107 
108 /* Set the driver for the bus-master operations */
109 #define COSAIOBMSET     _IOW('C', 0xf9, unsigned short)
110 
111 #define COSA_BM_OFF     0       /* Bus-mastering off - use ISA DMA (default) */
112 #define COSA_BM_ON      1       /* Bus-mastering on - faster but untested */
113 
114 /* Gets the busmaster status */
115 #define COSAIOBMGET     _IO('C', 0xfa)
116 
117 #endif /* !COSA_H__ */
118 
  This page was automatically generated by the LXR engine.