Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /* netsc520.c -- MTD map driver for AMD NetSc520 Demonstration Board
  2  *
  3  * Copyright (C) 2001 Mark Langsdorf (mark.langsdorf@amd.com)
  4  *      based on sc520cdp.c by Sysgo Real-Time Solutions GmbH
  5  *
  6  * This program is free software; you can redistribute it and/or modify
  7  * it under the terms of the GNU General Public License as published by
  8  * the Free Software Foundation; either version 2 of the License, or
  9  * (at your option) any later version.
 10  *
 11  * This program is distributed in the hope that it will be useful,
 12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 14  * GNU General Public License for more details.
 15  *
 16  * You should have received a copy of the GNU General Public License
 17  * along with this program; if not, write to the Free Software
 18  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 19  *
 20  * The NetSc520 is a demonstration board for the Elan Sc520 processor available
 21  * from AMD.  It has a single back of 16 megs of 32-bit Flash ROM and another
 22  * 16 megs of SDRAM.
 23  */
 24 
 25 #include <linux/module.h>
 26 #include <linux/types.h>
 27 #include <linux/kernel.h>
 28 #include <linux/init.h>
 29 #include <asm/io.h>
 30 #include <linux/mtd/mtd.h>
 31 #include <linux/mtd/map.h>
 32 #include <linux/mtd/partitions.h>
 33 
 34 
 35 /*
 36 ** The single, 16 megabyte flash bank is divided into four virtual
 37 ** partitions.  The first partition is 768 KiB and is intended to
 38 ** store the kernel image loaded by the bootstrap loader.  The second
 39 ** partition is 256 KiB and holds the BIOS image.  The third
 40 ** partition is 14.5 MiB and is intended for the flash file system
 41 ** image.  The last partition is 512 KiB and contains another copy
 42 ** of the BIOS image and the reset vector.
 43 **
 44 ** Only the third partition should be mounted.  The first partition
 45 ** should not be mounted, but it can erased and written to using the
 46 ** MTD character routines.  The second and fourth partitions should
 47 ** not be touched - it is possible to corrupt the BIOS image by
 48 ** mounting these partitions, and potentially the board will not be
 49 ** recoverable afterwards.
 50 */
 51 
 52 /* partition_info gives details on the logical partitions that the split the
 53  * single flash device into. If the size if zero we use up to the end of the
 54  * device. */
 55 static struct mtd_partition partition_info[]={
 56     {
 57             .name = "NetSc520 boot kernel",
 58             .offset = 0,
 59             .size = 0xc0000
 60     },
 61     {
 62             .name = "NetSc520 Low BIOS",
 63             .offset = 0xc0000,
 64             .size = 0x40000
 65     },
 66     {
 67             .name = "NetSc520 file system",
 68             .offset = 0x100000,
 69             .size = 0xe80000
 70     },
 71     {
 72             .name = "NetSc520 High BIOS",
 73             .offset = 0xf80000,
 74             .size = 0x80000
 75     },
 76 };
 77 #define NUM_PARTITIONS ARRAY_SIZE(partition_info)
 78 
 79 #define WINDOW_SIZE     0x00100000
 80 #define WINDOW_ADDR     0x00200000
 81 
 82 static struct map_info netsc520_map = {
 83         .name = "netsc520 Flash Bank",
 84         .size = WINDOW_SIZE,
 85         .bankwidth = 4,
 86         .phys = WINDOW_ADDR,
 87 };
 88 
 89 #define NUM_FLASH_BANKS ARRAY_SIZE(netsc520_map)
 90 
 91 static struct mtd_info *mymtd;
 92 
 93 static int __init init_netsc520(void)
 94 {
 95         printk(KERN_NOTICE "NetSc520 flash device: 0x%Lx at 0x%Lx\n",
 96                         (unsigned long long)netsc520_map.size,
 97                         (unsigned long long)netsc520_map.phys);
 98         netsc520_map.virt = ioremap_nocache(netsc520_map.phys, netsc520_map.size);
 99 
100         if (!netsc520_map.virt) {
101                 printk("Failed to ioremap_nocache\n");
102                 return -EIO;
103         }
104 
105         simple_map_init(&netsc520_map);
106 
107         mymtd = do_map_probe("cfi_probe", &netsc520_map);
108         if(!mymtd)
109                 mymtd = do_map_probe("map_ram", &netsc520_map);
110         if(!mymtd)
111                 mymtd = do_map_probe("map_rom", &netsc520_map);
112 
113         if (!mymtd) {
114                 iounmap(netsc520_map.virt);
115                 return -ENXIO;
116         }
117 
118         mymtd->owner = THIS_MODULE;
119         add_mtd_partitions( mymtd, partition_info, NUM_PARTITIONS );
120         return 0;
121 }
122 
123 static void __exit cleanup_netsc520(void)
124 {
125         if (mymtd) {
126                 del_mtd_partitions(mymtd);
127                 map_destroy(mymtd);
128         }
129         if (netsc520_map.virt) {
130                 iounmap(netsc520_map.virt);
131                 netsc520_map.virt = NULL;
132         }
133 }
134 
135 module_init(init_netsc520);
136 module_exit(cleanup_netsc520);
137 
138 MODULE_LICENSE("GPL");
139 MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@amd.com>");
140 MODULE_DESCRIPTION("MTD map driver for AMD NetSc520 Demonstration Board");
141 
  This page was automatically generated by the LXR engine.