1 /*
2 * linux/drivers/mmc/host/pxa.c - PXA MMCI driver
3 *
4 * Copyright (C) 2003 Russell King, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This hardware is really sick:
11 * - No way to clear interrupts.
12 * - Have to turn off the clock whenever we touch the device.
13 * - Doesn't tell you how many data blocks were transferred.
14 * Yuck!
15 *
16 * 1 and 3 byte data transfers not supported
17 * max block length up to 1023
18 */
19 #include <linux/module.h>
20 #include <linux/init.h>
21 #include <linux/ioport.h>
22 #include <linux/platform_device.h>
23 #include <linux/delay.h>
24 #include <linux/interrupt.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/clk.h>
27 #include <linux/err.h>
28 #include <linux/mmc/host.h>
29 #include <linux/io.h>
30 #include <linux/regulator/consumer.h>
31
32 #include <asm/sizes.h>
33
34 #include <mach/hardware.h>
35 #include <mach/dma.h>
36 #include <mach/mmc.h>
37
38 #include "pxamci.h"
39
40 #define DRIVER_NAME "pxa2xx-mci"
41
42 #define NR_SG 1
43 #define CLKRT_OFF (~0)
44
45 struct pxamci_host {
46 struct mmc_host *mmc;
47 spinlock_t lock;
48 struct resource *res;
49 void __iomem *base;
50 struct clk *clk;
51 unsigned long clkrate;
52 int irq;
53 int dma;
54 unsigned int clkrt;
55 unsigned int cmdat;
56 unsigned int imask;
57 unsigned int power_mode;
58 struct pxamci_platform_data *pdata;
59
60 struct mmc_request *mrq;
61 struct mmc_command *cmd;
62 struct mmc_data *data;
63
64 dma_addr_t sg_dma;
65 struct pxa_dma_desc *sg_cpu;
66 unsigned int dma_len;
67
68 unsigned int dma_dir;
69 unsigned int dma_drcmrrx;
70 unsigned int dma_drcmrtx;
71
72 struct regulator *vcc;
73 };
74
75 static inline void pxamci_init_ocr(struct pxamci_host *host)
76 {
77 #ifdef CONFIG_REGULATOR
78 host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
79
80 if (IS_ERR(host->vcc))
81 host->vcc = NULL;
82 else {
83 host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
84 if (host->pdata && host->pdata->ocr_mask)
85 dev_warn(mmc_dev(host->mmc),
86 "ocr_mask/setpower will not be used\n");
87 }
88 #endif
89 if (host->vcc == NULL) {
90 /* fall-back to platform data */
91 host->mmc->ocr_avail = host->pdata ?
92 host->pdata->ocr_mask :
93 MMC_VDD_32_33 | MMC_VDD_33_34;
94 }
95 }
96
97 static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
98 {
99 #ifdef CONFIG_REGULATOR
100 if (host->vcc)
101 mmc_regulator_set_ocr(host->vcc, vdd);
102 #endif
103 if (!host->vcc && host->pdata && host->pdata->setpower)
104 host->pdata->setpower(mmc_dev(host->mmc), vdd);
105 }
106
107 static void pxamci_stop_clock(struct pxamci_host *host)
108 {
109 if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
110 unsigned long timeout = 10000;
111 unsigned int v;
112
113 writel(STOP_CLOCK, host->base + MMC_STRPCL);
114
115 do {
116 v = readl(host->base + MMC_STAT);
117 if (!(v & STAT_CLK_EN))
118 break;
119 udelay(1);
120 } while (timeout--);
121
122 if (v & STAT_CLK_EN)
123 dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
124 }
125 }
126
127 static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
128 {
129 unsigned long flags;
130
131 spin_lock_irqsave(&host->lock, flags);
132 host->imask &= ~mask;
133 writel(host->imask, host->base + MMC_I_MASK);
134 spin_unlock_irqrestore(&host->lock, flags);
135 }
136
137 static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
138 {
139 unsigned long flags;
140
141 spin_lock_irqsave(&host->lock, flags);
142 host->imask |= mask;
143 writel(host->imask, host->base + MMC_I_MASK);
144 spin_unlock_irqrestore(&host->lock, flags);
145 }
146
147 static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
148 {
149 unsigned int nob = data->blocks;
150 unsigned long long clks;
151 unsigned int timeout;
152 bool dalgn = 0;
153 u32 dcmd;
154 int i;
155
156 host->data = data;
157
158 if (data->flags & MMC_DATA_STREAM)
159 nob = 0xffff;
160
161 writel(nob, host->base + MMC_NOB);
162 writel(data->blksz, host->base + MMC_BLKLEN);
163
164 clks = (unsigned long long)data->timeout_ns * host->clkrate;
165 do_div(clks, 1000000000UL);
166 timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
167 writel((timeout + 255) / 256, host->base + MMC_RDTO);
168
169 if (data->flags & MMC_DATA_READ) {
170 host->dma_dir = DMA_FROM_DEVICE;
171 dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
172 DRCMR(host->dma_drcmrtx) = 0;
173 DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
174 } else {
175 host->dma_dir = DMA_TO_DEVICE;
176 dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
177 DRCMR(host->dma_drcmrrx) = 0;
178 DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
179 }
180
181 dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
182
183 host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
184 host->dma_dir);
185
186 for (i = 0; i < host->dma_len; i++) {
187 unsigned int length = sg_dma_len(&data->sg[i]);
188 host->sg_cpu[i].dcmd = dcmd | length;
189 if (length & 31 && !(data->flags & MMC_DATA_READ))
190 host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
191 /* Not aligned to 8-byte boundary? */
192 if (sg_dma_address(&data->sg[i]) & 0x7)
193 dalgn = 1;
194 if (data->flags & MMC_DATA_READ) {
195 host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
196 host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
197 } else {
198 host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
199 host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
200 }
201 host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
202 sizeof(struct pxa_dma_desc);
203 }
204 host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
205 wmb();
206
207 /*
208 * The PXA27x DMA controller encounters overhead when working with
209 * unaligned (to 8-byte boundaries) data, so switch on byte alignment
210 * mode only if we have unaligned data.
211 */
212 if (dalgn)
213 DALGN |= (1 << host->dma);
214 else
215 DALGN &= ~(1 << host->dma);
216 DDADR(host->dma) = host->sg_dma;
217
218 /*
219 * workaround for erratum #91:
220 * only start DMA now if we are doing a read,
221 * otherwise we wait until CMD/RESP has finished
222 * before starting DMA.
223 */
224 if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
225 DCSR(host->dma) = DCSR_RUN;
226 }
227
228 static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
229 {
230 WARN_ON(host->cmd != NULL);
231 host->cmd = cmd;
232
233 if (cmd->flags & MMC_RSP_BUSY)
234 cmdat |= CMDAT_BUSY;
235
236 #define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
237 switch (RSP_TYPE(mmc_resp_type(cmd))) {
238 case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
239 cmdat |= CMDAT_RESP_SHORT;
240 break;
241 case RSP_TYPE(MMC_RSP_R3):
242 cmdat |= CMDAT_RESP_R3;
243 break;
244 case RSP_TYPE(MMC_RSP_R2):
245 cmdat |= CMDAT_RESP_R2;
246 break;
247 default:
248 break;
249 }
250
251 writel(cmd->opcode, host->base + MMC_CMD);
252 writel(cmd->arg >> 16, host->base + MMC_ARGH);
253 writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
254 writel(cmdat, host->base + MMC_CMDAT);
255 writel(host->clkrt, host->base + MMC_CLKRT);
256
257 writel(START_CLOCK, host->base + MMC_STRPCL);
258
259 pxamci_enable_irq(host, END_CMD_RES);
260 }
261
262 static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
263 {
264 host->mrq = NULL;
265 host->cmd = NULL;
266 host->data = NULL;
267 mmc_request_done(host->mmc, mrq);
268 }
269
270 static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
271 {
272 struct mmc_command *cmd = host->cmd;
273 int i;
274 u32 v;
275
276 if (!cmd)
277 return 0;
278
279 host->cmd = NULL;
280
281 /*
282 * Did I mention this is Sick. We always need to
283 * discard the upper 8 bits of the first 16-bit word.
284 */
285 v = readl(host->base + MMC_RES) & 0xffff;
286 for (i = 0; i < 4; i++) {
287 u32 w1 = readl(host->base + MMC_RES) & 0xffff;
288 u32 w2 = readl(host->base + MMC_RES) & 0xffff;
289 cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
290 v = w2;
291 }
292
293 if (stat & STAT_TIME_OUT_RESPONSE) {
294 cmd->error = -ETIMEDOUT;
295 } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
296 /*
297 * workaround for erratum #42:
298 * Intel PXA27x Family Processor Specification Update Rev 001
299 * A bogus CRC error can appear if the msb of a 136 bit
300 * response is a one.
301 */
302 if (cpu_is_pxa27x() &&
303 (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
304 pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
305 else
306 cmd->error = -EILSEQ;
307 }
308
309 pxamci_disable_irq(host, END_CMD_RES);
310 if (host->data && !cmd->error) {
311 pxamci_enable_irq(host, DATA_TRAN_DONE);
312 /*
313 * workaround for erratum #91, if doing write
314 * enable DMA late
315 */
316 if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
317 DCSR(host->dma) = DCSR_RUN;
318 } else {
319 pxamci_finish_request(host, host->mrq);
320 }
321
322 return 1;
323 }
324
325 static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
326 {
327 struct mmc_data *data = host->data;
328
329 if (!data)
330 return 0;
331
332 DCSR(host->dma) = 0;
333 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
334 host->dma_dir);
335
336 if (stat & STAT_READ_TIME_OUT)
337 data->error = -ETIMEDOUT;
338 else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
339 data->error = -EILSEQ;
340
341 /*
342 * There appears to be a hardware design bug here. There seems to
343 * be no way to find out how much data was transferred to the card.
344 * This means that if there was an error on any block, we mark all
345 * data blocks as being in error.
346 */
347 if (!data->error)
348 data->bytes_xfered = data->blocks * data->blksz;
349 else
350 data->bytes_xfered = 0;
351
352 pxamci_disable_irq(host, DATA_TRAN_DONE);
353
354 host->data = NULL;
355 if (host->mrq->stop) {
356 pxamci_stop_clock(host);
357 pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
358 } else {
359 pxamci_finish_request(host, host->mrq);
360 }
361
362 return 1;
363 }
364
365 static irqreturn_t pxamci_irq(int irq, void *devid)
366 {
367 struct pxamci_host *host = devid;
368 unsigned int ireg;
369 int handled = 0;
370
371 ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
372
373 if (ireg) {
374 unsigned stat = readl(host->base + MMC_STAT);
375
376 pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
377
378 if (ireg & END_CMD_RES)
379 handled |= pxamci_cmd_done(host, stat);
380 if (ireg & DATA_TRAN_DONE)
381 handled |= pxamci_data_done(host, stat);
382 if (ireg & SDIO_INT) {
383 mmc_signal_sdio_irq(host->mmc);
384 handled = 1;
385 }
386 }
387
388 return IRQ_RETVAL(handled);
389 }
390
391 static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
392 {
393 struct pxamci_host *host = mmc_priv(mmc);
394 unsigned int cmdat;
395
396 WARN_ON(host->mrq != NULL);
397
398 host->mrq = mrq;
399
400 pxamci_stop_clock(host);
401
402 cmdat = host->cmdat;
403 host->cmdat &= ~CMDAT_INIT;
404
405 if (mrq->data) {
406 pxamci_setup_data(host, mrq->data);
407
408 cmdat &= ~CMDAT_BUSY;
409 cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
410 if (mrq->data->flags & MMC_DATA_WRITE)
411 cmdat |= CMDAT_WRITE;
412
413 if (mrq->data->flags & MMC_DATA_STREAM)
414 cmdat |= CMDAT_STREAM;
415 }
416
417 pxamci_start_cmd(host, mrq->cmd, cmdat);
418 }
419
420 static int pxamci_get_ro(struct mmc_host *mmc)
421 {
422 struct pxamci_host *host = mmc_priv(mmc);
423
424 if (host->pdata && host->pdata->get_ro)
425 return !!host->pdata->get_ro(mmc_dev(mmc));
426 /*
427 * Board doesn't support read only detection; let the mmc core
428 * decide what to do.
429 */
430 return -ENOSYS;
431 }
432
433 static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
434 {
435 struct pxamci_host *host = mmc_priv(mmc);
436
437 if (ios->clock) {
438 unsigned long rate = host->clkrate;
439 unsigned int clk = rate / ios->clock;
440
441 if (host->clkrt == CLKRT_OFF)
442 clk_enable(host->clk);
443
444 if (ios->clock == 26000000) {
445 /* to support 26MHz on pxa300/pxa310 */
446 host->clkrt = 7;
447 } else {
448 /* to handle (19.5MHz, 26MHz) */
449 if (!clk)
450 clk = 1;
451
452 /*
453 * clk might result in a lower divisor than we
454 * desire. check for that condition and adjust
455 * as appropriate.
456 */
457 if (rate / clk > ios->clock)
458 clk <<= 1;
459 host->clkrt = fls(clk) - 1;
460 }
461
462 /*
463 * we write clkrt on the next command
464 */
465 } else {
466 pxamci_stop_clock(host);
467 if (host->clkrt != CLKRT_OFF) {
468 host->clkrt = CLKRT_OFF;
469 clk_disable(host->clk);
470 }
471 }
472
473 if (host->power_mode != ios->power_mode) {
474 host->power_mode = ios->power_mode;
475
476 pxamci_set_power(host, ios->vdd);
477
478 if (ios->power_mode == MMC_POWER_ON)
479 host->cmdat |= CMDAT_INIT;
480 }
481
482 if (ios->bus_width == MMC_BUS_WIDTH_4)
483 host->cmdat |= CMDAT_SD_4DAT;
484 else
485 host->cmdat &= ~CMDAT_SD_4DAT;
486
487 pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
488 host->clkrt, host->cmdat);
489 }
490
491 static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
492 {
493 struct pxamci_host *pxa_host = mmc_priv(host);
494
495 if (enable)
496 pxamci_enable_irq(pxa_host, SDIO_INT);
497 else
498 pxamci_disable_irq(pxa_host, SDIO_INT);
499 }
500
501 static const struct mmc_host_ops pxamci_ops = {
502 .request = pxamci_request,
503 .get_ro = pxamci_get_ro,
504 .set_ios = pxamci_set_ios,
505 .enable_sdio_irq = pxamci_enable_sdio_irq,
506 };
507
508 static void pxamci_dma_irq(int dma, void *devid)
509 {
510 struct pxamci_host *host = devid;
511 int dcsr = DCSR(dma);
512 DCSR(dma) = dcsr & ~DCSR_STOPIRQEN;
513
514 if (dcsr & DCSR_ENDINTR) {
515 writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
516 } else {
517 printk(KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n",
518 mmc_hostname(host->mmc), dma, dcsr);
519 host->data->error = -EIO;
520 pxamci_data_done(host, 0);
521 }
522 }
523
524 static irqreturn_t pxamci_detect_irq(int irq, void *devid)
525 {
526 struct pxamci_host *host = mmc_priv(devid);
527
528 mmc_detect_change(devid, host->pdata->detect_delay);
529 return IRQ_HANDLED;
530 }
531
532 static int pxamci_probe(struct platform_device *pdev)
533 {
534 struct mmc_host *mmc;
535 struct pxamci_host *host = NULL;
536 struct resource *r, *dmarx, *dmatx;
537 int ret, irq;
538
539 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
540 irq = platform_get_irq(pdev, 0);
541 if (!r || irq < 0)
542 return -ENXIO;
543
544 r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
545 if (!r)
546 return -EBUSY;
547
548 mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev);
549 if (!mmc) {
550 ret = -ENOMEM;
551 goto out;
552 }
553
554 mmc->ops = &pxamci_ops;
555
556 /*
557 * We can do SG-DMA, but we don't because we never know how much
558 * data we successfully wrote to the card.
559 */
560 mmc->max_phys_segs = NR_SG;
561
562 /*
563 * Our hardware DMA can handle a maximum of one page per SG entry.
564 */
565 mmc->max_seg_size = PAGE_SIZE;
566
567 /*
568 * Block length register is only 10 bits before PXA27x.
569 */
570 mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048;
571
572 /*
573 * Block count register is 16 bits.
574 */
575 mmc->max_blk_count = 65535;
576
577 host = mmc_priv(mmc);
578 host->mmc = mmc;
579 host->dma = -1;
580 host->pdata = pdev->dev.platform_data;
581 host->clkrt = CLKRT_OFF;
582
583 host->clk = clk_get(&pdev->dev, NULL);
584 if (IS_ERR(host->clk)) {
585 ret = PTR_ERR(host->clk);
586 host->clk = NULL;
587 goto out;
588 }
589
590 host->clkrate = clk_get_rate(host->clk);
591
592 /*
593 * Calculate minimum clock rate, rounding up.
594 */
595 mmc->f_min = (host->clkrate + 63) / 64;
596 mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
597 : host->clkrate;
598
599 pxamci_init_ocr(host);
600
601 mmc->caps = 0;
602 host->cmdat = 0;
603 if (!cpu_is_pxa25x()) {
604 mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
605 host->cmdat |= CMDAT_SDIO_INT_EN;
606 if (cpu_is_pxa300() || cpu_is_pxa310())
607 mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
608 MMC_CAP_SD_HIGHSPEED;
609 }
610
611 host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
612 if (!host->sg_cpu) {
613 ret = -ENOMEM;
614 goto out;
615 }
616
617 spin_lock_init(&host->lock);
618 host->res = r;
619 host->irq = irq;
620 host->imask = MMC_I_MASK_ALL;
621
622 host->base = ioremap(r->start, SZ_4K);
623 if (!host->base) {
624 ret = -ENOMEM;
625 goto out;
626 }
627
628 /*
629 * Ensure that the host controller is shut down, and setup
630 * with our defaults.
631 */
632 pxamci_stop_clock(host);
633 writel(0, host->base + MMC_SPI);
634 writel(64, host->base + MMC_RESTO);
635 writel(host->imask, host->base + MMC_I_MASK);
636
637 host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW,
638 pxamci_dma_irq, host);
639 if (host->dma < 0) {
640 ret = -EBUSY;
641 goto out;
642 }
643
644 ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
645 if (ret)
646 goto out;
647
648 platform_set_drvdata(pdev, mmc);
649
650 dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
651 if (!dmarx) {
652 ret = -ENXIO;
653 goto out;
654 }
655 host->dma_drcmrrx = dmarx->start;
656
657 dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
658 if (!dmatx) {
659 ret = -ENXIO;
660 goto out;
661 }
662 host->dma_drcmrtx = dmatx->start;
663
664 if (host->pdata && host->pdata->init)
665 host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
666
667 mmc_add_host(mmc);
668
669 return 0;
670
671 out:
672 if (host) {
673 if (host->dma >= 0)
674 pxa_free_dma(host->dma);
675 if (host->base)
676 iounmap(host->base);
677 if (host->sg_cpu)
678 dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
679 if (host->clk)
680 clk_put(host->clk);
681 }
682 if (mmc)
683 mmc_free_host(mmc);
684 release_resource(r);
685 return ret;
686 }
687
688 static int pxamci_remove(struct platform_device *pdev)
689 {
690 struct mmc_host *mmc = platform_get_drvdata(pdev);
691
692 platform_set_drvdata(pdev, NULL);
693
694 if (mmc) {
695 struct pxamci_host *host = mmc_priv(mmc);
696
697 mmc_remove_host(mmc);
698
699 if (host->vcc)
700 regulator_put(host->vcc);
701
702 if (host->pdata && host->pdata->exit)
703 host->pdata->exit(&pdev->dev, mmc);
704
705 pxamci_stop_clock(host);
706 writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
707 END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
708 host->base + MMC_I_MASK);
709
710 DRCMR(host->dma_drcmrrx) = 0;
711 DRCMR(host->dma_drcmrtx) = 0;
712
713 free_irq(host->irq, host);
714 pxa_free_dma(host->dma);
715 iounmap(host->base);
716 dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
717
718 clk_put(host->clk);
719
720 release_resource(host->res);
721
722 mmc_free_host(mmc);
723 }
724 return 0;
725 }
726
727 #ifdef CONFIG_PM
728 static int pxamci_suspend(struct platform_device *dev, pm_message_t state)
729 {
730 struct mmc_host *mmc = platform_get_drvdata(dev);
731 int ret = 0;
732
733 if (mmc)
734 ret = mmc_suspend_host(mmc, state);
735
736 return ret;
737 }
738
739 static int pxamci_resume(struct platform_device *dev)
740 {
741 struct mmc_host *mmc = platform_get_drvdata(dev);
742 int ret = 0;
743
744 if (mmc)
745 ret = mmc_resume_host(mmc);
746
747 return ret;
748 }
749 #else
750 #define pxamci_suspend NULL
751 #define pxamci_resume NULL
752 #endif
753
754 static struct platform_driver pxamci_driver = {
755 .probe = pxamci_probe,
756 .remove = pxamci_remove,
757 .suspend = pxamci_suspend,
758 .resume = pxamci_resume,
759 .driver = {
760 .name = DRIVER_NAME,
761 .owner = THIS_MODULE,
762 },
763 };
764
765 static int __init pxamci_init(void)
766 {
767 return platform_driver_register(&pxamci_driver);
768 }
769
770 static void __exit pxamci_exit(void)
771 {
772 platform_driver_unregister(&pxamci_driver);
773 }
774
775 module_init(pxamci_init);
776 module_exit(pxamci_exit);
777
778 MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
779 MODULE_LICENSE("GPL");
780 MODULE_ALIAS("platform:pxa2xx-mci");
781
|
This page was automatically generated by the
LXR engine.
|