Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * $Id: amikbd.c,v 1.13 2002/02/01 16:02:24 vojtech Exp $
  3  *
  4  *  Copyright (c) 2000-2001 Vojtech Pavlik
  5  *
  6  *  Based on the work of:
  7  *      Hamish Macdonald
  8  */
  9 
 10 /*
 11  * Amiga keyboard driver for Linux/m68k
 12  */
 13 
 14 /*
 15  * This program is free software; you can redistribute it and/or modify
 16  * it under the terms of the GNU General Public License as published by
 17  * the Free Software Foundation; either version 2 of the License, or
 18  * (at your option) any later version.
 19  *
 20  * This program is distributed in the hope that it will be useful,
 21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 23  * GNU General Public License for more details.
 24  *
 25  * You should have received a copy of the GNU General Public License
 26  * along with this program; if not, write to the Free Software
 27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 28  *
 29  * Should you need to contact me, the author, you can do so either by
 30  * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
 31  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
 32  */
 33 
 34 #include <linux/module.h>
 35 #include <linux/init.h>
 36 #include <linux/input.h>
 37 #include <linux/delay.h>
 38 #include <linux/interrupt.h>
 39 #include <linux/keyboard.h>
 40 
 41 #include <asm/amigaints.h>
 42 #include <asm/amigahw.h>
 43 #include <asm/irq.h>
 44 
 45 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 46 MODULE_DESCRIPTION("Amiga keyboard driver");
 47 MODULE_LICENSE("GPL");
 48 
 49 static unsigned char amikbd_keycode[0x78] __initdata = {
 50         [0]      = KEY_GRAVE,
 51         [1]      = KEY_1,
 52         [2]      = KEY_2,
 53         [3]      = KEY_3,
 54         [4]      = KEY_4,
 55         [5]      = KEY_5,
 56         [6]      = KEY_6,
 57         [7]      = KEY_7,
 58         [8]      = KEY_8,
 59         [9]      = KEY_9,
 60         [10]     = KEY_0,
 61         [11]     = KEY_MINUS,
 62         [12]     = KEY_EQUAL,
 63         [13]     = KEY_BACKSLASH,
 64         [15]     = KEY_KP0,
 65         [16]     = KEY_Q,
 66         [17]     = KEY_W,
 67         [18]     = KEY_E,
 68         [19]     = KEY_R,
 69         [20]     = KEY_T,
 70         [21]     = KEY_Y,
 71         [22]     = KEY_U,
 72         [23]     = KEY_I,
 73         [24]     = KEY_O,
 74         [25]     = KEY_P,
 75         [26]     = KEY_LEFTBRACE,
 76         [27]     = KEY_RIGHTBRACE,
 77         [29]     = KEY_KP1,
 78         [30]     = KEY_KP2,
 79         [31]     = KEY_KP3,
 80         [32]     = KEY_A,
 81         [33]     = KEY_S,
 82         [34]     = KEY_D,
 83         [35]     = KEY_F,
 84         [36]     = KEY_G,
 85         [37]     = KEY_H,
 86         [38]     = KEY_J,
 87         [39]     = KEY_K,
 88         [40]     = KEY_L,
 89         [41]     = KEY_SEMICOLON,
 90         [42]     = KEY_APOSTROPHE,
 91         [43]     = KEY_BACKSLASH,
 92         [45]     = KEY_KP4,
 93         [46]     = KEY_KP5,
 94         [47]     = KEY_KP6,
 95         [48]     = KEY_102ND,
 96         [49]     = KEY_Z,
 97         [50]     = KEY_X,
 98         [51]     = KEY_C,
 99         [52]     = KEY_V,
100         [53]     = KEY_B,
101         [54]     = KEY_N,
102         [55]     = KEY_M,
103         [56]     = KEY_COMMA,
104         [57]     = KEY_DOT,
105         [58]     = KEY_SLASH,
106         [60]     = KEY_KPDOT,
107         [61]     = KEY_KP7,
108         [62]     = KEY_KP8,
109         [63]     = KEY_KP9,
110         [64]     = KEY_SPACE,
111         [65]     = KEY_BACKSPACE,
112         [66]     = KEY_TAB,
113         [67]     = KEY_KPENTER,
114         [68]     = KEY_ENTER,
115         [69]     = KEY_ESC,
116         [70]     = KEY_DELETE,
117         [74]     = KEY_KPMINUS,
118         [76]     = KEY_UP,
119         [77]     = KEY_DOWN,
120         [78]     = KEY_RIGHT,
121         [79]     = KEY_LEFT,
122         [80]     = KEY_F1,
123         [81]     = KEY_F2,
124         [82]     = KEY_F3,
125         [83]     = KEY_F4,
126         [84]     = KEY_F5,
127         [85]     = KEY_F6,
128         [86]     = KEY_F7,
129         [87]     = KEY_F8,
130         [88]     = KEY_F9,
131         [89]     = KEY_F10,
132         [90]     = KEY_KPLEFTPAREN,
133         [91]     = KEY_KPRIGHTPAREN,
134         [92]     = KEY_KPSLASH,
135         [93]     = KEY_KPASTERISK,
136         [94]     = KEY_KPPLUS,
137         [95]     = KEY_HELP,
138         [96]     = KEY_LEFTSHIFT,
139         [97]     = KEY_RIGHTSHIFT,
140         [98]     = KEY_CAPSLOCK,
141         [99]     = KEY_LEFTCTRL,
142         [100]    = KEY_LEFTALT,
143         [101]    = KEY_RIGHTALT,
144         [102]    = KEY_LEFTMETA,
145         [103]    = KEY_RIGHTMETA
146 };
147 
148 static const char *amikbd_messages[8] = {
149         [0] = KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n",
150         [1] = KERN_WARNING "amikbd: keyboard lost sync\n",
151         [2] = KERN_WARNING "amikbd: keyboard buffer overflow\n",
152         [3] = KERN_WARNING "amikbd: keyboard controller failure\n",
153         [4] = KERN_ERR "amikbd: keyboard selftest failure\n",
154         [5] = KERN_INFO "amikbd: initiate power-up key stream\n",
155         [6] = KERN_INFO "amikbd: terminate power-up key stream\n",
156         [7] = KERN_WARNING "amikbd: keyboard interrupt\n"
157 };
158 
159 static struct input_dev *amikbd_dev;
160 
161 static irqreturn_t amikbd_interrupt(int irq, void *dummy)
162 {
163         unsigned char scancode, down;
164 
165         scancode = ~ciaa.sdr;           /* get and invert scancode (keyboard is active low) */
166         ciaa.cra |= 0x40;               /* switch SP pin to output for handshake */
167         udelay(85);                     /* wait until 85 us have expired */
168         ciaa.cra &= ~0x40;              /* switch CIA serial port to input mode */
169 
170         down = !(scancode & 1);         /* lowest bit is release bit */
171         scancode >>= 1;
172 
173         if (scancode < 0x78) {          /* scancodes < 0x78 are keys */
174                 if (scancode == 98) {   /* CapsLock is a toggle switch key on Amiga */
175                         input_report_key(amikbd_dev, scancode, 1);
176                         input_report_key(amikbd_dev, scancode, 0);
177                 } else {
178                         input_report_key(amikbd_dev, scancode, down);
179                 }
180 
181                 input_sync(amikbd_dev);
182         } else                          /* scancodes >= 0x78 are error codes */
183                 printk(amikbd_messages[scancode - 0x78]);
184 
185         return IRQ_HANDLED;
186 }
187 
188 static int __init amikbd_init(void)
189 {
190         int i, j, err;
191 
192         if (!AMIGAHW_PRESENT(AMI_KEYBOARD))
193                 return -ENODEV;
194 
195         if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))
196                 return -EBUSY;
197 
198         amikbd_dev = input_allocate_device();
199         if (!amikbd_dev) {
200                 printk(KERN_ERR "amikbd: not enough memory for input device\n");
201                 err = -ENOMEM;
202                 goto fail1;
203         }
204 
205         amikbd_dev->name = "Amiga Keyboard";
206         amikbd_dev->phys = "amikbd/input0";
207         amikbd_dev->id.bustype = BUS_AMIGA;
208         amikbd_dev->id.vendor = 0x0001;
209         amikbd_dev->id.product = 0x0001;
210         amikbd_dev->id.version = 0x0100;
211 
212         amikbd_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
213 
214         for (i = 0; i < 0x78; i++)
215                 set_bit(i, amikbd_dev->keybit);
216 
217         for (i = 0; i < MAX_NR_KEYMAPS; i++) {
218                 static u_short temp_map[NR_KEYS] __initdata;
219                 if (!key_maps[i])
220                         continue;
221                 memset(temp_map, 0, sizeof(temp_map));
222                 for (j = 0; j < 0x78; j++) {
223                         if (!amikbd_keycode[j])
224                                 continue;
225                         temp_map[j] = key_maps[i][amikbd_keycode[j]];
226                 }
227                 for (j = 0; j < NR_KEYS; j++) {
228                         if (!temp_map[j])
229                                 temp_map[j] = 0xf200;
230                 }
231                 memcpy(key_maps[i], temp_map, sizeof(temp_map));
232         }
233         ciaa.cra &= ~0x41;       /* serial data in, turn off TA */
234         if (request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
235                         amikbd_interrupt)) {
236                 err = -EBUSY;
237                 goto fail2;
238         }
239 
240         err = input_register_device(amikbd_dev);
241         if (err)
242                 goto fail3;
243 
244         return 0;
245 
246  fail3: free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
247  fail2: input_free_device(amikbd_dev);
248  fail1: release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
249         return err;
250 }
251 
252 static void __exit amikbd_exit(void)
253 {
254         free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
255         input_unregister_device(amikbd_dev);
256         release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
257 }
258 
259 module_init(amikbd_init);
260 module_exit(amikbd_exit);
261 
  This page was automatically generated by the LXR engine.