Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * sbp2.h - Defines and prototypes for sbp2.c
  3  *
  4  * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com)
  5  * jamesg@filanet.com
  6  *
  7  * This program is free software; you can redistribute it and/or modify
  8  * it under the terms of the GNU General Public License as published by
  9  * the Free Software Foundation; either version 2 of the License, or
 10  * (at your option) any later version.
 11  *
 12  * This program is distributed in the hope that it will be useful,
 13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 15  * GNU General Public License for more details.
 16  *
 17  * You should have received a copy of the GNU General Public License
 18  * along with this program; if not, write to the Free Software Foundation,
 19  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 20  */
 21 
 22 #ifndef SBP2_H
 23 #define SBP2_H
 24 
 25 #define SBP2_DEVICE_NAME                "sbp2"
 26 
 27 /*
 28  * SBP-2 specific definitions
 29  */
 30 
 31 #define ORB_DIRECTION_WRITE_TO_MEDIA    0x0
 32 #define ORB_DIRECTION_READ_FROM_MEDIA   0x1
 33 #define ORB_DIRECTION_NO_DATA_TRANSFER  0x2
 34 
 35 #define ORB_SET_NULL_PTR(v)             (((v) & 0x1) << 31)
 36 #define ORB_SET_NOTIFY(v)               (((v) & 0x1) << 31)
 37 #define ORB_SET_RQ_FMT(v)               (((v) & 0x3) << 29)
 38 #define ORB_SET_NODE_ID(v)              (((v) & 0xffff) << 16)
 39 #define ORB_SET_STATUS_FIFO_HI(v, id)   ((v) >> 32 | ORB_SET_NODE_ID(id))
 40 #define ORB_SET_STATUS_FIFO_LO(v)       ((v) & 0xffffffff)
 41 #define ORB_SET_DATA_SIZE(v)            ((v) & 0xffff)
 42 #define ORB_SET_PAGE_SIZE(v)            (((v) & 0x7) << 16)
 43 #define ORB_SET_PAGE_TABLE_PRESENT(v)   (((v) & 0x1) << 19)
 44 #define ORB_SET_MAX_PAYLOAD(v)          (((v) & 0xf) << 20)
 45 #define ORB_SET_SPEED(v)                (((v) & 0x7) << 24)
 46 #define ORB_SET_DIRECTION(v)            (((v) & 0x1) << 27)
 47 
 48 struct sbp2_command_orb {
 49         u32 next_ORB_hi;
 50         u32 next_ORB_lo;
 51         u32 data_descriptor_hi;
 52         u32 data_descriptor_lo;
 53         u32 misc;
 54         u8 cdb[12];
 55 } __attribute__((packed));
 56 
 57 #define SBP2_LOGIN_REQUEST              0x0
 58 #define SBP2_QUERY_LOGINS_REQUEST       0x1
 59 #define SBP2_RECONNECT_REQUEST          0x3
 60 #define SBP2_SET_PASSWORD_REQUEST       0x4
 61 #define SBP2_LOGOUT_REQUEST             0x7
 62 #define SBP2_ABORT_TASK_REQUEST         0xb
 63 #define SBP2_ABORT_TASK_SET             0xc
 64 #define SBP2_LOGICAL_UNIT_RESET         0xe
 65 #define SBP2_TARGET_RESET_REQUEST       0xf
 66 
 67 #define ORB_SET_LUN(v)                  ((v) & 0xffff)
 68 #define ORB_SET_FUNCTION(v)             (((v) & 0xf) << 16)
 69 #define ORB_SET_RECONNECT(v)            (((v) & 0xf) << 20)
 70 #define ORB_SET_EXCLUSIVE(v)            ((v) ? 1 << 28 : 0)
 71 #define ORB_SET_LOGIN_RESP_LENGTH(v)    ((v) & 0xffff)
 72 #define ORB_SET_PASSWD_LENGTH(v)        (((v) & 0xffff) << 16)
 73 
 74 struct sbp2_login_orb {
 75         u32 password_hi;
 76         u32 password_lo;
 77         u32 login_response_hi;
 78         u32 login_response_lo;
 79         u32 lun_misc;
 80         u32 passwd_resp_lengths;
 81         u32 status_fifo_hi;
 82         u32 status_fifo_lo;
 83 } __attribute__((packed));
 84 
 85 #define RESPONSE_GET_LOGIN_ID(v)        ((v) & 0xffff)
 86 #define RESPONSE_GET_LENGTH(v)          (((v) >> 16) & 0xffff)
 87 #define RESPONSE_GET_RECONNECT_HOLD(v)  ((v) & 0xffff)
 88 
 89 struct sbp2_login_response {
 90         u32 length_login_ID;
 91         u32 command_block_agent_hi;
 92         u32 command_block_agent_lo;
 93         u32 reconnect_hold;
 94 } __attribute__((packed));
 95 
 96 #define ORB_SET_LOGIN_ID(v)                 ((v) & 0xffff)
 97 #define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff)
 98 
 99 struct sbp2_query_logins_orb {
100         u32 reserved1;
101         u32 reserved2;
102         u32 query_response_hi;
103         u32 query_response_lo;
104         u32 lun_misc;
105         u32 reserved_resp_length;
106         u32 status_fifo_hi;
107         u32 status_fifo_lo;
108 } __attribute__((packed));
109 
110 #define RESPONSE_GET_MAX_LOGINS(v)      ((v) & 0xffff)
111 #define RESPONSE_GET_ACTIVE_LOGINS(v)   ((RESPONSE_GET_LENGTH((v)) - 4) / 12)
112 
113 struct sbp2_query_logins_response {
114         u32 length_max_logins;
115         u32 misc_IDs;
116         u32 initiator_misc_hi;
117         u32 initiator_misc_lo;
118 } __attribute__((packed));
119 
120 struct sbp2_reconnect_orb {
121         u32 reserved1;
122         u32 reserved2;
123         u32 reserved3;
124         u32 reserved4;
125         u32 login_ID_misc;
126         u32 reserved5;
127         u32 status_fifo_hi;
128         u32 status_fifo_lo;
129 } __attribute__((packed));
130 
131 struct sbp2_logout_orb {
132         u32 reserved1;
133         u32 reserved2;
134         u32 reserved3;
135         u32 reserved4;
136         u32 login_ID_misc;
137         u32 reserved5;
138         u32 status_fifo_hi;
139         u32 status_fifo_lo;
140 } __attribute__((packed));
141 
142 #define PAGE_TABLE_SET_SEGMENT_BASE_HI(v)       ((v) & 0xffff)
143 #define PAGE_TABLE_SET_SEGMENT_LENGTH(v)        (((v) & 0xffff) << 16)
144 
145 struct sbp2_unrestricted_page_table {
146         u32 length_segment_base_hi;
147         u32 segment_base_lo;
148 } __attribute__((packed));
149 
150 #define RESP_STATUS_REQUEST_COMPLETE            0x0
151 #define RESP_STATUS_TRANSPORT_FAILURE           0x1
152 #define RESP_STATUS_ILLEGAL_REQUEST             0x2
153 #define RESP_STATUS_VENDOR_DEPENDENT            0x3
154 
155 #define SBP2_STATUS_NO_ADDITIONAL_INFO          0x0
156 #define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED      0x1
157 #define SBP2_STATUS_SPEED_NOT_SUPPORTED         0x2
158 #define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED     0x3
159 #define SBP2_STATUS_ACCESS_DENIED               0x4
160 #define SBP2_STATUS_LU_NOT_SUPPORTED            0x5
161 #define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL       0x6
162 #define SBP2_STATUS_RESOURCES_UNAVAILABLE       0x8
163 #define SBP2_STATUS_FUNCTION_REJECTED           0x9
164 #define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED     0xa
165 #define SBP2_STATUS_DUMMY_ORB_COMPLETED         0xb
166 #define SBP2_STATUS_REQUEST_ABORTED             0xc
167 #define SBP2_STATUS_UNSPECIFIED_ERROR           0xff
168 
169 #define SFMT_CURRENT_ERROR                      0x0
170 #define SFMT_DEFERRED_ERROR                     0x1
171 #define SFMT_VENDOR_DEPENDENT_STATUS            0x3
172 
173 #define STATUS_GET_SRC(v)                       (((v) >> 30) & 0x3)
174 #define STATUS_GET_RESP(v)                      (((v) >> 28) & 0x3)
175 #define STATUS_GET_LEN(v)                       (((v) >> 24) & 0x7)
176 #define STATUS_GET_SBP_STATUS(v)                (((v) >> 16) & 0xff)
177 #define STATUS_GET_ORB_OFFSET_HI(v)             ((v) & 0x0000ffff)
178 #define STATUS_TEST_DEAD(v)                     ((v) & 0x08000000)
179 /* test 'resp' | 'dead' | 'sbp2_status' */
180 #define STATUS_TEST_RDS(v)                      ((v) & 0x38ff0000)
181 
182 struct sbp2_status_block {
183         u32 ORB_offset_hi_misc;
184         u32 ORB_offset_lo;
185         u8 command_set_dependent[24];
186 } __attribute__((packed));
187 
188 
189 /*
190  * SBP2 related configuration ROM definitions
191  */
192 
193 #define SBP2_UNIT_DIRECTORY_OFFSET_KEY          0xd1
194 #define SBP2_CSR_OFFSET_KEY                     0x54
195 #define SBP2_UNIT_SPEC_ID_KEY                   0x12
196 #define SBP2_UNIT_SW_VERSION_KEY                0x13
197 #define SBP2_COMMAND_SET_SPEC_ID_KEY            0x38
198 #define SBP2_COMMAND_SET_KEY                    0x39
199 #define SBP2_UNIT_CHARACTERISTICS_KEY           0x3a
200 #define SBP2_DEVICE_TYPE_AND_LUN_KEY            0x14
201 #define SBP2_FIRMWARE_REVISION_KEY              0x3c
202 
203 #define SBP2_AGENT_STATE_OFFSET                 0x00ULL
204 #define SBP2_AGENT_RESET_OFFSET                 0x04ULL
205 #define SBP2_ORB_POINTER_OFFSET                 0x08ULL
206 #define SBP2_DOORBELL_OFFSET                    0x10ULL
207 #define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET   0x14ULL
208 #define SBP2_UNSOLICITED_STATUS_VALUE           0xf
209 
210 #define SBP2_BUSY_TIMEOUT_ADDRESS               0xfffff0000210ULL
211 /* biggest possible value for Single Phase Retry count is 0xf */
212 #define SBP2_BUSY_TIMEOUT_VALUE                 0xf
213 
214 #define SBP2_AGENT_RESET_DATA                   0xf
215 
216 #define SBP2_UNIT_SPEC_ID_ENTRY                 0x0000609e
217 #define SBP2_SW_VERSION_ENTRY                   0x00010483
218 
219 
220 /*
221  * SCSI specific definitions
222  */
223 
224 #define SBP2_MAX_SG_ELEMENT_LENGTH              0xf000
225 /* There is no real limitation of the queue depth (i.e. length of the linked
226  * list of command ORBs) at the target. The chosen depth is merely an
227  * implementation detail of the sbp2 driver. */
228 #define SBP2_MAX_CMDS                           8
229 
230 #define SBP2_SCSI_STATUS_GOOD                   0x0
231 #define SBP2_SCSI_STATUS_CHECK_CONDITION        0x2
232 #define SBP2_SCSI_STATUS_CONDITION_MET          0x4
233 #define SBP2_SCSI_STATUS_BUSY                   0x8
234 #define SBP2_SCSI_STATUS_RESERVATION_CONFLICT   0x18
235 #define SBP2_SCSI_STATUS_COMMAND_TERMINATED     0x22
236 #define SBP2_SCSI_STATUS_SELECTION_TIMEOUT      0xff
237 
238 
239 /*
240  * Representations of commands and devices
241  */
242 
243 enum sbp2_dma_types {
244         CMD_DMA_NONE,
245         CMD_DMA_PAGE,
246         CMD_DMA_SINGLE
247 };
248 
249 /* Per SCSI command */
250 struct sbp2_command_info {
251         struct list_head list;
252         struct sbp2_command_orb command_orb;
253         dma_addr_t command_orb_dma;
254         struct scsi_cmnd *Current_SCpnt;
255         void (*Current_done)(struct scsi_cmnd *);
256 
257         /* Also need s/g structure for each sbp2 command */
258         struct sbp2_unrestricted_page_table
259                 scatter_gather_element[SG_ALL] __attribute__((aligned(8)));
260         dma_addr_t sge_dma;
261         void *sge_buffer;
262         dma_addr_t cmd_dma;
263         enum sbp2_dma_types dma_type;
264         unsigned long dma_size;
265         enum dma_data_direction dma_dir;
266 };
267 
268 /* Per FireWire host */
269 struct sbp2_fwhost_info {
270         struct hpsb_host *host;
271         struct list_head logical_units;
272 };
273 
274 /* Per logical unit */
275 struct sbp2_lu {
276         /* Operation request blocks */
277         struct sbp2_command_orb *last_orb;
278         dma_addr_t last_orb_dma;
279         struct sbp2_login_orb *login_orb;
280         dma_addr_t login_orb_dma;
281         struct sbp2_login_response *login_response;
282         dma_addr_t login_response_dma;
283         struct sbp2_query_logins_orb *query_logins_orb;
284         dma_addr_t query_logins_orb_dma;
285         struct sbp2_query_logins_response *query_logins_response;
286         dma_addr_t query_logins_response_dma;
287         struct sbp2_reconnect_orb *reconnect_orb;
288         dma_addr_t reconnect_orb_dma;
289         struct sbp2_logout_orb *logout_orb;
290         dma_addr_t logout_orb_dma;
291         struct sbp2_status_block status_block;
292 
293         /* How to talk to the unit */
294         u64 management_agent_addr;
295         u64 command_block_agent_addr;
296         u32 speed_code;
297         u32 max_payload_size;
298         u16 lun;
299 
300         /* Address for the unit to write status blocks to */
301         u64 status_fifo_addr;
302 
303         /* Waitqueue flag for logins, reconnects, logouts, query logins */
304         unsigned int access_complete:1;
305 
306         /* Pool of command ORBs for this logical unit */
307         spinlock_t cmd_orb_lock;
308         struct list_head cmd_orb_inuse;
309         struct list_head cmd_orb_completed;
310 
311         /* Backlink to FireWire host; list of units attached to the host */
312         struct sbp2_fwhost_info *hi;
313         struct list_head lu_list;
314 
315         /* IEEE 1394 core's device representations */
316         struct node_entry *ne;
317         struct unit_directory *ud;
318 
319         /* SCSI core's device representations */
320         struct scsi_device *sdev;
321         struct Scsi_Host *shost;
322 
323         /* Device specific workarounds/brokeness */
324         unsigned workarounds;
325 
326         /* Connection state */
327         atomic_t state;
328 
329         /* For deferred requests to the fetch agent */
330         struct work_struct protocol_work;
331 };
332 
333 /* For use in sbp2_lu.state */
334 enum sbp2lu_state_types {
335         SBP2LU_STATE_RUNNING,           /* all normal */
336         SBP2LU_STATE_IN_RESET,          /* between bus reset and reconnect */
337         SBP2LU_STATE_IN_SHUTDOWN        /* when sbp2_remove was called */
338 };
339 
340 /* For use in sbp2_lu.workarounds and in the corresponding
341  * module load parameter */
342 #define SBP2_WORKAROUND_128K_MAX_TRANS  0x1
343 #define SBP2_WORKAROUND_INQUIRY_36      0x2
344 #define SBP2_WORKAROUND_MODE_SENSE_8    0x4
345 #define SBP2_WORKAROUND_FIX_CAPACITY    0x8
346 #define SBP2_WORKAROUND_DELAY_INQUIRY   0x10
347 #define SBP2_INQUIRY_DELAY              12
348 #define SBP2_WORKAROUND_OVERRIDE        0x100
349 
350 #endif /* SBP2_H */
351 
  This page was automatically generated by the LXR engine.