1 /* fschmd.c
2 *
3 * Copyright (C) 2007 - 2009 Hans de Goede <hdegoede@redhat.com>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 */
19
20 /*
21 * Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes,
22 * Scylla, Heracles, Heimdall, Hades and Syleus chips
23 *
24 * Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6
25 * (candidate) fschmd drivers:
26 * Copyright (C) 2006 Thilo Cestonaro
27 * <thilo.cestonaro.external@fujitsu-siemens.com>
28 * Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
29 * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
30 * Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de>
31 * Copyright (C) 2000 Hermann Jung <hej@odn.de>
32 */
33
34 #include <linux/module.h>
35 #include <linux/init.h>
36 #include <linux/slab.h>
37 #include <linux/jiffies.h>
38 #include <linux/i2c.h>
39 #include <linux/hwmon.h>
40 #include <linux/hwmon-sysfs.h>
41 #include <linux/err.h>
42 #include <linux/mutex.h>
43 #include <linux/sysfs.h>
44 #include <linux/dmi.h>
45 #include <linux/fs.h>
46 #include <linux/watchdog.h>
47 #include <linux/miscdevice.h>
48 #include <linux/uaccess.h>
49 #include <linux/kref.h>
50
51 /* Addresses to scan */
52 static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
53
54 /* Insmod parameters */
55 static int nowayout = WATCHDOG_NOWAYOUT;
56 module_param(nowayout, int, 0);
57 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
58 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
59 I2C_CLIENT_INSMOD_7(fscpos, fscher, fscscy, fschrc, fschmd, fschds, fscsyl);
60
61 /*
62 * The FSCHMD registers and other defines
63 */
64
65 /* chip identification */
66 #define FSCHMD_REG_IDENT_0 0x00
67 #define FSCHMD_REG_IDENT_1 0x01
68 #define FSCHMD_REG_IDENT_2 0x02
69 #define FSCHMD_REG_REVISION 0x03
70
71 /* global control and status */
72 #define FSCHMD_REG_EVENT_STATE 0x04
73 #define FSCHMD_REG_CONTROL 0x05
74
75 #define FSCHMD_CONTROL_ALERT_LED 0x01
76
77 /* watchdog */
78 static const u8 FSCHMD_REG_WDOG_CONTROL[7] =
79 { 0x21, 0x21, 0x21, 0x21, 0x21, 0x28, 0x28 };
80 static const u8 FSCHMD_REG_WDOG_STATE[7] =
81 { 0x23, 0x23, 0x23, 0x23, 0x23, 0x29, 0x29 };
82 static const u8 FSCHMD_REG_WDOG_PRESET[7] =
83 { 0x28, 0x28, 0x28, 0x28, 0x28, 0x2a, 0x2a };
84
85 #define FSCHMD_WDOG_CONTROL_TRIGGER 0x10
86 #define FSCHMD_WDOG_CONTROL_STARTED 0x10 /* the same as trigger */
87 #define FSCHMD_WDOG_CONTROL_STOP 0x20
88 #define FSCHMD_WDOG_CONTROL_RESOLUTION 0x40
89
90 #define FSCHMD_WDOG_STATE_CARDRESET 0x02
91
92 /* voltages, weird order is to keep the same order as the old drivers */
93 static const u8 FSCHMD_REG_VOLT[7][6] = {
94 { 0x45, 0x42, 0x48 }, /* pos */
95 { 0x45, 0x42, 0x48 }, /* her */
96 { 0x45, 0x42, 0x48 }, /* scy */
97 { 0x45, 0x42, 0x48 }, /* hrc */
98 { 0x45, 0x42, 0x48 }, /* hmd */
99 { 0x21, 0x20, 0x22 }, /* hds */
100 { 0x21, 0x20, 0x22, 0x23, 0x24, 0x25 }, /* syl */
101 };
102
103 static const int FSCHMD_NO_VOLT_SENSORS[7] = { 3, 3, 3, 3, 3, 3, 6 };
104
105 /* minimum pwm at which the fan is driven (pwm can by increased depending on
106 the temp. Notice that for the scy some fans share there minimum speed.
107 Also notice that with the scy the sensor order is different than with the
108 other chips, this order was in the 2.4 driver and kept for consistency. */
109 static const u8 FSCHMD_REG_FAN_MIN[7][7] = {
110 { 0x55, 0x65 }, /* pos */
111 { 0x55, 0x65, 0xb5 }, /* her */
112 { 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 }, /* scy */
113 { 0x55, 0x65, 0xa5, 0xb5 }, /* hrc */
114 { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hmd */
115 { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hds */
116 { 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb4 }, /* syl */
117 };
118
119 /* actual fan speed */
120 static const u8 FSCHMD_REG_FAN_ACT[7][7] = {
121 { 0x0e, 0x6b, 0xab }, /* pos */
122 { 0x0e, 0x6b, 0xbb }, /* her */
123 { 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb }, /* scy */
124 { 0x0e, 0x6b, 0xab, 0xbb }, /* hrc */
125 { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hmd */
126 { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hds */
127 { 0x57, 0x67, 0x77, 0x87, 0x97, 0xa7, 0xb7 }, /* syl */
128 };
129
130 /* fan status registers */
131 static const u8 FSCHMD_REG_FAN_STATE[7][7] = {
132 { 0x0d, 0x62, 0xa2 }, /* pos */
133 { 0x0d, 0x62, 0xb2 }, /* her */
134 { 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 }, /* scy */
135 { 0x0d, 0x62, 0xa2, 0xb2 }, /* hrc */
136 { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hmd */
137 { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hds */
138 { 0x50, 0x60, 0x70, 0x80, 0x90, 0xa0, 0xb0 }, /* syl */
139 };
140
141 /* fan ripple / divider registers */
142 static const u8 FSCHMD_REG_FAN_RIPPLE[7][7] = {
143 { 0x0f, 0x6f, 0xaf }, /* pos */
144 { 0x0f, 0x6f, 0xbf }, /* her */
145 { 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf }, /* scy */
146 { 0x0f, 0x6f, 0xaf, 0xbf }, /* hrc */
147 { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hmd */
148 { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hds */
149 { 0x56, 0x66, 0x76, 0x86, 0x96, 0xa6, 0xb6 }, /* syl */
150 };
151
152 static const int FSCHMD_NO_FAN_SENSORS[7] = { 3, 3, 6, 4, 5, 5, 7 };
153
154 /* Fan status register bitmasks */
155 #define FSCHMD_FAN_ALARM 0x04 /* called fault by FSC! */
156 #define FSCHMD_FAN_NOT_PRESENT 0x08
157 #define FSCHMD_FAN_DISABLED 0x80
158
159
160 /* actual temperature registers */
161 static const u8 FSCHMD_REG_TEMP_ACT[7][11] = {
162 { 0x64, 0x32, 0x35 }, /* pos */
163 { 0x64, 0x32, 0x35 }, /* her */
164 { 0x64, 0xD0, 0x32, 0x35 }, /* scy */
165 { 0x64, 0x32, 0x35 }, /* hrc */
166 { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hmd */
167 { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hds */
168 { 0x58, 0x68, 0x78, 0x88, 0x98, 0xa8, /* syl */
169 0xb8, 0xc8, 0xd8, 0xe8, 0xf8 },
170 };
171
172 /* temperature state registers */
173 static const u8 FSCHMD_REG_TEMP_STATE[7][11] = {
174 { 0x71, 0x81, 0x91 }, /* pos */
175 { 0x71, 0x81, 0x91 }, /* her */
176 { 0x71, 0xd1, 0x81, 0x91 }, /* scy */
177 { 0x71, 0x81, 0x91 }, /* hrc */
178 { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hmd */
179 { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hds */
180 { 0x59, 0x69, 0x79, 0x89, 0x99, 0xa9, /* syl */
181 0xb9, 0xc9, 0xd9, 0xe9, 0xf9 },
182 };
183
184 /* temperature high limit registers, FSC does not document these. Proven to be
185 there with field testing on the fscher and fschrc, already supported / used
186 in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers
187 at these addresses, but doesn't want to confirm they are the same as with
188 the fscher?? */
189 static const u8 FSCHMD_REG_TEMP_LIMIT[7][11] = {
190 { 0, 0, 0 }, /* pos */
191 { 0x76, 0x86, 0x96 }, /* her */
192 { 0x76, 0xd6, 0x86, 0x96 }, /* scy */
193 { 0x76, 0x86, 0x96 }, /* hrc */
194 { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hmd */
195 { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hds */
196 { 0x5a, 0x6a, 0x7a, 0x8a, 0x9a, 0xaa, /* syl */
197 0xba, 0xca, 0xda, 0xea, 0xfa },
198 };
199
200 /* These were found through experimenting with an fscher, currently they are
201 not used, but we keep them around for future reference.
202 On the fscsyl AUTOP1 lives at 0x#c (so 0x5c for fan1, 0x6c for fan2, etc),
203 AUTOP2 lives at 0x#e, and 0x#1 is a bitmask defining which temps influence
204 the fan speed.
205 static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 };
206 static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; */
207
208 static const int FSCHMD_NO_TEMP_SENSORS[7] = { 3, 3, 4, 3, 5, 5, 11 };
209
210 /* temp status register bitmasks */
211 #define FSCHMD_TEMP_WORKING 0x01
212 #define FSCHMD_TEMP_ALERT 0x02
213 #define FSCHMD_TEMP_DISABLED 0x80
214 /* there only really is an alarm if the sensor is working and alert == 1 */
215 #define FSCHMD_TEMP_ALARM_MASK \
216 (FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT)
217
218 /*
219 * Functions declarations
220 */
221
222 static int fschmd_probe(struct i2c_client *client,
223 const struct i2c_device_id *id);
224 static int fschmd_detect(struct i2c_client *client, int kind,
225 struct i2c_board_info *info);
226 static int fschmd_remove(struct i2c_client *client);
227 static struct fschmd_data *fschmd_update_device(struct device *dev);
228
229 /*
230 * Driver data (common to all clients)
231 */
232
233 static const struct i2c_device_id fschmd_id[] = {
234 { "fscpos", fscpos },
235 { "fscher", fscher },
236 { "fscscy", fscscy },
237 { "fschrc", fschrc },
238 { "fschmd", fschmd },
239 { "fschds", fschds },
240 { "fscsyl", fscsyl },
241 { }
242 };
243 MODULE_DEVICE_TABLE(i2c, fschmd_id);
244
245 static struct i2c_driver fschmd_driver = {
246 .class = I2C_CLASS_HWMON,
247 .driver = {
248 .name = "fschmd",
249 },
250 .probe = fschmd_probe,
251 .remove = fschmd_remove,
252 .id_table = fschmd_id,
253 .detect = fschmd_detect,
254 .address_data = &addr_data,
255 };
256
257 /*
258 * Client data (each client gets its own)
259 */
260
261 struct fschmd_data {
262 struct i2c_client *client;
263 struct device *hwmon_dev;
264 struct mutex update_lock;
265 struct mutex watchdog_lock;
266 struct list_head list; /* member of the watchdog_data_list */
267 struct kref kref;
268 struct miscdevice watchdog_miscdev;
269 int kind;
270 unsigned long watchdog_is_open;
271 char watchdog_expect_close;
272 char watchdog_name[10]; /* must be unique to avoid sysfs conflict */
273 char valid; /* zero until following fields are valid */
274 unsigned long last_updated; /* in jiffies */
275
276 /* register values */
277 u8 revision; /* chip revision */
278 u8 global_control; /* global control register */
279 u8 watchdog_control; /* watchdog control register */
280 u8 watchdog_state; /* watchdog status register */
281 u8 watchdog_preset; /* watchdog counter preset on trigger val */
282 u8 volt[6]; /* voltage */
283 u8 temp_act[11]; /* temperature */
284 u8 temp_status[11]; /* status of sensor */
285 u8 temp_max[11]; /* high temp limit, notice: undocumented! */
286 u8 fan_act[7]; /* fans revolutions per second */
287 u8 fan_status[7]; /* fan status */
288 u8 fan_min[7]; /* fan min value for rps */
289 u8 fan_ripple[7]; /* divider for rps */
290 };
291
292 /* Global variables to hold information read from special DMI tables, which are
293 available on FSC machines with an fscher or later chip. There is no need to
294 protect these with a lock as they are only modified from our attach function
295 which always gets called with the i2c-core lock held and never accessed
296 before the attach function is done with them. */
297 static int dmi_mult[6] = { 490, 200, 100, 100, 200, 100 };
298 static int dmi_offset[6] = { 0, 0, 0, 0, 0, 0 };
299 static int dmi_vref = -1;
300
301 /* Somewhat ugly :( global data pointer list with all fschmd devices, so that
302 we can find our device data as when using misc_register there is no other
303 method to get to ones device data from the open fop. */
304 static LIST_HEAD(watchdog_data_list);
305 /* Note this lock not only protect list access, but also data.kref access */
306 static DEFINE_MUTEX(watchdog_data_mutex);
307
308 /* Release our data struct when we're detached from the i2c client *and* all
309 references to our watchdog device are released */
310 static void fschmd_release_resources(struct kref *ref)
311 {
312 struct fschmd_data *data = container_of(ref, struct fschmd_data, kref);
313 kfree(data);
314 }
315
316 /*
317 * Sysfs attr show / store functions
318 */
319
320 static ssize_t show_in_value(struct device *dev,
321 struct device_attribute *devattr, char *buf)
322 {
323 const int max_reading[3] = { 14200, 6600, 3300 };
324 int index = to_sensor_dev_attr(devattr)->index;
325 struct fschmd_data *data = fschmd_update_device(dev);
326
327 /* fscher / fschrc - 1 as data->kind is an array index, not a chips */
328 if (data->kind == (fscher - 1) || data->kind >= (fschrc - 1))
329 return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref *
330 dmi_mult[index]) / 255 + dmi_offset[index]);
331 else
332 return sprintf(buf, "%d\n", (data->volt[index] *
333 max_reading[index] + 128) / 255);
334 }
335
336
337 #define TEMP_FROM_REG(val) (((val) - 128) * 1000)
338
339 static ssize_t show_temp_value(struct device *dev,
340 struct device_attribute *devattr, char *buf)
341 {
342 int index = to_sensor_dev_attr(devattr)->index;
343 struct fschmd_data *data = fschmd_update_device(dev);
344
345 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index]));
346 }
347
348 static ssize_t show_temp_max(struct device *dev,
349 struct device_attribute *devattr, char *buf)
350 {
351 int index = to_sensor_dev_attr(devattr)->index;
352 struct fschmd_data *data = fschmd_update_device(dev);
353
354 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index]));
355 }
356
357 static ssize_t store_temp_max(struct device *dev, struct device_attribute
358 *devattr, const char *buf, size_t count)
359 {
360 int index = to_sensor_dev_attr(devattr)->index;
361 struct fschmd_data *data = dev_get_drvdata(dev);
362 long v = simple_strtol(buf, NULL, 10) / 1000;
363
364 v = SENSORS_LIMIT(v, -128, 127) + 128;
365
366 mutex_lock(&data->update_lock);
367 i2c_smbus_write_byte_data(to_i2c_client(dev),
368 FSCHMD_REG_TEMP_LIMIT[data->kind][index], v);
369 data->temp_max[index] = v;
370 mutex_unlock(&data->update_lock);
371
372 return count;
373 }
374
375 static ssize_t show_temp_fault(struct device *dev,
376 struct device_attribute *devattr, char *buf)
377 {
378 int index = to_sensor_dev_attr(devattr)->index;
379 struct fschmd_data *data = fschmd_update_device(dev);
380
381 /* bit 0 set means sensor working ok, so no fault! */
382 if (data->temp_status[index] & FSCHMD_TEMP_WORKING)
383 return sprintf(buf, "\n");
384 else
385 return sprintf(buf, "1\n");
386 }
387
388 static ssize_t show_temp_alarm(struct device *dev,
389 struct device_attribute *devattr, char *buf)
390 {
391 int index = to_sensor_dev_attr(devattr)->index;
392 struct fschmd_data *data = fschmd_update_device(dev);
393
394 if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) ==
395 FSCHMD_TEMP_ALARM_MASK)
396 return sprintf(buf, "1\n");
397 else
398 return sprintf(buf, "\n");
399 }
400
401
402 #define RPM_FROM_REG(val) ((val) * 60)
403
404 static ssize_t show_fan_value(struct device *dev,
405 struct device_attribute *devattr, char *buf)
406 {
407 int index = to_sensor_dev_attr(devattr)->index;
408 struct fschmd_data *data = fschmd_update_device(dev);
409
410 return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index]));
411 }
412
413 static ssize_t show_fan_div(struct device *dev,
414 struct device_attribute *devattr, char *buf)
415 {
416 int index = to_sensor_dev_attr(devattr)->index;
417 struct fschmd_data *data = fschmd_update_device(dev);
418
419 /* bits 2..7 reserved => mask with 3 */
420 return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3));
421 }
422
423 static ssize_t store_fan_div(struct device *dev, struct device_attribute
424 *devattr, const char *buf, size_t count)
425 {
426 u8 reg;
427 int index = to_sensor_dev_attr(devattr)->index;
428 struct fschmd_data *data = dev_get_drvdata(dev);
429 /* supported values: 2, 4, 8 */
430 unsigned long v = simple_strtoul(buf, NULL, 10);
431
432 switch (v) {
433 case 2: v = 1; break;
434 case 4: v = 2; break;
435 case 8: v = 3; break;
436 default:
437 dev_err(dev, "fan_div value %lu not supported. "
438 "Choose one of 2, 4 or 8!\n", v);
439 return -EINVAL;
440 }
441
442 mutex_lock(&data->update_lock);
443
444 reg = i2c_smbus_read_byte_data(to_i2c_client(dev),
445 FSCHMD_REG_FAN_RIPPLE[data->kind][index]);
446
447 /* bits 2..7 reserved => mask with 0x03 */
448 reg &= ~0x03;
449 reg |= v;
450
451 i2c_smbus_write_byte_data(to_i2c_client(dev),
452 FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg);
453
454 data->fan_ripple[index] = reg;
455
456 mutex_unlock(&data->update_lock);
457
458 return count;
459 }
460
461 static ssize_t show_fan_alarm(struct device *dev,
462 struct device_attribute *devattr, char *buf)
463 {
464 int index = to_sensor_dev_attr(devattr)->index;
465 struct fschmd_data *data = fschmd_update_device(dev);
466
467 if (data->fan_status[index] & FSCHMD_FAN_ALARM)
468 return sprintf(buf, "1\n");
469 else
470 return sprintf(buf, "\n");
471 }
472
473 static ssize_t show_fan_fault(struct device *dev,
474 struct device_attribute *devattr, char *buf)
475 {
476 int index = to_sensor_dev_attr(devattr)->index;
477 struct fschmd_data *data = fschmd_update_device(dev);
478
479 if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT)
480 return sprintf(buf, "1\n");
481 else
482 return sprintf(buf, "\n");
483 }
484
485
486 static ssize_t show_pwm_auto_point1_pwm(struct device *dev,
487 struct device_attribute *devattr, char *buf)
488 {
489 int index = to_sensor_dev_attr(devattr)->index;
490 struct fschmd_data *data = fschmd_update_device(dev);
491 int val = data->fan_min[index];
492
493 /* 0 = allow turning off (except on the syl), 1-255 = 50-100% */
494 if (val || data->kind == fscsyl - 1)
495 val = val / 2 + 128;
496
497 return sprintf(buf, "%d\n", val);
498 }
499
500 static ssize_t store_pwm_auto_point1_pwm(struct device *dev,
501 struct device_attribute *devattr, const char *buf, size_t count)
502 {
503 int index = to_sensor_dev_attr(devattr)->index;
504 struct fschmd_data *data = dev_get_drvdata(dev);
505 unsigned long v = simple_strtoul(buf, NULL, 10);
506
507 /* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */
508 if (v || data->kind == fscsyl - 1) {
509 v = SENSORS_LIMIT(v, 128, 255);
510 v = (v - 128) * 2 + 1;
511 }
512
513 mutex_lock(&data->update_lock);
514
515 i2c_smbus_write_byte_data(to_i2c_client(dev),
516 FSCHMD_REG_FAN_MIN[data->kind][index], v);
517 data->fan_min[index] = v;
518
519 mutex_unlock(&data->update_lock);
520
521 return count;
522 }
523
524
525 /* The FSC hwmon family has the ability to force an attached alert led to flash
526 from software, we export this as an alert_led sysfs attr */
527 static ssize_t show_alert_led(struct device *dev,
528 struct device_attribute *devattr, char *buf)
529 {
530 struct fschmd_data *data = fschmd_update_device(dev);
531
532 if (data->global_control & FSCHMD_CONTROL_ALERT_LED)
533 return sprintf(buf, "1\n");
534 else
535 return sprintf(buf, "\n");
536 }
537
538 static ssize_t store_alert_led(struct device *dev,
539 struct device_attribute *devattr, const char *buf, size_t count)
540 {
541 u8 reg;
542 struct fschmd_data *data = dev_get_drvdata(dev);
543 unsigned long v = simple_strtoul(buf, NULL, 10);
544
545 mutex_lock(&data->update_lock);
546
547 reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL);
548
549 if (v)
550 reg |= FSCHMD_CONTROL_ALERT_LED;
551 else
552 reg &= ~FSCHMD_CONTROL_ALERT_LED;
553
554 i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg);
555
556 data->global_control = reg;
557
558 mutex_unlock(&data->update_lock);
559
560 return count;
561 }
562
563 static DEVICE_ATTR(alert_led, 0644, show_alert_led, store_alert_led);
564
565 static struct sensor_device_attribute fschmd_attr[] = {
566 SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0),
567 SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1),
568 SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2),
569 SENSOR_ATTR(in3_input, 0444, show_in_value, NULL, 3),
570 SENSOR_ATTR(in4_input, 0444, show_in_value, NULL, 4),
571 SENSOR_ATTR(in5_input, 0444, show_in_value, NULL, 5),
572 };
573
574 static struct sensor_device_attribute fschmd_temp_attr[] = {
575 SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
576 SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0),
577 SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0),
578 SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0),
579 SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
580 SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1),
581 SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1),
582 SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1),
583 SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2),
584 SENSOR_ATTR(temp3_max, 0644, show_temp_max, store_temp_max, 2),
585 SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2),
586 SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2),
587 SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3),
588 SENSOR_ATTR(temp4_max, 0644, show_temp_max, store_temp_max, 3),
589 SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3),
590 SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3),
591 SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4),
592 SENSOR_ATTR(temp5_max, 0644, show_temp_max, store_temp_max, 4),
593 SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4),
594 SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4),
595 SENSOR_ATTR(temp6_input, 0444, show_temp_value, NULL, 5),
596 SENSOR_ATTR(temp6_max, 0644, show_temp_max, store_temp_max, 5),
597 SENSOR_ATTR(temp6_fault, 0444, show_temp_fault, NULL, 5),
598 SENSOR_ATTR(temp6_alarm, 0444, show_temp_alarm, NULL, 5),
599 SENSOR_ATTR(temp7_input, 0444, show_temp_value, NULL, 6),
600 SENSOR_ATTR(temp7_max, 0644, show_temp_max, store_temp_max, 6),
601 SENSOR_ATTR(temp7_fault, 0444, show_temp_fault, NULL, 6),
602 SENSOR_ATTR(temp7_alarm, 0444, show_temp_alarm, NULL, 6),
603 SENSOR_ATTR(temp8_input, 0444, show_temp_value, NULL, 7),
604 SENSOR_ATTR(temp8_max, 0644, show_temp_max, store_temp_max, 7),
605 SENSOR_ATTR(temp8_fault, 0444, show_temp_fault, NULL, 7),
606 SENSOR_ATTR(temp8_alarm, 0444, show_temp_alarm, NULL, 7),
607 SENSOR_ATTR(temp9_input, 0444, show_temp_value, NULL, 8),
608 SENSOR_ATTR(temp9_max, 0644, show_temp_max, store_temp_max, 8),
609 SENSOR_ATTR(temp9_fault, 0444, show_temp_fault, NULL, 8),
610 SENSOR_ATTR(temp9_alarm, 0444, show_temp_alarm, NULL, 8),
611 SENSOR_ATTR(temp10_input, 0444, show_temp_value, NULL, 9),
612 SENSOR_ATTR(temp10_max, 0644, show_temp_max, store_temp_max, 9),
613 SENSOR_ATTR(temp10_fault, 0444, show_temp_fault, NULL, 9),
614 SENSOR_ATTR(temp10_alarm, 0444, show_temp_alarm, NULL, 9),
615 SENSOR_ATTR(temp11_input, 0444, show_temp_value, NULL, 10),
616 SENSOR_ATTR(temp11_max, 0644, show_temp_max, store_temp_max, 10),
617 SENSOR_ATTR(temp11_fault, 0444, show_temp_fault, NULL, 10),
618 SENSOR_ATTR(temp11_alarm, 0444, show_temp_alarm, NULL, 10),
619 };
620
621 static struct sensor_device_attribute fschmd_fan_attr[] = {
622 SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0),
623 SENSOR_ATTR(fan1_div, 0644, show_fan_div, store_fan_div, 0),
624 SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0),
625 SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0),
626 SENSOR_ATTR(pwm1_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
627 store_pwm_auto_point1_pwm, 0),
628 SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1),
629 SENSOR_ATTR(fan2_div, 0644, show_fan_div, store_fan_div, 1),
630 SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1),
631 SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1),
632 SENSOR_ATTR(pwm2_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
633 store_pwm_auto_point1_pwm, 1),
634 SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2),
635 SENSOR_ATTR(fan3_div, 0644, show_fan_div, store_fan_div, 2),
636 SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2),
637 SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2),
638 SENSOR_ATTR(pwm3_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
639 store_pwm_auto_point1_pwm, 2),
640 SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3),
641 SENSOR_ATTR(fan4_div, 0644, show_fan_div, store_fan_div, 3),
642 SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3),
643 SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3),
644 SENSOR_ATTR(pwm4_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
645 store_pwm_auto_point1_pwm, 3),
646 SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4),
647 SENSOR_ATTR(fan5_div, 0644, show_fan_div, store_fan_div, 4),
648 SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4),
649 SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4),
650 SENSOR_ATTR(pwm5_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
651 store_pwm_auto_point1_pwm, 4),
652 SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5),
653 SENSOR_ATTR(fan6_div, 0644, show_fan_div, store_fan_div, 5),
654 SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5),
655 SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5),
656 SENSOR_ATTR(pwm6_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
657 store_pwm_auto_point1_pwm, 5),
658 SENSOR_ATTR(fan7_input, 0444, show_fan_value, NULL, 6),
659 SENSOR_ATTR(fan7_div, 0644, show_fan_div, store_fan_div, 6),
660 SENSOR_ATTR(fan7_alarm, 0444, show_fan_alarm, NULL, 6),
661 SENSOR_ATTR(fan7_fault, 0444, show_fan_fault, NULL, 6),
662 SENSOR_ATTR(pwm7_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
663 store_pwm_auto_point1_pwm, 6),
664 };
665
666
667 /*
668 * Watchdog routines
669 */
670
671 static int watchdog_set_timeout(struct fschmd_data *data, int timeout)
672 {
673 int ret, resolution;
674 int kind = data->kind + 1; /* 0-x array index -> 1-x module param */
675
676 /* 2 second or 60 second resolution? */
677 if (timeout <= 510 || kind == fscpos || kind == fscscy)
678 resolution = 2;
679 else
680 resolution = 60;
681
682 if (timeout < resolution || timeout > (resolution * 255))
683 return -EINVAL;
684
685 mutex_lock(&data->watchdog_lock);
686 if (!data->client) {
687 ret = -ENODEV;
688 goto leave;
689 }
690
691 if (resolution == 2)
692 data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_RESOLUTION;
693 else
694 data->watchdog_control |= FSCHMD_WDOG_CONTROL_RESOLUTION;
695
696 data->watchdog_preset = DIV_ROUND_UP(timeout, resolution);
697
698 /* Write new timeout value */
699 i2c_smbus_write_byte_data(data->client,
700 FSCHMD_REG_WDOG_PRESET[data->kind], data->watchdog_preset);
701 /* Write new control register, do not trigger! */
702 i2c_smbus_write_byte_data(data->client,
703 FSCHMD_REG_WDOG_CONTROL[data->kind],
704 data->watchdog_control & ~FSCHMD_WDOG_CONTROL_TRIGGER);
705
706 ret = data->watchdog_preset * resolution;
707
708 leave:
709 mutex_unlock(&data->watchdog_lock);
710 return ret;
711 }
712
713 static int watchdog_get_timeout(struct fschmd_data *data)
714 {
715 int timeout;
716
717 mutex_lock(&data->watchdog_lock);
718 if (data->watchdog_control & FSCHMD_WDOG_CONTROL_RESOLUTION)
719 timeout = data->watchdog_preset * 60;
720 else
721 timeout = data->watchdog_preset * 2;
722 mutex_unlock(&data->watchdog_lock);
723
724 return timeout;
725 }
726
727 static int watchdog_trigger(struct fschmd_data *data)
728 {
729 int ret = 0;
730
731 mutex_lock(&data->watchdog_lock);
732 if (!data->client) {
733 ret = -ENODEV;
734 goto leave;
735 }
736
737 data->watchdog_control |= FSCHMD_WDOG_CONTROL_TRIGGER;
738 i2c_smbus_write_byte_data(data->client,
739 FSCHMD_REG_WDOG_CONTROL[data->kind],
740 data->watchdog_control);
741 leave:
742 mutex_unlock(&data->watchdog_lock);
743 return ret;
744 }
745
746 static int watchdog_stop(struct fschmd_data *data)
747 {
748 int ret = 0;
749
750 mutex_lock(&data->watchdog_lock);
751 if (!data->client) {
752 ret = -ENODEV;
753 goto leave;
754 }
755
756 data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED;
757 /* Don't store the stop flag in our watchdog control register copy, as
758 its a write only bit (read always returns 0) */
759 i2c_smbus_write_byte_data(data->client,
760 FSCHMD_REG_WDOG_CONTROL[data->kind],
761 data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP);
762 leave:
763 mutex_unlock(&data->watchdog_lock);
764 return ret;
765 }
766
767 static int watchdog_open(struct inode *inode, struct file *filp)
768 {
769 struct fschmd_data *pos, *data = NULL;
770 int watchdog_is_open;
771
772 /* We get called from drivers/char/misc.c with misc_mtx hold, and we
773 call misc_register() from fschmd_probe() with watchdog_data_mutex
774 hold, as misc_register() takes the misc_mtx lock, this is a possible
775 deadlock, so we use mutex_trylock here. */
776 if (!mutex_trylock(&watchdog_data_mutex))
777 return -ERESTARTSYS;
778 list_for_each_entry(pos, &watchdog_data_list, list) {
779 if (pos->watchdog_miscdev.minor == iminor(inode)) {
780 data = pos;
781 break;
782 }
783 }
784 /* Note we can never not have found data, so we don't check for this */
785 watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
786 if (!watchdog_is_open)
787 kref_get(&data->kref);
788 mutex_unlock(&watchdog_data_mutex);
789
790 if (watchdog_is_open)
791 return -EBUSY;
792
793 /* Start the watchdog */
794 watchdog_trigger(data);
795 filp->private_data = data;
796
797 return nonseekable_open(inode, filp);
798 }
799
800 static int watchdog_release(struct inode *inode, struct file *filp)
801 {
802 struct fschmd_data *data = filp->private_data;
803
804 if (data->watchdog_expect_close) {
805 watchdog_stop(data);
806 data->watchdog_expect_close = 0;
807 } else {
808 watchdog_trigger(data);
809 dev_crit(&data->client->dev,
810 "unexpected close, not stopping watchdog!\n");
811 }
812
813 clear_bit(0, &data->watchdog_is_open);
814
815 mutex_lock(&watchdog_data_mutex);
816 kref_put(&data->kref, fschmd_release_resources);
817 mutex_unlock(&watchdog_data_mutex);
818
819 return 0;
820 }
821
822 static ssize_t watchdog_write(struct file *filp, const char __user *buf,
823 size_t count, loff_t *offset)
824 {
825 int ret;
826 struct fschmd_data *data = filp->private_data;
827
828 if (count) {
829 if (!nowayout) {
830 size_t i;
831
832 /* Clear it in case it was set with a previous write */
833 data->watchdog_expect_close = 0;
834
835 for (i = 0; i != count; i++) {
836 char c;
837 if (get_user(c, buf + i))
838 return -EFAULT;
839 if (c == 'V')
840 data->watchdog_expect_close = 1;
841 }
842 }
843 ret = watchdog_trigger(data);
844 if (ret < 0)
845 return ret;
846 }
847 return count;
848 }
849
850 static int watchdog_ioctl(struct inode *inode, struct file *filp,
851 unsigned int cmd, unsigned long arg)
852 {
853 static struct watchdog_info ident = {
854 .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
855 WDIOF_CARDRESET,
856 .identity = "FSC watchdog"
857 };
858 int i, ret = 0;
859 struct fschmd_data *data = filp->private_data;
860
861 switch (cmd) {
862 case WDIOC_GETSUPPORT:
863 ident.firmware_version = data->revision;
864 if (!nowayout)
865 ident.options |= WDIOF_MAGICCLOSE;
866 if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
867 ret = -EFAULT;
868 break;
869
870 case WDIOC_GETSTATUS:
871 ret = put_user(0, (int __user *)arg);
872 break;
873
874 case WDIOC_GETBOOTSTATUS:
875 if (data->watchdog_state & FSCHMD_WDOG_STATE_CARDRESET)
876 ret = put_user(WDIOF_CARDRESET, (int __user *)arg);
877 else
878 ret = put_user(0, (int __user *)arg);
879 break;
880
881 case WDIOC_KEEPALIVE:
882 ret = watchdog_trigger(data);
883 break;
884
885 case WDIOC_GETTIMEOUT:
886 i = watchdog_get_timeout(data);
887 ret = put_user(i, (int __user *)arg);
888 break;
889
890 case WDIOC_SETTIMEOUT:
891 if (get_user(i, (int __user *)arg)) {
892 ret = -EFAULT;
893 break;
894 }
895 ret = watchdog_set_timeout(data, i);
896 if (ret > 0)
897 ret = put_user(ret, (int __user *)arg);
898 break;
899
900 case WDIOC_SETOPTIONS:
901 if (get_user(i, (int __user *)arg)) {
902 ret = -EFAULT;
903 break;
904 }
905
906 if (i & WDIOS_DISABLECARD)
907 ret = watchdog_stop(data);
908 else if (i & WDIOS_ENABLECARD)
909 ret = watchdog_trigger(data);
910 else
911 ret = -EINVAL;
912
913 break;
914 default:
915 ret = -ENOTTY;
916 }
917
918 return ret;
919 }
920
921 static struct file_operations watchdog_fops = {
922 .owner = THIS_MODULE,
923 .llseek = no_llseek,
924 .open = watchdog_open,
925 .release = watchdog_release,
926 .write = watchdog_write,
927 .ioctl = watchdog_ioctl,
928 };
929
930
931 /*
932 * Detect, register, unregister and update device functions
933 */
934
935 /* DMI decode routine to read voltage scaling factors from special DMI tables,
936 which are available on FSC machines with an fscher or later chip. */
937 static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy)
938 {
939 int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0;
940
941 /* dmi code ugliness, we get passed the address of the contents of
942 a complete DMI record, but in the form of a dmi_header pointer, in
943 reality this address holds header->length bytes of which the header
944 are the first 4 bytes */
945 u8 *dmi_data = (u8 *)header;
946
947 /* We are looking for OEM-specific type 185 */
948 if (header->type != 185)
949 return;
950
951 /* we are looking for what Siemens calls "subtype" 19, the subtype
952 is stored in byte 5 of the dmi block */
953 if (header->length < 5 || dmi_data[4] != 19)
954 return;
955
956 /* After the subtype comes 1 unknown byte and then blocks of 5 bytes,
957 consisting of what Siemens calls an "Entity" number, followed by
958 2 16-bit words in LSB first order */
959 for (i = 6; (i + 4) < header->length; i += 5) {
960 /* entity 1 - 3: voltage multiplier and offset */
961 if (dmi_data[i] >= 1 && dmi_data[i] <= 3) {
962 /* Our in sensors order and the DMI order differ */
963 const int shuffle[3] = { 1, 0, 2 };
964 int in = shuffle[dmi_data[i] - 1];
965
966 /* Check for twice the same entity */
967 if (found & (1 << in))
968 return;
969
970 mult[in] = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
971 offset[in] = dmi_data[i + 3] | (dmi_data[i + 4] << 8);
972
973 found |= 1 << in;
974 }
975
976 /* entity 7: reference voltage */
977 if (dmi_data[i] == 7) {
978 /* Check for twice the same entity */
979 if (found & 0x08)
980 return;
981
982 vref = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
983
984 found |= 0x08;
985 }
986 }
987
988 if (found == 0x0F) {
989 for (i = 0; i < 3; i++) {
990 dmi_mult[i] = mult[i] * 10;
991 dmi_offset[i] = offset[i] * 10;
992 }
993 /* According to the docs there should be separate dmi entries
994 for the mult's and offsets of in3-5 of the syl, but on
995 my test machine these are not present */
996 dmi_mult[3] = dmi_mult[2];
997 dmi_mult[4] = dmi_mult[1];
998 dmi_mult[5] = dmi_mult[2];
999 dmi_offset[3] = dmi_offset[2];
1000 dmi_offset[4] = dmi_offset[1];
1001 dmi_offset[5] = dmi_offset[2];
1002 dmi_vref = vref;
1003 }
1004 }
1005
1006 static int fschmd_detect(struct i2c_client *client, int kind,
1007 struct i2c_board_info *info)
1008 {
1009 struct i2c_adapter *adapter = client->adapter;
1010
1011 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1012 return -ENODEV;
1013
1014 /* Detect & Identify the chip */
1015 if (kind <= 0) {
1016 char id[4];
1017
1018 id[0] = i2c_smbus_read_byte_data(client,
1019 FSCHMD_REG_IDENT_0);
1020 id[1] = i2c_smbus_read_byte_data(client,
1021 FSCHMD_REG_IDENT_1);
1022 id[2] = i2c_smbus_read_byte_data(client,
1023 FSCHMD_REG_IDENT_2);
1024 id[3] = '\0';
1025
1026 if (!strcmp(id, "PEG"))
1027 kind = fscpos;
1028 else if (!strcmp(id, "HER"))
1029 kind = fscher;
1030 else if (!strcmp(id, "SCY"))
1031 kind = fscscy;
1032 else if (!strcmp(id, "HRC"))
1033 kind = fschrc;
1034 else if (!strcmp(id, "HMD"))
1035 kind = fschmd;
1036 else if (!strcmp(id, "HDS"))
1037 kind = fschds;
1038 else if (!strcmp(id, "SYL"))
1039 kind = fscsyl;
1040 else
1041 return -ENODEV;
1042 }
1043
1044 strlcpy(info->type, fschmd_id[kind - 1].name, I2C_NAME_SIZE);
1045
1046 return 0;
1047 }
1048
1049 static int fschmd_probe(struct i2c_client *client,
1050 const struct i2c_device_id *id)
1051 {
1052 struct fschmd_data *data;
1053 const char * const names[7] = { "Poseidon", "Hermes", "Scylla",
1054 "Heracles", "Heimdall", "Hades", "Syleus" };
1055 const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 };
1056 int i, err;
1057 enum chips kind = id->driver_data;
1058
1059 data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL);
1060 if (!data)
1061 return -ENOMEM;
1062
1063 i2c_set_clientdata(client, data);
1064 mutex_init(&data->update_lock);
1065 mutex_init(&data->watchdog_lock);
1066 INIT_LIST_HEAD(&data->list);
1067 kref_init(&data->kref);
1068 /* Store client pointer in our data struct for watchdog usage
1069 (where the client is found through a data ptr instead of the
1070 otherway around) */
1071 data->client = client;
1072
1073 if (kind == fscpos) {
1074 /* The Poseidon has hardwired temp limits, fill these
1075 in for the alarm resetting code */
1076 data->temp_max[0] = 70 + 128;
1077 data->temp_max[1] = 50 + 128;
1078 data->temp_max[2] = 50 + 128;
1079 }
1080
1081 /* Read the special DMI table for fscher and newer chips */
1082 if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) {
1083 dmi_walk(fschmd_dmi_decode, NULL);
1084 if (dmi_vref == -1) {
1085 dev_warn(&client->dev,
1086 "Couldn't get voltage scaling factors from "
1087 "BIOS DMI table, using builtin defaults\n");
1088 dmi_vref = 33;
1089 }
1090 }
1091
1092 /* i2c kind goes from 1-6, we want from 0-5 to address arrays */
1093 data->kind = kind - 1;
1094
1095 /* Read in some never changing registers */
1096 data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
1097 data->global_control = i2c_smbus_read_byte_data(client,
1098 FSCHMD_REG_CONTROL);
1099 data->watchdog_control = i2c_smbus_read_byte_data(client,
1100 FSCHMD_REG_WDOG_CONTROL[data->kind]);
1101 data->watchdog_state = i2c_smbus_read_byte_data(client,
1102 FSCHMD_REG_WDOG_STATE[data->kind]);
1103 data->watchdog_preset = i2c_smbus_read_byte_data(client,
1104 FSCHMD_REG_WDOG_PRESET[data->kind]);
1105
1106 err = device_create_file(&client->dev, &dev_attr_alert_led);
1107 if (err)
1108 goto exit_detach;
1109
1110 for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++) {
1111 err = device_create_file(&client->dev,
1112 &fschmd_attr[i].dev_attr);
1113 if (err)
1114 goto exit_detach;
1115 }
1116
1117 for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) {
1118 /* Poseidon doesn't have TEMP_LIMIT registers */
1119 if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show ==
1120 show_temp_max)
1121 continue;
1122
1123 if (kind == fscsyl) {
1124 if (i % 4 == 0)
1125 data->temp_status[i / 4] =
1126 i2c_smbus_read_byte_data(client,
1127 FSCHMD_REG_TEMP_STATE
1128 [data->kind][i / 4]);
1129 if (data->temp_status[i / 4] & FSCHMD_TEMP_DISABLED)
1130 continue;
1131 }
1132
1133 err = device_create_file(&client->dev,
1134 &fschmd_temp_attr[i].dev_attr);
1135 if (err)
1136 goto exit_detach;
1137 }
1138
1139 for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) {
1140 /* Poseidon doesn't have a FAN_MIN register for its 3rd fan */
1141 if (kind == fscpos &&
1142 !strcmp(fschmd_fan_attr[i].dev_attr.attr.name,
1143 "pwm3_auto_point1_pwm"))
1144 continue;
1145
1146 if (kind == fscsyl) {
1147 if (i % 5 == 0)
1148 data->fan_status[i / 5] =
1149 i2c_smbus_read_byte_data(client,
1150 FSCHMD_REG_FAN_STATE
1151 [data->kind][i / 5]);
1152 if (data->fan_status[i / 5] & FSCHMD_FAN_DISABLED)
1153 continue;
1154 }
1155
1156 err = device_create_file(&client->dev,
1157 &fschmd_fan_attr[i].dev_attr);
1158 if (err)
1159 goto exit_detach;
1160 }
1161
1162 data->hwmon_dev = hwmon_device_register(&client->dev);
1163 if (IS_ERR(data->hwmon_dev)) {
1164 err = PTR_ERR(data->hwmon_dev);
1165 data->hwmon_dev = NULL;
1166 goto exit_detach;
1167 }
1168
1169 /* We take the data_mutex lock early so that watchdog_open() cannot
1170 run when misc_register() has completed, but we've not yet added
1171 our data to the watchdog_data_list (and set the default timeout) */
1172 mutex_lock(&watchdog_data_mutex);
1173 for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) {
1174 /* Register our watchdog part */
1175 snprintf(data->watchdog_name, sizeof(data->watchdog_name),
1176 "watchdog%c", (i == 0) ? '\0' : ('' + i));
1177 data->watchdog_miscdev.name = data->watchdog_name;
1178 data->watchdog_miscdev.fops = &watchdog_fops;
1179 data->watchdog_miscdev.minor = watchdog_minors[i];
1180 err = misc_register(&data->watchdog_miscdev);
1181 if (err == -EBUSY)
1182 continue;
1183 if (err) {
1184 data->watchdog_miscdev.minor = 0;
1185 dev_err(&client->dev,
1186 "Registering watchdog chardev: %d\n", err);
1187 break;
1188 }
1189
1190 list_add(&data->list, &watchdog_data_list);
1191 watchdog_set_timeout(data, 60);
1192 dev_info(&client->dev,
1193 "Registered watchdog chardev major 10, minor: %d\n",
1194 watchdog_minors[i]);
1195 break;
1196 }
1197 if (i == ARRAY_SIZE(watchdog_minors)) {
1198 data->watchdog_miscdev.minor = 0;
1199 dev_warn(&client->dev, "Couldn't register watchdog chardev "
1200 "(due to no free minor)\n");
1201 }
1202 mutex_unlock(&watchdog_data_mutex);
1203
1204 dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n",
1205 names[data->kind], (int) data->revision);
1206
1207 return 0;
1208
1209 exit_detach:
1210 fschmd_remove(client); /* will also free data for us */
1211 return err;
1212 }
1213
1214 static int fschmd_remove(struct i2c_client *client)
1215 {
1216 struct fschmd_data *data = i2c_get_clientdata(client);
1217 int i;
1218
1219 /* Unregister the watchdog (if registered) */
1220 if (data->watchdog_miscdev.minor) {
1221 misc_deregister(&data->watchdog_miscdev);
1222 if (data->watchdog_is_open) {
1223 dev_warn(&client->dev,
1224 "i2c client detached with watchdog open! "
1225 "Stopping watchdog.\n");
1226 watchdog_stop(data);
1227 }
1228 mutex_lock(&watchdog_data_mutex);
1229 list_del(&data->list);
1230 mutex_unlock(&watchdog_data_mutex);
1231 /* Tell the watchdog code the client is gone */
1232 mutex_lock(&data->watchdog_lock);
1233 data->client = NULL;
1234 mutex_unlock(&data->watchdog_lock);
1235 }
1236
1237 /* Check if registered in case we're called from fschmd_detect
1238 to cleanup after an error */
1239 if (data->hwmon_dev)
1240 hwmon_device_unregister(data->hwmon_dev);
1241
1242 device_remove_file(&client->dev, &dev_attr_alert_led);
1243 for (i = 0; i < (FSCHMD_NO_VOLT_SENSORS[data->kind]); i++)
1244 device_remove_file(&client->dev, &fschmd_attr[i].dev_attr);
1245 for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++)
1246 device_remove_file(&client->dev,
1247 &fschmd_temp_attr[i].dev_attr);
1248 for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++)
1249 device_remove_file(&client->dev,
1250 &fschmd_fan_attr[i].dev_attr);
1251
1252 mutex_lock(&watchdog_data_mutex);
1253 kref_put(&data->kref, fschmd_release_resources);
1254 mutex_unlock(&watchdog_data_mutex);
1255
1256 return 0;
1257 }
1258
1259 static struct fschmd_data *fschmd_update_device(struct device *dev)
1260 {
1261 struct i2c_client *client = to_i2c_client(dev);
1262 struct fschmd_data *data = i2c_get_clientdata(client);
1263 int i;
1264
1265 mutex_lock(&data->update_lock);
1266
1267 if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
1268
1269 for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) {
1270 data->temp_act[i] = i2c_smbus_read_byte_data(client,
1271 FSCHMD_REG_TEMP_ACT[data->kind][i]);
1272 data->temp_status[i] = i2c_smbus_read_byte_data(client,
1273 FSCHMD_REG_TEMP_STATE[data->kind][i]);
1274
1275 /* The fscpos doesn't have TEMP_LIMIT registers */
1276 if (FSCHMD_REG_TEMP_LIMIT[data->kind][i])
1277 data->temp_max[i] = i2c_smbus_read_byte_data(
1278 client,
1279 FSCHMD_REG_TEMP_LIMIT[data->kind][i]);
1280
1281 /* reset alarm if the alarm condition is gone,
1282 the chip doesn't do this itself */
1283 if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) ==
1284 FSCHMD_TEMP_ALARM_MASK &&
1285 data->temp_act[i] < data->temp_max[i])
1286 i2c_smbus_write_byte_data(client,
1287 FSCHMD_REG_TEMP_STATE[data->kind][i],
1288 data->temp_status[i]);
1289 }
1290
1291 for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) {
1292 data->fan_act[i] = i2c_smbus_read_byte_data(client,
1293 FSCHMD_REG_FAN_ACT[data->kind][i]);
1294 data->fan_status[i] = i2c_smbus_read_byte_data(client,
1295 FSCHMD_REG_FAN_STATE[data->kind][i]);
1296 data->fan_ripple[i] = i2c_smbus_read_byte_data(client,
1297 FSCHMD_REG_FAN_RIPPLE[data->kind][i]);
1298
1299 /* The fscpos third fan doesn't have a fan_min */
1300 if (FSCHMD_REG_FAN_MIN[data->kind][i])
1301 data->fan_min[i] = i2c_smbus_read_byte_data(
1302 client,
1303 FSCHMD_REG_FAN_MIN[data->kind][i]);
1304
1305 /* reset fan status if speed is back to > 0 */
1306 if ((data->fan_status[i] & FSCHMD_FAN_ALARM) &&
1307 data->fan_act[i])
1308 i2c_smbus_write_byte_data(client,
1309 FSCHMD_REG_FAN_STATE[data->kind][i],
1310 data->fan_status[i]);
1311 }
1312
1313 for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++)
1314 data->volt[i] = i2c_smbus_read_byte_data(client,
1315 FSCHMD_REG_VOLT[data->kind][i]);
1316
1317 data->last_updated = jiffies;
1318 data->valid = 1;
1319 }
1320
1321 mutex_unlock(&data->update_lock);
1322
1323 return data;
1324 }
1325
1326 static int __init fschmd_init(void)
1327 {
1328 return i2c_add_driver(&fschmd_driver);
1329 }
1330
1331 static void __exit fschmd_exit(void)
1332 {
1333 i2c_del_driver(&fschmd_driver);
1334 }
1335
1336 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
1337 MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles, Heimdall, Hades "
1338 "and Syleus driver");
1339 MODULE_LICENSE("GPL");
1340
1341 module_init(fschmd_init);
1342 module_exit(fschmd_exit);
1343
|
This page was automatically generated by the
LXR engine.
|