Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * Parse the EFI PCDP table to locate the console device.
  3  *
  4  * (c) Copyright 2002, 2003, 2004 Hewlett-Packard Development Company, L.P.
  5  *      Khalid Aziz <khalid.aziz@hp.com>
  6  *      Alex Williamson <alex.williamson@hp.com>
  7  *      Bjorn Helgaas <bjorn.helgaas@hp.com>
  8  *
  9  * This program is free software; you can redistribute it and/or modify
 10  * it under the terms of the GNU General Public License version 2 as
 11  * published by the Free Software Foundation.
 12  */
 13 
 14 #include <linux/acpi.h>
 15 #include <linux/console.h>
 16 #include <linux/efi.h>
 17 #include <linux/serial.h>
 18 #include <linux/serial_8250.h>
 19 #include <asm/vga.h>
 20 #include "pcdp.h"
 21 
 22 static int __init
 23 setup_serial_console(struct pcdp_uart *uart)
 24 {
 25 #ifdef CONFIG_SERIAL_8250_CONSOLE
 26         int mmio;
 27         static char options[64], *p = options;
 28         char parity;
 29 
 30         mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
 31         p += sprintf(p, "uart8250,%s,0x%lx",
 32                 mmio ? "mmio" : "io", uart->addr.address);
 33         if (uart->baud) {
 34                 p += sprintf(p, ",%lu", uart->baud);
 35                 if (uart->bits) {
 36                         switch (uart->parity) {
 37                             case 0x2: parity = 'e'; break;
 38                             case 0x3: parity = 'o'; break;
 39                             default:  parity = 'n';
 40                         }
 41                         p += sprintf(p, "%c%d", parity, uart->bits);
 42                 }
 43         }
 44 
 45         add_preferred_console("uart", 8250, &options[9]);
 46         return setup_early_serial8250_console(options);
 47 #else
 48         return -ENODEV;
 49 #endif
 50 }
 51 
 52 static int __init
 53 setup_vga_console(struct pcdp_device *dev)
 54 {
 55 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 56         u8 *if_ptr;
 57 
 58         if_ptr = ((u8 *)dev + sizeof(struct pcdp_device));
 59         if (if_ptr[0] == PCDP_IF_PCI) {
 60                 struct pcdp_if_pci if_pci;
 61 
 62                 /* struct copy since ifptr might not be correctly aligned */
 63 
 64                 memcpy(&if_pci, if_ptr, sizeof(if_pci));
 65 
 66                 if (if_pci.trans & PCDP_PCI_TRANS_IOPORT)
 67                         vga_console_iobase = if_pci.ioport_tra;
 68 
 69                 if (if_pci.trans & PCDP_PCI_TRANS_MMIO)
 70                         vga_console_membase = if_pci.mmio_tra;
 71         }
 72 
 73         if (efi_mem_type(vga_console_membase + 0xA0000) == EFI_CONVENTIONAL_MEMORY) {
 74                 printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n");
 75                 return -ENODEV;
 76         }
 77 
 78         conswitchp = &vga_con;
 79         printk(KERN_INFO "PCDP: VGA console\n");
 80         return 0;
 81 #else
 82         return -ENODEV;
 83 #endif
 84 }
 85 
 86 int __init
 87 efi_setup_pcdp_console(char *cmdline)
 88 {
 89         struct pcdp *pcdp;
 90         struct pcdp_uart *uart;
 91         struct pcdp_device *dev, *end;
 92         int i, serial = 0;
 93         int rc = -ENODEV;
 94 
 95         if (efi.hcdp == EFI_INVALID_TABLE_ADDR)
 96                 return -ENODEV;
 97 
 98         pcdp = ioremap(efi.hcdp, 4096);
 99         printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, efi.hcdp);
100 
101         if (strstr(cmdline, "console=hcdp")) {
102                 if (pcdp->rev < 3)
103                         serial = 1;
104         } else if (strstr(cmdline, "console=")) {
105                 printk(KERN_INFO "Explicit \"console=\"; ignoring PCDP\n");
106                 goto out;
107         }
108 
109         if (pcdp->rev < 3 && efi_uart_console_only())
110                 serial = 1;
111 
112         for (i = 0, uart = pcdp->uart; i < pcdp->num_uarts; i++, uart++) {
113                 if (uart->flags & PCDP_UART_PRIMARY_CONSOLE || serial) {
114                         if (uart->type == PCDP_CONSOLE_UART) {
115                                 rc = setup_serial_console(uart);
116                                 goto out;
117                         }
118                 }
119         }
120 
121         end = (struct pcdp_device *) ((u8 *) pcdp + pcdp->length);
122         for (dev = (struct pcdp_device *) (pcdp->uart + pcdp->num_uarts);
123              dev < end;
124              dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) {
125                 if (dev->flags & PCDP_PRIMARY_CONSOLE) {
126                         if (dev->type == PCDP_CONSOLE_VGA) {
127                                 rc = setup_vga_console(dev);
128                                 goto out;
129                         }
130                 }
131         }
132 
133 out:
134         iounmap(pcdp);
135         return rc;
136 }
137 
  This page was automatically generated by the LXR engine.