1 /*
2 * Intel 5000(P/V/X) class Memory Controllers kernel module
3 *
4 * This file may be distributed under the terms of the
5 * GNU General Public License.
6 *
7 * Written by Douglas Thompson Linux Networx (http://lnxi.com)
8 * norsk5@xmission.com
9 *
10 * This module is based on the following document:
11 *
12 * Intel 5000X Chipset Memory Controller Hub (MCH) - Datasheet
13 * http://developer.intel.com/design/chipsets/datashts/313070.htm
14 *
15 */
16
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/pci.h>
20 #include <linux/pci_ids.h>
21 #include <linux/slab.h>
22 #include <linux/edac.h>
23 #include <asm/mmzone.h>
24
25 #include "edac_core.h"
26
27 /*
28 * Alter this version for the I5000 module when modifications are made
29 */
30 #define I5000_REVISION " Ver: 2.0.12 " __DATE__
31 #define EDAC_MOD_STR "i5000_edac"
32
33 #define i5000_printk(level, fmt, arg...) \
34 edac_printk(level, "i5000", fmt, ##arg)
35
36 #define i5000_mc_printk(mci, level, fmt, arg...) \
37 edac_mc_chipset_printk(mci, level, "i5000", fmt, ##arg)
38
39 #ifndef PCI_DEVICE_ID_INTEL_FBD_0
40 #define PCI_DEVICE_ID_INTEL_FBD_0 0x25F5
41 #endif
42 #ifndef PCI_DEVICE_ID_INTEL_FBD_1
43 #define PCI_DEVICE_ID_INTEL_FBD_1 0x25F6
44 #endif
45
46 /* Device 16,
47 * Function 0: System Address
48 * Function 1: Memory Branch Map, Control, Errors Register
49 * Function 2: FSB Error Registers
50 *
51 * All 3 functions of Device 16 (0,1,2) share the SAME DID
52 */
53 #define PCI_DEVICE_ID_INTEL_I5000_DEV16 0x25F0
54
55 /* OFFSETS for Function 0 */
56
57 /* OFFSETS for Function 1 */
58 #define AMBASE 0x48
59 #define MAXCH 0x56
60 #define MAXDIMMPERCH 0x57
61 #define TOLM 0x6C
62 #define REDMEMB 0x7C
63 #define RED_ECC_LOCATOR(x) ((x) & 0x3FFFF)
64 #define REC_ECC_LOCATOR_EVEN(x) ((x) & 0x001FF)
65 #define REC_ECC_LOCATOR_ODD(x) ((x) & 0x3FE00)
66 #define MIR0 0x80
67 #define MIR1 0x84
68 #define MIR2 0x88
69 #define AMIR0 0x8C
70 #define AMIR1 0x90
71 #define AMIR2 0x94
72
73 #define FERR_FAT_FBD 0x98
74 #define NERR_FAT_FBD 0x9C
75 #define EXTRACT_FBDCHAN_INDX(x) (((x)>>28) & 0x3)
76 #define FERR_FAT_FBDCHAN 0x30000000
77 #define FERR_FAT_M3ERR 0x00000004
78 #define FERR_FAT_M2ERR 0x00000002
79 #define FERR_FAT_M1ERR 0x00000001
80 #define FERR_FAT_MASK (FERR_FAT_M1ERR | \
81 FERR_FAT_M2ERR | \
82 FERR_FAT_M3ERR)
83
84 #define FERR_NF_FBD 0xA0
85
86 /* Thermal and SPD or BFD errors */
87 #define FERR_NF_M28ERR 0x01000000
88 #define FERR_NF_M27ERR 0x00800000
89 #define FERR_NF_M26ERR 0x00400000
90 #define FERR_NF_M25ERR 0x00200000
91 #define FERR_NF_M24ERR 0x00100000
92 #define FERR_NF_M23ERR 0x00080000
93 #define FERR_NF_M22ERR 0x00040000
94 #define FERR_NF_M21ERR 0x00020000
95
96 /* Correctable errors */
97 #define FERR_NF_M20ERR 0x00010000
98 #define FERR_NF_M19ERR 0x00008000
99 #define FERR_NF_M18ERR 0x00004000
100 #define FERR_NF_M17ERR 0x00002000
101
102 /* Non-Retry or redundant Retry errors */
103 #define FERR_NF_M16ERR 0x00001000
104 #define FERR_NF_M15ERR 0x00000800
105 #define FERR_NF_M14ERR 0x00000400
106 #define FERR_NF_M13ERR 0x00000200
107
108 /* Uncorrectable errors */
109 #define FERR_NF_M12ERR 0x00000100
110 #define FERR_NF_M11ERR 0x00000080
111 #define FERR_NF_M10ERR 0x00000040
112 #define FERR_NF_M9ERR 0x00000020
113 #define FERR_NF_M8ERR 0x00000010
114 #define FERR_NF_M7ERR 0x00000008
115 #define FERR_NF_M6ERR 0x00000004
116 #define FERR_NF_M5ERR 0x00000002
117 #define FERR_NF_M4ERR 0x00000001
118
119 #define FERR_NF_UNCORRECTABLE (FERR_NF_M12ERR | \
120 FERR_NF_M11ERR | \
121 FERR_NF_M10ERR | \
122 FERR_NF_M9ERR | \
123 FERR_NF_M8ERR | \
124 FERR_NF_M7ERR | \
125 FERR_NF_M6ERR | \
126 FERR_NF_M5ERR | \
127 FERR_NF_M4ERR)
128 #define FERR_NF_CORRECTABLE (FERR_NF_M20ERR | \
129 FERR_NF_M19ERR | \
130 FERR_NF_M18ERR | \
131 FERR_NF_M17ERR)
132 #define FERR_NF_DIMM_SPARE (FERR_NF_M27ERR | \
133 FERR_NF_M28ERR)
134 #define FERR_NF_THERMAL (FERR_NF_M26ERR | \
135 FERR_NF_M25ERR | \
136 FERR_NF_M24ERR | \
137 FERR_NF_M23ERR)
138 #define FERR_NF_SPD_PROTOCOL (FERR_NF_M22ERR)
139 #define FERR_NF_NORTH_CRC (FERR_NF_M21ERR)
140 #define FERR_NF_NON_RETRY (FERR_NF_M13ERR | \
141 FERR_NF_M14ERR | \
142 FERR_NF_M15ERR)
143
144 #define NERR_NF_FBD 0xA4
145 #define FERR_NF_MASK (FERR_NF_UNCORRECTABLE | \
146 FERR_NF_CORRECTABLE | \
147 FERR_NF_DIMM_SPARE | \
148 FERR_NF_THERMAL | \
149 FERR_NF_SPD_PROTOCOL | \
150 FERR_NF_NORTH_CRC | \
151 FERR_NF_NON_RETRY)
152
153 #define EMASK_FBD 0xA8
154 #define EMASK_FBD_M28ERR 0x08000000
155 #define EMASK_FBD_M27ERR 0x04000000
156 #define EMASK_FBD_M26ERR 0x02000000
157 #define EMASK_FBD_M25ERR 0x01000000
158 #define EMASK_FBD_M24ERR 0x00800000
159 #define EMASK_FBD_M23ERR 0x00400000
160 #define EMASK_FBD_M22ERR 0x00200000
161 #define EMASK_FBD_M21ERR 0x00100000
162 #define EMASK_FBD_M20ERR 0x00080000
163 #define EMASK_FBD_M19ERR 0x00040000
164 #define EMASK_FBD_M18ERR 0x00020000
165 #define EMASK_FBD_M17ERR 0x00010000
166
167 #define EMASK_FBD_M15ERR 0x00004000
168 #define EMASK_FBD_M14ERR 0x00002000
169 #define EMASK_FBD_M13ERR 0x00001000
170 #define EMASK_FBD_M12ERR 0x00000800
171 #define EMASK_FBD_M11ERR 0x00000400
172 #define EMASK_FBD_M10ERR 0x00000200
173 #define EMASK_FBD_M9ERR 0x00000100
174 #define EMASK_FBD_M8ERR 0x00000080
175 #define EMASK_FBD_M7ERR 0x00000040
176 #define EMASK_FBD_M6ERR 0x00000020
177 #define EMASK_FBD_M5ERR 0x00000010
178 #define EMASK_FBD_M4ERR 0x00000008
179 #define EMASK_FBD_M3ERR 0x00000004
180 #define EMASK_FBD_M2ERR 0x00000002
181 #define EMASK_FBD_M1ERR 0x00000001
182
183 #define ENABLE_EMASK_FBD_FATAL_ERRORS (EMASK_FBD_M1ERR | \
184 EMASK_FBD_M2ERR | \
185 EMASK_FBD_M3ERR)
186
187 #define ENABLE_EMASK_FBD_UNCORRECTABLE (EMASK_FBD_M4ERR | \
188 EMASK_FBD_M5ERR | \
189 EMASK_FBD_M6ERR | \
190 EMASK_FBD_M7ERR | \
191 EMASK_FBD_M8ERR | \
192 EMASK_FBD_M9ERR | \
193 EMASK_FBD_M10ERR | \
194 EMASK_FBD_M11ERR | \
195 EMASK_FBD_M12ERR)
196 #define ENABLE_EMASK_FBD_CORRECTABLE (EMASK_FBD_M17ERR | \
197 EMASK_FBD_M18ERR | \
198 EMASK_FBD_M19ERR | \
199 EMASK_FBD_M20ERR)
200 #define ENABLE_EMASK_FBD_DIMM_SPARE (EMASK_FBD_M27ERR | \
201 EMASK_FBD_M28ERR)
202 #define ENABLE_EMASK_FBD_THERMALS (EMASK_FBD_M26ERR | \
203 EMASK_FBD_M25ERR | \
204 EMASK_FBD_M24ERR | \
205 EMASK_FBD_M23ERR)
206 #define ENABLE_EMASK_FBD_SPD_PROTOCOL (EMASK_FBD_M22ERR)
207 #define ENABLE_EMASK_FBD_NORTH_CRC (EMASK_FBD_M21ERR)
208 #define ENABLE_EMASK_FBD_NON_RETRY (EMASK_FBD_M15ERR | \
209 EMASK_FBD_M14ERR | \
210 EMASK_FBD_M13ERR)
211
212 #define ENABLE_EMASK_ALL (ENABLE_EMASK_FBD_NON_RETRY | \
213 ENABLE_EMASK_FBD_NORTH_CRC | \
214 ENABLE_EMASK_FBD_SPD_PROTOCOL | \
215 ENABLE_EMASK_FBD_THERMALS | \
216 ENABLE_EMASK_FBD_DIMM_SPARE | \
217 ENABLE_EMASK_FBD_FATAL_ERRORS | \
218 ENABLE_EMASK_FBD_CORRECTABLE | \
219 ENABLE_EMASK_FBD_UNCORRECTABLE)
220
221 #define ERR0_FBD 0xAC
222 #define ERR1_FBD 0xB0
223 #define ERR2_FBD 0xB4
224 #define MCERR_FBD 0xB8
225 #define NRECMEMA 0xBE
226 #define NREC_BANK(x) (((x)>>12) & 0x7)
227 #define NREC_RDWR(x) (((x)>>11) & 1)
228 #define NREC_RANK(x) (((x)>>8) & 0x7)
229 #define NRECMEMB 0xC0
230 #define NREC_CAS(x) (((x)>>16) & 0xFFFFFF)
231 #define NREC_RAS(x) ((x) & 0x7FFF)
232 #define NRECFGLOG 0xC4
233 #define NREEECFBDA 0xC8
234 #define NREEECFBDB 0xCC
235 #define NREEECFBDC 0xD0
236 #define NREEECFBDD 0xD4
237 #define NREEECFBDE 0xD8
238 #define REDMEMA 0xDC
239 #define RECMEMA 0xE2
240 #define REC_BANK(x) (((x)>>12) & 0x7)
241 #define REC_RDWR(x) (((x)>>11) & 1)
242 #define REC_RANK(x) (((x)>>8) & 0x7)
243 #define RECMEMB 0xE4
244 #define REC_CAS(x) (((x)>>16) & 0xFFFFFF)
245 #define REC_RAS(x) ((x) & 0x7FFF)
246 #define RECFGLOG 0xE8
247 #define RECFBDA 0xEC
248 #define RECFBDB 0xF0
249 #define RECFBDC 0xF4
250 #define RECFBDD 0xF8
251 #define RECFBDE 0xFC
252
253 /* OFFSETS for Function 2 */
254
255 /*
256 * Device 21,
257 * Function 0: Memory Map Branch 0
258 *
259 * Device 22,
260 * Function 0: Memory Map Branch 1
261 */
262 #define PCI_DEVICE_ID_I5000_BRANCH_0 0x25F5
263 #define PCI_DEVICE_ID_I5000_BRANCH_1 0x25F6
264
265 #define AMB_PRESENT_0 0x64
266 #define AMB_PRESENT_1 0x66
267 #define MTR0 0x80
268 #define MTR1 0x84
269 #define MTR2 0x88
270 #define MTR3 0x8C
271
272 #define NUM_MTRS 4
273 #define CHANNELS_PER_BRANCH (2)
274
275 /* Defines to extract the vaious fields from the
276 * MTRx - Memory Technology Registers
277 */
278 #define MTR_DIMMS_PRESENT(mtr) ((mtr) & (0x1 << 8))
279 #define MTR_DRAM_WIDTH(mtr) ((((mtr) >> 6) & 0x1) ? 8 : 4)
280 #define MTR_DRAM_BANKS(mtr) ((((mtr) >> 5) & 0x1) ? 8 : 4)
281 #define MTR_DRAM_BANKS_ADDR_BITS(mtr) ((MTR_DRAM_BANKS(mtr) == 8) ? 3 : 2)
282 #define MTR_DIMM_RANK(mtr) (((mtr) >> 4) & 0x1)
283 #define MTR_DIMM_RANK_ADDR_BITS(mtr) (MTR_DIMM_RANK(mtr) ? 2 : 1)
284 #define MTR_DIMM_ROWS(mtr) (((mtr) >> 2) & 0x3)
285 #define MTR_DIMM_ROWS_ADDR_BITS(mtr) (MTR_DIMM_ROWS(mtr) + 13)
286 #define MTR_DIMM_COLS(mtr) ((mtr) & 0x3)
287 #define MTR_DIMM_COLS_ADDR_BITS(mtr) (MTR_DIMM_COLS(mtr) + 10)
288
289 #ifdef CONFIG_EDAC_DEBUG
290 static char *numrow_toString[] = {
291 "8,192 - 13 rows",
292 "16,384 - 14 rows",
293 "32,768 - 15 rows",
294 "reserved"
295 };
296
297 static char *numcol_toString[] = {
298 "1,024 - 10 columns",
299 "2,048 - 11 columns",
300 "4,096 - 12 columns",
301 "reserved"
302 };
303 #endif
304
305 /* enables the report of miscellaneous messages as CE errors - default off */
306 static int misc_messages;
307
308 /* Enumeration of supported devices */
309 enum i5000_chips {
310 I5000P = 0,
311 I5000V = 1, /* future */
312 I5000X = 2 /* future */
313 };
314
315 /* Device name and register DID (Device ID) */
316 struct i5000_dev_info {
317 const char *ctl_name; /* name for this device */
318 u16 fsb_mapping_errors; /* DID for the branchmap,control */
319 };
320
321 /* Table of devices attributes supported by this driver */
322 static const struct i5000_dev_info i5000_devs[] = {
323 [I5000P] = {
324 .ctl_name = "I5000",
325 .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I5000_DEV16,
326 },
327 };
328
329 struct i5000_dimm_info {
330 int megabytes; /* size, 0 means not present */
331 int dual_rank;
332 };
333
334 #define MAX_CHANNELS 6 /* max possible channels */
335 #define MAX_CSROWS (8*2) /* max possible csrows per channel */
336
337 /* driver private data structure */
338 struct i5000_pvt {
339 struct pci_dev *system_address; /* 16.0 */
340 struct pci_dev *branchmap_werrors; /* 16.1 */
341 struct pci_dev *fsb_error_regs; /* 16.2 */
342 struct pci_dev *branch_0; /* 21.0 */
343 struct pci_dev *branch_1; /* 22.0 */
344
345 u16 tolm; /* top of low memory */
346 u64 ambase; /* AMB BAR */
347
348 u16 mir0, mir1, mir2;
349
350 u16 b0_mtr[NUM_MTRS]; /* Memory Technlogy Reg */
351 u16 b0_ambpresent0; /* Branch 0, Channel 0 */
352 u16 b0_ambpresent1; /* Brnach 0, Channel 1 */
353
354 u16 b1_mtr[NUM_MTRS]; /* Memory Technlogy Reg */
355 u16 b1_ambpresent0; /* Branch 1, Channel 8 */
356 u16 b1_ambpresent1; /* Branch 1, Channel 1 */
357
358 /* DIMM information matrix, allocating architecture maximums */
359 struct i5000_dimm_info dimm_info[MAX_CSROWS][MAX_CHANNELS];
360
361 /* Actual values for this controller */
362 int maxch; /* Max channels */
363 int maxdimmperch; /* Max DIMMs per channel */
364 };
365
366 /* I5000 MCH error information retrieved from Hardware */
367 struct i5000_error_info {
368
369 /* These registers are always read from the MC */
370 u32 ferr_fat_fbd; /* First Errors Fatal */
371 u32 nerr_fat_fbd; /* Next Errors Fatal */
372 u32 ferr_nf_fbd; /* First Errors Non-Fatal */
373 u32 nerr_nf_fbd; /* Next Errors Non-Fatal */
374
375 /* These registers are input ONLY if there was a Recoverable Error */
376 u32 redmemb; /* Recoverable Mem Data Error log B */
377 u16 recmema; /* Recoverable Mem Error log A */
378 u32 recmemb; /* Recoverable Mem Error log B */
379
380 /* These registers are input ONLY if there was a
381 * Non-Recoverable Error */
382 u16 nrecmema; /* Non-Recoverable Mem log A */
383 u16 nrecmemb; /* Non-Recoverable Mem log B */
384
385 };
386
387 static struct edac_pci_ctl_info *i5000_pci;
388
389 /*
390 * i5000_get_error_info Retrieve the hardware error information from
391 * the hardware and cache it in the 'info'
392 * structure
393 */
394 static void i5000_get_error_info(struct mem_ctl_info *mci,
395 struct i5000_error_info *info)
396 {
397 struct i5000_pvt *pvt;
398 u32 value;
399
400 pvt = mci->pvt_info;
401
402 /* read in the 1st FATAL error register */
403 pci_read_config_dword(pvt->branchmap_werrors, FERR_FAT_FBD, &value);
404
405 /* Mask only the bits that the doc says are valid
406 */
407 value &= (FERR_FAT_FBDCHAN | FERR_FAT_MASK);
408
409 /* If there is an error, then read in the */
410 /* NEXT FATAL error register and the Memory Error Log Register A */
411 if (value & FERR_FAT_MASK) {
412 info->ferr_fat_fbd = value;
413
414 /* harvest the various error data we need */
415 pci_read_config_dword(pvt->branchmap_werrors,
416 NERR_FAT_FBD, &info->nerr_fat_fbd);
417 pci_read_config_word(pvt->branchmap_werrors,
418 NRECMEMA, &info->nrecmema);
419 pci_read_config_word(pvt->branchmap_werrors,
420 NRECMEMB, &info->nrecmemb);
421
422 /* Clear the error bits, by writing them back */
423 pci_write_config_dword(pvt->branchmap_werrors,
424 FERR_FAT_FBD, value);
425 } else {
426 info->ferr_fat_fbd = 0;
427 info->nerr_fat_fbd = 0;
428 info->nrecmema = 0;
429 info->nrecmemb = 0;
430 }
431
432 /* read in the 1st NON-FATAL error register */
433 pci_read_config_dword(pvt->branchmap_werrors, FERR_NF_FBD, &value);
434
435 /* If there is an error, then read in the 1st NON-FATAL error
436 * register as well */
437 if (value & FERR_NF_MASK) {
438 info->ferr_nf_fbd = value;
439
440 /* harvest the various error data we need */
441 pci_read_config_dword(pvt->branchmap_werrors,
442 NERR_NF_FBD, &info->nerr_nf_fbd);
443 pci_read_config_word(pvt->branchmap_werrors,
444 RECMEMA, &info->recmema);
445 pci_read_config_dword(pvt->branchmap_werrors,
446 RECMEMB, &info->recmemb);
447 pci_read_config_dword(pvt->branchmap_werrors,
448 REDMEMB, &info->redmemb);
449
450 /* Clear the error bits, by writing them back */
451 pci_write_config_dword(pvt->branchmap_werrors,
452 FERR_NF_FBD, value);
453 } else {
454 info->ferr_nf_fbd = 0;
455 info->nerr_nf_fbd = 0;
456 info->recmema = 0;
457 info->recmemb = 0;
458 info->redmemb = 0;
459 }
460 }
461
462 /*
463 * i5000_process_fatal_error_info(struct mem_ctl_info *mci,
464 * struct i5000_error_info *info,
465 * int handle_errors);
466 *
467 * handle the Intel FATAL errors, if any
468 */
469 static void i5000_process_fatal_error_info(struct mem_ctl_info *mci,
470 struct i5000_error_info *info,
471 int handle_errors)
472 {
473 char msg[EDAC_MC_LABEL_LEN + 1 + 160];
474 char *specific = NULL;
475 u32 allErrors;
476 int branch;
477 int channel;
478 int bank;
479 int rank;
480 int rdwr;
481 int ras, cas;
482
483 /* mask off the Error bits that are possible */
484 allErrors = (info->ferr_fat_fbd & FERR_FAT_MASK);
485 if (!allErrors)
486 return; /* if no error, return now */
487
488 branch = EXTRACT_FBDCHAN_INDX(info->ferr_fat_fbd);
489 channel = branch;
490
491 /* Use the NON-Recoverable macros to extract data */
492 bank = NREC_BANK(info->nrecmema);
493 rank = NREC_RANK(info->nrecmema);
494 rdwr = NREC_RDWR(info->nrecmema);
495 ras = NREC_RAS(info->nrecmemb);
496 cas = NREC_CAS(info->nrecmemb);
497
498 debugf0("\t\tCSROW= %d Channels= %d,%d (Branch= %d "
499 "DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n",
500 rank, channel, channel + 1, branch >> 1, bank,
501 rdwr ? "Write" : "Read", ras, cas);
502
503 /* Only 1 bit will be on */
504 switch (allErrors) {
505 case FERR_FAT_M1ERR:
506 specific = "Alert on non-redundant retry or fast "
507 "reset timeout";
508 break;
509 case FERR_FAT_M2ERR:
510 specific = "Northbound CRC error on non-redundant "
511 "retry";
512 break;
513 case FERR_FAT_M3ERR:
514 {
515 static int done;
516
517 /*
518 * This error is generated to inform that the intelligent
519 * throttling is disabled and the temperature passed the
520 * specified middle point. Since this is something the BIOS
521 * should take care of, we'll warn only once to avoid
522 * worthlessly flooding the log.
523 */
524 if (done)
525 return;
526 done++;
527
528 specific = ">Tmid Thermal event with intelligent "
529 "throttling disabled";
530 }
531 break;
532 }
533
534 /* Form out message */
535 snprintf(msg, sizeof(msg),
536 "(Branch=%d DRAM-Bank=%d RDWR=%s RAS=%d CAS=%d "
537 "FATAL Err=0x%x (%s))",
538 branch >> 1, bank, rdwr ? "Write" : "Read", ras, cas,
539 allErrors, specific);
540
541 /* Call the helper to output message */
542 edac_mc_handle_fbd_ue(mci, rank, channel, channel + 1, msg);
543 }
544
545 /*
546 * i5000_process_fatal_error_info(struct mem_ctl_info *mci,
547 * struct i5000_error_info *info,
548 * int handle_errors);
549 *
550 * handle the Intel NON-FATAL errors, if any
551 */
552 static void i5000_process_nonfatal_error_info(struct mem_ctl_info *mci,
553 struct i5000_error_info *info,
554 int handle_errors)
555 {
556 char msg[EDAC_MC_LABEL_LEN + 1 + 170];
557 char *specific = NULL;
558 u32 allErrors;
559 u32 ue_errors;
560 u32 ce_errors;
561 u32 misc_errors;
562 int branch;
563 int channel;
564 int bank;
565 int rank;
566 int rdwr;
567 int ras, cas;
568
569 /* mask off the Error bits that are possible */
570 allErrors = (info->ferr_nf_fbd & FERR_NF_MASK);
571 if (!allErrors)
572 return; /* if no error, return now */
573
574 /* ONLY ONE of the possible error bits will be set, as per the docs */
575 ue_errors = allErrors & FERR_NF_UNCORRECTABLE;
576 if (ue_errors) {
577 debugf0("\tUncorrected bits= 0x%x\n", ue_errors);
578
579 branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
580
581 /*
582 * According with i5000 datasheet, bit 28 has no significance
583 * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD
584 */
585 channel = branch & 2;
586
587 bank = NREC_BANK(info->nrecmema);
588 rank = NREC_RANK(info->nrecmema);
589 rdwr = NREC_RDWR(info->nrecmema);
590 ras = NREC_RAS(info->nrecmemb);
591 cas = NREC_CAS(info->nrecmemb);
592
593 debugf0
594 ("\t\tCSROW= %d Channels= %d,%d (Branch= %d "
595 "DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n",
596 rank, channel, channel + 1, branch >> 1, bank,
597 rdwr ? "Write" : "Read", ras, cas);
598
599 switch (ue_errors) {
600 case FERR_NF_M12ERR:
601 specific = "Non-Aliased Uncorrectable Patrol Data ECC";
602 break;
603 case FERR_NF_M11ERR:
604 specific = "Non-Aliased Uncorrectable Spare-Copy "
605 "Data ECC";
606 break;
607 case FERR_NF_M10ERR:
608 specific = "Non-Aliased Uncorrectable Mirrored Demand "
609 "Data ECC";
610 break;
611 case FERR_NF_M9ERR:
612 specific = "Non-Aliased Uncorrectable Non-Mirrored "
613 "Demand Data ECC";
614 break;
615 case FERR_NF_M8ERR:
616 specific = "Aliased Uncorrectable Patrol Data ECC";
617 break;
618 case FERR_NF_M7ERR:
619 specific = "Aliased Uncorrectable Spare-Copy Data ECC";
620 break;
621 case FERR_NF_M6ERR:
622 specific = "Aliased Uncorrectable Mirrored Demand "
623 "Data ECC";
624 break;
625 case FERR_NF_M5ERR:
626 specific = "Aliased Uncorrectable Non-Mirrored Demand "
627 "Data ECC";
628 break;
629 case FERR_NF_M4ERR:
630 specific = "Uncorrectable Data ECC on Replay";
631 break;
632 }
633
634 /* Form out message */
635 snprintf(msg, sizeof(msg),
636 "(Branch=%d DRAM-Bank=%d RDWR=%s RAS=%d "
637 "CAS=%d, UE Err=0x%x (%s))",
638 branch >> 1, bank, rdwr ? "Write" : "Read", ras, cas,
639 ue_errors, specific);
640
641 /* Call the helper to output message */
642 edac_mc_handle_fbd_ue(mci, rank, channel, channel + 1, msg);
643 }
644
645 /* Check correctable errors */
646 ce_errors = allErrors & FERR_NF_CORRECTABLE;
647 if (ce_errors) {
648 debugf0("\tCorrected bits= 0x%x\n", ce_errors);
649
650 branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
651
652 channel = 0;
653 if (REC_ECC_LOCATOR_ODD(info->redmemb))
654 channel = 1;
655
656 /* Convert channel to be based from zero, instead of
657 * from branch base of 0 */
658 channel += branch;
659
660 bank = REC_BANK(info->recmema);
661 rank = REC_RANK(info->recmema);
662 rdwr = REC_RDWR(info->recmema);
663 ras = REC_RAS(info->recmemb);
664 cas = REC_CAS(info->recmemb);
665
666 debugf0("\t\tCSROW= %d Channel= %d (Branch %d "
667 "DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n",
668 rank, channel, branch >> 1, bank,
669 rdwr ? "Write" : "Read", ras, cas);
670
671 switch (ce_errors) {
672 case FERR_NF_M17ERR:
673 specific = "Correctable Non-Mirrored Demand Data ECC";
674 break;
675 case FERR_NF_M18ERR:
676 specific = "Correctable Mirrored Demand Data ECC";
677 break;
678 case FERR_NF_M19ERR:
679 specific = "Correctable Spare-Copy Data ECC";
680 break;
681 case FERR_NF_M20ERR:
682 specific = "Correctable Patrol Data ECC";
683 break;
684 }
685
686 /* Form out message */
687 snprintf(msg, sizeof(msg),
688 "(Branch=%d DRAM-Bank=%d RDWR=%s RAS=%d "
689 "CAS=%d, CE Err=0x%x (%s))", branch >> 1, bank,
690 rdwr ? "Write" : "Read", ras, cas, ce_errors,
691 specific);
692
693 /* Call the helper to output message */
694 edac_mc_handle_fbd_ce(mci, rank, channel, msg);
695 }
696
697 if (!misc_messages)
698 return;
699
700 misc_errors = allErrors & (FERR_NF_NON_RETRY | FERR_NF_NORTH_CRC |
701 FERR_NF_SPD_PROTOCOL | FERR_NF_DIMM_SPARE);
702 if (misc_errors) {
703 switch (misc_errors) {
704 case FERR_NF_M13ERR:
705 specific = "Non-Retry or Redundant Retry FBD Memory "
706 "Alert or Redundant Fast Reset Timeout";
707 break;
708 case FERR_NF_M14ERR:
709 specific = "Non-Retry or Redundant Retry FBD "
710 "Configuration Alert";
711 break;
712 case FERR_NF_M15ERR:
713 specific = "Non-Retry or Redundant Retry FBD "
714 "Northbound CRC error on read data";
715 break;
716 case FERR_NF_M21ERR:
717 specific = "FBD Northbound CRC error on "
718 "FBD Sync Status";
719 break;
720 case FERR_NF_M22ERR:
721 specific = "SPD protocol error";
722 break;
723 case FERR_NF_M27ERR:
724 specific = "DIMM-spare copy started";
725 break;
726 case FERR_NF_M28ERR:
727 specific = "DIMM-spare copy completed";
728 break;
729 }
730 branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
731
732 /* Form out message */
733 snprintf(msg, sizeof(msg),
734 "(Branch=%d Err=%#x (%s))", branch >> 1,
735 misc_errors, specific);
736
737 /* Call the helper to output message */
738 edac_mc_handle_fbd_ce(mci, 0, 0, msg);
739 }
740 }
741
742 /*
743 * i5000_process_error_info Process the error info that is
744 * in the 'info' structure, previously retrieved from hardware
745 */
746 static void i5000_process_error_info(struct mem_ctl_info *mci,
747 struct i5000_error_info *info,
748 int handle_errors)
749 {
750 /* First handle any fatal errors that occurred */
751 i5000_process_fatal_error_info(mci, info, handle_errors);
752
753 /* now handle any non-fatal errors that occurred */
754 i5000_process_nonfatal_error_info(mci, info, handle_errors);
755 }
756
757 /*
758 * i5000_clear_error Retrieve any error from the hardware
759 * but do NOT process that error.
760 * Used for 'clearing' out of previous errors
761 * Called by the Core module.
762 */
763 static void i5000_clear_error(struct mem_ctl_info *mci)
764 {
765 struct i5000_error_info info;
766
767 i5000_get_error_info(mci, &info);
768 }
769
770 /*
771 * i5000_check_error Retrieve and process errors reported by the
772 * hardware. Called by the Core module.
773 */
774 static void i5000_check_error(struct mem_ctl_info *mci)
775 {
776 struct i5000_error_info info;
777 debugf4("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
778 i5000_get_error_info(mci, &info);
779 i5000_process_error_info(mci, &info, 1);
780 }
781
782 /*
783 * i5000_get_devices Find and perform 'get' operation on the MCH's
784 * device/functions we want to reference for this driver
785 *
786 * Need to 'get' device 16 func 1 and func 2
787 */
788 static int i5000_get_devices(struct mem_ctl_info *mci, int dev_idx)
789 {
790 //const struct i5000_dev_info *i5000_dev = &i5000_devs[dev_idx];
791 struct i5000_pvt *pvt;
792 struct pci_dev *pdev;
793
794 pvt = mci->pvt_info;
795
796 /* Attempt to 'get' the MCH register we want */
797 pdev = NULL;
798 while (1) {
799 pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
800 PCI_DEVICE_ID_INTEL_I5000_DEV16, pdev);
801
802 /* End of list, leave */
803 if (pdev == NULL) {
804 i5000_printk(KERN_ERR,
805 "'system address,Process Bus' "
806 "device not found:"
807 "vendor 0x%x device 0x%x FUNC 1 "
808 "(broken BIOS?)\n",
809 PCI_VENDOR_ID_INTEL,
810 PCI_DEVICE_ID_INTEL_I5000_DEV16);
811
812 return 1;
813 }
814
815 /* Scan for device 16 func 1 */
816 if (PCI_FUNC(pdev->devfn) == 1)
817 break;
818 }
819
820 pvt->branchmap_werrors = pdev;
821
822 /* Attempt to 'get' the MCH register we want */
823 pdev = NULL;
824 while (1) {
825 pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
826 PCI_DEVICE_ID_INTEL_I5000_DEV16, pdev);
827
828 if (pdev == NULL) {
829 i5000_printk(KERN_ERR,
830 "MC: 'branchmap,control,errors' "
831 "device not found:"
832 "vendor 0x%x device 0x%x Func 2 "
833 "(broken BIOS?)\n",
834 PCI_VENDOR_ID_INTEL,
835 PCI_DEVICE_ID_INTEL_I5000_DEV16);
836
837 pci_dev_put(pvt->branchmap_werrors);
838 return 1;
839 }
840
841 /* Scan for device 16 func 1 */
842 if (PCI_FUNC(pdev->devfn) == 2)
843 break;
844 }
845
846 pvt->fsb_error_regs = pdev;
847
848 debugf1("System Address, processor bus- PCI Bus ID: %s %x:%x\n",
849 pci_name(pvt->system_address),
850 pvt->system_address->vendor, pvt->system_address->device);
851 debugf1("Branchmap, control and errors - PCI Bus ID: %s %x:%x\n",
852 pci_name(pvt->branchmap_werrors),
853 pvt->branchmap_werrors->vendor, pvt->branchmap_werrors->device);
854 debugf1("FSB Error Regs - PCI Bus ID: %s %x:%x\n",
855 pci_name(pvt->fsb_error_regs),
856 pvt->fsb_error_regs->vendor, pvt->fsb_error_regs->device);
857
858 pdev = NULL;
859 pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
860 PCI_DEVICE_ID_I5000_BRANCH_0, pdev);
861
862 if (pdev == NULL) {
863 i5000_printk(KERN_ERR,
864 "MC: 'BRANCH 0' device not found:"
865 "vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n",
866 PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_I5000_BRANCH_0);
867
868 pci_dev_put(pvt->branchmap_werrors);
869 pci_dev_put(pvt->fsb_error_regs);
870 return 1;
871 }
872
873 pvt->branch_0 = pdev;
874
875 /* If this device claims to have more than 2 channels then
876 * fetch Branch 1's information
877 */
878 if (pvt->maxch >= CHANNELS_PER_BRANCH) {
879 pdev = NULL;
880 pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
881 PCI_DEVICE_ID_I5000_BRANCH_1, pdev);
882
883 if (pdev == NULL) {
884 i5000_printk(KERN_ERR,
885 "MC: 'BRANCH 1' device not found:"
886 "vendor 0x%x device 0x%x Func 0 "
887 "(broken BIOS?)\n",
888 PCI_VENDOR_ID_INTEL,
889 PCI_DEVICE_ID_I5000_BRANCH_1);
890
891 pci_dev_put(pvt->branchmap_werrors);
892 pci_dev_put(pvt->fsb_error_regs);
893 pci_dev_put(pvt->branch_0);
894 return 1;
895 }
896
897 pvt->branch_1 = pdev;
898 }
899
900 return 0;
901 }
902
903 /*
904 * i5000_put_devices 'put' all the devices that we have
905 * reserved via 'get'
906 */
907 static void i5000_put_devices(struct mem_ctl_info *mci)
908 {
909 struct i5000_pvt *pvt;
910
911 pvt = mci->pvt_info;
912
913 pci_dev_put(pvt->branchmap_werrors); /* FUNC 1 */
914 pci_dev_put(pvt->fsb_error_regs); /* FUNC 2 */
915 pci_dev_put(pvt->branch_0); /* DEV 21 */
916
917 /* Only if more than 2 channels do we release the second branch */
918 if (pvt->maxch >= CHANNELS_PER_BRANCH)
919 pci_dev_put(pvt->branch_1); /* DEV 22 */
920 }
921
922 /*
923 * determine_amb_resent
924 *
925 * the information is contained in NUM_MTRS different registers
926 * determineing which of the NUM_MTRS requires knowing
927 * which channel is in question
928 *
929 * 2 branches, each with 2 channels
930 * b0_ambpresent0 for channel ''
931 * b0_ambpresent1 for channel '1'
932 * b1_ambpresent0 for channel '2'
933 * b1_ambpresent1 for channel '3'
934 */
935 static int determine_amb_present_reg(struct i5000_pvt *pvt, int channel)
936 {
937 int amb_present;
938
939 if (channel < CHANNELS_PER_BRANCH) {
940 if (channel & 0x1)
941 amb_present = pvt->b0_ambpresent1;
942 else
943 amb_present = pvt->b0_ambpresent0;
944 } else {
945 if (channel & 0x1)
946 amb_present = pvt->b1_ambpresent1;
947 else
948 amb_present = pvt->b1_ambpresent0;
949 }
950
951 return amb_present;
952 }
953
954 /*
955 * determine_mtr(pvt, csrow, channel)
956 *
957 * return the proper MTR register as determine by the csrow and channel desired
958 */
959 static int determine_mtr(struct i5000_pvt *pvt, int csrow, int channel)
960 {
961 int mtr;
962
963 if (channel < CHANNELS_PER_BRANCH)
964 mtr = pvt->b0_mtr[csrow >> 1];
965 else
966 mtr = pvt->b1_mtr[csrow >> 1];
967
968 return mtr;
969 }
970
971 /*
972 */
973 static void decode_mtr(int slot_row, u16 mtr)
974 {
975 int ans;
976
977 ans = MTR_DIMMS_PRESENT(mtr);
978
979 debugf2("\tMTR%d=0x%x: DIMMs are %s\n", slot_row, mtr,
980 ans ? "Present" : "NOT Present");
981 if (!ans)
982 return;
983
984 debugf2("\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));
985 debugf2("\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
986 debugf2("\t\tNUMRANK: %s\n", MTR_DIMM_RANK(mtr) ? "double" : "single");
987 debugf2("\t\tNUMROW: %s\n", numrow_toString[MTR_DIMM_ROWS(mtr)]);
988 debugf2("\t\tNUMCOL: %s\n", numcol_toString[MTR_DIMM_COLS(mtr)]);
989 }
990
991 static void handle_channel(struct i5000_pvt *pvt, int csrow, int channel,
992 struct i5000_dimm_info *dinfo)
993 {
994 int mtr;
995 int amb_present_reg;
996 int addrBits;
997
998 mtr = determine_mtr(pvt, csrow, channel);
999 if (MTR_DIMMS_PRESENT(mtr)) {
1000 amb_present_reg = determine_amb_present_reg(pvt, channel);
1001
1002 /* Determine if there is a DIMM present in this DIMM slot */
1003 if (amb_present_reg & (1 << (csrow >> 1))) {
1004 dinfo->dual_rank = MTR_DIMM_RANK(mtr);
1005
1006 if (!((dinfo->dual_rank == 0) &&
1007 ((csrow & 0x1) == 0x1))) {
1008 /* Start with the number of bits for a Bank
1009 * on the DRAM */
1010 addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
1011 /* Add thenumber of ROW bits */
1012 addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
1013 /* add the number of COLUMN bits */
1014 addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
1015
1016 addrBits += 6; /* add 64 bits per DIMM */
1017 addrBits -= 20; /* divide by 2^^20 */
1018 addrBits -= 3; /* 8 bits per bytes */
1019
1020 dinfo->megabytes = 1 << addrBits;
1021 }
1022 }
1023 }
1024 }
1025
1026 /*
1027 * calculate_dimm_size
1028 *
1029 * also will output a DIMM matrix map, if debug is enabled, for viewing
1030 * how the DIMMs are populated
1031 */
1032 static void calculate_dimm_size(struct i5000_pvt *pvt)
1033 {
1034 struct i5000_dimm_info *dinfo;
1035 int csrow, max_csrows;
1036 char *p, *mem_buffer;
1037 int space, n;
1038 int channel;
1039
1040 /* ================= Generate some debug output ================= */
1041 space = PAGE_SIZE;
1042 mem_buffer = p = kmalloc(space, GFP_KERNEL);
1043 if (p == NULL) {
1044 i5000_printk(KERN_ERR, "MC: %s:%s() kmalloc() failed\n",
1045 __FILE__, __func__);
1046 return;
1047 }
1048
1049 n = snprintf(p, space, "\n");
1050 p += n;
1051 space -= n;
1052
1053 /* Scan all the actual CSROWS (which is # of DIMMS * 2)
1054 * and calculate the information for each DIMM
1055 * Start with the highest csrow first, to display it first
1056 * and work toward the 0th csrow
1057 */
1058 max_csrows = pvt->maxdimmperch * 2;
1059 for (csrow = max_csrows - 1; csrow >= 0; csrow--) {
1060
1061 /* on an odd csrow, first output a 'boundary' marker,
1062 * then reset the message buffer */
1063 if (csrow & 0x1) {
1064 n = snprintf(p, space, "---------------------------"
1065 "--------------------------------");
1066 p += n;
1067 space -= n;
1068 debugf2("%s\n", mem_buffer);
1069 p = mem_buffer;
1070 space = PAGE_SIZE;
1071 }
1072 n = snprintf(p, space, "csrow %2d ", csrow);
1073 p += n;
1074 space -= n;
1075
1076 for (channel = 0; channel < pvt->maxch; channel++) {
1077 dinfo = &pvt->dimm_info[csrow][channel];
1078 handle_channel(pvt, csrow, channel, dinfo);
1079 n = snprintf(p, space, "%4d MB | ", dinfo->megabytes);
1080 p += n;
1081 space -= n;
1082 }
1083 n = snprintf(p, space, "\n");
1084 p += n;
1085 space -= n;
1086 }
1087
1088 /* Output the last bottom 'boundary' marker */
1089 n = snprintf(p, space, "---------------------------"
1090 "--------------------------------\n");
1091 p += n;
1092 space -= n;
1093
1094 /* now output the 'channel' labels */
1095 n = snprintf(p, space, " ");
1096 p += n;
1097 space -= n;
1098 for (channel = 0; channel < pvt->maxch; channel++) {
1099 n = snprintf(p, space, "channel %d | ", channel);
1100 p += n;
1101 space -= n;
1102 }
1103 n = snprintf(p, space, "\n");
1104 p += n;
1105 space -= n;
1106
1107 /* output the last message and free buffer */
1108 debugf2("%s\n", mem_buffer);
1109 kfree(mem_buffer);
1110 }
1111
1112 /*
1113 * i5000_get_mc_regs read in the necessary registers and
1114 * cache locally
1115 *
1116 * Fills in the private data members
1117 */
1118 static void i5000_get_mc_regs(struct mem_ctl_info *mci)
1119 {
1120 struct i5000_pvt *pvt;
1121 u32 actual_tolm;
1122 u16 limit;
1123 int slot_row;
1124 int maxch;
1125 int maxdimmperch;
1126 int way0, way1;
1127
1128 pvt = mci->pvt_info;
1129
1130 pci_read_config_dword(pvt->system_address, AMBASE,
1131 (u32 *) & pvt->ambase);
1132 pci_read_config_dword(pvt->system_address, AMBASE + sizeof(u32),
1133 ((u32 *) & pvt->ambase) + sizeof(u32));
1134
1135 maxdimmperch = pvt->maxdimmperch;
1136 maxch = pvt->maxch;
1137
1138 debugf2("AMBASE= 0x%lx MAXCH= %d MAX-DIMM-Per-CH= %d\n",
1139 (long unsigned int)pvt->ambase, pvt->maxch, pvt->maxdimmperch);
1140
1141 /* Get the Branch Map regs */
1142 pci_read_config_word(pvt->branchmap_werrors, TOLM, &pvt->tolm);
1143 pvt->tolm >>= 12;
1144 debugf2("\nTOLM (number of 256M regions) =%u (0x%x)\n", pvt->tolm,
1145 pvt->tolm);
1146
1147 actual_tolm = pvt->tolm << 28;
1148 debugf2("Actual TOLM byte addr=%u (0x%x)\n", actual_tolm, actual_tolm);
1149
1150 pci_read_config_word(pvt->branchmap_werrors, MIR0, &pvt->mir0);
1151 pci_read_config_word(pvt->branchmap_werrors, MIR1, &pvt->mir1);
1152 pci_read_config_word(pvt->branchmap_werrors, MIR2, &pvt->mir2);
1153
1154 /* Get the MIR[0-2] regs */
1155 limit = (pvt->mir0 >> 4) & 0x0FFF;
1156 way0 = pvt->mir0 & 0x1;
1157 way1 = pvt->mir0 & 0x2;
1158 debugf2("MIR0: limit= 0x%x WAY1= %u WAY0= %x\n", limit, way1, way0);
1159 limit = (pvt->mir1 >> 4) & 0x0FFF;
1160 way0 = pvt->mir1 & 0x1;
1161 way1 = pvt->mir1 & 0x2;
1162 debugf2("MIR1: limit= 0x%x WAY1= %u WAY0= %x\n", limit, way1, way0);
1163 limit = (pvt->mir2 >> 4) & 0x0FFF;
1164 way0 = pvt->mir2 & 0x1;
1165 way1 = pvt->mir2 & 0x2;
1166 debugf2("MIR2: limit= 0x%x WAY1= %u WAY0= %x\n", limit, way1, way0);
1167
1168 /* Get the MTR[0-3] regs */
1169 for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) {
1170 int where = MTR0 + (slot_row * sizeof(u32));
1171
1172 pci_read_config_word(pvt->branch_0, where,
1173 &pvt->b0_mtr[slot_row]);
1174
1175 debugf2("MTR%d where=0x%x B0 value=0x%x\n", slot_row, where,
1176 pvt->b0_mtr[slot_row]);
1177
1178 if (pvt->maxch >= CHANNELS_PER_BRANCH) {
1179 pci_read_config_word(pvt->branch_1, where,
1180 &pvt->b1_mtr[slot_row]);
1181 debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row,
1182 where, pvt->b0_mtr[slot_row]);
1183 } else {
1184 pvt->b1_mtr[slot_row] = 0;
1185 }
1186 }
1187
1188 /* Read and dump branch 0's MTRs */
1189 debugf2("\nMemory Technology Registers:\n");
1190 debugf2(" Branch 0:\n");
1191 for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) {
1192 decode_mtr(slot_row, pvt->b0_mtr[slot_row]);
1193 }
1194 pci_read_config_word(pvt->branch_0, AMB_PRESENT_0,
1195 &pvt->b0_ambpresent0);
1196 debugf2("\t\tAMB-Branch 0-present0 0x%x:\n", pvt->b0_ambpresent0);
1197 pci_read_config_word(pvt->branch_0, AMB_PRESENT_1,
1198 &pvt->b0_ambpresent1);
1199 debugf2("\t\tAMB-Branch 0-present1 0x%x:\n", pvt->b0_ambpresent1);
1200
1201 /* Only if we have 2 branchs (4 channels) */
1202 if (pvt->maxch < CHANNELS_PER_BRANCH) {
1203 pvt->b1_ambpresent0 = 0;
1204 pvt->b1_ambpresent1 = 0;
1205 } else {
1206 /* Read and dump branch 1's MTRs */
1207 debugf2(" Branch 1:\n");
1208 for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) {
1209 decode_mtr(slot_row, pvt->b1_mtr[slot_row]);
1210 }
1211 pci_read_config_word(pvt->branch_1, AMB_PRESENT_0,
1212 &pvt->b1_ambpresent0);
1213 debugf2("\t\tAMB-Branch 1-present0 0x%x:\n",
1214 pvt->b1_ambpresent0);
1215 pci_read_config_word(pvt->branch_1, AMB_PRESENT_1,
1216 &pvt->b1_ambpresent1);
1217 debugf2("\t\tAMB-Branch 1-present1 0x%x:\n",
1218 pvt->b1_ambpresent1);
1219 }
1220
1221 /* Go and determine the size of each DIMM and place in an
1222 * orderly matrix */
1223 calculate_dimm_size(pvt);
1224 }
1225
1226 /*
1227 * i5000_init_csrows Initialize the 'csrows' table within
1228 * the mci control structure with the
1229 * addressing of memory.
1230 *
1231 * return:
1232 * 0 success
1233 * 1 no actual memory found on this MC
1234 */
1235 static int i5000_init_csrows(struct mem_ctl_info *mci)
1236 {
1237 struct i5000_pvt *pvt;
1238 struct csrow_info *p_csrow;
1239 int empty, channel_count;
1240 int max_csrows;
1241 int mtr;
1242 int csrow_megs;
1243 int channel;
1244 int csrow;
1245
1246 pvt = mci->pvt_info;
1247
1248 channel_count = pvt->maxch;
1249 max_csrows = pvt->maxdimmperch * 2;
1250
1251 empty = 1; /* Assume NO memory */
1252
1253 for (csrow = 0; csrow < max_csrows; csrow++) {
1254 p_csrow = &mci->csrows[csrow];
1255
1256 p_csrow->csrow_idx = csrow;
1257
1258 /* use branch 0 for the basis */
1259 mtr = pvt->b0_mtr[csrow >> 1];
1260
1261 /* if no DIMMS on this row, continue */
1262 if (!MTR_DIMMS_PRESENT(mtr))
1263 continue;
1264
1265 /* FAKE OUT VALUES, FIXME */
1266 p_csrow->first_page = 0 + csrow * 20;
1267 p_csrow->last_page = 9 + csrow * 20;
1268 p_csrow->page_mask = 0xFFF;
1269
1270 p_csrow->grain = 8;
1271
1272 csrow_megs = 0;
1273 for (channel = 0; channel < pvt->maxch; channel++) {
1274 csrow_megs += pvt->dimm_info[csrow][channel].megabytes;
1275 }
1276
1277 p_csrow->nr_pages = csrow_megs << 8;
1278
1279 /* Assume DDR2 for now */
1280 p_csrow->mtype = MEM_FB_DDR2;
1281
1282 /* ask what device type on this row */
1283 if (MTR_DRAM_WIDTH(mtr))
1284 p_csrow->dtype = DEV_X8;
1285 else
1286 p_csrow->dtype = DEV_X4;
1287
1288 p_csrow->edac_mode = EDAC_S8ECD8ED;
1289
1290 empty = 0;
1291 }
1292
1293 return empty;
1294 }
1295
1296 /*
1297 * i5000_enable_error_reporting
1298 * Turn on the memory reporting features of the hardware
1299 */
1300 static void i5000_enable_error_reporting(struct mem_ctl_info *mci)
1301 {
1302 struct i5000_pvt *pvt;
1303 u32 fbd_error_mask;
1304
1305 pvt = mci->pvt_info;
1306
1307 /* Read the FBD Error Mask Register */
1308 pci_read_config_dword(pvt->branchmap_werrors, EMASK_FBD,
1309 &fbd_error_mask);
1310
1311 /* Enable with a '' */
1312 fbd_error_mask &= ~(ENABLE_EMASK_ALL);
1313
1314 pci_write_config_dword(pvt->branchmap_werrors, EMASK_FBD,
1315 fbd_error_mask);
1316 }
1317
1318 /*
1319 * i5000_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels)
1320 *
1321 * ask the device how many channels are present and how many CSROWS
1322 * as well
1323 */
1324 static void i5000_get_dimm_and_channel_counts(struct pci_dev *pdev,
1325 int *num_dimms_per_channel,
1326 int *num_channels)
1327 {
1328 u8 value;
1329
1330 /* Need to retrieve just how many channels and dimms per channel are
1331 * supported on this memory controller
1332 */
1333 pci_read_config_byte(pdev, MAXDIMMPERCH, &value);
1334 *num_dimms_per_channel = (int)value *2;
1335
1336 pci_read_config_byte(pdev, MAXCH, &value);
1337 *num_channels = (int)value;
1338 }
1339
1340 /*
1341 * i5000_probe1 Probe for ONE instance of device to see if it is
1342 * present.
1343 * return:
1344 * 0 for FOUND a device
1345 * < 0 for error code
1346 */
1347 static int i5000_probe1(struct pci_dev *pdev, int dev_idx)
1348 {
1349 struct mem_ctl_info *mci;
1350 struct i5000_pvt *pvt;
1351 int num_channels;
1352 int num_dimms_per_channel;
1353 int num_csrows;
1354
1355 debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
1356 __func__,
1357 pdev->bus->number,
1358 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
1359
1360 /* We only are looking for func 0 of the set */
1361 if (PCI_FUNC(pdev->devfn) != 0)
1362 return -ENODEV;
1363
1364 /* Ask the devices for the number of CSROWS and CHANNELS so
1365 * that we can calculate the memory resources, etc
1366 *
1367 * The Chipset will report what it can handle which will be greater
1368 * or equal to what the motherboard manufacturer will implement.
1369 *
1370 * As we don't have a motherboard identification routine to determine
1371 * actual number of slots/dimms per channel, we thus utilize the
1372 * resource as specified by the chipset. Thus, we might have
1373 * have more DIMMs per channel than actually on the mobo, but this
1374 * allows the driver to support upto the chipset max, without
1375 * some fancy mobo determination.
1376 */
1377 i5000_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
1378 &num_channels);
1379 num_csrows = num_dimms_per_channel * 2;
1380
1381 debugf0("MC: %s(): Number of - Channels= %d DIMMS= %d CSROWS= %d\n",
1382 __func__, num_channels, num_dimms_per_channel, num_csrows);
1383
1384 /* allocate a new MC control structure */
1385 mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels, 0);
1386
1387 if (mci == NULL)
1388 return -ENOMEM;
1389
1390 kobject_get(&mci->edac_mci_kobj);
1391 debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
1392
1393 mci->dev = &pdev->dev; /* record ptr to the generic device */
1394
1395 pvt = mci->pvt_info;
1396 pvt->system_address = pdev; /* Record this device in our private */
1397 pvt->maxch = num_channels;
1398 pvt->maxdimmperch = num_dimms_per_channel;
1399
1400 /* 'get' the pci devices we want to reserve for our use */
1401 if (i5000_get_devices(mci, dev_idx))
1402 goto fail0;
1403
1404 /* Time to get serious */
1405 i5000_get_mc_regs(mci); /* retrieve the hardware registers */
1406
1407 mci->mc_idx = 0;
1408 mci->mtype_cap = MEM_FLAG_FB_DDR2;
1409 mci->edac_ctl_cap = EDAC_FLAG_NONE;
1410 mci->edac_cap = EDAC_FLAG_NONE;
1411 mci->mod_name = "i5000_edac.c";
1412 mci->mod_ver = I5000_REVISION;
1413 mci->ctl_name = i5000_devs[dev_idx].ctl_name;
1414 mci->dev_name = pci_name(pdev);
1415 mci->ctl_page_to_phys = NULL;
1416
1417 /* Set the function pointer to an actual operation function */
1418 mci->edac_check = i5000_check_error;
1419
1420 /* initialize the MC control structure 'csrows' table
1421 * with the mapping and control information */
1422 if (i5000_init_csrows(mci)) {
1423 debugf0("MC: Setting mci->edac_cap to EDAC_FLAG_NONE\n"
1424 " because i5000_init_csrows() returned nonzero "
1425 "value\n");
1426 mci->edac_cap = EDAC_FLAG_NONE; /* no csrows found */
1427 } else {
1428 debugf1("MC: Enable error reporting now\n");
1429 i5000_enable_error_reporting(mci);
1430 }
1431
1432 /* add this new MC control structure to EDAC's list of MCs */
1433 if (edac_mc_add_mc(mci)) {
1434 debugf0("MC: " __FILE__
1435 ": %s(): failed edac_mc_add_mc()\n", __func__);
1436 /* FIXME: perhaps some code should go here that disables error
1437 * reporting if we just enabled it
1438 */
1439 goto fail1;
1440 }
1441
1442 i5000_clear_error(mci);
1443
1444 /* allocating generic PCI control info */
1445 i5000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
1446 if (!i5000_pci) {
1447 printk(KERN_WARNING
1448 "%s(): Unable to create PCI control\n",
1449 __func__);
1450 printk(KERN_WARNING
1451 "%s(): PCI error report via EDAC not setup\n",
1452 __func__);
1453 }
1454
1455 return 0;
1456
1457 /* Error exit unwinding stack */
1458 fail1:
1459
1460 i5000_put_devices(mci);
1461
1462 fail0:
1463 kobject_put(&mci->edac_mci_kobj);
1464 edac_mc_free(mci);
1465 return -ENODEV;
1466 }
1467
1468 /*
1469 * i5000_init_one constructor for one instance of device
1470 *
1471 * returns:
1472 * negative on error
1473 * count (>= 0)
1474 */
1475 static int __devinit i5000_init_one(struct pci_dev *pdev,
1476 const struct pci_device_id *id)
1477 {
1478 int rc;
1479
1480 debugf0("MC: " __FILE__ ": %s()\n", __func__);
1481
1482 /* wake up device */
1483 rc = pci_enable_device(pdev);
1484 if (rc == -EIO)
1485 return rc;
1486
1487 /* now probe and enable the device */
1488 return i5000_probe1(pdev, id->driver_data);
1489 }
1490
1491 /*
1492 * i5000_remove_one destructor for one instance of device
1493 *
1494 */
1495 static void __devexit i5000_remove_one(struct pci_dev *pdev)
1496 {
1497 struct mem_ctl_info *mci;
1498
1499 debugf0(__FILE__ ": %s()\n", __func__);
1500
1501 if (i5000_pci)
1502 edac_pci_release_generic_ctl(i5000_pci);
1503
1504 if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
1505 return;
1506
1507 /* retrieve references to resources, and free those resources */
1508 i5000_put_devices(mci);
1509 kobject_put(&mci->edac_mci_kobj);
1510 edac_mc_free(mci);
1511 }
1512
1513 /*
1514 * pci_device_id table for which devices we are looking for
1515 *
1516 * The "E500P" device is the first device supported.
1517 */
1518 static const struct pci_device_id i5000_pci_tbl[] __devinitdata = {
1519 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I5000_DEV16),
1520 .driver_data = I5000P},
1521
1522 {0,} /* 0 terminated list. */
1523 };
1524
1525 MODULE_DEVICE_TABLE(pci, i5000_pci_tbl);
1526
1527 /*
1528 * i5000_driver pci_driver structure for this module
1529 *
1530 */
1531 static struct pci_driver i5000_driver = {
1532 .name = KBUILD_BASENAME,
1533 .probe = i5000_init_one,
1534 .remove = __devexit_p(i5000_remove_one),
1535 .id_table = i5000_pci_tbl,
1536 };
1537
1538 /*
1539 * i5000_init Module entry function
1540 * Try to initialize this module for its devices
1541 */
1542 static int __init i5000_init(void)
1543 {
1544 int pci_rc;
1545
1546 debugf2("MC: " __FILE__ ": %s()\n", __func__);
1547
1548 /* Ensure that the OPSTATE is set correctly for POLL or NMI */
1549 opstate_init();
1550
1551 pci_rc = pci_register_driver(&i5000_driver);
1552
1553 return (pci_rc < 0) ? pci_rc : 0;
1554 }
1555
1556 /*
1557 * i5000_exit() Module exit function
1558 * Unregister the driver
1559 */
1560 static void __exit i5000_exit(void)
1561 {
1562 debugf2("MC: " __FILE__ ": %s()\n", __func__);
1563 pci_unregister_driver(&i5000_driver);
1564 }
1565
1566 module_init(i5000_init);
1567 module_exit(i5000_exit);
1568
1569 MODULE_LICENSE("GPL");
1570 MODULE_AUTHOR
1571 ("Linux Networx (http://lnxi.com) Doug Thompson <norsk5@xmission.com>");
1572 MODULE_DESCRIPTION("MC Driver for Intel I5000 memory controllers - "
1573 I5000_REVISION);
1574
1575 module_param(edac_op_state, int, 0444);
1576 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
1577 module_param(misc_messages, int, 0444);
1578 MODULE_PARM_DESC(misc_messages, "Log miscellaneous non fatal messages");
1579
1580
|
This page was automatically generated by the
LXR engine.
|