Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /******************************************************************************
  2  *
  3  * Module Name: utdebug - Debug print routines
  4  *
  5  *****************************************************************************/
  6 
  7 /*
  8  * Copyright (C) 2000 - 2007, R. Byron Moore
  9  * All rights reserved.
 10  *
 11  * Redistribution and use in source and binary forms, with or without
 12  * modification, are permitted provided that the following conditions
 13  * are met:
 14  * 1. Redistributions of source code must retain the above copyright
 15  *    notice, this list of conditions, and the following disclaimer,
 16  *    without modification.
 17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 18  *    substantially similar to the "NO WARRANTY" disclaimer below
 19  *    ("Disclaimer") and any redistribution must be conditioned upon
 20  *    including a substantially similar Disclaimer requirement for further
 21  *    binary redistribution.
 22  * 3. Neither the names of the above-listed copyright holders nor the names
 23  *    of any contributors may be used to endorse or promote products derived
 24  *    from this software without specific prior written permission.
 25  *
 26  * Alternatively, this software may be distributed under the terms of the
 27  * GNU General Public License ("GPL") version 2 as published by the Free
 28  * Software Foundation.
 29  *
 30  * NO WARRANTY
 31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 41  * POSSIBILITY OF SUCH DAMAGES.
 42  */
 43 
 44 #include <acpi/acpi.h>
 45 
 46 #define _COMPONENT          ACPI_UTILITIES
 47 ACPI_MODULE_NAME("utdebug")
 48 #ifdef ACPI_DEBUG_OUTPUT
 49 static acpi_thread_id acpi_gbl_prev_thread_id;
 50 static char *acpi_gbl_fn_entry_str = "----Entry";
 51 static char *acpi_gbl_fn_exit_str = "----Exit-";
 52 
 53 /* Local prototypes */
 54 
 55 static const char *acpi_ut_trim_function_name(const char *function_name);
 56 
 57 /*******************************************************************************
 58  *
 59  * FUNCTION:    acpi_ut_init_stack_ptr_trace
 60  *
 61  * PARAMETERS:  None
 62  *
 63  * RETURN:      None
 64  *
 65  * DESCRIPTION: Save the current CPU stack pointer at subsystem startup
 66  *
 67  ******************************************************************************/
 68 
 69 void acpi_ut_init_stack_ptr_trace(void)
 70 {
 71         u32 current_sp;
 72 
 73         acpi_gbl_entry_stack_pointer = ACPI_PTR_DIFF(&current_sp, NULL);
 74 }
 75 
 76 /*******************************************************************************
 77  *
 78  * FUNCTION:    acpi_ut_track_stack_ptr
 79  *
 80  * PARAMETERS:  None
 81  *
 82  * RETURN:      None
 83  *
 84  * DESCRIPTION: Save the current CPU stack pointer
 85  *
 86  ******************************************************************************/
 87 
 88 void acpi_ut_track_stack_ptr(void)
 89 {
 90         acpi_size current_sp;
 91 
 92         current_sp = ACPI_PTR_DIFF(&current_sp, NULL);
 93 
 94         if (current_sp < acpi_gbl_lowest_stack_pointer) {
 95                 acpi_gbl_lowest_stack_pointer = current_sp;
 96         }
 97 
 98         if (acpi_gbl_nesting_level > acpi_gbl_deepest_nesting) {
 99                 acpi_gbl_deepest_nesting = acpi_gbl_nesting_level;
100         }
101 }
102 
103 /*******************************************************************************
104  *
105  * FUNCTION:    acpi_ut_trim_function_name
106  *
107  * PARAMETERS:  function_name       - Ascii string containing a procedure name
108  *
109  * RETURN:      Updated pointer to the function name
110  *
111  * DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
112  *              This allows compiler macros such as __func__ to be used
113  *              with no change to the debug output.
114  *
115  ******************************************************************************/
116 
117 static const char *acpi_ut_trim_function_name(const char *function_name)
118 {
119 
120         /* All Function names are longer than 4 chars, check is safe */
121 
122         if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_MIXED) {
123 
124                 /* This is the case where the original source has not been modified */
125 
126                 return (function_name + 4);
127         }
128 
129         if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_LOWER) {
130 
131                 /* This is the case where the source has been 'linuxized' */
132 
133                 return (function_name + 5);
134         }
135 
136         return (function_name);
137 }
138 
139 /*******************************************************************************
140  *
141  * FUNCTION:    acpi_ut_debug_print
142  *
143  * PARAMETERS:  requested_debug_level - Requested debug print level
144  *              line_number         - Caller's line number (for error output)
145  *              function_name       - Caller's procedure name
146  *              module_name         - Caller's module name
147  *              component_id        - Caller's component ID
148  *              Format              - Printf format field
149  *              ...                 - Optional printf arguments
150  *
151  * RETURN:      None
152  *
153  * DESCRIPTION: Print error message with prefix consisting of the module name,
154  *              line number, and component ID.
155  *
156  ******************************************************************************/
157 
158 void ACPI_INTERNAL_VAR_XFACE
159 acpi_ut_debug_print(u32 requested_debug_level,
160                     u32 line_number,
161                     const char *function_name,
162                     char *module_name, u32 component_id, char *format, ...)
163 {
164         acpi_thread_id thread_id;
165         va_list args;
166 
167         /*
168          * Stay silent if the debug level or component ID is disabled
169          */
170         if (!(requested_debug_level & acpi_dbg_level) ||
171             !(component_id & acpi_dbg_layer)) {
172                 return;
173         }
174 
175         /*
176          * Thread tracking and context switch notification
177          */
178         thread_id = acpi_os_get_thread_id();
179         if (thread_id != acpi_gbl_prev_thread_id) {
180                 if (ACPI_LV_THREADS & acpi_dbg_level) {
181                         acpi_os_printf
182                             ("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
183                              (unsigned long)acpi_gbl_prev_thread_id,
184                              (unsigned long)thread_id);
185                 }
186 
187                 acpi_gbl_prev_thread_id = thread_id;
188         }
189 
190         /*
191          * Display the module name, current line number, thread ID (if requested),
192          * current procedure nesting level, and the current procedure name
193          */
194         acpi_os_printf("%8s-%04ld ", module_name, line_number);
195 
196         if (ACPI_LV_THREADS & acpi_dbg_level) {
197                 acpi_os_printf("[%04lX] ", (unsigned long)thread_id);
198         }
199 
200         acpi_os_printf("[%02ld] %-22.22s: ",
201                        acpi_gbl_nesting_level,
202                        acpi_ut_trim_function_name(function_name));
203 
204         va_start(args, format);
205         acpi_os_vprintf(format, args);
206 }
207 
208 ACPI_EXPORT_SYMBOL(acpi_ut_debug_print)
209 
210 /*******************************************************************************
211  *
212  * FUNCTION:    acpi_ut_debug_print_raw
213  *
214  * PARAMETERS:  requested_debug_level - Requested debug print level
215  *              line_number         - Caller's line number
216  *              function_name       - Caller's procedure name
217  *              module_name         - Caller's module name
218  *              component_id        - Caller's component ID
219  *              Format              - Printf format field
220  *              ...                 - Optional printf arguments
221  *
222  * RETURN:      None
223  *
224  * DESCRIPTION: Print message with no headers.  Has same interface as
225  *              debug_print so that the same macros can be used.
226  *
227  ******************************************************************************/
228 void ACPI_INTERNAL_VAR_XFACE
229 acpi_ut_debug_print_raw(u32 requested_debug_level,
230                         u32 line_number,
231                         const char *function_name,
232                         char *module_name, u32 component_id, char *format, ...)
233 {
234         va_list args;
235 
236         if (!(requested_debug_level & acpi_dbg_level) ||
237             !(component_id & acpi_dbg_layer)) {
238                 return;
239         }
240 
241         va_start(args, format);
242         acpi_os_vprintf(format, args);
243 }
244 
245 ACPI_EXPORT_SYMBOL(acpi_ut_debug_print_raw)
246 
247 /*******************************************************************************
248  *
249  * FUNCTION:    acpi_ut_trace
250  *
251  * PARAMETERS:  line_number         - Caller's line number
252  *              function_name       - Caller's procedure name
253  *              module_name         - Caller's module name
254  *              component_id        - Caller's component ID
255  *
256  * RETURN:      None
257  *
258  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
259  *              set in debug_level
260  *
261  ******************************************************************************/
262 void
263 acpi_ut_trace(u32 line_number,
264               const char *function_name, char *module_name, u32 component_id)
265 {
266 
267         acpi_gbl_nesting_level++;
268         acpi_ut_track_stack_ptr();
269 
270         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
271                             line_number, function_name, module_name,
272                             component_id, "%s\n", acpi_gbl_fn_entry_str);
273 }
274 
275 ACPI_EXPORT_SYMBOL(acpi_ut_trace)
276 
277 /*******************************************************************************
278  *
279  * FUNCTION:    acpi_ut_trace_ptr
280  *
281  * PARAMETERS:  line_number         - Caller's line number
282  *              function_name       - Caller's procedure name
283  *              module_name         - Caller's module name
284  *              component_id        - Caller's component ID
285  *              Pointer             - Pointer to display
286  *
287  * RETURN:      None
288  *
289  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
290  *              set in debug_level
291  *
292  ******************************************************************************/
293 void
294 acpi_ut_trace_ptr(u32 line_number,
295                   const char *function_name,
296                   char *module_name, u32 component_id, void *pointer)
297 {
298         acpi_gbl_nesting_level++;
299         acpi_ut_track_stack_ptr();
300 
301         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
302                             line_number, function_name, module_name,
303                             component_id, "%s %p\n", acpi_gbl_fn_entry_str,
304                             pointer);
305 }
306 
307 /*******************************************************************************
308  *
309  * FUNCTION:    acpi_ut_trace_str
310  *
311  * PARAMETERS:  line_number         - Caller's line number
312  *              function_name       - Caller's procedure name
313  *              module_name         - Caller's module name
314  *              component_id        - Caller's component ID
315  *              String              - Additional string to display
316  *
317  * RETURN:      None
318  *
319  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
320  *              set in debug_level
321  *
322  ******************************************************************************/
323 
324 void
325 acpi_ut_trace_str(u32 line_number,
326                   const char *function_name,
327                   char *module_name, u32 component_id, char *string)
328 {
329 
330         acpi_gbl_nesting_level++;
331         acpi_ut_track_stack_ptr();
332 
333         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
334                             line_number, function_name, module_name,
335                             component_id, "%s %s\n", acpi_gbl_fn_entry_str,
336                             string);
337 }
338 
339 /*******************************************************************************
340  *
341  * FUNCTION:    acpi_ut_trace_u32
342  *
343  * PARAMETERS:  line_number         - Caller's line number
344  *              function_name       - Caller's procedure name
345  *              module_name         - Caller's module name
346  *              component_id        - Caller's component ID
347  *              Integer             - Integer to display
348  *
349  * RETURN:      None
350  *
351  * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
352  *              set in debug_level
353  *
354  ******************************************************************************/
355 
356 void
357 acpi_ut_trace_u32(u32 line_number,
358                   const char *function_name,
359                   char *module_name, u32 component_id, u32 integer)
360 {
361 
362         acpi_gbl_nesting_level++;
363         acpi_ut_track_stack_ptr();
364 
365         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
366                             line_number, function_name, module_name,
367                             component_id, "%s %08X\n", acpi_gbl_fn_entry_str,
368                             integer);
369 }
370 
371 /*******************************************************************************
372  *
373  * FUNCTION:    acpi_ut_exit
374  *
375  * PARAMETERS:  line_number         - Caller's line number
376  *              function_name       - Caller's procedure name
377  *              module_name         - Caller's module name
378  *              component_id        - Caller's component ID
379  *
380  * RETURN:      None
381  *
382  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
383  *              set in debug_level
384  *
385  ******************************************************************************/
386 
387 void
388 acpi_ut_exit(u32 line_number,
389              const char *function_name, char *module_name, u32 component_id)
390 {
391 
392         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
393                             line_number, function_name, module_name,
394                             component_id, "%s\n", acpi_gbl_fn_exit_str);
395 
396         acpi_gbl_nesting_level--;
397 }
398 
399 ACPI_EXPORT_SYMBOL(acpi_ut_exit)
400 
401 /*******************************************************************************
402  *
403  * FUNCTION:    acpi_ut_status_exit
404  *
405  * PARAMETERS:  line_number         - Caller's line number
406  *              function_name       - Caller's procedure name
407  *              module_name         - Caller's module name
408  *              component_id        - Caller's component ID
409  *              Status              - Exit status code
410  *
411  * RETURN:      None
412  *
413  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
414  *              set in debug_level. Prints exit status also.
415  *
416  ******************************************************************************/
417 void
418 acpi_ut_status_exit(u32 line_number,
419                     const char *function_name,
420                     char *module_name, u32 component_id, acpi_status status)
421 {
422 
423         if (ACPI_SUCCESS(status)) {
424                 acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
425                                     line_number, function_name, module_name,
426                                     component_id, "%s %s\n",
427                                     acpi_gbl_fn_exit_str,
428                                     acpi_format_exception(status));
429         } else {
430                 acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
431                                     line_number, function_name, module_name,
432                                     component_id, "%s ****Exception****: %s\n",
433                                     acpi_gbl_fn_exit_str,
434                                     acpi_format_exception(status));
435         }
436 
437         acpi_gbl_nesting_level--;
438 }
439 
440 ACPI_EXPORT_SYMBOL(acpi_ut_status_exit)
441 
442 /*******************************************************************************
443  *
444  * FUNCTION:    acpi_ut_value_exit
445  *
446  * PARAMETERS:  line_number         - Caller's line number
447  *              function_name       - Caller's procedure name
448  *              module_name         - Caller's module name
449  *              component_id        - Caller's component ID
450  *              Value               - Value to be printed with exit msg
451  *
452  * RETURN:      None
453  *
454  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
455  *              set in debug_level. Prints exit value also.
456  *
457  ******************************************************************************/
458 void
459 acpi_ut_value_exit(u32 line_number,
460                    const char *function_name,
461                    char *module_name, u32 component_id, acpi_integer value)
462 {
463 
464         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
465                             line_number, function_name, module_name,
466                             component_id, "%s %8.8X%8.8X\n",
467                             acpi_gbl_fn_exit_str, ACPI_FORMAT_UINT64(value));
468 
469         acpi_gbl_nesting_level--;
470 }
471 
472 ACPI_EXPORT_SYMBOL(acpi_ut_value_exit)
473 
474 /*******************************************************************************
475  *
476  * FUNCTION:    acpi_ut_ptr_exit
477  *
478  * PARAMETERS:  line_number         - Caller's line number
479  *              function_name       - Caller's procedure name
480  *              module_name         - Caller's module name
481  *              component_id        - Caller's component ID
482  *              Ptr                 - Pointer to display
483  *
484  * RETURN:      None
485  *
486  * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
487  *              set in debug_level. Prints exit value also.
488  *
489  ******************************************************************************/
490 void
491 acpi_ut_ptr_exit(u32 line_number,
492                  const char *function_name,
493                  char *module_name, u32 component_id, u8 * ptr)
494 {
495 
496         acpi_ut_debug_print(ACPI_LV_FUNCTIONS,
497                             line_number, function_name, module_name,
498                             component_id, "%s %p\n", acpi_gbl_fn_exit_str, ptr);
499 
500         acpi_gbl_nesting_level--;
501 }
502 
503 #endif
504 
505 /*******************************************************************************
506  *
507  * FUNCTION:    acpi_ut_dump_buffer
508  *
509  * PARAMETERS:  Buffer              - Buffer to dump
510  *              Count               - Amount to dump, in bytes
511  *              Display             - BYTE, WORD, DWORD, or QWORD display
512  *              component_iD        - Caller's component ID
513  *
514  * RETURN:      None
515  *
516  * DESCRIPTION: Generic dump buffer in both hex and ascii.
517  *
518  ******************************************************************************/
519 
520 void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
521 {
522         acpi_native_uint i = 0;
523         acpi_native_uint j;
524         u32 temp32;
525         u8 buf_char;
526 
527         if ((count < 4) || (count & 0x01)) {
528                 display = DB_BYTE_DISPLAY;
529         }
530 
531         /* Nasty little dump buffer routine! */
532 
533         while (i < count) {
534 
535                 /* Print current offset */
536 
537                 acpi_os_printf("%6.4X: ", (u32) i);
538 
539                 /* Print 16 hex chars */
540 
541                 for (j = 0; j < 16;) {
542                         if (i + j >= count) {
543 
544                                 /* Dump fill spaces */
545 
546                                 acpi_os_printf("%*s", ((display * 2) + 1), " ");
547                                 j += (acpi_native_uint) display;
548                                 continue;
549                         }
550 
551                         switch (display) {
552                         case DB_BYTE_DISPLAY:
553                         default:        /* Default is BYTE display */
554 
555                                 acpi_os_printf("%02X ", buffer[i + j]);
556                                 break;
557 
558                         case DB_WORD_DISPLAY:
559 
560                                 ACPI_MOVE_16_TO_32(&temp32, &buffer[i + j]);
561                                 acpi_os_printf("%04X ", temp32);
562                                 break;
563 
564                         case DB_DWORD_DISPLAY:
565 
566                                 ACPI_MOVE_32_TO_32(&temp32, &buffer[i + j]);
567                                 acpi_os_printf("%08X ", temp32);
568                                 break;
569 
570                         case DB_QWORD_DISPLAY:
571 
572                                 ACPI_MOVE_32_TO_32(&temp32, &buffer[i + j]);
573                                 acpi_os_printf("%08X", temp32);
574 
575                                 ACPI_MOVE_32_TO_32(&temp32, &buffer[i + j + 4]);
576                                 acpi_os_printf("%08X ", temp32);
577                                 break;
578                         }
579 
580                         j += (acpi_native_uint) display;
581                 }
582 
583                 /*
584                  * Print the ASCII equivalent characters but watch out for the bad
585                  * unprintable ones (printable chars are 0x20 through 0x7E)
586                  */
587                 acpi_os_printf(" ");
588                 for (j = 0; j < 16; j++) {
589                         if (i + j >= count) {
590                                 acpi_os_printf("\n");
591                                 return;
592                         }
593 
594                         buf_char = buffer[i + j];
595                         if (ACPI_IS_PRINT(buf_char)) {
596                                 acpi_os_printf("%c", buf_char);
597                         } else {
598                                 acpi_os_printf(".");
599                         }
600                 }
601 
602                 /* Done with that line. */
603 
604                 acpi_os_printf("\n");
605                 i += 16;
606         }
607 
608         return;
609 }
610 
611 /*******************************************************************************
612  *
613  * FUNCTION:    acpi_ut_dump_buffer
614  *
615  * PARAMETERS:  Buffer              - Buffer to dump
616  *              Count               - Amount to dump, in bytes
617  *              Display             - BYTE, WORD, DWORD, or QWORD display
618  *              component_iD        - Caller's component ID
619  *
620  * RETURN:      None
621  *
622  * DESCRIPTION: Generic dump buffer in both hex and ascii.
623  *
624  ******************************************************************************/
625 
626 void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
627 {
628 
629         /* Only dump the buffer if tracing is enabled */
630 
631         if (!((ACPI_LV_TABLES & acpi_dbg_level) &&
632               (component_id & acpi_dbg_layer))) {
633                 return;
634         }
635 
636         acpi_ut_dump_buffer2(buffer, count, display);
637 }
638 
  This page was automatically generated by the LXR engine.