Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * linux/arch/arm/mach-omap1/board-voiceblue.c
  3  *
  4  * Modified from board-generic.c
  5  *
  6  * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
  7  *
  8  * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
  9  *
 10  * This program is free software; you can redistribute it and/or modify
 11  * it under the terms of the GNU General Public License version 2 as
 12  * published by the Free Software Foundation.
 13  */
 14 
 15 #include <linux/delay.h>
 16 #include <linux/platform_device.h>
 17 #include <linux/interrupt.h>
 18 #include <linux/irq.h>
 19 #include <linux/init.h>
 20 #include <linux/kernel.h>
 21 #include <linux/notifier.h>
 22 #include <linux/reboot.h>
 23 #include <linux/serial_8250.h>
 24 #include <linux/serial_reg.h>
 25 
 26 #include <mach/hardware.h>
 27 #include <asm/mach-types.h>
 28 #include <asm/mach/arch.h>
 29 #include <asm/mach/flash.h>
 30 #include <asm/mach/map.h>
 31 
 32 #include <mach/common.h>
 33 #include <mach/gpio.h>
 34 #include <mach/mux.h>
 35 #include <mach/tc.h>
 36 #include <mach/usb.h>
 37 
 38 static struct plat_serial8250_port voiceblue_ports[] = {
 39         {
 40                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
 41                 .irq            = OMAP_GPIO_IRQ(12),
 42                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 43                 .iotype         = UPIO_MEM,
 44                 .regshift       = 1,
 45                 .uartclk        = 3686400,
 46         },
 47         {
 48                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
 49                 .irq            = OMAP_GPIO_IRQ(13),
 50                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 51                 .iotype         = UPIO_MEM,
 52                 .regshift       = 1,
 53                 .uartclk        = 3686400,
 54         },
 55         {
 56                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
 57                 .irq            = OMAP_GPIO_IRQ(14),
 58                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 59                 .iotype         = UPIO_MEM,
 60                 .regshift       = 1,
 61                 .uartclk        = 3686400,
 62         },
 63         {
 64                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
 65                 .irq            = OMAP_GPIO_IRQ(15),
 66                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 67                 .iotype         = UPIO_MEM,
 68                 .regshift       = 1,
 69                 .uartclk        = 3686400,
 70         },
 71         { },
 72 };
 73 
 74 static struct platform_device serial_device = {
 75         .name                   = "serial8250",
 76         .id                     = PLAT8250_DEV_PLATFORM1,
 77         .dev                    = {
 78                 .platform_data  = voiceblue_ports,
 79         },
 80 };
 81 
 82 static int __init ext_uart_init(void)
 83 {
 84         return platform_device_register(&serial_device);
 85 }
 86 arch_initcall(ext_uart_init);
 87 
 88 static struct flash_platform_data voiceblue_flash_data = {
 89         .map_name       = "cfi_probe",
 90         .width          = 2,
 91 };
 92 
 93 static struct resource voiceblue_flash_resource = {
 94         .start  = OMAP_CS0_PHYS,
 95         .end    = OMAP_CS0_PHYS + SZ_32M - 1,
 96         .flags  = IORESOURCE_MEM,
 97 };
 98 
 99 static struct platform_device voiceblue_flash_device = {
100         .name           = "omapflash",
101         .id             = 0,
102         .dev            = {
103                 .platform_data  = &voiceblue_flash_data,
104         },
105         .num_resources  = 1,
106         .resource       = &voiceblue_flash_resource,
107 };
108 
109 static struct resource voiceblue_smc91x_resources[] = {
110         [0] = {
111                 .start  = OMAP_CS2_PHYS + 0x300,
112                 .end    = OMAP_CS2_PHYS + 0x300 + 16,
113                 .flags  = IORESOURCE_MEM,
114         },
115         [1] = {
116                 .start  = OMAP_GPIO_IRQ(8),
117                 .end    = OMAP_GPIO_IRQ(8),
118                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
119         },
120 };
121 
122 static struct platform_device voiceblue_smc91x_device = {
123         .name           = "smc91x",
124         .id             = 0,
125         .num_resources  = ARRAY_SIZE(voiceblue_smc91x_resources),
126         .resource       = voiceblue_smc91x_resources,
127 };
128 
129 static struct platform_device *voiceblue_devices[] __initdata = {
130         &voiceblue_flash_device,
131         &voiceblue_smc91x_device,
132 };
133 
134 static struct omap_usb_config voiceblue_usb_config __initdata = {
135         .hmc_mode       = 3,
136         .register_host  = 1,
137         .register_dev   = 1,
138         .pins[0]        = 2,
139         .pins[1]        = 6,
140         .pins[2]        = 6,
141 };
142 
143 static struct omap_uart_config voiceblue_uart_config __initdata = {
144         .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
145 };
146 
147 static struct omap_board_config_kernel voiceblue_config[] = {
148         { OMAP_TAG_UART, &voiceblue_uart_config },
149 };
150 
151 static void __init voiceblue_init_irq(void)
152 {
153         omap1_init_common_hw();
154         omap_init_irq();
155         omap_gpio_init();
156 }
157 
158 static void __init voiceblue_init(void)
159 {
160         /* Watchdog */
161         gpio_request(0, "Watchdog");
162         /* smc91x reset */
163         gpio_request(7, "SMC91x reset");
164         gpio_direction_output(7, 1);
165         udelay(2);      /* wait at least 100ns */
166         gpio_set_value(7, 0);
167         mdelay(50);     /* 50ms until PHY ready */
168         /* smc91x interrupt pin */
169         gpio_request(8, "SMC91x irq");
170         /* 16C554 reset*/
171         gpio_request(6, "16C554 reset");
172         gpio_direction_output(6, 0);
173         /* 16C554 interrupt pins */
174         gpio_request(12, "16C554 irq");
175         gpio_request(13, "16C554 irq");
176         gpio_request(14, "16C554 irq");
177         gpio_request(15, "16C554 irq");
178         set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
179         set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
180         set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
181         set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
182 
183         platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
184         omap_board_config = voiceblue_config;
185         omap_board_config_size = ARRAY_SIZE(voiceblue_config);
186         omap_serial_init();
187         omap_usb_init(&voiceblue_usb_config);
188         omap_register_i2c_bus(1, 100, NULL, 0);
189 
190         /* There is a good chance board is going up, so enable power LED
191          * (it is connected through invertor) */
192         omap_writeb(0x00, OMAP_LPG1_LCR);
193         omap_writeb(0x00, OMAP_LPG1_PMR);       /* Disable clock */
194 }
195 
196 static void __init voiceblue_map_io(void)
197 {
198         omap1_map_common_io();
199 }
200 
201 #define MACHINE_PANICED         1
202 #define MACHINE_REBOOTING       2
203 #define MACHINE_REBOOT          4
204 static unsigned long machine_state;
205 
206 static int panic_event(struct notifier_block *this, unsigned long event,
207          void *ptr)
208 {
209         if (test_and_set_bit(MACHINE_PANICED, &machine_state))
210                 return NOTIFY_DONE;
211 
212         /* Flash power LED */
213         omap_writeb(0x78, OMAP_LPG1_LCR);
214         omap_writeb(0x01, OMAP_LPG1_PMR);       /* Enable clock */
215 
216         return NOTIFY_DONE;
217 }
218 
219 static struct notifier_block panic_block = {
220         .notifier_call  = panic_event,
221 };
222 
223 static int __init voiceblue_setup(void)
224 {
225         /* Setup panic notifier */
226         atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
227 
228         return 0;
229 }
230 postcore_initcall(voiceblue_setup);
231 
232 static int wdt_gpio_state;
233 
234 void voiceblue_wdt_enable(void)
235 {
236         gpio_direction_output(0, 0);
237         gpio_set_value(0, 1);
238         gpio_set_value(0, 0);
239         wdt_gpio_state = 0;
240 }
241 
242 void voiceblue_wdt_disable(void)
243 {
244         gpio_set_value(0, 0);
245         gpio_set_value(0, 1);
246         gpio_set_value(0, 0);
247         gpio_direction_input(0);
248 }
249 
250 void voiceblue_wdt_ping(void)
251 {
252         if (test_bit(MACHINE_REBOOT, &machine_state))
253                 return;
254 
255         wdt_gpio_state = !wdt_gpio_state;
256         gpio_set_value(0, wdt_gpio_state);
257 }
258 
259 void voiceblue_reset(void)
260 {
261         set_bit(MACHINE_REBOOT, &machine_state);
262         voiceblue_wdt_enable();
263         while (1) ;
264 }
265 
266 EXPORT_SYMBOL(voiceblue_wdt_enable);
267 EXPORT_SYMBOL(voiceblue_wdt_disable);
268 EXPORT_SYMBOL(voiceblue_wdt_ping);
269 
270 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
271         /* Maintainer: Ladislav Michl <michl@2n.cz> */
272         .phys_io        = 0xfff00000,
273         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
274         .boot_params    = 0x10000100,
275         .map_io         = voiceblue_map_io,
276         .init_irq       = voiceblue_init_irq,
277         .init_machine   = voiceblue_init,
278         .timer          = &omap_timer,
279 MACHINE_END
280 
  This page was automatically generated by the LXR engine.