1 /*
2 * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
3 *
4 * Marvell RD-78x00-mASA Development Board Setup
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/ata_platform.h>
15 #include <linux/mv643xx_eth.h>
16 #include <linux/ethtool.h>
17 #include <mach/mv78xx0.h>
18 #include <asm/mach-types.h>
19 #include <asm/mach/arch.h>
20 #include "common.h"
21
22 static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
23 .phy_addr = MV643XX_ETH_PHY_ADDR(8),
24 };
25
26 static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
27 .phy_addr = MV643XX_ETH_PHY_ADDR(9),
28 };
29
30 static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
31 };
32
33 static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
34 };
35
36 static struct mv_sata_platform_data rd78x00_masa_sata_data = {
37 .n_ports = 2,
38 };
39
40 static void __init rd78x00_masa_init(void)
41 {
42 /*
43 * Basic MV78x00 setup. Needs to be called early.
44 */
45 mv78xx0_init();
46
47 /*
48 * Partition on-chip peripherals between the two CPU cores.
49 */
50 if (mv78xx0_core_index() == 0) {
51 mv78xx0_ehci0_init();
52 mv78xx0_ehci1_init();
53 mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
54 mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
55 mv78xx0_sata_init(&rd78x00_masa_sata_data);
56 mv78xx0_uart0_init();
57 mv78xx0_uart2_init();
58 } else {
59 mv78xx0_ehci2_init();
60 mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
61 mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
62 mv78xx0_uart1_init();
63 mv78xx0_uart3_init();
64 }
65 }
66
67 static int __init rd78x00_pci_init(void)
68 {
69 /*
70 * Assign all PCIe devices to CPU core #0.
71 */
72 if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
73 mv78xx0_pcie_init(1, 1);
74
75 return 0;
76 }
77 subsys_initcall(rd78x00_pci_init);
78
79 MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
80 /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
81 .phys_io = MV78XX0_REGS_PHYS_BASE,
82 .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
83 .boot_params = 0x00000100,
84 .init_machine = rd78x00_masa_init,
85 .map_io = mv78xx0_map_io,
86 .init_irq = mv78xx0_init_irq,
87 .timer = &mv78xx0_timer,
88 MACHINE_END
89
|
This page was automatically generated by the
LXR engine.
|