Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * arch/arm/mach-ixp23xx/roadrunner.c
  3  *
  4  * RoadRunner board-specific routines
  5  *
  6  * Author: Deepak Saxena <dsaxena@plexity.net>
  7  *
  8  * Copyright 2005 (c) MontaVista Software, Inc.
  9  *
 10  * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
 11  *
 12  * This file is licensed under the terms of the GNU General Public
 13  * License version 2. This program is licensed "as is" without any
 14  * warranty of any kind, whether express or implied.
 15  */
 16 
 17 #include <linux/kernel.h>
 18 #include <linux/init.h>
 19 #include <linux/spinlock.h>
 20 #include <linux/sched.h>
 21 #include <linux/interrupt.h>
 22 #include <linux/serial.h>
 23 #include <linux/tty.h>
 24 #include <linux/bitops.h>
 25 #include <linux/ioport.h>
 26 #include <linux/serial_8250.h>
 27 #include <linux/serial_core.h>
 28 #include <linux/device.h>
 29 #include <linux/mm.h>
 30 #include <linux/pci.h>
 31 #include <linux/mtd/physmap.h>
 32 
 33 #include <asm/types.h>
 34 #include <asm/setup.h>
 35 #include <asm/memory.h>
 36 #include <mach/hardware.h>
 37 #include <asm/mach-types.h>
 38 #include <asm/irq.h>
 39 #include <asm/system.h>
 40 #include <asm/tlbflush.h>
 41 #include <asm/pgtable.h>
 42 
 43 #include <asm/mach/map.h>
 44 #include <asm/mach/irq.h>
 45 #include <asm/mach/arch.h>
 46 #include <asm/mach/pci.h>
 47 
 48 /*
 49  * Interrupt mapping
 50  */
 51 #define INTA            IRQ_ROADRUNNER_PCI_INTA
 52 #define INTB            IRQ_ROADRUNNER_PCI_INTB
 53 #define INTC            IRQ_ROADRUNNER_PCI_INTC
 54 #define INTD            IRQ_ROADRUNNER_PCI_INTD
 55 
 56 #define INTC_PIN        IXP23XX_GPIO_PIN_11
 57 #define INTD_PIN        IXP23XX_GPIO_PIN_12
 58 
 59 static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 60 {
 61         static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
 62         static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
 63         static int usb_irq[] = {INTB, INTC, INTD, -1};
 64         static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
 65         static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
 66 
 67         switch(dev->bus->number) {
 68                 case 0:
 69                         switch(dev->devfn) {
 70                         case 0x0: // PCI-PCI bridge
 71                                 break;
 72                         case 0x8: // PCI Card Slot
 73                                 return pci_card_slot_irq[pin - 1];
 74                         case 0x10: // PMC Slot
 75                                 return pmc_card_slot_irq[pin - 1];
 76                         case 0x18: // PMC Slot Secondary Agent
 77                                 break;
 78                         case 0x20: // IXP Processor
 79                                 break;
 80                         default:
 81                                 return NO_IRQ;
 82                         }
 83                         break;
 84 
 85                 case 1:
 86                         switch(dev->devfn) {
 87                         case 0x0: // IDE Controller
 88                                 return (pin == 1) ? INTC : -1;
 89                         case 0x8: // USB fun 0
 90                         case 0x9: // USB fun 1
 91                         case 0xa: // USB fun 2
 92                                 return usb_irq[pin - 1];
 93                         case 0x10: // Mini PCI 1
 94                                 return mini_pci_1_irq[pin-1];
 95                         case 0x18: // Mini PCI 2
 96                                 return mini_pci_2_irq[pin-1];
 97                         case 0x20: // MEM slot
 98                                 return (pin == 1) ? INTA : -1;
 99                         default:
100                                 return NO_IRQ;
101                         }
102                         break;
103 
104                 default:
105                         return NO_IRQ;
106         }
107 
108         return NO_IRQ;
109 }
110 
111 static void __init roadrunner_pci_preinit(void)
112 {
113         set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
114         set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
115 
116         ixp23xx_pci_preinit();
117 }
118 
119 static struct hw_pci roadrunner_pci __initdata = {
120         .nr_controllers = 1,
121         .preinit        = roadrunner_pci_preinit,
122         .setup          = ixp23xx_pci_setup,
123         .scan           = ixp23xx_pci_scan_bus,
124         .map_irq        = roadrunner_map_irq,
125 };
126 
127 static int __init roadrunner_pci_init(void)
128 {
129         if (machine_is_roadrunner())
130                 pci_common_init(&roadrunner_pci);
131 
132         return 0;
133 };
134 
135 subsys_initcall(roadrunner_pci_init);
136 
137 static struct physmap_flash_data roadrunner_flash_data = {
138         .width          = 2,
139 };
140 
141 static struct resource roadrunner_flash_resource = {
142         .start          = 0x90000000,
143         .end            = 0x93ffffff,
144         .flags          = IORESOURCE_MEM,
145 };
146 
147 static struct platform_device roadrunner_flash = {
148         .name           = "physmap-flash",
149         .id             = 0,
150         .dev            = {
151                 .platform_data  = &roadrunner_flash_data,
152         },
153         .num_resources  = 1,
154         .resource       = &roadrunner_flash_resource,
155 };
156 
157 static void __init roadrunner_init(void)
158 {
159         platform_device_register(&roadrunner_flash);
160 
161         /*
162          * Mark flash as writeable
163          */
164         IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
165         IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
166         IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
167         IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
168 
169         ixp23xx_sys_init();
170 }
171 
172 MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
173         /* Maintainer: Deepak Saxena */
174         .phys_io        = IXP23XX_PERIPHERAL_PHYS,
175         .io_pg_offst    = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
176         .map_io         = ixp23xx_map_io,
177         .init_irq       = ixp23xx_init_irq,
178         .timer          = &ixp23xx_timer,
179         .boot_params    = 0x00000100,
180         .init_machine   = roadrunner_init,
181 MACHINE_END
182 
  This page was automatically generated by the LXR engine.