Linux kernel & device driver programming

Cross-Referenced Linux and Device Driver Code

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ]
Version: [ 2.6.11.8 ] [ 2.6.25 ] [ 2.6.25.8 ] [ 2.6.31.13 ] Architecture: [ i386 ]
  1 /*
  2  * arch/arm/mach-iop33x/iq80331.c
  3  *
  4  * Board support code for the Intel IQ80331 platform.
  5  *
  6  * Author: Dave Jiang <dave.jiang@intel.com>
  7  * Copyright (C) 2003 Intel Corp.
  8  *
  9  * This program is free software; you can redistribute it and/or modify it
 10  * under the terms of the GNU General Public License as published by the
 11  * Free Software Foundation; either version 2 of the License, or (at your
 12  * option) any later version.
 13  */
 14 
 15 #include <linux/mm.h>
 16 #include <linux/init.h>
 17 #include <linux/kernel.h>
 18 #include <linux/pci.h>
 19 #include <linux/string.h>
 20 #include <linux/slab.h>
 21 #include <linux/serial_core.h>
 22 #include <linux/serial_8250.h>
 23 #include <linux/mtd/physmap.h>
 24 #include <linux/platform_device.h>
 25 #include <linux/io.h>
 26 #include <mach/hardware.h>
 27 #include <asm/irq.h>
 28 #include <asm/mach/arch.h>
 29 #include <asm/mach/map.h>
 30 #include <asm/mach/pci.h>
 31 #include <asm/mach/time.h>
 32 #include <asm/mach-types.h>
 33 #include <asm/page.h>
 34 #include <asm/pgtable.h>
 35 #include <mach/time.h>
 36 
 37 /*
 38  * IQ80331 timer tick configuration.
 39  */
 40 static void __init iq80331_timer_init(void)
 41 {
 42         /* D-Step parts run at a higher internal bus frequency */
 43         if (*IOP3XX_ATURID >= 0xa)
 44                 iop_init_time(333000000);
 45         else
 46                 iop_init_time(266000000);
 47 }
 48 
 49 static struct sys_timer iq80331_timer = {
 50         .init           = iq80331_timer_init,
 51         .offset         = iop_gettimeoffset,
 52 };
 53 
 54 
 55 /*
 56  * IQ80331 PCI.
 57  */
 58 static int __init
 59 iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 60 {
 61         int irq;
 62 
 63         if (slot == 1 && pin == 1) {
 64                 /* PCI-X Slot INTA */
 65                 irq = IRQ_IOP33X_XINT1;
 66         } else if (slot == 1 && pin == 2) {
 67                 /* PCI-X Slot INTB */
 68                 irq = IRQ_IOP33X_XINT2;
 69         } else if (slot == 1 && pin == 3) {
 70                 /* PCI-X Slot INTC */
 71                 irq = IRQ_IOP33X_XINT3;
 72         } else if (slot == 1 && pin == 4) {
 73                 /* PCI-X Slot INTD */
 74                 irq = IRQ_IOP33X_XINT0;
 75         } else if (slot == 2) {
 76                 /* GigE */
 77                 irq = IRQ_IOP33X_XINT2;
 78         } else {
 79                 printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
 80                         "device PCI:%d:%d:%d\n", dev->bus->number,
 81                         PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
 82                 irq = -1;
 83         }
 84 
 85         return irq;
 86 }
 87 
 88 static struct hw_pci iq80331_pci __initdata = {
 89         .swizzle        = pci_std_swizzle,
 90         .nr_controllers = 1,
 91         .setup          = iop3xx_pci_setup,
 92         .preinit        = iop3xx_pci_preinit_cond,
 93         .scan           = iop3xx_pci_scan_bus,
 94         .map_irq        = iq80331_pci_map_irq,
 95 };
 96 
 97 static int __init iq80331_pci_init(void)
 98 {
 99         if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
100                 machine_is_iq80331())
101                 pci_common_init(&iq80331_pci);
102 
103         return 0;
104 }
105 
106 subsys_initcall(iq80331_pci_init);
107 
108 
109 /*
110  * IQ80331 machine initialisation.
111  */
112 static struct physmap_flash_data iq80331_flash_data = {
113         .width          = 1,
114 };
115 
116 static struct resource iq80331_flash_resource = {
117         .start          = 0xc0000000,
118         .end            = 0xc07fffff,
119         .flags          = IORESOURCE_MEM,
120 };
121 
122 static struct platform_device iq80331_flash_device = {
123         .name           = "physmap-flash",
124         .id             = 0,
125         .dev            = {
126                 .platform_data  = &iq80331_flash_data,
127         },
128         .num_resources  = 1,
129         .resource       = &iq80331_flash_resource,
130 };
131 
132 static void __init iq80331_init_machine(void)
133 {
134         platform_device_register(&iop3xx_i2c0_device);
135         platform_device_register(&iop3xx_i2c1_device);
136         platform_device_register(&iop33x_uart0_device);
137         platform_device_register(&iop33x_uart1_device);
138         platform_device_register(&iq80331_flash_device);
139         platform_device_register(&iop3xx_dma_0_channel);
140         platform_device_register(&iop3xx_dma_1_channel);
141         platform_device_register(&iop3xx_aau_channel);
142 }
143 
144 MACHINE_START(IQ80331, "Intel IQ80331")
145         /* Maintainer: Intel Corp. */
146         .phys_io        = 0xfefff000,
147         .io_pg_offst    = ((0xfffff000) >> 18) & 0xfffc,
148         .boot_params    = 0x00000100,
149         .map_io         = iop3xx_map_io,
150         .init_irq       = iop33x_init_irq,
151         .timer          = &iq80331_timer,
152         .init_machine   = iq80331_init_machine,
153 MACHINE_END
154 
  This page was automatically generated by the LXR engine.