Diff markup
1 /* Special Initializers for certain USB Mass S 1 /* Special Initializers for certain USB Mass Storage devices
2 * 2 *
3 * $Id: initializers.c,v 1.2 2000/09/06 22:35: <<
4 * <<
5 * Current development and maintenance by: 3 * Current development and maintenance by:
6 * (c) 1999, 2000 Matthew Dharm (mdharm-usb@ 4 * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
7 * 5 *
8 * This driver is based on the 'USB Mass Stora 6 * This driver is based on the 'USB Mass Storage Class' document. This
9 * describes in detail the protocol used to co 7 * describes in detail the protocol used to communicate with such
10 * devices. Clearly, the designers had SCSI a 8 * devices. Clearly, the designers had SCSI and ATAPI commands in
11 * mind when they created this document. The 9 * mind when they created this document. The commands are all very
12 * similar to commands in the SCSI-II and ATAP 10 * similar to commands in the SCSI-II and ATAPI specifications.
13 * 11 *
14 * It is important to note that in a number of 12 * It is important to note that in a number of cases this class
15 * exhibits class-specific exemptions from the 13 * exhibits class-specific exemptions from the USB specification.
16 * Notably the usage of NAK, STALL and ACK dif 14 * Notably the usage of NAK, STALL and ACK differs from the norm, in
17 * that they are used to communicate wait, fai 15 * that they are used to communicate wait, failed and OK on commands.
18 * 16 *
19 * Also, for certain devices, the interrupt en 17 * Also, for certain devices, the interrupt endpoint is used to convey
20 * status of a command. 18 * status of a command.
21 * 19 *
22 * Please see http://www.one-eyed-alien.net/~m 20 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
23 * information about this driver. 21 * information about this driver.
24 * 22 *
25 * This program is free software; you can redi 23 * This program is free software; you can redistribute it and/or modify it
26 * under the terms of the GNU General Public L 24 * under the terms of the GNU General Public License as published by the
27 * Free Software Foundation; either version 2, 25 * Free Software Foundation; either version 2, or (at your option) any
28 * later version. 26 * later version.
29 * 27 *
30 * This program is distributed in the hope tha 28 * This program is distributed in the hope that it will be useful, but
31 * WITHOUT ANY WARRANTY; without even the impl 29 * WITHOUT ANY WARRANTY; without even the implied warranty of
32 * MERCHANTABILITY or FITNESS FOR A PARTICULAR 30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
33 * General Public License for more details. 31 * General Public License for more details.
34 * 32 *
35 * You should have received a copy of the GNU 33 * You should have received a copy of the GNU General Public License along
36 * with this program; if not, write to the Fre 34 * with this program; if not, write to the Free Software Foundation, Inc.,
37 * 675 Mass Ave, Cambridge, MA 02139, USA. 35 * 675 Mass Ave, Cambridge, MA 02139, USA.
38 */ 36 */
39 37
40 #include <linux/errno.h> 38 #include <linux/errno.h>
41 39
42 #include "usb.h" 40 #include "usb.h"
43 #include "initializers.h" 41 #include "initializers.h"
44 #include "debug.h" 42 #include "debug.h"
45 #include "transport.h" 43 #include "transport.h"
46 44
47 /* This places the Shuttle/SCM USB<->SCSI brid 45 /* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
48 * mode */ 46 * mode */
49 int usb_stor_euscsi_init(struct us_data *us) 47 int usb_stor_euscsi_init(struct us_data *us)
50 { 48 {
51 int result; 49 int result;
52 50
53 US_DEBUGP("Attempting to init eUSCSI b 51 US_DEBUGP("Attempting to init eUSCSI bridge...\n");
54 us->iobuf[0] = 0x1; 52 us->iobuf[0] = 0x1;
55 result = usb_stor_control_msg(us, us-> 53 result = usb_stor_control_msg(us, us->send_ctrl_pipe,
56 0x0C, USB_RECIP_INTERF 54 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
57 0x01, 0x0, us->iobuf, !! 55 0x01, 0x0, us->iobuf, 0x1, 5000);
58 US_DEBUGP("-- result is %d\n", result) 56 US_DEBUGP("-- result is %d\n", result);
59 57
60 return 0; 58 return 0;
61 } 59 }
62 60
63 /* This function is required to activate all f 61 /* This function is required to activate all four slots on the UCR-61S2B
64 * flash reader */ 62 * flash reader */
65 int usb_stor_ucr61s2b_init(struct us_data *us) 63 int usb_stor_ucr61s2b_init(struct us_data *us)
66 { 64 {
67 struct bulk_cb_wrap *bcb = (struct bul 65 struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf;
68 struct bulk_cs_wrap *bcs = (struct bul 66 struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap*) us->iobuf;
69 int res; 67 int res;
70 unsigned int partial; 68 unsigned int partial;
71 static char init_string[] = "\xec\x0a\ 69 static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS";
72 70
73 US_DEBUGP("Sending UCR-61S2B initializ 71 US_DEBUGP("Sending UCR-61S2B initialization packet...\n");
74 72
75 bcb->Signature = cpu_to_le32(US_BULK_C 73 bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
76 bcb->Tag = 0; 74 bcb->Tag = 0;
77 bcb->DataTransferLength = cpu_to_le32( 75 bcb->DataTransferLength = cpu_to_le32(0);
78 bcb->Flags = bcb->Lun = 0; 76 bcb->Flags = bcb->Lun = 0;
79 bcb->Length = sizeof(init_string) - 1; 77 bcb->Length = sizeof(init_string) - 1;
80 memset(bcb->CDB, 0, sizeof(bcb->CDB)); 78 memset(bcb->CDB, 0, sizeof(bcb->CDB));
81 memcpy(bcb->CDB, init_string, sizeof(i 79 memcpy(bcb->CDB, init_string, sizeof(init_string) - 1);
82 80
83 res = usb_stor_bulk_transfer_buf(us, u 81 res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
84 US_BULK_CB_WRAP_LEN, & 82 US_BULK_CB_WRAP_LEN, &partial);
85 if(res) !! 83 if (res)
86 return res; !! 84 return -EIO;
87 85
88 US_DEBUGP("Getting status packet...\n" 86 US_DEBUGP("Getting status packet...\n");
89 res = usb_stor_bulk_transfer_buf(us, u 87 res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
90 US_BULK_CS_WRAP_LEN, & 88 US_BULK_CS_WRAP_LEN, &partial);
>> 89 if (res)
>> 90 return -EIO;
91 91
92 return (res ? -1 : 0); !! 92 return 0;
93 } 93 }
94 94
95 /* This places the HUAWEI E220 devices in mult 95 /* This places the HUAWEI E220 devices in multi-port mode */
96 int usb_stor_huawei_e220_init(struct us_data * 96 int usb_stor_huawei_e220_init(struct us_data *us)
97 { 97 {
98 int result; 98 int result;
99 99
100 us->iobuf[0] = 0x1; <<
101 result = usb_stor_control_msg(us, us-> 100 result = usb_stor_control_msg(us, us->send_ctrl_pipe,
102 USB_REQ_ 101 USB_REQ_SET_FEATURE,
103 USB_TYPE 102 USB_TYPE_STANDARD | USB_RECIP_DEVICE,
104 0x01, 0x !! 103 0x01, 0x0, NULL, 0x0, 1000);
105 US_DEBUGP("usb_control_msg performing !! 104 US_DEBUGP("Huawei mode set result is %d\n", result);
106 return (result ? 0 : -1); !! 105 return 0;
107 } 106 }
108 107
|
This page was automatically generated by the
LXR engine.
|