Diff markup
1 /* Special Initializers for certain USB Mass S 1 /* Special Initializers for certain USB Mass Storage devices
2 * 2 *
3 * $Id: initializers.c,v 1.2 2000/09/06 22:35: 3 * $Id: initializers.c,v 1.2 2000/09/06 22:35:57 mdharm Exp $
4 * 4 *
5 * Current development and maintenance by: 5 * Current development and maintenance by:
6 * (c) 1999, 2000 Matthew Dharm (mdharm-usb@ 6 * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
7 * 7 *
8 * This driver is based on the 'USB Mass Stora 8 * This driver is based on the 'USB Mass Storage Class' document. This
9 * describes in detail the protocol used to co 9 * describes in detail the protocol used to communicate with such
10 * devices. Clearly, the designers had SCSI a 10 * devices. Clearly, the designers had SCSI and ATAPI commands in
11 * mind when they created this document. The 11 * mind when they created this document. The commands are all very
12 * similar to commands in the SCSI-II and ATAP 12 * similar to commands in the SCSI-II and ATAPI specifications.
13 * 13 *
14 * It is important to note that in a number of 14 * It is important to note that in a number of cases this class
15 * exhibits class-specific exemptions from the 15 * exhibits class-specific exemptions from the USB specification.
16 * Notably the usage of NAK, STALL and ACK dif 16 * Notably the usage of NAK, STALL and ACK differs from the norm, in
17 * that they are used to communicate wait, fai 17 * that they are used to communicate wait, failed and OK on commands.
18 * 18 *
19 * Also, for certain devices, the interrupt en 19 * Also, for certain devices, the interrupt endpoint is used to convey
20 * status of a command. 20 * status of a command.
21 * 21 *
22 * Please see http://www.one-eyed-alien.net/~m 22 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
23 * information about this driver. 23 * information about this driver.
24 * 24 *
25 * This program is free software; you can redi 25 * This program is free software; you can redistribute it and/or modify it
26 * under the terms of the GNU General Public L 26 * under the terms of the GNU General Public License as published by the
27 * Free Software Foundation; either version 2, 27 * Free Software Foundation; either version 2, or (at your option) any
28 * later version. 28 * later version.
29 * 29 *
30 * This program is distributed in the hope tha 30 * This program is distributed in the hope that it will be useful, but
31 * WITHOUT ANY WARRANTY; without even the impl 31 * WITHOUT ANY WARRANTY; without even the implied warranty of
32 * MERCHANTABILITY or FITNESS FOR A PARTICULAR 32 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
33 * General Public License for more details. 33 * General Public License for more details.
34 * 34 *
35 * You should have received a copy of the GNU 35 * You should have received a copy of the GNU General Public License along
36 * with this program; if not, write to the Fre 36 * with this program; if not, write to the Free Software Foundation, Inc.,
37 * 675 Mass Ave, Cambridge, MA 02139, USA. 37 * 675 Mass Ave, Cambridge, MA 02139, USA.
38 */ 38 */
39 39
>> 40 #include <linux/sched.h>
40 #include <linux/errno.h> 41 #include <linux/errno.h>
41 <<
42 #include "usb.h" <<
43 #include "initializers.h" 42 #include "initializers.h"
44 #include "debug.h" 43 #include "debug.h"
45 #include "transport.h" 44 #include "transport.h"
46 45
47 /* This places the Shuttle/SCM USB<->SCSI brid 46 /* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
48 * mode */ 47 * mode */
49 int usb_stor_euscsi_init(struct us_data *us) 48 int usb_stor_euscsi_init(struct us_data *us)
50 { 49 {
51 int result; 50 int result;
52 51
53 US_DEBUGP("Attempting to init eUSCSI b 52 US_DEBUGP("Attempting to init eUSCSI bridge...\n");
54 us->iobuf[0] = 0x1; 53 us->iobuf[0] = 0x1;
55 result = usb_stor_control_msg(us, us-> 54 result = usb_stor_control_msg(us, us->send_ctrl_pipe,
56 0x0C, USB_RECIP_INTERF 55 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
57 0x01, 0x0, us->iobuf, 56 0x01, 0x0, us->iobuf, 0x1, 5*HZ);
58 US_DEBUGP("-- result is %d\n", result) 57 US_DEBUGP("-- result is %d\n", result);
59 58
60 return 0; 59 return 0;
61 } 60 }
62 61
63 /* This function is required to activate all f 62 /* This function is required to activate all four slots on the UCR-61S2B
64 * flash reader */ 63 * flash reader */
65 int usb_stor_ucr61s2b_init(struct us_data *us) 64 int usb_stor_ucr61s2b_init(struct us_data *us)
66 { 65 {
67 struct bulk_cb_wrap *bcb = (struct bul 66 struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap*) us->iobuf;
68 struct bulk_cs_wrap *bcs = (struct bul 67 struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap*) us->iobuf;
69 int res; !! 68 int res, partial;
70 unsigned int partial; <<
71 static char init_string[] = "\xec\x0a\ 69 static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS";
72 70
73 US_DEBUGP("Sending UCR-61S2B initializ 71 US_DEBUGP("Sending UCR-61S2B initialization packet...\n");
74 72
75 bcb->Signature = cpu_to_le32(US_BULK_C 73 bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
76 bcb->Tag = 0; 74 bcb->Tag = 0;
77 bcb->DataTransferLength = cpu_to_le32( 75 bcb->DataTransferLength = cpu_to_le32(0);
78 bcb->Flags = bcb->Lun = 0; 76 bcb->Flags = bcb->Lun = 0;
79 bcb->Length = sizeof(init_string) - 1; 77 bcb->Length = sizeof(init_string) - 1;
80 memset(bcb->CDB, 0, sizeof(bcb->CDB)); 78 memset(bcb->CDB, 0, sizeof(bcb->CDB));
81 memcpy(bcb->CDB, init_string, sizeof(i 79 memcpy(bcb->CDB, init_string, sizeof(init_string) - 1);
82 80
83 res = usb_stor_bulk_transfer_buf(us, u 81 res = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb,
84 US_BULK_CB_WRAP_LEN, & 82 US_BULK_CB_WRAP_LEN, &partial);
85 if(res) 83 if(res)
86 return res; 84 return res;
87 85
88 US_DEBUGP("Getting status packet...\n" 86 US_DEBUGP("Getting status packet...\n");
89 res = usb_stor_bulk_transfer_buf(us, u 87 res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs,
90 US_BULK_CS_WRAP_LEN, & 88 US_BULK_CS_WRAP_LEN, &partial);
91 89
92 return (res ? -1 : 0); 90 return (res ? -1 : 0);
93 } 91 }
94 <<
95 /* This places the HUAWEI E220 devices in mult <<
96 int usb_stor_huawei_e220_init(struct us_data * <<
97 { <<
98 int result; <<
99 <<
100 us->iobuf[0] = 0x1; <<
101 result = usb_stor_control_msg(us, us-> <<
102 USB_REQ_ <<
103 USB_TYPE <<
104 0x01, 0x <<
105 US_DEBUGP("usb_control_msg performing <<
106 return (result ? 0 : -1); <<
107 } <<
108 92
|
This page was automatically generated by the
LXR engine.
|